DEEPAK.SDoor No: 1253-7 Sri Lagumma Devi Nilayalam,Bathapalli (vill) Kumathapalli (po), Hosur (TK), Bangalore, road (NH 7), Krishnagiri, (Dt), Tamil Nadu, India.Mobile No: +91 7418326998.E-Mail ID : naamengineer @g m a i l . c om

CAREER OBJECTIVE

“To enhance my professional skills in a dynamic and stable workplace”

ACADEMIC PROFILE QUALIFICATION Board/

UniversityName of

Institution /

Class/ Year of Passing

CGPA / Percentage

M.E – CAD/CAMMechanical Engineering

AnnaUniversity Chennai.

Mepco Schlenk Engineering College

Sivakasi.

2016 7.33

BE - AERONAUTICAL ENGINEERING

AnnaUniversity of TechnologyChennai.

ER.Perumal Manimekalai College Of Engineering

Hosur.

2013 7.16

CLASS 12State Board

R.V.Govt.Boys Higher Secondary School Hosur. 2009 80%

CLASS 10 State BoardR.V.Govt. Boys Higher Secondary School Hosur.

2007 45.2 %

Master of Engineering Final Year Project

Thesis Title Description Flame Retardant Technique Applied in Natural composite materials. (Polymer matrix)This project was sanctioned by All India Council Technical Education.

Guided by: Dr.Rajkumar, professor, Department of Mechanical Engineering, Mepco schlenk engineering college, sivakasi – 626005, Tamil Nadu.

The objective of this project was to determine fire resistance of natural composite material’s reinforcement are (Coir, Cotton, Sisal and Palmyra leaf stream) these fibres were extracted using the mechanical decortication, chemical and rutting process as discussed. The hierarchical cell structure of the fibres was analysed using Scanning electron microscope and Fourier transforms infrared. These fibres have been reinforced with synthetic rubber polymer matrix to prepare the composites using hand lay-up manufacturing process. The chemical compositions of specimens treated with inorganic flame retardant chemicals (Aluminum hydroxide, Magnesium hydroxide, Zinc borate, Zinc oxide and Zirconium oxide) was prepared and its structure characterized by scanning electron microscope(SEM), Fourier transform infrared (FT-IR), Percentage of moisture content in natural fibers and Horizontal Flame Test and Vertical Flame Test. Then the fire mechanism and the ways to counter it is discussed.

Bachelor of Engineering Final Year Project

Project Title DescriptionExperimental Analysis Of Alternative FuelsUsed in Aviation Industries.

Guided by: Mr.R.Karthikeyan, Senior Assistant Professor, Aeronautical Engineering, Er.Perumal Manimekalai College of Engg, Hosur- 635109.

This project reviewed Jetropa oil, castro oil, and Plum oil renewable fuel options for aircraft engines. The renewable fuels considered were: biodiesel, methanol, ethanol and bio-methane. Energy may designate alternative fuels offers substantial environmental benefits.

WORK EXPERIENCE

Ostrich Mobility Instruments Pvt. Ltd (Bangalore) Department: Research & Development. Designation: Mechanical Engineer R&D.

R&D WORK EXPERIENCE: 12 MONTH. R&D DESIGN & TESTING EXPERIENCE: 9 MONTH.IT EXPERIENCE: 3 MONTH.

02.09.2013 – 30.05.2014: Ostrich Mobility Instruments Pvt. Ltd. Bommasandra, Bangalore.

About the company,

Ostrich Mobility Instruments.

Ostrich Mobility Instruments is a private limited company dedicated to design affordable Personal Mobility Equipment (PME) & Hospital ICU Beds in India. Company entered the field of powered wheelchairs back in 2003.  In 2004 company launched two models of indoor electric wheelchairs with joystick and touch-pad for people with severe disability. Company entered in to outdoor mobility equipment in 2007 and introduced the first ever ALL TERRAIN ELECTRIC WHEELCHAIR, Pristine FLEX, Galaxy AWA with SPLIT FRAME TECHNOLOGY (patent applied). Over the last 80 years history of powered wheelchairs, no other invention has been revolutionary as the split frame technology invented by ostrich mobility. Ostrich is a company which made its own footsteps, multi actuator control circuit for making electric wheelchairs & hospital beds in India and has two patents for wheelchairs according to Indian terrains. Under the global brand Ostrich, company now offers seven different models where the unique ideas and engineering solutions are combined in what is the most cost effective high quality powered wheelchair in global market. 

DESIGNATION: Mechanical Engineer R&D.

Function of work in R&D: Design & Testing.

Function of work in Industrial Development: ISO (Our product contains mainly 24 testing in ISO & CE marking).

Responsibilities:

Design & Fabrication of minor Testing equipment’s. R&D Design & Testing report maintenance. Product quality development. Testing all the product of our company. Learn & develop our product standard. To make user manual for hospital beds. Production Planning & Control.

i. “Production Request” Log book Maintenance. ii. “Work Allotment” Log book Maintenance. iii. “Inspection Report” Log book Maintenance.iv. Pre Dispatch Inspection (PDI) Check.

PROJECTS COMPLETED:

1. Toggle Switch Testing: I was involved in the instrument design and fabrication of the Toggle switch endurance test (product life time calculation) which is used in the hospital beds. We deal with the testing of the Blood donation beds which is employed with highly advanced actuator control.

2. Remote Switch Testing: I was involved in the instrument design and fabrication of the Remote (multi) switch endurance test (product life time calculation) which is used in the hospital beds & electric wheelchairs. We deal with the testing of the ICU beds which is employed with highly advanced multi actuator control.

3. Actuator Endurance Testing: I was involved in the instrument design and fabrication of the Actuator endurance test (product life time calculation) which is used in the hospital beds & electric wheelchairs. We deal with the testing of the ICU beds which is employed with highly advanced multi actuator control.

4. ISO Testing:

These standards are currently organized into 24 interrelated documents that are harmonized world-wide under the auspices of the international Standards Organization (ISO). They cover both manual and powered wheelchairs, including scooters. All ISO standards are reviewed every five years and revisions made as deemed necessary.

Part 01: Determination of Static Stability *

Tipping angle* in degrees on a slope while facing.

Part 02: Determination of Dynamic Stability (Powered Chairs)*

Rearward and forward stability-traveling forwards and backwards.

Forward stability- travelling from sloped to level surface. Lateral stability-turning on a downhill slope.

Part 03: Determination of Effectiveness of Brakes* Parking Brake, Running Brake and Parking Brake fatigue.

02.06.2013 to 30.08.2013Past: Bitwise Global IT Service & Solution (Bangalore)

Bitwise Global IT Service & Solution (Bangalore) Department: Research & Development Designation: Research Analyst (Researcher)

WORK RESPONSIBILITY→Developing “Electric, Electronic & Mechanical “based projects (Public & Industrial use).→Maintaining our company “R & D” Website.→Guiding web & software Developers: web visualizing design & logo creating (search engine optimizer).→R&D Data security management.→Project Hardware Selection & Design→EMBEDDED SYSTEM (PIC, 8051 & ARDUINO) CONTROLLERS

01.04.2013 to 31.05.2013Past: Bangalore Transformer PVT Ltd. (Bangalore) Manufacturing of High Voltage current & voltage Transformer and condenser Bushing. Transformer Bushing Design in AUTO CAD.

Transformer Bush 5KAms. Transformer Bush 8KAms. Transformer Bush 10KAms. Transformer Bush 16KAms.

Excellence in Manufacturing Process

Fire Works Chemicals (Potassium Nitrate, Barium Nitrate & Sodium Nitrate).

Fireworks paper tubes.

Metal powder (Aluminum & magnesium fine powder for fireworks materials).

Nano paints.

Packaging material (Paper board “3, 5, 7 layer manual & automatic process”).

Polymer composite materials (Natural & synthetic fibers).

printing (Graphic Design, Computer-to-plate, three color & Offset printing).

Waste water purification.

Wax safety matches.

AREA OF INTEREST

Aircraft Performance. Applied Materials Engineering. CNC Machine Tools. Composite Materials, Mechanics & Structures. Design For Manufacturing, Assembly and Environments. Gas Turbine Engines. Industrial Robotics and Expert Systems. Maintenance Engineering and Management. Mechatronics in Manufacturing Systems. Metrology and Non Destructive Testing. New Product Development . Rapid Prototyping. Strength of Materials &Aircraft Structures.

COMPUTER SKILLS

Advance Diploma in Computer Application (ADCA) in Tamil Nadu SoftwareCollege “Duration:1 year”

Basic idea WEB Designing, Embedded program using Software:“KeiluVision3” and Arduino software.

ACADEMIC PROJECTS EXPO

“Thermo-Electric Heating and Cooling Hydrophobic Suit for Soldiers”AIM: In this project we designed an E-Uniform which gives better protection to the soldiers who are working in extreme weather conditions. This Uniform will make the soldier to work in any kind of environment.

“AGRI-ELECTRONICS”AIM: To reduce HUMAN WORK LOAD & Develop Agriculture field.

“GSM BASED DEFENCE LOCOMOTIVE NAVIGATION”AIM: To Identify Bombs.

“AUTOMATIC CONTROL AGRICULTURE TRUCK”AIM: To Increase agriculture production.

“MAGNETIC GENERATOR”AIM: To produce ELECTRIC ENERGY.

“DIGITAL ELECTRIC CONTROL AND MONITERING SYSTEM”AIM: To change “ELECTRICAL BILLING” system & Reduce human work

Load. “AUTOMATIC VEHICLE ACCIDENT AND ALERT SYSTEM”

AIM: To secure human life.

ACHIEVEMENTS

Published Research Paper in “INDIAN JOURNAL OF APPLIED RESEARCH”. (2013)

Secured 3rd p r i z e in presented Technical Project in Institutional level. (2013)♦Project Name: “DIGITAL ELECTRIC CONTROL AND MONITERING SYSTEM”.

Secured 1st p r i z e in presented Technical Project in Department level. (2013)♦Project Name: “AUTOMATIC VEHICLE ACCIDENT AND ALERT SYSTEM”.

Secured 1st prize in presented Technical Project in Institutional level. (2012)♦Project Name: “AGRI-ELECTRONICS”.

Secured 1st prize for project in National Level Symposium. (2012)♦ Project Name: “AGRI-ELECTRONICS”.

Secured 2nd Prize for the Project in National level technical fest. (2012)

♦ Project Name: “GSM BASED DEFENCE LOCOMOTIVE NAVIGATION” Participating in Project Presentation in State Level Project Competition. (2012) Got 100% attendance in 1s t& 2nd year. (2009 to 2011) Secured 3rd place in +2 in my Class level.(2009) Participating sports competitions at my school & College level.

DESIGN SKILLS

AUTO CAD (Excellent).1. I done Outsource Design Project Success (Bangalore Transformer).

CATIA Course Completed (Edu CADD Training Center). 2. Certificate No: TNCA/1024

Design knowledge in SOLID WORKS and PRO-E. Basic knowledge in Ansys.

CO-CURRICULAR ACTIVITIES

Presented a paper “Flame Retardant Technique Applied in Natural Composite Materials” Second International Conference on Fascinating Advancement in Mechanical Engineering (FAME 2016), which is held at Mepco Schlenk Engg College – Sivakasi.

presented a paper on the topic “DESIGN & DEVELOPMENT OF AIRCRAFT PISTON ENGINE” in National Level Technical Symposium conducted by “ER.PERUMAL MANIMEKALAI ENGINNERING COLLEGE” in the year2012.

Presented a paper on the topic “MULTI NOZZLE” in a Seminar dayConducted by “Department” in the year 2012.

Participated and Exhibited a Technical Project entitled “AGRI-

ELECTRONICS” in Technical Exhibition held in “PMC TECH” in the year2012.

A member of “MATHS CLUB” and “BUSINESS CLUB” conducted by “PMC TECH” in the year 2012.

Presented a Project in National Level Technical Symposium(TECH TRACK)

held at Adhiyamaan College Of Engineering about “GSM BASED DEFENCE

LOCOMOTIVE NAVIGATION” in the year 2012. Presented a Project in National Level Technical Symposium(SHASTRA’12) held at

Adhiyamaan College Of Engineering about “AGRI-ELECTRONICS” ,”CAD MODELLING”& BLOW TO WIN COMPETITION”.

Presented a Project in State Level Project Competition (WISE’12) held at CSI

College Of Engineering-KETTI about “AUTOMATIC CONTROL AGRICULTURE TRUCK” .

Participated the “WILDLIFE PHOTOGRAPHI” WORKSHOP during (KURUKSHETRA) 2011 held at CGE COLLEGE, ANNA UNIVERSITY, CHENNAI.

Participated in the Introductory Course on CFD conducted by NEW HORIZON COLLEGE OF ENGINEERING & Co-Organized by NAFEMS &JET WINGS.

EXTRA CURRICULAR ACTIVITIES

IE (I) Students Chapter (MECH-PG) Cad/Cam, Indus.Safe & NST, Co-ordinator in the year 2015 – 2016. IE (I) Students Chapter (MECH-PG) Cad/Cam, Indus.Safe & NST, Executive in the year 2014 - 2015 Presented a paper “MANUFACTURING PROCESS - Technical Talk - Discussed about manufacturing process of paper industry, printing industry, board industry, chemical, explosive metal powder industry and match work industry” in IE(I) student Chapter 2016. Conducted event IE (I) student chapter “Statements and Arguments - Literary Event - General discussion on economy, environment and societal impacts in India” 2015. Conducted event IE (I) student chapter “Decision Making - Literary Event - Situations are described and the students are asked take suitable decisions in a company” 2015. Video presented in IE (I) student chapter “Memories of Abdul Kalam - Brainstorming Session - Life journey and his research experience was presented” 2015. History of Aeronautics - Video Presentation - Discussed the advancements in the aeronautic industries and its achievements. (2015) Materials and Their Properties - Technical Talk - Importance of various properties of material was discussed emphasizing the reason for Titanic ship disaster. (2015)

Conducted Picture Discussion - Literary Event - Analysis of a given picture- what is

likely to come out of the situation. (2015) Design & manufacturing of Testing Instruments - Technical Talk - ITER the new energy production and design of toggle switch, keypad button life cycle testing instruments were discussed in IE(I) student chapter in the year 2015. NSS State - Programme - Joy of Giving- Deaf & Dumb Children’s and MR Home Children’s, Satchiapuram, sivakasi in the year 2015. Participated in the “National Cadet Corps”. Have done many social services like croud controlling, traffic controlling,

etc… through NCC.

SOFT SKILLS

Having Good attitude. staying on the job until its finish. Adoptive. Team building ability.

PERSONAL DETAILS

Father’s Name : Mr.K.SAMPATHKUMARDate of Birth : 22-10-1991Gender : MaleNationality : IndianLinguistic Proficiency : English, Tamil, Kannada and Telugu.Hobbies : playing chess, gardening, etc…

DECLARATION

I, Deepak.S, he r eby dec l a r e t ha t the above fu rn i s hed in fo rmat ion i s

Authen t i c t o t he be s t o f my knowledge and be l i e f .

P l ace : Y ours t ru ly , Da te : (DEEP AK)