deckshield - flowcrete · deckshield car park decking systems for: 9 exposed decks 9 internal...
TRANSCRIPT
www.flowcrete.ae
DECKSHIELDCar Park Decking Systems for:
9 Exposed Decks 9 Internal Decks 9 Ramps
9 Walkways/Stairwells 9 Demarcation 9 Service Corridors
Multi storey car parks have always been many customers’ first point of contact with commercial destinations, but it is only recently that developers have made efforts to improve the quality of the car park experience.
Although often underestimated, the correct specification of waterproofing and surfacing materials is critical, within the car park environment, to delivering a long-term, structurally protected and safe facility for car park operators and vehicle owners.
Flowcrete Middle East’s Deckshield range offers a number of colourful deck coating solutions geared up to provide slip-resistance, durability and an excellent service life as well as stand-up to common car park problems.
Deckshield Range Technical Profile
Application Suitability
Product SelectorEach parking facility consists of a range of zones or areas and requires a number of surface applications as a result. Flowcrete offers a wide range of flooring products to meet the surface requirements of the entire car park as well as neighbouring zones.
Exposed Decks Internal Decks Ramps
Instructional Signage Demarcation Kerbs/Islands
Line Marking
Multi-storey Top Deck
RampsMulti-storey
Internal Deck
Stairways
Turning Circles
Stair Landings
Entrance to Shopping Malls
Rubber Accessories
The applied colours may differ from the examples shown. For a full colour chart and samples, contact your local Flowcrete office.
** C
ure
times
at t
empe
ratu
res
betw
een
0-30
˚C c
an b
e ac
hiev
ed b
y al
terin
g th
e qu
antit
y of
cat
alys
t use
d.
For
appl
icat
ions
falli
ng o
utsi
de o
f thi
s te
mpe
ratu
re r
ange
, ple
ase
cont
act y
our
loca
l Flo
wcr
ete
Tech
nica
l Dep
artm
ent.
*Assumes concrete compressive strength is greater than 25N/mm2
Technical Profile
TEMPERATURE RESISTANCE
Softens over 70˚C, hardens on cooling
WATER PERMEABILITY
Karsten Test Nil (Impermeable)
RESISTANCE TO CHLORIDE IONS
DOT BD47/94: Appendix BMethod B4,2(d).
No chloride ion penetration after 28 days
BOND STRENGTH
ASTM D4541 (Pull-Off Test) >1.5 MPa*
FIRE RESISTANCE
BS 476-3 Designated EXT.F.AA
SLIP RESISTANCE
TRRL Pendulum Slip Test Dry >40, Wet (dependant on specification)
ABRASION RESISTANCE
Taber Abrader 0.1mg loss per 1000 cycles (1kg Load using CS17 wheels)
VOC CONTENT
ISO 11890-2 Very low <20 g/L
SPEED OF CURE** 10˚C 20˚C 30˚C
Light Traffic 30 hrs 18 hrs 12 hrs
Full Traffic 48 hrs 36 hrs 24 hrs
Full Chemical Cure 12 days 7 days 6 days
Reduces Noise: Minimises unwanted noise from tyre squeal.
Fire Resistant: Delivers impressive resistance to the spread of flames.
Deckshield ID is a low VOC polyurethane car park deck coating system for intermediate decks of multi-storey structures.
Deckshield ID cosmetically enhances and reduces noise, making multi-storey car parks brighter, safer environments to visit.
Deckshield ID
Standard Colours
Mid GreyLight GreyGreen
BlueLight BlueRed
Dark Grey Black
Environmentally Friendly: Low in Volatile Organic Compounds (VOCs) and solvent free.
Attractive: Brightens up dull, dark and musty car park environments.
Resistant: Excellent resistance to chemicals, fire and has a low slip potential.
Deckshield UV (WB)(optional)
Deckshield Finish
Deckshield Quartz
Deckshield SF Primer
Prepared Substrate
The applied colours may differ from the examples shown. For a full colour chart and samples, contact your local Flowcrete office.
** C
ure
times
at t
empe
ratu
res
betw
een
0-30
˚C c
an b
e ac
hiev
ed b
y al
terin
g th
e qu
antit
y of
cat
alys
t use
d.
For
appl
icat
ions
falli
ng o
utsi
de o
f thi
s te
mpe
ratu
re r
ange
, ple
ase
cont
act y
our
loca
l Flo
wcr
ete
Tech
nica
l Dep
artm
ent.
Technical Profile
TEMPERATURE RESISTANCE
Softens over 70˚C, hardens on cooling
WATER PERMEABILITY
Karsten Test Nil (Impermeable)
RESISTANCE TO CHLORIDE IONS
DOT BD47/94: Appendix BMethod B4,2(d).
No chloride ion penetration after 28 days
BOND STRENGTH
ASTM D4541 (Pull-Off Test) >1.5 MPa*
FIRE RESISTANCE
BS 476-3 Designated EXT.F.AA
SLIP RESISTANCE
TRRL Pendulum Slip Test Dry >40, Wet (dependant on specification)
ABRASION RESISTANCE
Taber Abrader 300mg loss per 1000 cycles (1kg Load using CS17 wheels)
SPEED OF CURE** 10˚C 20˚C 30˚C
Light Traffic 30 hrs 18 hrs 12 hrs
Full Traffic 48 hrs 36 hrs 24 hrs
Full Chemical Cure 12 days 7 days 6 days
*Assumes concrete compressive strength is greater than 25N/mm2
Deckshield ED is a polyurethane car park deck coating system providing a colourful, crack bridging, waterproof surface for exposed decks.
Deckshield ED cosmetically enhances, reduces noise and protects exposed car park decks from the elements.
Deckshield ED
Standard Colours
Mid GreyLight GreyGreen
BlueLight BlueRed
Dark Grey Black
Reduces Noise: Minimises unwanted noise from tyre squeal.
UV Stable:100% UV light stable. Prevents from yellowing effect.
Environmentally Friendly: Low in Volatile Organic Compounds (VOCs) and solvent free.
Attractive: Brightens up dull, dark and musty car park environments.
Resistant: Excellent resistance to chemicals, fire and has a low slip potential.
Deckshield UV Topcoat
Deckshield Quartz
Deckshield Finish
Deckshield ED Membrane
DeckshieldSF Primer
Prepared Substrate
Deckshield SF Bodycoat
The applied colours may differ from the examples shown. For a full colour chart and samples, contact your local Flowcrete office.
** C
ure
times
at t
empe
ratu
res
betw
een
0-30
˚C c
an b
e ac
hiev
ed b
y al
terin
g th
e qu
antit
y of
cat
alys
t use
d.
For
appl
icat
ions
falli
ng o
utsi
de o
f thi
s te
mpe
ratu
re r
ange
, ple
ase
cont
act y
our
loca
l Flo
wcr
ete
Tech
nica
l Dep
artm
ent.
*Assumes concrete compressive strength is greater than 25N/mm2
Technical Profile
TEMPERATURE RESISTANT
Tolerant up to 60°C
WATER PERMEABILITY
Karsten Test Nil (Impermeable)
BOND STRENGTH
ASTM D4541 (Pull-Off Test) >1.5 MPa*
FIRE RESISTANCE
BS476-7 Surface spread of flame: Class 1
SLIP RESISTANCE
TRRL Pendulum Slip Test Dry >40, Wet (dependant on specification)
ABRASION RESISTANCE
Taber Abrader 80mg loss per 1000 cycles (1kg Load using CS10 wheels)
SURFACE HARDNESS
Koenig Hardness Test 180 Seconds
SPEED OF CURE** 10˚C 20˚C 30˚C
Light Traffic 48 hrs 24 hrs 18 hrs
Full Traffic 72 hrs 48 hrs 36 hrs
Full Chemical Cure 12 days 7 days 6 days
Standard Colours
Environmentally Friendly: Low in Volatile Organic Compounds (VOCs) and solvent free.
Attractive: Brightens up dull, dark and musty car park environments.
Durable: Provides excellent resistance to foot and wheeled traffic.
Deckcoat EP is an epoxy car park deck coating system providing a colourful surface for intermediate decks of multi-storey structures.
Deckcoat EP cosmetically enhances and reduces noise, making multi-storey car park decks brighter, safer environments to visit.
Mid GreyLight GreyDark Green
BlueLight BlueDark Red
Deckcoat EP
Dark Grey Black
Deckcoat EP Topcoat
Deckcoat Quartz
DeckcoatEP Primer
Prepared Substrate
Slip Resistant: Positively textured anti-slip surface minimises slip and skid risks.
Fire Resistant: Delivers impressive resistance to the spread of flames.
For
a fu
ll Te
chni
cal P
rofil
e, c
onta
ct y
our
loca
l Tec
hnic
al D
epar
tmen
t.
For
a fu
ll Te
chni
cal P
rofil
e, c
onta
ct y
our
loca
l Tec
hnic
al D
epar
tmen
t.
Technical Profile
COMPRESSIVE STRENGTH
> 60 N/mm2
BOND STRENGTH
Greater than cohesive strength of 25 N/mm2 concrete. >1.5 MPa*
TACK FREE TIME AT 30°C
4 hours
POT LIFE AT 30°C
2 hours
Zero Shrinkage
Resin Rich and Chemical Resistant
Delivers Exceptional Strength
LEED Compliant
Protects Against Carbonation
Light Reflective, Attractive Finish
Deckshield Putty is a high performance, non-sag epoxy putty and repair mortar.
Deckshield Putty is a tough but easily workablecompound that can either be applied by a trowelor spatula. Once cured, it will provide a highstrength and impact resistant finish, ready toreceive suitable finishes.
Deckshield Putty
Technical Profile
MOISTURE VAPOUR PERMEABILITY
Taywood Method Sd = 0.5m
CARBON DIOXIDE DIFFUSION
Taywood Method R(m) = 274
Deckshield Concrecoat is a high performance coating system to compliment Deckshield traffic deckcoating systems.
Deckshield Concrecoat delivers excellent protection against carbonation for interior and exterior walls, columns, soffits and ceilings.
Deckshield Concrecoat
Deckshield ConcrecoatIntermediate Coating
Deckshield ConcrecoatTop Coating
DeckshieldConcrecoat Primer
Prepared Substrate
*Assumes concrete compressive strength is greater than 25N/mm2
*Assumes concrete compressive strength is greater than 25N/mm2
DeckshieldPutty
Substrate
DeckshieldSystem
9 Deckshield Corner Guard
9 Deckshield Speed Guard
9 Deckshield Wall Guard
9 Deckshield Wheel Guard
Deckshield Accessories
Deckshield Accessories are a range of rubber products that promote safety and protection from vehicles when manoeuvring round high traffic parking facilities.
Primarily for use in multi-storey car parks, Deckshield Accessories can also be applied in loading bays, warehouses and other industrial units to protect against vehicular damage.
Good Water Resistance
Suitable for Indoor and Outdoor Use
Weather & UV Resistant
Abrasion Resistant
Provides Excellent Impact Resistance
Technical Profile
HARDNESSASTM D2240 Shore A. 75±5
TENSILE STRENGTHASTM D412 10.0 N/mm2
ELONGATION AT BREAKASTM D412 200%, min.
COMPRESSION SETASTM D395 30% (max)
at 70°C for 22 hours
Technical Profile based on NR/SBR Rubber products
*Whilst every care has been taken to ensure that the information included in this document was accurate at the time of printing, Flowcrete reserve the right to change product specifications at any time without prior notice. The photographs and colours reproduced in this publication are within the constraints of the printing process and are not to be used for matching purposes. All photographs are used for approximate representation only and may not show the actual products on offer. E&OE.
www.flowcrete.ae
Flowcrete Group
Flowcrete Group Ltd is the world’s leading specialist
in seamless resin flooring, screeds and other coating
technologies, with operations across five continents.
Flowcrete Europe
Baltic States +37 1 2864 4666 [email protected]
Bulgaria +359 898 61 58 31 [email protected]
Denmark +46 435 40 01 10 [email protected]
France +33 1 60 61 74 42 [email protected]
Germany +49 6119 016645 [email protected]
Italy +39 339 4853258 [email protected]
Norway +47 64 86 08 30 [email protected]
Poland +48 22 879 89 07 [email protected]
Romania +40 37 400 80 78 [email protected]
Russia +7 495 645 83 18 [email protected]
Spain +34 937 07 0872 [email protected]
Sweden +46 435 40 01 10 [email protected]
Turkey +90 532 416 66 52 [email protected]
UK +44 1270 753 000 [email protected]
Flowcrete International
Australia +61 7 3205 7115 [email protected]
Bangladesh +880 1755563376 [email protected]
China +86 10 8472 1912 [email protected]
Hong Kong +852 2795 0478 [email protected]
India +91 44 4202 9831 [email protected]
Indonesia +62 21 252 3201 [email protected]
Malaysia +60 3 6277 9575 [email protected]
Philippines +63 917 514 2696 [email protected]
Singapore +65 6848 7166 [email protected]
South Africa +27 31 461 3411 [email protected]
Thailand +66 2539 3424 [email protected]
UAE +971 4 886 4728 [email protected]
Vietnam +84 8 3821 6561 [email protected]
Flowcrete Americas
Brazil +55 11 3230 1107 [email protected]
Canada +1 800 218 1850 [email protected]
Chile +56 2 2938 1962 [email protected]
Colombia +57 1 381 9254 [email protected]
Mexico +01 800 099 0468 [email protected]
USA +1 936 539 6700 [email protected]