department ms mechanics of solids, surfaces and systems · - dynamics & control ... example of...

DEPARTMENT MS3

MECHANICS OF SOLIDS, SURFACES AND SYSTEMS

MASTER TRACK AND SPECIALISATIONINFORMATION DAY MARCH THE 9TH 2016

WWW.UTWENTE.NL/CTW/MS3

11-3-2016 2

MS3 – Master information 201613.45 - 14.45:

• Prof. Schipper: Introduction department MS3.• Prof. De Boer: Coördinator Education (MS3).• Students: Internship and Master assignment.

• Yoeri Ton• Andries van Benthem

14.45 - 16.00: Visit Laboratories.

16.00 - ……..: Individual visit to labs and personal questions

11-3-2016 3

Chair versus Department

Faculty

Chair 1 Chair i Chair n = many

Carries out research and gives BSc and

MSc courses

11-3-2016 4

Chair versus Department

Faculty

Depatment1 Department i Department 5

Carries out research and gives BSc and

MSc courses

Chair 1 Chair i Chair 12

11-3-2016 5

Chairs involved in MS3

Elastomer Technology and Engineering (ETE) headed by Prof.dr. A. Blume.

Mechanical Automation and Mechatronics (MA) deputy head Dr.ir. R.G.K.M. Aarts.

Design of Mechanisms and Robotics (DMR) headed by Prof.dr.ir. J.L. Herder.

Applied Laser Technology (LT) deputy head Dr.ir. G.R.B.E. Römer.

Production Technology (PT) headed by Prof.dr.ir. R. Akkerman.

Engineering of Fibrous Smart Materials (EFSM) deputy head Prof.dr.ir. R. Akkerman.

Mechanics of Polymeric Materials headed by Prof.dr.ir. L.E. Govaert

Nonlinear Solid Mechanics (NSM) headed by Prof.dr.ir. A.H. van den Boogaard.

Structural Dynamics & Acoustics (SDA) headed by Prof.dr.ir. A. de Boer.

Dynamics Based Maintenance (DBM) headed by Prof.dr.ir. T. Tinga.

Surface Technology and Tribology (STT) headed by Prof.dr.ir. D.J. Schipper.

Skin Tribology (ST) headed by Prof.dr.ir. E. van der Heide.

Tribology Based Maintenance (TBM) headed by Prof.dr.ir. P.M. Lugt.

11-3-2016 6

Department MS3

At the department Mechanics of Solids, Surfaces & Systems

at first you choose for a broad spectrum of specialisations.

After about half a year (when you have more experience and

insight) you choose for one specialisation.

11-3-2016 7

MS3

Manufacturing the Future: MS3 develops the technology for future manufacturing processes and new products

by a science based engineering approach focused on material- and system behaviour and robust optimization.

Research within MS3 addresses the scientific and engineering aspects of the strongly related “triangle” of (i) material (behaviour), (ii) production and (iii)

products, where ultimately the performance of all aspects is of crucial importance.

Our students are trained to solve industry’s problems of today and tomorrow and our research is directed to develop the technology needed to be successful in the

long run.

11-3-2016 8

MS3

11-3-2016 9

Department MS3 – Education and research

Education: Prof. De Boer

Research: Impression via lab visit

11-3-2016 10

Choice seems difficult, but it is not!

JobSecondary school

N&G, N&T Study

Diplome: MechanicalIngenieur! (MSc)

MasterBachelor |

Choice whichspecialisation

11-3-2016 11

Department MS3

Organisation:Chair Prof.dr.ir. D.J. Schipper

Coordinator Research Dr.ir. G.R.B.E. Römer

Coordinator Education Prof.dr.ir. A. de Boer

Contact: Mrs. Bruinink, [email protected], 0534895630

Mrs. Ter Horst, [email protected], 0534893596

Mrs. Tjapkes, [email protected], 0534892502

Mrs. Zimmerman van Woesik, [email protected], 0534892460

11/03/2016 12

Prof.dr.ir. André de BoerCoordinator Education MS3

MECHANICS OF SOLIDS, SURFACES & SYSTEMS

MSc program Profile courses Department courses Elective courses Second Year MEWhy MS3

CONTENT

13

Master is two year

One year courses (60 ec)

Plus one year practical training & assignment (60 ec)

14

MASTER PROGRAM ME

Competence profiles (3 O’s):

Research & Development

Design & Construction

Organization & Management

15

MASTER PROGRAM ME

At the end of the master the student has to prove that he/she can expand the borders of the ME field.

This is only possible in a specific area in the field of ME = specialisation.

Therefore the student has to choose also a specialisation

16

MASTER PROGRAM ME

11/03/2016 17

Specialisations R&D D&C O&MResearche

r(R&D)

Designer(D&C)

Organisor(O&M)

Mechanics of Solids, Surfaces & Systems (MS3)Applied Mechanics (AM)Elastomere Technology (ETE)Mech. Automation (MA)Production Technology (PT)Surface Techn. & Tribology (STT)

Maintenance

Maintenance

Design, Production & Management (DPM)Design Engineering (DE)Production Management (PM)

Thermal and Fluids Engineering (T&FE)Engineering Fluid MechanicsMulti Scale MechanicsThermal Engineering

Biomechanical Engineering (BE)

Maintenance Engineering & Operations (MEO)

MASTER PROGRAM ME

Thesis

40 EC

Intern-ship

20 EC

Profile courses25 EC

Department courses20 EC

Elective courses15 EC

1st year 2nd year

MASTER PROGRAM MS3

R&D- Fluid Mechanics

- Transport Phenomena

- Linear Solid Mechanics

- System Identification & Parameter Estimation

- Solids and Surfaces

- Numerical Methods in Mechanical Engineering

Profile courses

Profile coursesD&C- Design of Biomedical Products

- Product Design

- Process Equipment Design

- Design, Production & Materials

- Design Principles of Precision Mechanisms

- Numerical Methods in Mechanical Engineering

Profile coursesO&M- Maintenance Engineering & Management

- Manufacturing facility design

- Design of production and inventory systems

- Engineering Project Management

Department courses (4 out of 5)

- Computational Structural Optimization

- Dynamics & Control

- Nonlinear Solid Mechanics

- Plastic and Elastomer Engineering

- Experimental Methods

- Applied Laser Technology

- Design of Mechanisms and Robotics

- Elastomer Technology and Engineering

- Mechanical Automation & Mechatronics

- Nonlinear Solid Mechanics

- Production Technology (Composites & Smart Fibres)

- Mechanics of Polymeric Materials

- Dynamics & Tribology Based Maintenance

- Structural Dynamics & Acoustics

- Surface Technology and Tribology & Skin Tribology

Research groups for Assignment

Elective courses (15 EC) (R&D, D&C)

• Elastomeric Technology• Composites• Rheology and Processing of Thermoplastics

• Motion and Vibration Control• Dynamics of Machines• Engineering Acoustics• Signal Processing for Acoustics & Vibrations

• Composites Forming• Moulding Technology • Laser Material Processing• Tribology• Surface Technology

• Failure mechanisms & life prediction• Structural Health & Condition monitoring

Obligatory courses (15 EC) O&M

• Failure mechanisms & life prediction• Structural Health & Condition monitoring• Reliability Engineering & Maintenance Management

Example of course list R&D

Part Course EC

Compulsory profilecourses

System identification and parameter estimation Linear Solid MechanicsSolids and surfacesFluid Dynamics

5555

Profile elective course Design principles for precision mechanisms 5

Compulsory department related courses

Computational structural optimization Dynamics & ControlExperimental Methods Plastic and Elastomer Engineering

5555

Elective subjects Laser Materials Processing Motion and Vibration ControlSurface Technology

555

Internship Internship 20MSc Assignment MSc Assignment 40

Example of course list D&C

Part Course EC


Design principles for precision mechanicsDesign, production and materialsNumerical methods in mechanical engineerProcess Equipment Design

5555

Profile elective course System identification and parameter estimation 5


Computational structural optimization Dynamics & ControlNonlinear Solid MechanicsPlastic and Elastomer Engineering

5555

Elective courses Elastomeric Technology Rheology and Processing of Thermoplastics Structural Health & Condition Monitoring

555


Example of course list D&C-MATERIALS

Part Course EC


Design principles for precision mechanicsDesign, production and materialsNumerical methods in mechanical engineerProcess Equipment Design

5555

Profile elective course Linear Solid Mechanics 5


Computational structural optimization Experimental Methods Nonlinear Solid MechanicsPlastic and Elastomer Engineering

5555

Elective courses Elastomeric Technology Rheology and Processing of Thermoplastics Composites

555


Second Year ME

• Internship• 3 months in a company abroad or in The Netherlands

• Assignment• Internal within one of the MS3 research groups• External within a company or research institute with which

MS3 groups collaborate

30

What area?

AutomotiveAerospaceOff shore industry………..ControlMaterials (composites, metals)BiomechanicsFluid-StructureThermo-Acoustics

31

Supervision

Internal. By PhD student and MS3 staff member

External. By company, MS3 staff member and sometimes PhD Student

Every 6 to 8 weeks progress meetings

32

Mechanics of Solids, Surfaces & Systems

‘Van alle markten thuis’• Experimental research• Building of experimental set-ups• Design• Numerical analyses• Program development• Mathematical modelling

• It is strived for a mix

33

New MS3 master student• Will be invited for a personal talk about planning etc.

• With the master program (4th year) it is possible to postpone the decision for a research group

• There are many possibilities for the Master Assignment

• Progress is tracked and discussed periodically

• Possibilities for Master Assignments between different chairs (within the competence profiles)

34

Why choose MS3

•Mechanics of Solids, Surfaces & Systems is essential base of Mechanical Engineering

•Learning now fundamentals of Mechanical Engineering is easier because experts are around to help

•Supervision/coaching by MS3 staff is excellent. ‘Open door strategy’

3/11/2016

3/11/2016 36

w w w . u t w e n t e . n l / c t w / M S 3

MECHANICS OF SOLIDS, SURFACES & SYSTEMS

Graduation assignment for MS3andries van Benthem

11/3/16Andries van Benthem 37

Possibilities within MS3

The assignment

Courses

Experiences


GRADUATION ASSIGNMENT FOR MS3CONTENTS

Internal

PhD

External

Company

Mix of both

Experiments

Software


POSSIBILITIES WITHIN MS3

About 8,000 employees in Veldhoven, more than 14,000 worldwide

Producer of lithography scanners

System of interest:

Diameter 300 mm

Resolution <38 nm

Overlay <2.5 nm

Troughput 275 wph


THE ASSIGNMENTINTRODUCTION TO ASML


THE ASSIGNMENTSUBJECT

Prediction of disturbances

Acoustic and dynamic

Reduction of model

FEM and acoustic theory

Sensitivity to changes

Damping of disturbances

Experimental validation


THE ASSIGNMENTSUBJECTS OF INTEREST

In first instance detailed CAD model as basis

Difficulties with meshing

Large domain

Small details

Now simple basis

Further details in process

Opportunity to analyze influence details


THE ASSIGNMENTFINITE ELEMENT MODELING


THE ASSIGNMENTMODEL INPUT

Acceleration measure stage

Frequency sweep

Pressure expose stage

Total of 12 positions

Impedance surfaces

Pressure to particle velocity ratio

Description of volume behind the surfaces

Reduction up to 85% of the calculation time


THE ASSIGNMENTMODEL REDUCTION

Transfer from the acceleration of the measure stage to the pressure at the microphones on the expose stage


THE ASSIGNMENTRESULTS MODEL REDUCTION

Cleanroom

Little space

Low frequencies => Large wavelengths


THE ASSIGNMENTSOLUTIONS TO REDUCE THE NOISE

Measurement plan

Planning for testing facilities ASML

Preparation

Production of absorbing surfaces

Data analysis

Expected results


THE ASSIGNMENTTESTING

Acoustic theory

Engineering Acoustics

Dynamic theory

Dynamics and Control

FEM modeling

Numerical Methods in Mechanical Engineering

Test preparation

Experimental Methods


COURSES

General

Opportunity to focus on a subject

Combination of knowledge from multiple courses

University

Easy access to knowledge

Easy access to software

ASML

Real working environment

Importance of practical interpretation


EXPERIENCES

Yoeri TonInternship at Audi

51

Audi Neckarsulm

52

Assignment Intern in the department for ‘technology development’ of the carbon fiber

reinforced plastics production process

FEM simulations (AniForm)

53

Extra activities at Audi: Composites Europe

54

Extra activities at Audi: Le Mans

55

Extra activities at Audi: Suppliers

56

Living in Germany

Wonen

Fietsen

57

After work and weekends Audi Praktikanten Stammtisch

Oktoberfest

BBQ’s and ‘Bierfest’

Tesla test drive

58

Sinsheim Techniek Museum

59

IAA Frankfurt International Motor Show

60

Finding an internship

Fellow students

Professor

If interested in an internship at Audi:

http://www.audi.com/corporate/en/careers/joining-audi/students/internship.html

61

Thank you!

62

department ms mechanics of solids, surfaces and systems · - dynamics & control ... example of...

Documents