development platform iw-rainbow-g24d arria 10 soc/fpga … · 2020-07-13 · 8f-b, kannai sumiyoshi...
TRANSCRIPT
Development Platform iW-RainboW-G24D
Arria 10 SoC/FPGA Development Kit
www.iwavesystems.com
iW-RainboW-G24D
HIGHLIGHTS
SPECIFICATIONS
iWave’s Arria 10 SoC/FPGA Development kit comprises of Arria 10 SoC/FPGA SOM and custom carrier card. The SOM is equipped with 32-bit DDR4 memory support for HPS with optional ECC and 64-bit DDR4 support for FPGA. The Arria10 development kit carrier board supports required set of features like FMC (HPC) connector & PCIex4 connectors to validate Arria 10 SoC/FPGA high speed transceivers and other On-Board connectors to validate Arria10 SoC HPS interfaces.
APPLICATIONS: Test and measurement equipment, Control and
intelligence equipment, Diagnostic medical imaging equipment, Wireless infrastructure equipment, Compute and storage equipment, Broadcast and distribution equipment.
Arria 10 SoC & FPGA device compatibility
SX270, SX320, SX480, SX570, SX660
GX270, GX320, GX480, GX570, GX660
32 - Bit DDR4 support with ECC for HPS
64 - Bit DDR4 support for FPGA
MicroSD Connector for HPS booting
FMC (HPC) Connector x 1
PCIex4 Connector x 4nos
USB3.0 Type C Connector
Gigabit Ethernet through RJ45 Magjack
USB2.0 OTG through MicroAB connector
Industrial Grade operation
Arria 10 SoC/FPGA SOM:
Arria10 SoC/FPGA
1GB DDR4 SDRAM (32bit) with ECC for HPS/FPGA (Expandable)
MicroSD Connector for HPS booting
Configuration Flash for FPGA (Optional)
DDR4 RAM (64bit) from FPGA (Optional)
Arria 10 SoC/FPGA Carrier Board:
Serial Interface Features:
Debug UART through USB MicroAB Connector (for HPS)
Communication Features:
Gigabit Ethernet through RJ45MagJack (for HPS)
USB2.0 OTG through MicroAB Connector (for HPS)
FPGA USB3.0 through USB TypeC Connector
High Speed Expansion Connectors:
FMC High Pin Count (HPC) Connector:
FPGA High Speed Transceivers x 10
Upto 43 LVDS IOs
Four General Purpose Clock Input LVDS Pair/Single Ended
Five General Purpose Clock Output LVDS Pairs/Single Ended
PCIex4 Connector x 4nos:
FPGA High Speed Transceivers x 8 (2 transceivers per connector)
Upto 60 Single Ended IOs (15 IOs per connector)
Two General Purpose Clock Input LVDS Pairs/Single Ended
Two General Purpose Clock Output LVDS Pairs/Single Ended
Additional Features:
Power ON/OFF Switch
Reset Switch
20Pin HPS IO Header
JTAG Connector (Optional)
Power Supply:
Form Factor: 180mm X 120mm
12V Power Input Jack
Note1: In Arria10 SoC/FPGA SOM, these interfaces can be supported only if Arria10 SoC family devices which supports Hard Processor System (HPS) are used.Note2: In Arria10 SoC/FPGA SOM, if Arria10 SoC family device is not used and FPGA family device is used, then also 32bit DDR4 can be supported from FPGA fabric.Note3: In Arria10 SoC/FPGA SOM, these interfaces can be supported only if Arria10 SoC family devices are used because these interfacesare supported through Dedicated I/O pins of Hard Processor System (HPS).Note4: PCIex4 connectors are only the physical connector. The pinout is not as per PCIex4 standard.Note5: FPGA design for USB3.0 is not included by default.
1,2
1,3
4
5
NAND Flash for HPS booting(Optional)1,3
OS SUPPORT
Linux 4.1.22
Arria 10 SoC FPGA Development Board - BLOCK DIAGRAM
OPTIONAL KITS/ModulesDELIVERABLES
Arria 10 SoC Development Kit Arria 10 SoC SOMBoard Support PackageUser Manual
CUSTOM DEVELOPMENT
BSP Development/OS PortingCustom SOM/Carrier Development Custom Application/GUI Development Design Review and Support
Ordering the Arria 10 Development Kit The Development Kit can be ordered online from the iWave Websitehttp://www.iwavesystems.com/webforms
iWave Systems Tech. Pvt. Ltd.,th nd7/B, 29 Main, BTM Layout 2 Stage,
Bangalore-560076, India. Ph:+91-80-26683700, 26786245Email: [email protected]
iWave Japan, Inc.8F-B, Kannai Sumiyoshi Building,3-29, Sumiyoshi-cho, Naka-ku, Yokohama, Kanagawa, Japan.Ph: +81-45-227-7626Email: [email protected]
iW-G
24D
-BR
-R1.0
Note: iWave reserves the right to change these specifications without notice as part of iWave’scontinuous effort to meet the best in breed specification. The registered trademarks are proprietaryof their respective owners.
*Optional items not included in the standard deliverables.
ple SOMs based on ARMNXP, Renesas, Qualcomm, Altera, Intel and TI Processors.
iWave System has won the confidence of its c
iWave EuropePostbus 61973130 DD VlaardingenThe NetherlandsPh: +31 10 28403383Email: [email protected]
UART0 Debug Port
USB1 OTG
Gigabit Ethernet (EMAC1)
Bank1F (CH0) Transceiver
Bank1C (CH0 & CH1) Transceivers
Bank1C (CH2 & CH3) Transceivers
Bank1C (CH4 & CH5) Transceivers
Bank1D (CH0 & CH1) Transceivers
Power to Peripherals
UART1, SPI, I2C & GPIOs
15 FPGA IOs & 1 CLKOUT
15 FPGA IOs & 1 CLKIN
15 FPGA IOs & 1 CLKIN
15 FPGA IOs & 1 CLKOUT
5V
Bank1E (CH0 to CH5) Transceivers
Bank1F (CH1 to CH4) Transceivers
12V
JTAG
Note: PCIex4 connectors are only the physical connector. The pinout is not as per PCIex4 standard.
4 FPGA CLKIN & 5 CLKOUT pairs
To Transceiver Banks
12V, 3.3V, 1.8V
43 FPGA LVDS IO Pairs
Arria10 SX/GX SOM
iSO
ME
xpa
so
nC
on
en
ctor1
n
SOM
Exp
an
sioC
on
en
ctor2
n
Reference Clock
Generator(Op�onal)
PCIex4 Connector1(JESD204B)
FMC Connector
(HPC)
PCIex4 Connector2(JESD204B)
PCIex4 Connector3
(JESD204B)
(JESD204B)
PCIex4 Connector4
UART to USB converter
Power
Regulators
Power Regulators
Power Jack
(12V)
USB MicroAB Connector
USB MicroAB Connector
RJ45 Magjack
USB TypeC Connector
HPS Header
JTAG Connector (Op�onal)