decorative coin purses

Copyright © 2014 Threads n Scissors

All rights reserved. Unauthorized reproduction, in any manner, is prohibited.

Http://www.threadsnscissors.com

You will need to stitch the following:

1 x design back

1 x design front

1 x design flap

Method

For the back piece. (load back design to your machine)

Hoop 1 later of cutaway stabilizer. Stitch the first color. Place a piece of batting

and fabric over the stitched area. Use temporary adhesive spray to hold in

place. Stitch the second color. This tacks the fabric and batting in place. Stitch

the next color. This is the decorative quilting stitch.

Materials

Cotton Fabric (plain and printed)

Temporary Adhesive

Spray

Thin Batting

Hook and Loop tape

Cutaway stabilizer

Decorative Coin Purses




Remove the hoop from the machine and turn over so the backside faces up. Place a piece of fabric over the stitched area. Use temporary adhesive spray to hold in place. Stitch the next color. Remove the hoop from the machine and trim away excess fabric and batting from both sides of the hoop. Stitch the last color.

The Front piece. (load front design to your machine)

Hoop 1 later of cutaway stabilizer. Stitch the first color. Place a piece of batting and fabric over the stitched

area. Use temporary adhesive spray to hold in place. Stitch the second color. This tacks the fabric and bat-

ting in place. Stitch the next color. This is the decorative quilting stitch. Stitch the next color. This is the

hook and loop placement line.




Cut a piece of hook and loop tape. Split the two halves. Keep the one half for the flap. Place the other half over the placement line. Use temporary adhesive spray to hold in place. Stitch the next color. Trim away the

excess hook and loop tape.

Remove the hoop from the machine and turn over so the backside faces up. Place a piece of fabric over the stitched area. Use temporary adhesive spray to hold in place. Stitch the next color. Remove the hoop from the machine and trim away excess fabric and batting from both sides of the hoop. Stitch the last color.




Now for the Flap (load flap design to your machine)

Hoop 1 later of cutaway stabilizer. Stitch the first color. Place a piece of batting and fabric over the stitched area. Use temporary adhesive spray to hold in place. Stitch the second color. This tacks the fabric and bat-

ting in place. Stitch the next color. This is the decorative quilting stitch.

Remove the hoop from the machine and turn over so the backside faces up. Place a piece of fabric over the stitched area. Use temporary adhesive spray to hold in place. Stitch the next color. Remove the hoop from

the machine and trim away excess fabric and batting from both sides of the hoop.

Stitch the next color. This is the hook and loop placement line. Remove the hoop from the machine and turn it over. Place the other half of the hook and loop tape over the placement line on the backside of the design. Use temporary adhesive spray to hold in place. Stitch the next color. Trim away the excess hook and

loop tape.




Stitch the last color.

Cut all the pieces out of the stabilizer.

Using a zig zag stitch on your sewing machine with matching upper and bobbin thread, sew the pieces to-gether as shown in the photos. Fist stitch the flap to the back piece. Then stitch the front piece to the back

piece matching the bottom of the pieces. The front piece is shorter than the back piece.

decorative coin purses

Documents