die view and pad locations for 5 hp hbts, 5hp resistors, 7 hp hbts, 8 hp hbts and bgrs
DESCRIPTION
Georgia Tech- UCSC 9/05 Neutron Experiment A. P. Gnana Prakash, John D. Cressler School of Electrical and Computer Engineering, Georgia Tech Alex Grillo, UCSC. Die View and Pad locations for 5 HP HBTs, 5HP resistors, 7 HP HBTs, 8 HP HBTs and BGRs. 5 HP HBT. Location of HBTs. 5 HP HBT. - PowerPoint PPT PresentationTRANSCRIPT
Die View and Pad locations for 5 HP HBTs, 5HP resistors, 7 HP HBTs, 8 HP HBTs and BGRs
Georgia Tech- UCSC 9/05 Neutron Experiment
A. P. Gnana Prakash, John D. CresslerSchool of Electrical and Computer Engineering, Georgia Tech
Alex Grillo, UCSC
Location of HBTs5 HP HBT
Desired pad array (4th from left/right)
5 HP HBTColumn Name: JNPN_LIBCE (4th column from the right/left)Devices: 0.5x1 and 0.5x2.5 um2 (pad lay out is given)Note: These devices all share common emitters (at pad 1,15,24) and also share a common substrate at pad 25
5 HP P-poly resistor
Desired Location
Remember this figure!
Desired Pad Array
5 HP P-poly resistor
IBM 7 HP HBTLocation of BHTs
Desired pads
IBM 7 HP HBTColumn : 3rd column from the rightDevices: 0.2x2.5 and 0.2x5 um2
Note: 1)For device 0.2x2.5, pads: 4, 5, 6 (C, B, E) (Count pads from top side)2)For device 0.2x5, pads: 7, 8, 9 (C, B, E)
IBM 8 HP HBTDesired Location
Count from this pad array
Desired Pad Array (Fifth from right)
IBM 8 HP HBTs
Count from this pad array
Column Name: NpHp_D25_3 (5th column from the right)Devices: 0.12x2 and 0.12x4 um2 (pad lay out is given)Note: We have 2 sets of same geometry devices
8 HP BGR
Location of BGRs
Desired Pad Array
8 HP BGR