designed by steve goodstevedgood.com/chessset.pdf · 2007. 12. 5. · cut 8 boards 2 inches wide...
TRANSCRIPT
-
www.scrollsawworkshop.blogspot.com
Digital PatternsDesigned bySteve Good
Home of Scroll Saw Pattern Printer
Copyright Steve Good [email protected]
-
Scr
oll
Sa
w C
he
ss S
et
with
Bo
ard
-
White Pieces
The bases are 1/4” thick and the pieces are½”thick
-
White Pieces
-
Black Pieces
-
Black Pieces
-
Cut 8 boards 2 inches wide and 17 inches long. Four dark and 4 lightcolored woods. The extra 1 inch of length is to compensate for the kerf of the blade when you cut the boards in strips later.
Chess Board Instructions.
-
Glue the boards up alternating dark and light.Glue and clamp until the glue dries.
-
Rotate the board and recut.
Cut 2 inch wide strips from the lamination. You willhave a small waste strip which you can discard.
-
Flip every other board top to bottom.
-
Glue the strips and clamp. Let this glue up dry several hours.
-
Trim the board with 2 inch wide strips.
Page 1Page 2Page 3Page 4Page 5Page 6Page 7Page 8Page 9Page 10Page 11Page 12