dii f jile copy - dtic.mil · dii f jile copy bibliography on metrication ... the conversion to the...
TRANSCRIPT
DiI f JILE COPY
BIBLIOGRAPHY ON METRICATION
S.DTICELECTE JAN-UARY-1977
JUL 2 5 1990 toAUGUST-1989
Jointly supported by
II,
NASA S[P4JU RO(mv AVEAPPROVED FOR PUBLIC RELEASE:DISTRIBUTION IS UNLIMITED
SECURITY CLASSIFICATION OF THIS PAGEI Form Approved
REPORT DOCUMENTATION PAGE OMBNo. 0704-0188,__Exp Date: Jun 30, 1
la. REPORT SECURITY CLASSIFICATION lb. RESTRICTIVE MARKINGS
2a. SECURITY CLASSIFICATION AUTHORITY 3. DISTRIBUTION /AVAILABILITY OF REPORT
2b. DECLASSIFICATION / DOWNGRADING SCHEDULE
4. PERFORMING ORGANIZATION REPORT NUMBER(S) S. MONITORING ORGANIZATION REPORT NUMBER(S)
RSIC-BIB-4
6a. NAME OF PERFORMING ORGANIZATION 16b. OFFICE SYMBOL 7a. NAME OF MONITORING ORGANIZATIONU.S. Army MISSILE Coinand (If applicable)
Redstone Scientific Info. Cent IAMSMI-RD-cs-R6c. ADDRESS (CIty, State, and ZIP Code) 7b. ADDRESS (City, State, and ZIP Code)
Commander, U.S. Army Missile CommandRedstone Scientific Information CenterAMSMI-RD-CS-R Redstone Arsenal, AL 35898-5241
8a. NAME OF FUNDING/SPONSORING 18b. OFFICE SYMBOL 9. PROCUREMENT INSTRUMENT IDENTIFICATION NUMBERORGANIZATION j (If applicable)
U.S. Army Missile Command IAMSMI-RD-CS-R8c. ADDRESS (City, State, and ZIP Code) 10. SOURCE OF FUNDING NUMBERS
Comrander, U.S. Army Missile Command PROGRAM PROJECT ITASK IWORK UNITRedstone Scientific Information Center ELEMENT NO. NO. NO. ACCESSIONAMSMI-RD-CS-R Redstone Arsenal, AL 35898-5241
AI
11. TITLE (Include Security Classification)
Bibliography On Metrication January-1977 to AuQut- -198912. PERSONAL AUTHOR(S)
Smitar,, C. Ray and Powei, M. Beth13a. TYPE OF REPORT 1l3b. TIME COVERED 114. DATE OF REPORT (Year, Month, Day) jIS. PAGE COUNT
Final j FROMJa . 77 TO__AuL89I 1990 Au 8916. SUPPLEMENTARY NOTATION q
17 COSATI CODES 18. SUBJECT TERMS (Continue on reverse if necessary and identify by block number)
FIELD GROUP SUB-GROUP
20 BIBLIOGRAPHIES; METRIC SYSTEM; METRICATICN;INTERNATIONAL SYSTEM OF UNITS
19. ABSTRACT (Continue on reverse if necessary and identify by block number)J
This is a bibliography on metrication, the conversion to the International System of Unit(SI), compiled from citations dated from January, 1977 through July, 1989. Citationsinclude books, conference proceedings, newspapers, periodicals, government and civiliandocuments and reports. Subject indices for each type of citation and an author index forthe entire work are included. A variety of subject categories such as legislation,construction, avionics, consumers, engineering, education, management, standards,agriculture, marketing and many others are available.
20. DISTRIBUTION /AVAILABILITY OF ABSTRACT 21. ABSTRACT SECURITY CLASSIFICATIONW UNCLASSIFIED/UNLIMITED 03 SAME AS RPT. 0 DTIC USERS
22a. NAME OF RESPONSIBLE INDIVIDUAL 22b TELEPHONE (include Area Code) 22c OFFICE SYMBOL
Sybil H. Bullock (205) R7g-'1 hMT-pn o-)D FORM 1473, 84 MAR 83 APR edition may be used until exhausted. SECURITY CLASSIFICATION OF THIS PAGE
All other editions are obsolete.
PREFACE
As one of the foremost information sources in theDepartment of the Army, the Redstone Scientific InformationCenter (RSIC) continues its efforts to serve the needs of itsusers. This bibliography is intended to facilitate theconversion to the metric system by all Federal agencies, asrequired by Public Law 100-418 and Department of DefenseDirective 4120.18.
The selected coverage includes books, periodicals,conference proceedings, documents, reports, and newspapers.Coded citations indicate items in RSIC's collection.Interlibrary loan requests may be submitted.
The bibliography was compiled and edited by C. Ray Smithand M. Beth Powel. The following RSIC staff members providedinvaluable assistance: Martha Knott, Joyce Plaster, YvonneStewart, Rose Sidick, and Doris Cornett. Specialcontributions were made by John 0. Aberg of NASA and ErnstLange, compiler of the 1976 bibliography Information on theMetric System and Related Fields.
Periodic updates of this bibliography are planned.Further information may be obtained from Redstone ScientificInformation Center by writing:
CommanderU.S. Army Missile Command Accesion ForRedstone Scientific Information Center NTIS CRA&IAMSMI -RD-CS-R DTIC TAB 3Redstone Arsenal, AL 35898-5241 Unannounced ]
Justificationor by calling:
Interlibrary Loan or Open Literature Reference: By(205) 876-5195 or Autovon 746-5195 DistributlonI
Documents Reference: Availability Codes(205) 876-5181 or Autovon 746-5181 Av-,I a,,djro
Dist Special
Sybil H. Bullock r-(DirectorRedstone Scientific Information Center
q4
TABLE OF CONTENTS
Books 1 - 11
Conference Proceedings 12 - 28
Documents 29 - 44
Periodicals/Serials 45 - 64
Newspapers 65 - 74
Standards 75 - 81
Author Index 82 - 89
A subject index may be found at the end of each section.
BOOKS
1. ASME Steam Tables in SI (Metric) Units for Instructional Use:American Society of Mechanical Engineers, 345 East 47th Street,New York, NY 10017; 1977. l9p.STANDARDS-STEAM/ENGINEERING-MECHANICAL.
2. Basic Metric Style Manual for Secretaries. Irvine, CA: GlobalEngineering Documents; 1976. (Corbett, John); ISBN: 0-912702-0404.avail, at RSIC.SECRETARIAL/STYLE MANUAL.
3. Benedict, John T. Metrication for the Manager. Washington DC:American National Metric Council; Sep. 1977. 48p, illus.(Boselovic, Len); ISBN: 0-916148-12-2.Note: LC-77-84932;AEROSPACE N78-11257.T50.5 B463 1977; avail, at RSIC.MANAGEMENT/COST ANALYSIS/BUSINESS.
4. Brown, Sam E. Activities for Teaching Metrics in Kindergarten.Landham, MD: University Press of America; 1978;ISBN: 0-8191-0462-0.EDUCATION-PRESCHOOL.
5. Cetron, M.J.; Roepcke, L.A.; McFadden, C.F.; Sugarek, S.E.;Peters, E.B., Forecasting International Ltd., Arlington, VA. U.S.Army Metrication: Analysis and Recommendations for DAImplementation Plan. Vol. 1; 9 Jun, 1978. 345p.Note: NTIS AD-AO69 746/6; AEROSPACE N80-11256; see also vol. 2,AD-A066 984.ECONOMIC IMPACT/ARMY/MANAGEMENT.
6. Cetron. M.J.; Roepcke, L.A.; McFadden, C.F.; Sugarek, S.E.;Peters, E.B., Forecasting International Ltd., Arlington, VA. U.S.Army Metrication: Analysis and Recommendations for DAImplementation Plan. Vol. 2: Annexes; 1978. 156p.Note: NTIS AD-A066 984/6; AEROSPACE N79-25252; see also vol. 1,AD-A@69 746.ARMY/INTERNATIONAL TRADE/INDUSTRY.
7. Clark, Roy E.; Roat, Candace L. Metrication and DimensionalCoordination: A Selected Bibliography. Washington DC: Center forBuilding Technology, Institute for Applied Technology, NationalBureau of Standards; 1977. 24p.QC100.U57 no. 458; Z7914.Bg; TH420.CONSTRUCTION/STANDARDS/BIBLIOGRAPHY.
8. De Bruin, Jerry; Sherperak, Rita. Touching and Teaching Metrics(9r. K-8). Toledo, OH: JED & Assocs.; 1977; ISBN: 0-916456-08-0.EDUCATION-GRADE SCHOOL.
9. Fact Book of United States Agriculture, 1I88P 1988. 175p.Note: Agriculture Dept., Office of Governmental and PublicAffairs,S/N 001-000-04520-2, UNIT: 2, DOLC: 06-05-89, MP1063.AGRICULTURE.
10. Faulkner, Howard M. Medicine & Metrication. 2nd ed. 10245Andasol Ave., Northridge, CA 91325: USMA; 1977. 36p.MEDICINE.
11. Faulkner, Howard M. Metric Style Manual For Written andComputer Usage. 10245 Andasol Ave., Northridge, CA 91325: USMA;1977. 17p.STYLE MANUAL/SECRETARIAL.
12. Friesth, E.R. Metrication For Manufacturing. New York:Industrial Press; Jan. 1978. 37 3p, illus., includes index.;ISBN: 0-8311-1120-8.T50.5 F912 1978; avail, at RSIC.MANUFACTURING.
13. Frischman, Bernard Lyon; Loshak, Lionel; Strelka, Charles S.Metric Architectural Drawing: A Manual for Designers andDraftsmen. New York: Wiley; 1981. 191p.T355 F917 1981; avail, at RSIC.DRAFTING/ARCHITECTURE.
14. Gutmann, Frederick T. Metric Guide to Mechanical Design andDrafting. New York: Industrial Press; 1978. 76p.T352 G984 1978; avail, at RSIC.DRAFTING/MECHANICAL DESIGN.
15. Handbook for Metric Usage. 1st ed. Washington DC: AmericanHome Economics Association; 1977. 41p, includes index;ISBN: 0-8461-5031-X.R QC92.U5 H236 1977; avail, at RSIC.HOME ECONOMICS.
16. Hilts, Michael E. Basic Consumer Metrics. Hinsdale, IL:Continuing Educational Systems, Inc.; 1979.CONSUMERS/EDUCATION-GENERAL.
17. Hitchcock, H.H.; Coates, J.F.; Canavan, M.M.; Prillaman, G.H.;Nettles, M.S., Joseph F.Coates, Inc., Washington DC. TheConsequences of Metric Production for Small Manufacturers. Vol.2: Case Studies of Large Business-Small Business Interactions:1982: 284p.MANUFACTURING/MARKETING/COMMERCE.
18. Hornung, William J. Metric Architectural Construction:Drafting and Design Fundamentals. Englewood Cliffs, NJ: Prentiss-Hall. 196p, illus.TH203j H816 1981; avail, at RSIC.DRAFTING/ARCHITECTURE/CONSTRUCTION.
2
19. Jakuba, Stanislav R. SI Metric for the Practicing MechanicalEngineer. 400 Commonwealth Dr., Warrendale, PA: Society ofAutomotive Engineers, Inc. 18p.Note: 0-148-7191/85/0225-0218.ENGINEERING-bECHANICAL/HANDBOOK.
20. Jerd, Russell F. Industrial Metric Conversion. Bloomington,IN: Tichenor Pub.; 1983. 92p; ISBN: 0-89917-391-8.INDUSTRY.
21. Karim, G.A.; Hamilton, A.B. Metrication for the E & PProfessional. Boston: International Human Resources DevelopmentCorp.; 03/1981. 10p, illus., includes index; ISBN: 0-934634-03-3;0-934634-09-2.QC91 KI8 1981,avail. at RSIC.ENGINEERING/PHYSICS.
22. Kverneland, Knut 0. Weld Metric Standards for Engineering;1978. 760p.FASTENERS/WELDING/ENGINEERING-MECHANICAL.
23. The Law and Rules on the Phillipine Metric System. QuezonCity, Metropolitan Manila; Phillipine Law Gazette: Diliman; 1983.92p.LEGISLATION/PHILLIPINES-METRICATION.
24. LeBlanc, John. MeasureMetric Test Development; Dec. 1977.96p.Note: NTIS ED-156;RR-56.EDUCATION-GRADE SCHOOL.
25. Lindbeck. Metric Practices in Drafting. New York, NY: Bennett,IL; 1979; ISBN: 0-02-665240-4.DRAFTING.
26. Mahaffey, Charles T. International Trends and Developments ofImportance to the Metrication Plans of the U.S. ConstructionCommunity. Washington DC: U.S. Department of Commerce, NationalBureau of Standards; 1978. 65p.TH420 M214 1978; avail, at RSIC.CONSTRUCTION.
27. Martinek, Antonin. Metric (SI) In Engineering Technology.Kitchener: Metric Engineering, Inc.; 1977. 194p, illus., inclueesbibliography and index.QC91 M385 1977; avail, at RSIC.ENGINEERING/ENGINEERING TECHNOLOGY.
28. Merenstein, Gerald B.; Gardner, Sandra L. Handbook of NeonatalIntensive Care. 2nd ed. St. Louis, MO: Mosby; 1989. 734p, illus.;ISBN: 0801634156.LC RJ253.5 .H36 1989; NLM WS 420 H236; (Dewey) 618.92/01.MEDICINE.
3
29. Metric Conversion in the Construction Industries: Planning,Coordination and Timing. Washington DC: American National MetricCouncil; 1980. 62p; ISBN: 0-688-70983-2.CONSTRUCTION.
30. Metric Guide for Educational Materials: A Handbook forTeachers, Writers & Publishers: American National Metric Council,Educational Materials Sector Committee; 1977; ISBN: 0-916148-09-2.QC91 A512 1977; avail, at RSIC.EDUCATION-GENERAL/PUBLISHING.
31. Metric Guide for Heating. Refrigerating. Ventilating, and AirConditioning. 2nd ed. New York: American Society of Heating,Refrigerating, and Air Conditioning Engineers; 1977. 16p.T50.5 A512 1977; avail, at RSIC.HEATING/AIR CONDITIONING/REFRIGERATION.
32. Metric Handbook for Federal Officials: Recommendations of theInteragency Committee on Metric Policy. Springfield, VA: USDepartment of Commerce, National Technical Information Service;Aug. 1986. 47p. Note: NTIS PB86-226370.QC91 M594 1986; avail, at RSIC.HANDBOOK-FEDERAL.
33. Metric Information Dissemination Project for Educators &Consumers. Final Report of Grant NIE-G-78-0221, The MetricInformation Dissemination Project for Educators & Consumers to theNational Institute of Education. Martha A. Duggan, ProjectDirector; Nancy C. Munley, Research Assistance. Washington DC:National Institute of Education; 1979.QCQ2.U5 A512 1979; avail, at RSIC.EDUCATION-GENERAL/CONSUMERS.
34. Metric Laws and Practices in International Trade. (A Handbookfor U.S. Exporters). Washington DC: GPO; Sep. 1977. 74p.R QC91 U5 1978.INTERNATIONAL TRADE/HANDBOOK.
35. Metric Now' Your Guide to Metrication in Singapore. Singapore:Singapore Metrication Board. 196p, illus.T50.5. M47.SINGAPORE-METRICATION.
36. Metric PlanninA For Vocational Education. Ruth A. Sievers,editor. Arlington, VA: American Vocational Association; 1981. 12p.QC93 A512 1981; avail, at RSIC.EDUCATION-VOCATIONAL.
37. Metric Practice Guide for Surveying and Mapping. Falls Church,VA: ACSM; 1978. 12p, includes bibliographical references.(American Congress on Surveying and Mapping).TA549 A512 1978; avail, at RSIC.SURVEYING/MAPPING.
4
38. Metric Practice Guide for the WeldinA Industry: A1.l: AmericanWelding Society Staff; 1980. 30p; ISBN: 0-87171-194-X.TS227.2 A512 1975; avail, at RSIC (1975 ed.).WELDING.
39. Metric System Guide. Neenah, WI: J.J. Keller & Associates;1980. 5 v.(looseleaf); ISBN: 0-934674-09-4.QC92.U5 K29 1976 vols. 1-5; avail, at RSIC.POLICIES AND REGULATIONS/HANDBOOK.
40. The Metric System: A Review of Industrial Applications.Sanibel, FL: SME Press; 1982. 212p. (Siggson, Al);ISBN: 0-87263-108-7.
QC92.U54 M594 1982; avail, at RSIC.INDUSTRY.
41. Metric Yearbook: 1978. 4th ed. Neenah, WI: J.J. Keller; 1978;ISBN: 0-934674-40-X.QC92.U5 K29 1978; avail, at RSIC.YEARBOOKS.
42. Metric Yearbook: 1979. 5th ed. Neenah, WI: J.J. Keller; 1979;ISBN: 0-934574-40-X.QC92.U5 K29 1979; avail, at RSIC.YEARBOOKS.
43. Metric Yearbook: 1981. 7th ed. Neenah, WI: J.J. Keller; 1981;ISBN: 0-934674-40-X.QC92.U5 K29 1981; avail, at RSIC.YEARBOOKS.
44. Metric Yearbook: Metrication in the U.S.: Capsule Reports onProgress in Government, Industry, Education and other Sectorsduring 1976. 3rd ed. Neenah, WI: J.J. Keller; 1977. 195p;ISBN- 0-934674-40-X.QC92.U5 K29 1977; avail, at RSIC.YEARBOOKS.
45. Metric Yearbook: Metrication in the United States--Progress inIndustry, Education & Government Durin 1980. 6th ed. Neenah, WI:J.J. Keller; 1980. (Laux, Patricia); ISBN: 0-934674-40-X.QC92.U5 K29 1981; avail, at RSIC.YEARBOOKS.
46. Metric: Where We've Been and Where We're Going. Presented atthe American National Metric Council Annual Conference, SanFrancisco, CA, May 13, 1980. Washington DC: American NationalMetric Council; 1980. 60p. (Molitor, Graham, editor).QC91 M725 1980; avail, at RSIC.COMMENTARY.
5
47. Metrication & the Consumer: The Issue of Deception in theMarketplace & Planning for Practical Metric Packaging. ConsumerLiaison Committee of the Council. Washington DC: American NationalMetric Council; 1978. (Boselovic, Len, Editor);ISBN: 0-916148-14-9.QCg1 A512 1978; avail, at RSIC.HOME ECONOMICS/CONSUMERS/PACKAGING.
48. Metrication and the Consumer: Planning for Practical MetricPackaging. Washington DC: American National Metric Council; 1978.QC91 A512 1978; avail, at RSIC.PACKAGING.
49. Metrication for the Modeller. Tucson, AZ: Aztex Corp.; 1979.40p; ISBN: 0-85344-137-5.MODELS AND MODELMAKING.
50. Metrication; Report to Parliment 2 the Department of Pricesand Consumer Protection. London: H.M. Stationery Office; 1977.25p; ISBN: 0-115120-68-8.QC92.G7 G68 1977.UNITED KINGDOM-METRICATION.
51. Michaelson, M. The Metric System and Metric Conversion: AChecklist of References. Mankato, MN: Minnesota Scholarly Press;1978. 118p, includes index.Z7144.W4 M53; QC91.BIBLIOGRAPHY.
52. Milton, Hans J. International and National Standards onDimensional Coordination. Modular Coordination, Tolerances andJoints in Building. Washington DC: US Department of Commerce,National Bureau of Standards; 1980. 154p.Note: NBS-SP-595; LC 80-600147.TH860 M662 1980; avail, at RSIC.STANDARDS-BUILDING/DIMENSIONAL COORDINATION.
53. Milton, Hans J. Metric Dimensional Coordination. WashingtonDC: US Department of Commerce, National Bureau of Standards; 1978.72p. (Berry, Sandra A., editor).TH860 M594 1978; avail, at RSIC.DIMENSIONAL COORDINATION.
54. Milton, Hans J. Metrication in Building Design. Production,and Construction: A Compendium of 10 Papers. Washington DC: U.S.Department of Commerce, National Bureau of Standards; 1978. 186p,illus., includes index.QC1O0.U57 no.530; TH153.BUILDING DESIGN/CONSTRUCTION.
55. Milton, Hans J. Selection of Preferred Metric Values forDesign and Construction: U.S. Government Printing Office; 1978.QC92.U5 M662 1978; avail, at RSIC.CONSTRUCTION/BUILDING DESIGN.
6
56. National Physical Lab. SI-The International System of Units;1977. 58p. (Page, Chester, editor).QC94 161 1977; avail, at RSIC.STANDARDS-UNITS OF MEASUREMENT.
57. Palyza, M.M. Useful Books of Reference for Designers (1926-1983) Held by the Science Reference Library: Part I- Units inPhysics, Metrication, Metallurgy, Computers in Engineering, CivilEngineering. Wolfeboro, NH: Longwood Pub Group; Sep. 1984.168p; ISBN: 0-7123-0712-5.ENGINEERING-CIVIL/BIBLIOGRAPHY/ENGINEERING-METALS.
58. Quasim, S.H. SI Units in Enginevring and Technology.Elmsford, NY: Pergamon; 1977. 64p; ISBN: 0-08-021278-8.ENGINEERING/TECHNOLOGY.
59. Selected Bibliography for Metrication in Business andIndustry. Pierce, Denise, Editor. Ellis Associates, Inc. MetricConversion Paper n 14 1977. 42p.BIBLIOGRAPHY.
60. SI-7 ASME Text Booklet, SI Units in Heat Transfer: AmericanSociety of Mechanical Engineers, 345 East 47th Street, New York,NY 10017; 1977. 36p. (Murdock, J.W., editor).ENGINEERING-MECHANICAL/HEAT TRANSFER.
61. Stockbridge, J.M. Metric Machinery Fasteners. Flint, MI: TheStandards Handbook Company; 1977. 50p.TT1320 S864 1977; avail, at RSIC.FASTENERS-STANDARDS/FASTENERS.
62. Tutt, Patricia; Adler, David. New Metric Handbook. London:London Architectural Press; 1979. 504p, illus., includes index.NA2590 N532 1979; avail, at RSIC.ARCHITECTURE/HANDBOOK.
63. Wallach, Paul. Metric Drafting. Encino, CA: Glencoe Pub. Co.668p, illus., includes index.T353 W195 1979; avail, at RSIC.DRAFTING.
64. Wandmacher, C. Metric Units in EngineerinX-Going SI. New York:Industrial Press; 1978. 302p, includes index.QC91 W245 1978; avail, at RSIC.FLUID MECHANICS/THERMODYNAMICS/HEAT TRANSFER/STATICS/ENGINEERING-ELECTRICAL/MAGNETISM/LIGHT/ENGINEERING.
65. Whyte, W.S.; Paul, R.E. Basic Metric Surveying. 3rd ed.Stoneham, MA: Butterworth Pub.; 1985. 336p; ISBN: 0-408-01354-0.SURVEYING.
7
66. Wolff, Ernst. Metrication for Engineers. 2nd ed. contributionsby Earl G. Mills and Kathy 0. Hoffman. Dearborn, MI: Society ofManufacturing Engineers, Marketing Services Division; 1983.183p,illus. (Valerie Antoine, editor); ISBN: 0-87263-095-1.QC9 W858 1983; avail, at RSIC.ENGINEERING-MANUFACTURING.
8
SUBJECT INDEX - BOOKS
AGRICULTURE: 9
AIR CONDITIONING: 31
ARCHITECTURE: 13,18,62
ARMY: 5,6
BIBLIOGRAPHY: 7,51,57,59
BUILDING DESIGN: 54,55
BUSINESS: 3
COMMENTARY: 46
COMMERCE: 17
CONSTRUCTION: 7,18,26,29,54.55
CONSUMERS: 16,33,47
COST ANALYSIS: 3
DIMENSIONAL COORDINATION: 52,53
DRAFTING: 13,14,18,25,63
ECONOMIC IMPACT: 5
EDUCATION-GENERAL: 16,30,33
EDUCATION-GRADE SCHOOL: 8,24
EDUCATION-PRESCHOOL: 4
EDUCATION-VOCATIONAL: 36
ENGINEERING: 21,27,58,64
ENGINEERING TECHNOLOGY: 27
ENGINEERING-CIVIL: 57
ENGINEERING-ELECTRICAL: 64
ENGINEERING-MANUFACTURING: 66
ENGINEERING-MECHANICAL: 1,19,22,80
ENGINEERING-METALS: 57
9
FASTENERS: 22,61
FASTENERS-STANDARDS: 61
FLUID MECHANICS: 64
HANDBOOK: 19,34,39,62
HANDBOOK-FEDERAL: 32
HEAT TRANSFER: 60,64
HEATING: 31
HOME ECONOMICS: 15,47
INDUSTRY: 6,20,40
INTERNATIONAL TRADE: 6,34
LEGISLATION: 23
LIGHT: 64
MAGNETISM: 64
MANAGEMENT: 3,5
MANUFACTURING: 12,17
MAPPING: 37
MARKETING: 17
MECHANICAL DESIGN: 14
MEDICINE: 10,28
MODELS AND MODELMAKING: 49
PACKAGING: 47,48
PHILLIPINES-METRICATION: 23
PHYSICS: 21
POLICIES AND REGULATIONS: 39
PUBLISHING: 30
REFRIGERATION: 31
SECRETARIAL: 2,11
10
SINGAPORE-METRICATION: 35
STANDARDS: 7
STANDARDS-BUILDING: 52
STANDARDS-STEAM: 1
STANDARDS-UNITS OF MEASUREMENT: 56
STATICS: 64
STYLE MANUAL: 2,11
SURVEYING: 37,85
TECHNOLOGY: 58
THERMODYNAMICS: 64
UNITED KINGDOM-METRICATION: 50
WELDING: 22,38
YEARBOOKS: 41,42,43,44,45
11
CONFERENCE PROCEEDINGS
67. Aerospace Congress & Exposition - Society of AutomotiveEngineers. Aerospace Congress & Exposition - Society of AutomotiveEngineers SAE Technical Paper Series. Warrendale, PA: SAE; 1983.STANDARDS/ELECTRICAL EQUIPMENT/FLUID MECHANICS/AVIONICS.
68. Akers, A. (Iowa State University, Dept. of Engineering Science& Mechanics, Ames, IA). 'Difficulties Experienced in TeachingFluid Power Courses'. National Conference on Fluid Power, FortiethAnnual Meeting; 1984; v 38: p299 -302.ENGINEERING/FLUID MECHANICS/EDUCATION-ENGINEERING.
69. (American Gas Association, Arlington, VA). American GasAssociation, Operating Section, (Distribution Conference, NewOrleans, LA, 2-4 May, 1977 and Transmission Conference, St. Louis,MO, 16-18 May, 1977). Arlington, VA; 1977.Note: E17805033294; E178036375.PETROLEUM/INDUSTRY-GAS/MOTOR VEHICLE.
70. Andras, John (D-M-E Co, Madison Heights, MI). *Designing withMetrics*. SPE Pac Tech Conference, 3rd; 2-3 Feb, 1978; SanFrancisco, CA. Greenwich, CT: SPE; 1978. llp.Note: E17901004920; E179072464.PLASTICS/INDUSTRY/ENGINEERING/DESIGN.
71. Andras, John (D-M-E Co, Madison Heights, MI). 'Metrics inDesign. SPE Annual Technical Conference, 35th; 25-28 Apr, 1977;Montreal, Quebec. Greenwich, CT: SPE; 1977: p80-82 .Note: E17712091189; E177053168.MANUFACTURING/ENGINEERING/DESIGN/INDUSTRY.
72. Andrews, Sydney D. (Florida Dept. of Agriculture & ConsumerServices, Division of Standards, Tallahassee, FL). 'State MetricActivities*. Standards Engineering Society: The Spectrum ofEvolving Standards Proceedings, 32nd Annual Conference; 26-28Sep, 1983; Dayton, OH. Minneapolis, MN: Standards EngineeringSoc.; 1983: p205-209 .
Note: EIM8404-032505; avail, at RSIC.TA 368 S785 1983M32.ENGINEERING/FLORIDA-METRICATION/STANDARDS.
73. Antoine, V. (Litton Industries, Metric Planning, U.S. MetricAssociation, Northridge, CA). 'Implementing This New TechnologyCalled SI'. Engineers' Society of Western Pennsylvania;International Technology Institute; 3-6 May, 1982; Pittsburgh, PA.Note: Available from International Technology Institute, 7125Saltsburg Rd., Pittsburgh, PA 15235; Pap.* ICTTE-82-187.TECHNOLOGY/ENGINEERING.
12
74. Arrowood, J.M. (Westinghouse Electric Corp., Brussels,Belgium). 'F-16 Consortium Co-Production Quality Control. AmericanSociety for Quality Control, 34th Annual Technical ConferenceTransactions 598-805; 1980: XXIX+837.Note: avail, at RSIC.TS 155 A512 1980M34.INTERNATIONAL TRADE/AVIONICS.
75. (ASCE, New York, NY). ASCE Convention & Exposition; 27-31 Oct,1980; Hollywood, FL. New York, NY: ASCE; 1980.Note: EI8112097571; EI81013731.ENGINEERING-CIVIL/CONSTRUCTION/ENGINEERING-GEOTECHNICAL.
76. Barry, E. *Metric Conversion in Industry as Planned by thePaint Industry in Canada'. Chemical Institute of Canada/AmericanChemical Society; 29 May - 2 Jun, 1977; Montreal, Canada.ENGINEERING-CHEMICAL/INDUSTRY/CANADA-METRICATION.
77. Bartlett, A.A. (University Of Colorado). 'Educational Problemsand Progress in Metrication'. American Physical Society 1980Annual Meeting; 21-24 Jan, 1980; Chicago, IL: American PhysicalSociety; v 8 n 3.Note: abstracts in Bulletin of the American Physical Society(ISSN: 0003-0503, CODEN: BAPSA8),Series II, v 25 n 1, Jan. 1980.EDUCATION-GENERAL/PROGRESS IN METRICATION.
78. Baugh, E.L. (General Motors Corporation). 'Metrication in aManufacturing Environment'. American Physical Society 1980 AnnualMeeting; 21-24 Jan, 1980; Chicago, IL: American Physical Society;v 8 n 3.Note: abstracts in Bulletin of the American Physical Society(ISSN: 0003-0503, CODEN: BAPSAS), Series II, v 25 n 1, Jan. 1980.MANUFACTURING/ENGINEERING-MANUFACTURING.
79. Belensky, Michael J. (Philadelphia Gas Works, Customer ServiceDept., Philadelphia, PA). "Status Report on the Movement TowardMetrication'. American Gas Association, Operating Section(Distribution Conference and Transmission Conference); 3-5 and 17-19 May, 1982; Washington DC and Chicago IL. Arlington, VA;1982: pT344-T346.Note: EIM8401-001228.PROGRESS IN METRICATION/INDUSTRY-GAS.
80. Berry, Sandra A. (National Bureau of Standards, Washington DC,National Engineering Lab). *Research and Innovation in theBuilding Regulatory Process'. NBS/NCSBCS Joint Conference (4th) inconjunction with the Annual Meeting of the National Conference ofStates on Building Codes and Standards (12th) (Final report); 11Sep, 1979; St. Louis, MO: National Conference of States onBuilding Codes and Standards, Inc., McLean, VA; Jun, 1980. 279p.Note: NTIS PB80-207632; LC80-600080; see report dated Jun. 1977,PB-267 310; NBS-SP-586.BUILDING CODES/BUILDING DESIGN/ENGINEERING-ENVIRONMENTAL.
13
81. Berry, Sandra A.; Milton, Hans J. (National Bureau ofStandards, Washington DC, Office of Building Standards and CodesServices). 'Metric Dimensional Coordination - the Issues andPrecedent*. Joint Conference of the Design Sector and ConstructionProducts Sector of the Construction Industries CoordinatingCommittee of the American National Metric Council; 6 Jun, 1977;Washington DC; Feb, 1978. 79p.Note: NTIS PB-277 676/3; NBS-SP-504; LC78-606001.CONSTRUCTION/DIMENSIONAL COORDINATION/STANDARDIZATION/STANDARDS.
82. Blaine, R.L. (DuPont Instruments). 'Metrication of ThermalAnalysis: Conversion to SI Units'. Pittsburgh Conference onAnalytical Chemistry and Applied Spectroscopy, 1978; 27 Feb.- 3Mar, 1978; Cleveland, OH.ENGINEERING-CHEMICAL.
83. Burgan, Jr., W.G. (Martin Marietta Corporation). *What's GoingOn in the Defense Area in Regard to Metrication'. SME TechnicalPaper Series, MM for Int Eng Conference, Book 3, Pap MM77-378;9-12 May, 1977; Detroit, MI; 1977: 13p.Note: E17807051612; E178053886.DEPARTMENT OF DEFENSE/AEROSPACE/POLICIES AND REGULATIONS.
84. Burns, J.E. (National Physical Lab, Teddington, UK). 'New SIUnits Problems of Conversion*. International Symposium on Advancesin Radiation Protection Monitoring, International Atomic EnergyAgency; 26-30 Jun, 1978; Stockholm, Sweden.Note: Available from IAEA, 11 Kaerntnerring, POB 590, A-1010Vienna 1, Austria.PHYSICS/ASTRONOMY.
85. Chalabi, Fattah; Vanzler, F. (Worchester PolytechnicInstitute, Worcester, MA). 'What the Construction Industry Thinksof Metrication'. American Society of Civil Engineers 1980 AnnualConvention and Exposition; 27-31 Oct, 1980; Hollywood-by-the-Sea,FL: American Society of Civil Engineers; v 9 n 3.CONSTRUCTION/INDUSTRY/ENGINEERING-CIVIL.
86. Clark, Robert L. (Metric Time System, Inc., El Dorado Hills,CA). 'Metric Time-Angle System'. American Congress on Surveyingand Mapping, 1982 ACSM-ASP Convention, 42nd Annual Meeting; 14-20Mar, 1982; Denver, CO. Falls Church, VA; 1982: p354-360.Note: EIM8303-016975.AEROSPACE/SURVEYING/MAPPING/TIME AND ANGULAR MEASURES.
87. Conley, John E. (GE, Bridgeport, CT). 'Selection of StandardSizes for Metallic Electrical Conductors for Insulated Wires andCables". IEEE Power Engineering Society Winter Meet; 29 Jan. -3 Feb, 1978; New York. New York: IEEE; 1978; Pap F 78 036-6. 6p.Note: E17904023888; E179025740; E17807048960; E178023784; alsopublished in the IEEE Transactions on Power Apparatus and System,v PAS-97 n 6, Nov/Dec, 1978, p2127-2133.STANDARDS/ENGINEERING-ELECTRICAL.
14
88. Cooke, Patrick W. (National Bureau of Standards, WashingtonDC, Office of Building Standards and Codes Services). *Researchand Innovation in the Building Regulatory Process'. NBS/NCSBCSJoint Conference (1st) in Conjunction with the Annual Meeting ofthe National Conference of States on Building Codes and Standards,Inc. (9th); 21-22 Sep, 1978; Providence, RI. McLean, VA: NationalConference of States on Building Codes and Standards, Inc.; Jun,1977. 504p.Note: NBS-SP-473; NTIS PB-267 310/1; LC77-8273.BUILDING CODES/BUILDING DESIGN.
89. Cooke, Patrick W. (National Engineering Lab. (NBS), WashingtonDC, Building Economics and Regulatory Technology Division).*Research and Innovation in the Building Regulatory Process'(Final report). NBS/NCSBCS Joint Conference (3rd) on Researchand Innovation in the Building Regulatory Process; 12 Sep, 1978;Annapolis, MD. McLean, VA: National Conference of States onBuilding Codes and Standards, Inc.; Jul. 1979. 361p.Note: NBS-SP-552; NTIS PB-298 627/1.BUILDING CODES/BUILDING DESIGN/STANDARDS.
90. Corey, J.F. (Testing & Evaluation Labs, Fibreglass Division,PPG Industries, Shelby, NC). *Metrication of Standards'. StandardsEngineers Society 29th Annual Conference; 21-24 Sep, 1980;Minneapolis, MN: Standards Engineering Society; v 8 n 12.Note: avail, from SES, 6700 Penn Avenue South, Minneapolis, MN55423; in bound volume Nov. 1980.STANDARDS/ENGINEERING.
91. Crisp, P.B. (Datron Instruments Limited, Norwich, UK).'Changes to the Volt and Ohm - An Industry View'. IEE ColliquiumOn Changes in the Value of the UK National Reference Standards forthe Volt and the Ohm (Digest No. 7); 20 Jan, 1989; London, UK:IEE; 1989: pl-5. 22p.ELECTRICITY/STANDARDS-UNITS OF MEASUREMENT.
92. Cuddy, L.M. (Oak Ridge National Lab, Oak Ridge, TN; Departmentof Energy, Washington DC). *Return on Your Metrication Investment:A Case Study'. Productivity Opportunites of Metrication, 7thAnnual Conference; 13 Apr, 1981; Washington DC; 1981. 29p.Note: NTIS CONF-810449-I.COST ANALYSIS/DEPARTMENT OF ENERGY.
93. (Office of the Deputy Secretary of Defense, Research andEngineering- Acquisition Policy, Washington DC). Department ofDefense Metric Seminar/Workshop 1980; 18-20 Dec, 1980; WashingtonDC: 23 Apr, 1981; 1981. 185p.NATO/DEPARTMENT OF DEFENSE/POLICIES AND REGULATIONS/LEGISLATION-FEDERAL.
15
94. Donoho, Thomas E. (Baltimore Gas & Electric Company.Baltimore, MD). 'Metrication Update'. American Gas Association,Operating Section (Distribution Conference & TransmissionConference); 3-5 and 17-19 May, 1982; Washington DC and ChicagoIL. Arlington. VA: American Gas Association; 1982: pD223-D224.Note: EIM8401-001157.PROGRESS IN METRICATION/INDUSTRY-GAS/POLICIES AND REGULATIONS.
95. Duxbury, R. 'Metric Conversion Implications for the ChemicalIndustry in Canada'. Chemical Institute of Canada/AmericanChemical Society Second Joint Conference; 29 May - 2 Jun, 1977;Montreal, Canada.CANADA-METRICATION/INDUSTRY/ENGINEERING-CHEMICAL.
96. Egbert, Norman F. (GM Corp). *Design, Development and CostImpacts Resulting from Metrication of T800-LHT-800 TurboshaftEngine*. American Helicopter Society, 43rd Annual Forum; 18-20May, 1987; St.Louis MO. Alexandria, VA: American HelicopterSociety; 1987; v 2 (A88-22726 07-01): p739-746.Note: EIM8802-007376; AEROSPACE A88-22781; avail, at RSIC.TL 716.AL A512 1987M43V2.LHX/AVIONICS/ARMY/ECONOMIC IMPACT/COST ANALYSIS.
97. Eldin, Hamed K.; Rasaratnam, Logendran (School of IndustrialEngineering and Management, Oklahoma State University, Stillwater,OK). 'Economic Model for Metric Conversion Investment'. IEEEInternational Large Scale Systems Symposium, 1982; avail, fromIEEE Service Center, Piscataway, NJ, Cat. n 82CH1741-8. New York,NY: IEEE; 1982: p202-205.Note: avail, at RSIC,QA402 159 1982.COST ANALYSIS/INTERNATIONAL TRADE/ENGINEERING.
98. Fames, P.E.; Richards, R.P. (USDA, Soil Conservation Servi'ce,Bozeman, MT). 'Does Your Snow Sampler Overmeasure". Western SnowConference, 52nd Annual Meeting; 17-19 Apr, 1984; Sun Valley, ID.Spokane, WA: Western Snow Conference; 1984: p192.Note: EIM8503-014136.DEPARTMENT OF AGRICULTURE/SNOW SAMPLING.
99. Fames, Phillip E.; Ned R.Peterson; Barry E. Goodison; RobertP. Richards (Soil Conservation Service, Bozeman, MT). "Metricationof Manual Snow Sampling Equipment'. Western Snow Conference, 50thAnnual Meeting; 19-23 Apr, 1982; Reno, NV; 1982: p120-132.Note: EIM8308-043858; avail, from Robert T. Davis, SoilConservation Service, Spokane, WA.SNOW SAMPLING/STANDARDS-UNITS OF MEASUREMENT/DEPARTMENT OFAGRICULTURE.
100. Foss, S.K. (John Deere Waterloo Tractor Works, Waterloo, IA).*Deere and Company's Metric Conversion Experience'. Society forExperimental Stress Analysis 1977 Spring Meeting and Exposition;15-20 May, 1977; Dallas, TX.ENGINEERING-CIVIL/ENGINEERING-MECHANICAL/MOTOR VEHICLE.
16
101. Ganapathy, N. (Metric Commission, Canada). *Metric Conversionin Canada'. International Congress on Technology and TechnologyExchange (ICTTE); Engineers' Society of Western Pennsylvania;International Technology Institute; 3-8 May, 1982; Pittsburgh, PA.Note: Can be ordered from International Technology Institute, 7125Saltsburg Rd., Pittsburgh, PA 15235; Pap.* ICTTE-82-320.CANADA-METRICATION/ENGINEERING/TECHNOLOGY.
102. Gardiner, S.R.M. (Western Canada Hydraulics Lab, PortCoquitlam, BC). 'Canada's Metrication Experience in the Field ofHydraulics'. Conference for Applying Research to HydraulicPractice; 17-20 Aug, 1982; Jackson, MS. New York: ASCE; 1982:p504-509 .Note: EIM8301-007679.HYDRAULICS/ENGINEERING-CIVIL/CANADA-METRICATION.
103. Gardiner, S.R.M. (Western Canada Hydraulics Lab, Ltd., PortCoquitlam, BC). 'Canada's Metrication Experience in the Field ofHydraulics'. Specialty Conference on Environmentally Sound Waterand Soil Management; 20-23 Jul, 1982; Orlando, FL. New York: ASCE;1982: p425-430.Note: EIM82'12-059264.CANADA-METRICATION/HYDRAULICS/ENGINEERING-CIVI L.
104. Gat, Uri; Goldman, David; Barker, Robert F.; Peltersson,Bengt G.; Rawl, Richard R.; Siebentritt, Carl (Oak Ridge NationalLab, Oak Ridge, TN and Sandia National Lab, TransportationTechnology Center, Alburquerque, NM). *Panel Discussion I: SI-Metrication in Packaging and Transportation of RadioactiveMaterials". PATRAM '83 - 7th International Symposium on Packagingand Transportation of Radioactive Materials; 15-20 May, 1983; NewOrleans, LA. Springfield, VA: NTIS; 1983; v I (CONF-830528):p475-480.Note: EIM8408-062043.POLICIES AND REGULATIONS/PACKAGING.
105. Gertson, F.P. (Texas Eastern Transmission Corporation).*Metrication Is for Distribution Construction and Maintenance,Too'. American Gas Association, Operating Section, (TransmissionConference and Distribution Conference); 18-20 May, 1981; Anaheim,CA. Arlington, VA; 1981: pDll7-D11g.Note: EIM8404-030243.INDUSTRY-GAS.
106. Goldman, D.T. (National Bureau of Standards). "SI: Prognosisfor the Future (International System of Units). American PhysicalSociety 1980 Annual Meeting; 21-24 Jan, 1980; Chicago, IL.Note: Abstracts in 'Bulletin of the American Physical Society'(ISSN 0003-0503), Series II, v 25 n 1, Jan. 1980.ENGINEERING/PHYSICS.
17
107. Gorin, David (American National Metric Council, Bethesda,MD). 'America's Metric Future'. 1982 Winter Meeting - AmericanSociety of Agricultural Engineers. St. Joseph, MI: ASAE; 1982;82-5548. 12p.PROGRESS IN METRICATION/AGRICULTURE/COMMENTARY.
108. Gossage, S. 'Overview of Metric Conversion in Canada'.Chemical Institute of Canada/American Chemical Society 2nd JointConference; 29 May - 2 Jun, 1977; Montreal, Canada.CANADA-METRICATION/ENGINEERING-CHEMICAL.
109. Granzin, K.L. 'Metrication: A Major Marketing Problem*.Southern Marketing Association Conference; Oct. 1976: p207-209.CONSUMERS/COST ANALYSIS/MARKETING.
110. Henderson, Thomas J. (Atmospheric Inc., Fresno, CA). 'WesternSnow Conference - The First Fifty Years'. Western Snow Conference,50th Annual Meeting; 19-23 Apr, 1982; Reno, NV; 1982: pl- 5 .Note: EIM8306-043843; avail, from Robert T. Davis, SoilConservation Service, Spokane, WA.SNOW SAMPLING/DEPARTMENT OF AGRICULTURE.
111. Herzog, D.R. *Metrication: A Blessing or a Curse to Engineersand Industry*. American Institute of Industrial Engineers AnnualConference; Fall 1980: p494.INDUSTRY/ENGINEERING/COMMENTARY.
112. Holmgren, J.E., Grumman Aerospace Corporation, Bethpage, NY.'Metrication of Aerospace Engineering Computer Programs*. Societyof Allied Weight Engineers, 41st Annual Conference; 17-19 May,1982; San Jose, CA; 1982. 24p.Note: IAA8320; AEROSPACE A83-43745; SAWE paper 1475.COMPUTER PROGRAMMING/AEROSPACE/ENGINEERING.
113. Hudson, Arthur C. (Defense Electronic Supply Center, Dayton,OH). "DoD Standardization of Fiber Optics'. Standards EngineeringSociety: The Spectrum of Evolving Standards Proceedings, 32ndAnnual Conference; 26-28 Sep, 1983; Dayton, OH. Minneapolis, MN:Standards Engineering Society; 1983. 8p.Note: EIM8404-032509; avail, at RSIC.TA 368 S785 1983M32.DEPARTMENT OF DEFENSE/STANDARDIZATION/FIBER OPTICS.
114. Jakuba, Stan R. (S.R. Jakuba Associates, West Hartford, CT).*Metric Conversion: A Decision Whose Time Had Come, Lost Impetus,and Now Is Building Up*. Fall National Design Engineering Show &Conference; 16-18 Sep, 1986; New York. Stamford, CT: CahnersExposition Group; 1986: p21-28.Note: EIM8805-028692.COST ANALYSIS/INTERNATIONAL TRADE/COMMENTARY.
18
115. Janis, E.J. (General Motors Technical Center, Warren, MI).*General Motors Goes Metric*. Society for Experimental StressAnalysis 1977 Spring Meeting and Exposition; 15-20 May, 1977;Dallas, TXENGINEERING-CIVIL/ENGINEERING-MECHANICAL/MOTOR VEHICLE.
116. Johnson, A. Ivan (Woodward-Clyde Consult, Denver, CO).'Metrication Policy and Progress in the United States*. SpecialtyConference on Environmentally Sound Water and Soil Management; 20-23 Jul, 1982; Orlando, FL. New York: ASCE; 1982: p397-404.Note: EIM8212-059260.POLICIES AND REGULATIONS/PROGRESS IN METRICATION/ENGINEERING-CIVIL.
117. Johnson, A. Ivan (Woodward-Clyde Consult, Denver, CO).*Metrication in the United States*. Conference for ApplyingResearch to Hydraulic Practice; 17 Aug, 1982; Jackson, MS. NewYork: ASCE; 1982: p490 -499 .Note: EIM8301-007677.ENGINEERING-CIVIL/POLICIES AND REGULATIONS/PROGRESS INMETRICATION.
118. Johnson, A.Ivan (Woodward-Clyde Consultants, Denver, CO).'The Status of Metrication Standards'. American Society of CivilEngineers 1980 Annual Convention and Exposition; 27-31 Oct, 1980;Hollywood-by-the-Sea, FL: American Society of Civil Engineers;v 9 n 3.PROGRESS IN METRICATION/ENGINEERING-CIVIL.
119. Jones, R.W. (British Standards Institute, England). "Nationaland International Standardization Related to Plastics Pipes"Plastic Pipes, International Conference, 4th; 28-30 Mar, 1979;University of Sussex, Falmer, Brighton, England. London: Plasticsand Rubber Institute; 1979: pl-35.Note: E18002014841; EI8064275.STANDARDIZATION/UNITED KINGDOM-METRICATION/MANUFACTURING.
120. Kalmey, Donald L.; Niccolai, Marino J. (Dept. of AppliedMathematics and Computer Sciences, University of Louisville,Louisville, KY). *A Model for a CAI Learning System'. TwelfthSIGCSE Technical Symposium on Computer Science Education(Association for Computing Machinery, Special Interest Group onComputer Science Education), SIGCSE Bulletin; 26-27 Feb, 1981;St. Louis, MO; Feb. 1981; v 13 n 1: p74-77.Note: EIM8207-022230.COMPUTER-ASSISTED INSTRUCTION/EDUCATION-GENERAL.
121. Kemp, L.J. (Southern California Gas Co). 'American GasAssociation: Metrication Task Committee, 1980-81'. American GasAssociation, Operating Section, (Transmission Conference andDistribution Conference); 18-20 May, 1981; Anaheim, CA. Arlington,VA; 1981: pD318-D319.Note: EIM8404-030282.INDUSTRY-GAS.
19
122. Kind, D. (Phys. Tech. Bundesanstalt, Bundesallee 100, D-3300Braunschweig, Germany). "Highly Accurate Measurements Within theInternational System of Units'. 'International MagneticsConference--INTERMAG '84" Institute of Electrical and ElectronicsEngineers (IEEE) - Magnetics Society; 9-13 Apr, 1984; Frankfurt,Germany.Note: Proceedings in : 'IEEE Transactions on Magnetics* Sep. 1984,v 12 n 10; ISSN 0018-9464.PHYSICS/ENGINEERING-ELECTRICAL.
123. Kruse, E. Gordon; Burdick, Chuck R.; Yousef, Yousef A.Specialty Conference on Environmentally Sound Water and SoilManagement; 20-23 Jul, 1982; Orlando, FL. NY: ASCE; 1982. 52 4p.Note: EIM8212-059209.AGRICULTURE/ENGINEERING-CIVIL.
124. Lally, A. (American Institute of Steel Construction, NewYork, NY). 'Committee on Metrication'. American Society of CivilEngineers Annual Convention and Exposition; 22-26 Oct, 1979;Atlanta, GA: American Society of Civil Engineers; v 8 n 2.Note: papers from ASCE, 345 East 47th Street, New York NY 10047.PROGRESS IN METRICATION/ENGINEERING-CIVIL.
125. Linse, Robert E. (Rockwell International). *Aerospace SectorCommittee of the American National Metric Council'. WESTECConference, SME Technical Paper Series, IQ Book 2; 14-17 Mar,1977; Los Angeles, CA. Dearborn, MI: SME; 1977; pap IQ77-247. 19p.Note: E17811083891; E178053446.AEROSPACE.
126. Locker, H.J., IBM Corporation, National Accounts Division,White Plains, NY. *Impact of Metrication on Data Processingf.Society of Allied Weight Engineers, Annual Conference, 41st; 17-19May, 1982; San Jose, CA; 1982. 4p.Note: IAA8320; AEROSPACE A83-43746; SAWE paper 1476.COMPUTER PROGRAMMING.
127. Maly, R.; Ziegler, G.; Wagner, E. (Inst. Phys. Elekt.,University of Stuttgart). *Modeling of Flame Propagation andEnergy Conversion Rates in SI Engines*. Society of AutomotiveEngineers 1983 International Congress and Exposition; 28 Feb -4 Mar, 1983; Detroit, MI.Note: SAE Pap.* 830331.ENGINEERING-MECHANICAL/ENGINEERING-CIVIL.
128. Mason, J.L., Garrett Corporation, Los Angeles, CA.'International Aerospace Standards - An Overview'. Society ofAutomotive Engineers, Aerospace Congress and Exposition; 3-6 Oct,1983; Long Beach, CA; 1983. 9p.Note: IAA8412; AEROSPACE A84-29835; SAE n831510.AEROSPACE/ENGINEERING/COST ANALYSIS.
20
129. Myers, R.A. (WR Grace & Co.). 'Metric Conversion: A CaseHistory*. 35th Annual Technical Conference of the Society of thePlastics Engineers; 25-28 Apr, 1977; Montreal, Quebec, Canada.PLASTICS/ENGINEERING.
130. (National Bureau of Standards, Washington DC). NationalConference on Weights and Measures (62nd); 17-22 Jul, 1977;Dallas, TX; Aug. 1978. 306p.Note: AEROSPACE N79-13206; NBS-SP-517; NTIS PB-285 112/9;LC26-27766; avail, at RSIC.
QC 89.U5 N277 1978M62.WEIGHTS AND MEASURES/PROGRESS IN ETRICAT!ON.
131. (National Bureau of Standards; National Conference of Stateson Building Codes and Standards). NBS/NCSBCS Ist Joint Conferenceon Research and Innovation in Building Regulatory Process; 1977.STANDARDS/BUILDING CODES/BUILDING DESIGN.
132. Nicovich, Philip A. (Sandia Lab, Albuquerque, NM). *Nationaland International Drawing Standards: Moving Toward BetterAlignment with Y14. 5. SAE 75th Anniversary Aerospace Congress;13-16 Oct, 1980; Los Angeles, CA: SAE; 1980; n 801216. 24p.Note: NTIS SAND-80-2034C; CONF-801051-1; E18106048663; EI81037195.GRAPHIC ARTS/DRAFTING.
133. O'Hagen, M.E. *Metric Conversion in the U.S.'. ChemicalInstitute of Canada/American Chemical Society Second JointConference; 29 May - 2 Jun, 1977; Montreal, Canada.ENGINEERING-CHEMICAL/INDUSTRY.
134. Paullin, Robert L. "Department of Transportation MetricationActivities' (Status report). Third Annual Conference andExposition, American National Metric Council; 21 Mar, 1977;McCormick Inn, Chicago, IL: GPO.TD 1.2-M 56/2.PROGRESS IN METRICATION/DEPARTMFNT OF TRANSPORTATION.
135. Peterson, Alfred, Boeing Aerospace Company, Seattle, WA.'Status Report on Aerospace Metrication. Society of AutomotiveEngineers, Aerospace Congress and Exposition, SAE Technical PaperSeries 831511; 3-6 Oct, 1983; Long Beach, CA. Warrendale, PA: SAE;1983. 14p.Note: AEROSPACE A84-29636; EIM8409-067782.NATO/AEROSPACE/AVIONICS.
136. Reimers, R.M.; Robitaille, R.; Bell, R. (Lawrence BerkeleyLab). 'Metrication Activities at LBL, LLNL, and SLAC'. 1981Particle Accelerator Conference; 11-13 Mar, 1981; Washington DC:American Physical Society; v 9 n 10.Note: abstracts in: Bulletin of the American Physical Society,v 26 n 2, Feb. 1981, APS, 335 East 45th Street, New York, NY10047; ISSN: 0003-0503 Paper * 1-143.PHYSICS/ASTRONOMY/ENGINEERING.
21
137. Rumbold, A.G. (Maritime Lumber Bureau, Amhers, NS, Canada).'Case of Europe: How Will Metric Conversion Improve Our TradingPossibilities?'. Forest Products Research Society Thirty FirstAnnual Meeting, (Rocky Mountain Division); 3-8 Jul, 1977;Denver, CO.Note: Papers in *Forest Products Journal and Wood Science'.INTERNATIONAL TRADE.
138. Saldana, Oscar M.; Ito, Cruz (International Boundary & WaterCommittee), 'Interfacing With Metrification on the Rio Grande'.Conference for Applying Research to Hydraulic Practice. New York:ASCE; 1982: p590-503.HYDRAULICS/ENGINEERING-CIVIL/STANDARDS-UNITS OF MEASUREMENT.
139. Schneider, R. (Siemens Inf. Syst., Boca Raton, FL (Sponsor:Electron. Connector Study Group)). 'DIN-Impact on the US-ConnectorIndustry*. 20th Annual Connectors and Interconnection TechnologySymposium, 375-90; 1987: xiii+458.DIN CONNECTOR/INDUSTRY.
140. Souch, G. (Dept. of Prices & Consumer Protection, MetrolQuality Assurance & Standards Division). 'Measures for Measures*.Int. Quality Assurance Conference, 17th Conference on Advances inQuality Techniques and their Application; 12-13 Oct, 1977; London,England. London: Institute of Quality Assurance; 1977: p5 1-6 3 .Note: E17812091551.INTERNATIONAL TRADE/UNITED KINGDOM-METRICATION/COMMENTARY.
141. Speers, Douglas D.; Davis, Edward M. 'Experience withMetrication in the Operation of the Columbia River ReservoirSystem'. Specialty Conference on Environmentally Sound Water andSoil Management; 20-23 Jul, 1982; Orlando, FL. New York: ASCE;1982: p412-419.Note: EIM8212-059262.RESERVOIRS/ENGINEERING-CIVIL.
142. (Standards Engineers Society, Minneapolis, MN). StandardsEngineers Society, 27th Annual Conference; 18-21 Sep, 1978; LosAngeles, CA. Minneapolis, MN: SES; 1978. 247p.Note: E17908065690; E179086412; avail, at RSIC.T 59 S785 1978M27.POLICIES AND REGULATIONS/MARKETING/INDUSTRY/STANDARDIZATION.
143. Strang, Louis R. (Caterpillar Tractor Company).'Caterpillar's Metrication Experience'. American Gas Association,Operating Section, (Distribution Conference and TransmissionConference); 3-5 and 17-19 May, 1982; Washington DC and Chicago,IL. Arlington, VA: American Gas Association; 1982: pT253-T254.Note: EIM8401-001214.INDUSTRY-GAS/MACHINE TOOLS.
22
144. Sumner, Tim (Sumner & Association). *Designing to Meet MarketRequirements Economically'. Design Engineering Conference, Papersavail, from Conference Community, Surrey, England; 11-13 Nov,1980; Birmingham, England; 1980: pl5.1.l-15.1.18.Note: EIM8207-024317.INDUSTRY/MARKETING/COST ANALYSIS/UNITED KINGDOM-METRICATION.
145. Taylor, H.L. (Inland Steel Resources, East Chicago, IL).'Metrication in the Steel Industry'. American Society ofAgricultural Engineers Winter Meeting (Paper *82-5546); 14-17 Dec,1982; Chicago, IL: American Society of Agricultural Engineers(ASAE), 2950 Niles Road, St. Joseph, MI 49085; v 11 n 2.INDUSTRY/AGRICULTURE/STEEL.
146. Taylor, Harold L. (Inland Steel Company). 'Metrication in theSteel Industry'. American Gas Association, Operating Section,(Distribution Conference and Transmission Conference). Arlington,VA; 1982: pT237-T252.STEEL/INDUSTRY/INDUSTRY-GAS.
147. Tholen, A.D.; Barbrow, L.E.; Heffernan, A.P. (National Bureauof Standards, Washington DC). National Conference on Weights andMeasures (68th); 17-22 Jul, 1983. United States; Sep. 1983. 356p.Note: NTIS PB84-110998; see also PB82-178997; LC26-27766;NBS/SP-663.WEIGHTS AND MEASURES/EDUCATION-GENERAL/PACKAGING/CONSUMERS.
148. Tholen, A.D.; Barbrow, L.E.; Heffernan, A.P. (The NationalBureau of Standards, Gaithersbury, MD). 'National Conference onWeights and Measures (69th), 1984': National Bureau of Standards;Jan. 1985. 342p.Note: NTIS PB85-178432/XAB; NBS-SP-684;LC26-27766; see also PB82-178997; also available from Supt. of Docs. as SN003-003-02637-9.PACKAGING/WEIGHTS AND MEASURES/CONSUMERS/POLICIES AND REGULATIONS.
149. Tholen, Albert D.; Barbrow, Louis E.; Heffernan, Ann P.(National Bureau of Standards, Washington DC). National Conferenceon Weights and Measures (67th); 12-16 Jul, 1982; Atlanta, GA.United States; Oct. 1982. 332p.Note: NTIS PB83-167148;see also PB82-178997; NBS-SP-645;LC26-27766.EDUCATION-GENERAL/POLICIES AND REGULATIONS/WEIGHTS AND MEASURES.
150. Tufts, Thomas Clark (Tufts And Wenzel, Cleveland, OH).*Metrication- A Controversy and Opportunity'. American Society ofCivil Engineers 1980 Annual Convention and Exposition; 27-31 Oct,1980; Hollywood-by-the-Sea, FL: American Society of CivilEngineers; v 9 n 3.ENGINEERING-CIVIL/PROGRESS IN METRICATION.
23
151. Turnbull, J.E.; Montgomery, G.F. (Engineering & StateResources Institute, Ottawa, Ont). 'SI in Canadian AgriculturalConstruction - An Update'. ASAE Winter Meet; 11-14 Dec, 1979; NewOrleans, LA. St. Joseph, MI: ASAE; 1979; paper 79-4502. 18p.Note: E18007049469; E180001580.AGRICULTURE/ENGINEERING/CONSTRUCTION/CANADA-METRICATION.
152. Underwood, Gerry T. (Deere & Company). 'Deere and CompanyMetric Transition'. American Gas Association, Operating Section,(Distribution Conference and Transmission Conference); 3-5 and 17-19 May, 1982; Washington DC and Chicago, IL. Arlington, VA; 1982:pT255-T257.Note: EIM8401-001215.MANUFACTURING/MARKETING/FASTENERS/MACHINE TOOLS/INDUSTRY-GAS.
153. Van Oot, J.G. 'Metric Conversion Implications for ChemicalIndustry in the United States'. Chemical Institute of Canada/American Chemical Society, Second Joint Conference; 29 May -
2 Jun, 1977; Montreal, Canada.ENGINEERING-CHEMICAL/INDUSTRY.
154. Vernon, David F. (Chevrolet Flint Engine Plant). 'Metricationof a Manufacturing Facility'; 28 Feb-4 Mar, 1977: SAE; 1977;n 770357. 4p.Note: E17710071305; E177006449.MOTOR VEHICLE/INDUSTRY/MANUFACTURING.
155. Vlannes, P.N. (National Aeronautics and Space Administration,Washington DC). "NASA Metrication Activities*. WESTEC '78Conference;sponsored by Society of Manufacturing Engineers; Mar,1978; Los Angeles, CA; 1978. 9p.Note: NASA-TM-79522; IQ78-199; NTIS N78-27293/7.NASA/POLICIES AND REGULATIONS.
156. Wandmacher, Cornelius (University of Cincinnati, OH). 'GoingSI-The Move Ahead'. International Congress on Technology andTechnology Exchange; Engineers Society of Western Pennsylvania;International Technology Institute; 3-6 May, 1982; Pittsburgh, PA.Note: Available from International Technology Institute, 7125Saltsburg Rd., Pittsburgh, PA 15235; Pap.# ICTTE-82-186P.ENGINEERING/TECHNOLOGY.
157. Whelihan, Alan S. (US Metric Board, Standards EngineersSociety). 'Metrication and Standards'. Standards EngineeringSociety: Standards in Focus Proceedings, 30th Annual Conference;12-16 Sep, 1981; Washington DC. Minneapolis, MN: StandardsEngineering Society; 1981: p171-177.Note: EIM8308-060346; avail, at RSIC.T59 S785 1981M30.POLICIES AND REGULATIONS/EDUCATION-GENERAL/STANDARDS.
24
158. Wollin, H.F.; Barbrow, L.E.; Heffernan, A.P. (National Bureauof Standards, Washington DC). National Conference on Weights andMeasures (63rd); 9-14 Jul, 1978; Washington DC; Feb. 1979; 3 28p.Note: AEROSPACE N79-33358; LC26-27766; NTIS PB-296 236/3;NBS-SP-532.CONSUMERS/PACKAGING/WEIGHTS AND MEASURES.
159. WoJ.lin, H.F.; Barbrow, L.E.; Heffernan, A.P. (National Bureauof Standards, Washington DC). National Conference on Weights andMeasures (64th); 23-27 Jul, 1979; Portland, OR; Mar. 1980: 316p.Note: AEROSPACE N80-29538; NBS-SP-566; NTIS PB80-175128;LC26-27766.STANDARDIZATION/WEIGHTS AND MEASURES/PACKAGING/INDUSTRY-GAS.
160. Wollin, Harold F.; Barbrow, Louis E.; Heffernan, Ann P.(National Bureau of Standards, Washington DC, National MeasurementLab). National Conference on Weights and Measures (65th); 23-27Jun, 1980; Washington DC. United States; Jan. 1981. 3 19p.Note: AEROSPACE N81-25272; NBS-SP-599; NTIS PB81-151656; see alsoPB80-175128; LC26-27766.EDUCATION-GENERAL/WEIGHTS AND MEASURES/INDUSTRY-GAS/POLICIES ANDREGULATIONS/INDUSTRY.
161. Wollin, Harold F.; Barbrow, Louis; Heffernan, Ann P.(National Bureau of Standards, Washington DC). National Conferenceon Weights and Measures (66th); 13-17 Jul, 1981; St. Louis, MO.United States; Dec. 1981. 279p.Note: NTIS PB82-178997; see also PB81-151656; NBS-SP-629;LC26-27766; avail, at RSIC.QC 89.U5 N277 1981M66.EDUCATION-GENERAL/PACKAGING/WEIGHTS AND MEASURES/INDUSTRY-GAS/POLICIES AND REGULATIONS.
162. Youngquist, G. (Clarkson College of Technology, Potsdam, NY).*Implementation of SI in Chemical Engineering Education*. AmericanInstitute of Chemical Engineers 71st Annual Meeting; 12-16 Nov,1978; Miami Beach, FL.Note: Papers available from Engineering Societies Library, UnitedEngineering Center, 345 East 47th Street, New York, NY 10017.EDUCATION-ENGINEERING/ENGINEERING-CHEMICAL.
25
SUBJECT INDEX - CONFERENCE PROCEEDINGS
AEROSPACE: 83,86,112,125,128,135
AGRICULTURE: 107,123,145,151
ARMY: 96
ASTRONOMY: 84,136
AVIONICS: 67,74,96,135
BUILDING CODES: 80,88,89,131
BUILDING DESIGN: 80,88,89,131
CANADA-METRICATION: 76,95,101,102,103,108,151
COMMENTARY: 107,111,114,140
COMPUTER PROGRAMMING: 112,126
COMPUTER-ASSISTED INSTRUCTION: 120
CONSTRUCTION: 75,81,85,151
CONSUMERS: 109,147,148,158
COST ANALYSIS: 92,96,97,109,114,128,144
DEPARTMENT OF AGRICULTURE: 98,99,110
DEPARTMENT OF DEFENSE: 83,93,113
DEPARTMENT OF ENERGY: 92
DEPARTMENT OF TRANSPORTATION: 134
DESIGN: 70,71
DIMENSIONAL COORDINATION: 81
DIN CONNECTOR: 139
DRAFTING: 132
ECONOMIC IMPACT: 96
EDUCATION-ENGINEERING: 68,162
EDUCATION-GENERAL: 77,120,147,149,157,160,161
ELECTRICAL EQUIPMENT: 67
26
ELECTRICITY: 91
ENGINEERING: 68,70,71,72,73,90,97,101,106,111,112,128,129,138151,156
ENGINEERING-CHEMICAL: 76,82,95,108,133,153,162
ENGINEERING-CIVIL: 75,85,100,102,103,115,116,117,118,123,124127,138,141,150
ENGINEERING-ELECTRICAL: 87,122
ENGINEERING-ENVIRONMENTAL: 80
ENGINEERING-GEOTECHNICAL: 75
ENGINEERING-MANUFACTURING: 78
ENGINEERING-MECHANICAL: 100,115,127
FASTENERS: 152
FIBER OPTICS: 113
FLORIDA-METRICATION: 72
FLUID MECHANICS: 67,68
GRAPHIC ARTS: 132
HYDRAULICS: 102,103,138
INDUSTRY: 70.71,76,85,95,111,133,139,142,144,145,146,153,154160
INDUSTRY-GAS: 69,79,94,105,121,143,146,152,159,160,161
INTERNATIONAL TRADE: 74,97,114,137,140
LEGISLATION-FEDERAL: 93
LHX: 96
MACHINE TOOLS: 143,152
MANUFACTURING: 71,78,119,152,154
MAPPING: 86
MARKETING: 109,142,144,152
MOTOR VEHICLE: 69,100,115,154
NASA: 155
27
NATO: 93,135
PACKAGING: 104,147,148,158,159,161
PETROLEUM: 69
PHYSICS: 84,106,122,136
PLASTICS: 70,129
POLICIES AND REGULATIONS: 83,93,94,104,116,117,142,148,149155,157,,Lf,161
PROGRESS IN METRICATION: 77,79,94,107,116,117,118,124,130134,150
RESERVOIRS: 141
SNOW SAMPLING: 98,99,110
STANDARDIZATION: 81,113,119,142,159
STANDARDS: 67,72,81,87,89,90,131,157
STANDARDS-UNITS OF MEASUREMENT: 91,99,138
STEEL: 145,146
SURVEYING: 86
TECHNOLOGY: 73,101,156
TIME AND ANGULAR MEASURES: 86
UNITED KINGDOM-METRICATION: 119,140,144
WEIGHTS AND MEASURES: 130,147,148,149,158,159,160,161
28
DOCUENTS/REPORTS-UNCLASSIFIED
163. (United States Metric Board, Arlington, VA). Antitrust. *AHandbook for Metric Planning and Conversion* (Research summary).United States; May, 1980; NTIS AD-AIl5 629/8. 16p.Note: avail, at RSIC.INDUSTRY/COMMERCE/LEGISLATION-FEDERAL/HANDBOOK/ANTITRUST.
164. Barsvary, A.K.; Klym, T.W.; Franklin, J.A. (Ontario HydroResearch Labs, Toronto). *List of Terms, Symbols, and RecommendedSI Units and Multiples for Geotechnical Engineering"; Feb. 1980.8p.Note: avail, at RSIC in Canadian Geotechnical Journal, v 17 n 1,p89-96.ENGINEERING-GEOTECHNICAL/CANADA-METRICATION/ENGINEERING-CIVIL/STANDARDS-UNITS OF MEASUREMENT.
165. Berry, Sandra A.; Milton, H.J. (National Bureau of Standards,Washington DC). *Metric Dimensional Coordination: The Issues andPrecedent (Final report) Metrication in the ConstructionIndustry'; Feb. 1978; NTIS PB-277 676/3; LC78-606001; AEROSPACEN78-25272; NBS-SP-504. 79p.Note: Proceedings of the Joint Conference of the Design Sector andConstruction Products Sector of the Construction IndustryCoordinating Committee of the American National Metric Council,Washington DC, 6 Jun, 1977; avail, at RSIC.CONSTRUCTION/INDUSTRY/STANDARDIZATION/MANAGEMENT.
166. Cetron, M.J.; Roepcke, L.A.; McFadden, C.F.; Sugarek, S.E.;Peters, E.B. (Forecasting International Ltd., Arlington, VA).'U.S. Army Metrication: Analysis and Recommendations for DAImplementation Plan.' Vol. 2: Annexes; 9 Jun, 1978; NTIS AD-A066984/6; AEROSPACE N79-25252. 155p.Note: See also vol. 1, AD-A@69 746; avail, at RSIC.POLICIES AND REGULATIONS/STANDARDS/MANAGEMENT/ARMY/INTERNATIONALTRADE/LEGISLATION-FEDERAL.
167. Cetron, M.J.; Roepcke, L.A.; McFadden, C.F.; Sugarek, S.E.;Peters, E.B. (Forecasting International Ltd., Arlington, VA).'U.S. Army Metrication: Analysis and Recommendations for DAImplementation Plan. Vol. 1; 9 Jun, 1978; NTIS AD-A069 746/6;AEROSPACE N80-11256. 345p.Note: See also vol. 2, AD-A066 984; avail. at RSIC.ECONOMIC IMPACT/ARMY/MANAGEMENT.
29
168. Clark, Roy E.; Roat, Candace L. (National Bureau ofStandards, Washington DC, Center for Building Technology).'Metrication and Dimensional Coordination - A SelectedBibliography' (Final report); Apr. 1977; NTIS PB-266 569/3; NBS-SP-458; LC76-608345; AEROSPACE N77- 28344. 36p.Note: avail. at RSIC.DIMENSIONAL COORDINATION/CONSTRUCTION/BIBLIOGRAPHY/COST ANALYSIS/ECONOMIC IMPACT/HANDBOOK.
169. Coella, Michael A. (Science Management Corp., Washington DC).'Federal Procurement Metrication Appropriateness and Methods*(Final report). United States Metric Board: GPO; 18 Sep, 1982;AEROSPACE N8325911; AD-A123243; NRC-3581-682; NTIS AE-A123 243/8;Y 3.M 56-2 P 94. 85p.Note: avail, at RSIC.PROCUREMENT-FEDERAL/POLICIES AND REGULATIONS.
170. (United States Metric Board, Arlington, VA). 'The Conversionof Retail Fuel Pump Computers to Sale by the Liter' (Finalreport); 29 Jun, 1979; NTIS AD-A15 630/6; SR-79-001. 110p.Note: avail, at RSIC.PETROLEUM/LEGISLATION-FEDERAL/POLICIES AND REGULATIONS/ECONOMICIMPACT.
171. Cozine, R.D. (Sandia Labs, Livermore, CA). *Metrication inthe Department of Energy Weapons Complex': Department of Energy;1977; NTIS SAND-77-8775; CONF-7710124-1. 4p.Note: National Machine Tool Builders Association, Atlanta, GA,Oct. 1977.WEAPONS-NUCLEAR/DEPARTMENT OF ENERGY.
172. Cuddy, L.M. (Oak Ridge National Lab, TN). 'Return on YourMetrication Investment: A Case Study'; 1981; NTIS CONF-810449-1;AEROSPACE N81-30314. 29p.Note: Presented at the 7th Annual Conference on ProductivityOpportunities of Metrication, Washington DC, 13 Apr, 1981;avail, at RSIC.COST ANALYSIS/DEPARTMENT OF ENERGY.
173. Cushen, W. Edward (J.F. Coates, Inc., Washington DC). 'MetricUse in the Tool Industry. A Status Report and a Test of AssessmentMethodology* (Final report). United States; 20 Apr, 1982; NTIS AD-Al18 632/9; AEROSPACE N83-12278. 114p.Note: avail, at RSIC.MACHINE TOOLS/MANUFACTURING/MARKETING/INTERNATIONAL TRADE.
174. (Office of the Deputy Undersecretary of Defense, Research andEngineering (Acquisition Policy), Washington DC). "DoD MetricSeminar/Workshop' (Held in Washington DC, 18-20 November, 1980)(Final report); 23 Apr, 1981; NTIS AD-A099 780/9; AEROSPACE N81-27329. 184pNote: avail, at RSIC.PROGRESS IN METRICATION/LEGISLATION-FEDERAL/DEPARTMENT OFDEFENSE/POLICIES AND REGULATIONS.
30
175. (Middlesex Research Center, Inc., Washington DC). 'Effects ofMetric Change on Workers' Tools and Training* (Final report); Jul.1981; AD$ A107845. 147p.Note: avail, at RSIC.INDUSTRY/CONSTRUCTION/OCCUPATIONAL SAFETY/PACKAGING/ELECTRICITY/MOTOR VEHICLE.
176. (Interagency Committee on Metric Policy, Washington DC,Metrication Operating Committee). *Federal Metric Status: Reportby the Members of the Metrication Operating Committee (MOC)'; Sep,1983; NTIS PB85-15147@/XAB. 138p.GOVERNMENT-FEDERAL/POLICIES AND REGULATIONS.
177. Foote, Mary; Annan, Sampson 0. (Damans and Associates, Inc.,Rockville, MD). 'Survey of Small Businesses: Issues in MetricPlanning and Conversion* (Final report 1979 to 1980); Dec. 1980;ADS A095103. 10p.Note: avail, at RSIC.BUSINESS-SMALL/MANUFACTURING/CONSTRUCTION/COMMERCE.
178. (General Accounting Office, Washington DC, Community andEconomic Development Div.). *Getting a Better Understanding of theMetric System - Implications If Adopted by the United States*(Report to the Congress); 20 Oct, 1978; NTIS PB-295 498/0 and PB-287 217/4; CED-78-128; AEROSPACE N79-31441. 752p.Note: avail, at RSIC.ECONOMIC IMPACT/COST ANALYSIS/MANAGEMENT/EDUCATION-GENERAL.
179. Gilsinn, Judith F. (National Bureau of Standards, WashingtonDC, Applied Mathematics Div.). *Problems in World-WideStandardization of the Units of Altitude Measurement' (Technicalreport): Federal Aviation Administration, Washington DC, Office ofSystems Engineering Management; Feb. 1978; NTIS PB-277 982/5;NBS IR-77-1386. 25p.AVIONICS/ALTIMETERS/AIR TRAFFIC CONTROL/FAA.
180. Goldman, D.T. (National BureaJ of Standards, Washington DC).'The Metric System: Costs vs. Benefits: A Summary Overview'; 1980;NTIS PB8I-126302. 7p.INDUSTRY/ECONOMIC IMPACT/COST ANALYSIS.
181. Gonzales, Richard R. (Army Research Institute ofEnvironmental Medicine, Natick, MA). 'Conversion Units Common toBiomedical Research on Military Clothing'; Apr. 1985; ADS A162828;USARIEM-TS/85. 25p.Note: avail, at RSIC.STANDARDS/CLOTHING/ENGINEERING-BIOMEDICAL/MEDICINE.
182. Government Printing Office: Technical Report No. I - 9. TR.2-'Metrication and the Graphic Arts'; 021-000-00089-2; UNIT: 3;DOLC: 05-10-88.Note: All requests for GPO Technical Reports are to be referred tothe GPO, Quality Control and Technical Depprtment, Washington DCGRAPHIC ARTS.
31
183. Hasko, Stephen (National Bureau of Standards, Washington DC,National Measurement Lab). 'Examination of Distance MeasuringDevices* (Final report). United States; Dec. 1980; NTIS PB81-147332; N81 23445. 66p.Note: avail, at RSIC.WEIGHTS AND MEASURES/MOTOR VEHICLES-ODOMETERS/HANDBOOK.
184. Hitchcock, H.H.; Coates, J.F.; Canavan, M.M.; Prillaman,G.H.; Nettles, M.S. (J.F. Coates, Inc., Washington DC). 'TheConsequences of Metric Production for Small Manufacturers. Vol. 2:Case Studies of Large Business-Small Business Interactions'; 1982;AEROSPACE N83-12276; AD-A118634. 284p.Note: avail, at RSIC.MANUFACTURING/MARKETING/BUSINESS-LARGE/BUSINESS-SMALL/INDUSTRY.
185. Hitchcock, Henry H.; Coates, Joseph F. (J.F. Coates, Inc.,Washington DC). 'The Search for Small Businesses with Investmentsin Metric Production' (Phase report). United States; 2 Jun, 1981;NTIS AD-AI07 860/9. 69p.Note: avail, at RSIC.MANUFACTURING/CONSUMERS/MARKETING/COST ANALYSIS/BUSINESS-SMALL.
186. Holtz, R.D. (Purdue University, Lafayette, IN., School ofCivil Engineering). "SI Units in Geotechnical Engineering'; Jun.1980. 7p. also published in ASTM Geotechnical Testing Journal, v 3n 2, p73-79.ENGINEERING-GEOTECHNICAL/ENGINEERING-CIVIL/STANDARDS-UNITS OFMEASUREMENT.
187. Howenstine, E. Jay (Department of Housing and UrbanDevelopment, Washington DC, Office of Policy Development andResearch). *Strategies and Policies for Dealing with High HousingCosts in Industrialized Countries'. United States; Aug. 1981; HUD-0002328.DIMENSIONAL COORDINATION/HOUSING/COST ANALYSIS/LAND/CONSTRUCTION.
188. Hunt, Robert P.; Halstead, Bruce B.; Olshan, Lisa; Cheshire,Jr., Len P. (Science Applications International Corp., McLean,VA). 'The Impact of Metrication on Life Cycle Costs of the LHXWeapon System' (Technical report: Aug. 1986-Feb. 1987); 1987;NTIS AD-A17 415/6/XAB. 84p.Note: avail, at RSIC.LHX/AVIONICS/COST ANALYSIS/ARMY/PROCUREMENT-FEDERAL/WEAPON SYSTEM-LHX.
189. (Newman and Hermanson Co., Washington DC). 'The Impact ofLaws on Metric Conversion: A Survey of Selected Large USCorporations' (Final Report); Feb. 1982; NTIS AD-A118 602/2;AEROSPACE N83-14307. 94p.Note: avail, at RSIC.INDUSTRY/POLICIES AND REGULATIONS/LEGISLATION/BUSINESS-LARGE.
32
190. Jones, Jr., Keith W. (Army Command and General Staff College,Fort Leavenworth, KS). 'Current Trends in .' tric Conversion in theUnited States: Potential Trouble for National Defense' (Researchstudy). United States: Shared Bibliographic Input Experiment; May,1980; NTIS AD-A090 046/4; AEROSPACE N81-11259. 4 5p.Note: avail, at RSIC.DEPARTMENT OF DEFENSE/MILITARY READINESS.
191. Kahles, John F.; Krebs, John L. (Medcut Research Associates,Inc., Cincinnati, OH). *Fourteenth Report of the MachinabilityData Center* (Final report: I Jan, 1978 - 30 Sep, 1980); Jan.1961; AD* A096557; AMMRC TR-81-2. 29p.Note: avail, at RSIC.MACHINE TOOLS/ENGINEERING-MECHANICAL/MANUFACTURING/DESIGN.
192. Kao, Anthony M.; McBurney, S.R. (Construction EngineeringResearch Lab (Army), Champaign, IL). 'Modifications to ArmyFacilities Components System Drawings to Reflect Use of Metric-Sized Lumber'; Sep. 1986; AD* A1273502; CERL-SR-M-86/22. 32p.Note: avail, at RSIC.CONSTRUCTION/ARMY/BUILDING DESIGN.
193. King, Lisa L. (United States Metric Board, Arlington, VA).*Five Years After the Metric Conversion Act, Where Do We Stand?Survey of Large US Manufacturing and Mining Firms (the FortuneMagazine 1000)'; 1980; NTIS AD-A095 116/0; AEROSPACE N81-19351.14p.Note: avail, at RSIC.COMMENTARY/BUSINESS-LARGE/INDUSTRY/MANAGEMENT/MANUFACTURING/POLICIES AND REGULATIONS.
194. King, Lisa L. (King Research, Inc., Rockville, MD). *U.S.Metric Board 1979 Survey of Selected Large U.S. Firms andIndustries' (Final report); 19 May, 1980; NTIS AD-A091 618/9;AEROSPACE N81-14178. 128p.Note: avail, at RSIC.MANUFACTURING/INDUSTRY/MANAGEMENT/POLICIES AND REGULATIONS/BUSINESS-LARGE/COMMENTARY.
195. Lanier, J.L. (Centre Technique des Industries Mcaniques,Senlis (France) CM076324). 'Impulse Pressure Tests for MetricSeals in ISO-Defined Joints" ('Essais aux Impulsions de Pressiond'Une Implantation Metrique pour Raccords ISO*) (Final report).France: National Aeronautics and Space Administration, WashingtonDC; 9 Jan, 1980; CETIM-14-L-16-9.Note: avail, at RSIC.FLUID PRESSURE/SEALS/HYDRAULICS/TECHNOLOGY-FOREIGN.
196. Le Fande, Judith M.; Pokorney, Joseph L. (Middlesex ResearchCenter, Inc., Washington DC). 'Effects of Metric Change on Safetyin the Workplace for Selected Occupations* (Final Report); 21 Apr,1982; AD* A118595. 139p.
Note: avail, at RSIC.INDUSTRY/OCCUPATIONAL SAFETY.
33
197. Lewandoski, E.R. (Bureau of Reclamation, Denver, CO;Engineering and Research Center). 'Metrication at Water and PowerResources Service*; Apr. 1981. 6p.Note: avail, at RSIC in ASCE Proceedings, Technical Councils,v 107 n TCI, p9 5-100 .UTILITIES-WATER/CONSTRUCTION/COST ANALYSIS/ENGINEERING-CIVIL.
198. (Machinability Data Center, Cincinnati, OH). *Machining DataHandbook" vol. 2. 3rd ed.; 1980; AD# A092695. 1133p. MedcutResearch Associates, Inc., 3980 Rossyln Drive, Cincinnati, OH45209.Note: avail, at RSIC.ENGINEERING-MANUFACTURING/HANDBOOK/MACHINE TOOLS.
199. (Machinability Data Center, Cincinnati, OH). 'Machining DataHandbook' vol. 1. 3rd ed.; 1980; AD* A092694. 100 7p. MedcutResearch Associates, Inc., 3980 Rosslyn Drive, Cincinnati, OH45209.Note: avail, at RSIC.MACPINE TOOLS/ENGINEERING-MANUFACTURING/HANDBOOK.
200. Mahaffey, C.T. (National Bureau of Standards, Washington DC).*The Effect of Metrication on Building Codes and Standards* (Finalreport). United States; May, 1980; NTIS PB81-104382. 6p.Note: Published in AIA Metric Building and Construction Guide,Chapter 9, page 85-90, May 1980.CONSTRUCTION/BUILDING CODES/DIMENSIONAL COORDINATION.
201. Mahaffey, Charles T. (Building Economics and RegulatoryTechnology Division). 'International Trends and Developments ofImportance to the Metrication Plans of the U.S. ConstructionCommunity': Government Printing Office; Jun. 1978; C 13.46-976.CONSTRUCTION.
202. (Automated Management Systems, Inc., Lanham, MD). *MassTransit Metrication: A Recommended Policy and Metric ConversionPlan for UMTA" (Final technical report): Urban Mass TransportationAdministration, Washington DC; Jul. 1979; NTIS PB80-125008; UMTA-IT-06-0209-79-1; AEROSPACE N80-21615. 130p.Note: avail, at RSIC.MASS TRANSPORTATION/DEPARTMENT OF TRANSPORTATION.
203. McMahon, J.H. (Federal Communications Commission, WashingtonDC, Research and Standards Division). 'Investigation of Methodsfor Converting the FCC Ground Wave Field Intensity Curves to theMetric System'; 1979; AEROSPACE N79-24250; PB-290930/7;FCC/OCE/RS-79/01. 41p.Note: avail, at RSIC.RADIO WAVES/FCC.
204. Metric Conversion Card; 1984; 4 x 3' (10.2 x 7.6 cm).Note- Commerce Dept., National Bureau of Standards; S/N 003-003-0106e-5, UNIT: 2, DOLC: 06-02-89; NBS-SP-365.CONVERSION CARD.
34
205. (United States Metric Board, Arlington, VA). 'MetricConversion in the United States' (Summary report); 1982; AEROSPACEN82-33568. 45p.Note: avail, at RSIC.CONSUMERS/EDUCATION-GENERAL/INDUSTRY.
206. (J.J. Henry Co., Inc., Arlington, VA). 'Metric ConversionStudy for the Maritime Administration' (Final report): MaritimeAdministration, Washington DC, Office of Ship Construction; 14Jun, 1977; NTIS PB-271 096/0; MA-SC-723-77116. 56p.SHIPYARDS/POLICIES AND REGULATIONS/MARITIME ADMINISTRATION.
207. (United States Metric Board, Arlington, VA). 'Metric UsageStudy: A Look at Six Case Histories' (Final report); 1982; AD*A118601. 32p.Note: avail, at RSIC.MANUFACTURING/MARKETING/BUSINESS-LARGE.
208. (National Technical Information Service, Springfield, VA).'Metrication in the United States, 1964 - June, 1982" (Citationsfrom the NTIS Data Base);Jul. 1982; NTIS PB82-810425. 239p.BIBLIOGRAPHY/CONSUMERS/ECONOMIC IMPACT/COST ANALYSIS!INDUSTRY/MANAGEMENT.
209. (National Technical Information Service, Springfield, VA).'Metrication in the United States, 1970-May 1989 (citations fromthe NTIS Database); Jun. 1989; NTIS PBB9-864003/XAB. 171p.BIBLIOGRAPHY/MACHINE TOOLS/CONSUMERS/EDUCATION-GENERAL/COSTANALYSIS/CONSTRUCTION/POLICIES AND REGULATIONS/PACKAGING.
210. Milton, H.J. (National Bureau of Standards, Washington DC).'Guidelines for Metric Training and the Transitional Period'(Final report); May, 1980; NTIS PB81-104408. 10p.Note: Published in AIA Metric BuildIng and Construction Guide,Chapter 10, page 91-100, May 1980.CONSTRUCTION/BUILDING/EDUCATION-GENERAL.
211. Milton, H.J. (National Bureau of Standards, Washington DC).*Metrication - Take the Tide at Its Flood' (Final report); 1977;NTIS PB-271 168/7. 5p.Note: Published in Concrete Construction, v 22 n 8, p429-431, 440-442, Aug. 1977.CONSTRUCTION/COST ANALYSIS.
- 212. Milton, H.J. (National Bureau of Standards, Washington DC).*Metrication - A Concrete Opportunity" (Final report); Nov. 1977;NTIS PB-280 597/6. 9p.Note: Published in the Journal of the American Concrete Institute,n 11, page N13-N21, Nov. 1977.CONSTRUCTION/COST ANALYSIS.
35
213. Milton, H.J. (National Bureau of Standards, Washington DC,Institute for Applied Technology). 'Recommended Practice for theUse of Metric (SI) Units in Building Design and Construction'(Interim report); 1977; NTIS PB-265 803/7; NBS-TN-938; AEROSPACEN77-28339. 51p.Note: avail, at RSIC.CONSTRUCTION/GUIDELINES/BUILDING DESIGN.
214. Milton, H.J. (National Bureau of Standards, Washington DC,Center for Building Technology). 'The Selection of PreferredMetric Values for Design and Construction' (Final report); Dec.1978; NTIS PB-289 781/7; AEROSPACE N79-20289; NBS-TN-990. 8 6p.Note: avail, at RSIC.BUILDING DESIGN/CONSTRUCTION.
215. Milton, Hans J. (National Bureau of Standards, Washington DC,Center for Building Technology). 'Metrication in Building Design,Production, and Construction. A Compendium of 10 Papers' (Finalreport) Sep. 1978: NTIS PB-285 534/4; NBS-SP-530; LC78-600086;AEROSPACE N79-13209. 199p.Note: avail, at RSIC.CONSTRUCTION/BUILDING CODES/BUILDING DESIGN/GRAPHIC ARTS.
216. Milton, Hans J. (National Bureau of Standards, WashingtonDC). *Cur Metric Future. An Analysis of Metrication's Impact UponConstruction Specification* (Final report); Feb. 1979; NTIS PB-295142/4. 12p.Note: Published in Construction Specifier, v 32 n 2, page 38-47,Feb. 1979.CONSTRUCTION/GUIDELINES.
217. Milton, Hans J. (National Bureau of Standards, Washington DC,Center for Building Technology). 'The Selection of PreferredMetric Value5 for Design and Construction' (Final report): NavalFacilities Engineering Command, Alexandria, VA; Dec. 1978; NBS-TN-990; N79 20289.Note: avail, at RSIC.CONSTRUCTlON/BUILDING/BUILDING DESIGN/NAVY.
218. Milton, Hans J.; Berry, Sandra A. (National Bureau ofStandards, Washington DC, National Engineering Lab). *MetricConversion in the Construction Industries - Technical Issues andStatus* (Final report); Oct. 1980; NTIS PB81-111908; NBS-SP-598;N81 19358. 150p.Note: avail, at RSIC.CONSTRUCTION/BUILDING CODES/BIBLIOGRAPHY.
219. (National Aero;,autics and Space Administration, WashingtonDC). 'NASA Education Briefs for the Classroom. Metrics in Space';]982; NTIS N83-13302/5; NASA-EB-82-2; AEROSPACE N83-13302. 3p.Note: avail, at RSIC.EDUCATION-GENERAL/ASTRONOMY/AEROSPACE.
36
220. Odom, Jeffrey V. (National Bureau of Standards, WashingtonDC). *Weights and Measures Play Vital Roles in Metrication' (Finalreport) ed.; 1977; NTIS PB-271 170/3. 3p.Note: Published in Metric News, v 4 n 3, 5, 11, 29 n.p.May/June 1977.EDUCATION-GENERAL/WEIGHTS AND MEASURES/MANAGEMENT/POLICIES AND REGULATIONS.
221. Committee on Science and Technology: U.S. House ofRepresentatives). 'Oversight Hearing: United States Metric Board'.Washington DC: GPO; 1979; GPO-56-236; AEROSPACE N81-12284. 140p.Note: Hearing before the Subcommittee on Science, Research, andTechnology of the Committee on Science and Technology, 96thCongress, Ist Session, No. 83, 26 Nov, 1979.POLICIES AND REGULATIONS/PROGRESS IN METRICATION.
222. Pearson, J.W. (California University, Livermore; LawrenceLivermore Lab). *Metrication, Engineering Standards and the SISystem': Department of Energy; Nov. 1977; NTIS UCID-17694. 74p.ENGINEERING/STANDARDS/DEPARTMENT OF ENERGY/INTERNATIONAL TRADE.
223. Peiser, H. Steffen (National Bureau of Standards, WashingtonDC, Office of International Relations). 'Consultation Visit to theHonduras Department of Engineering and Standardization* (Finalreport): Agency for International Development, Washington DC; Feb.1980; NTIS PBBO-162134; NBS IR-80-1969. 55p.HONDURAS-METRICATION/GOVERNMENT-FEDERAL/INDUSTRY.
224. (United States Metric Board, Arlington, VA). 'Perspectives onFuture Metric Conversion. The View of Principal Metric ConversionPlanning and Coordinating Organizations': USMB; Jul. 1982;AEROSPACE N83-28282; NTIS PB85-151462/XAB. 43p.Note: See also PB85-151470; avail, at RSIC.COST ANALYSIS/CONSUMERS/EDUCATION-GENERAL.
225. Peter, F.E. (Naval Avionics Center, Indianapolis, IN). 'DataWord Standardization'; 1982; AEROSPACE N84-31147; AD-P003543.Note: In ASD Proceedings Papers of the Second AFSC AvionicsStandardization Conference, v 1, p327-336 (See N84-31121 21-06);avail, at RSIC.HANDBOOK/STANDARDIZATION/NAVY/AVIONICS.
226. (94th Congress, H.R. 8674; Amendment - 100th Congress, H.R.4848). 'Public Law 94-168: Metric Conversion Act of 1975; amendedby Public Law 100-418"; 23 Dec, 1975 (Amendment - 23 Aug, 1988).Note: avail, at RSIC.LEGISLATION-FEDERAL.
227. (International Brothernood of Electrical Workers, WashingtonDC). 'Realities of Metrication: A Report'; 1977; AEROSPACE N77-25355; LC-77-74711. 39p.Note: avail, at RSIC.POLICIES AND RtTTLATO1Jq/ECONOMIC IMPACT/INTERNATIONAL TRADE.
37
228. (General Accounting Office, Washington DC, Community andEconomic Development Division). 'Redesigning Shipping Containersto Reduce Food Costs' (Report to the Congress); 28 Apr, 1978; NTISPB-280 317/9; CED-78-81. 89p.DEPARTMENT OF AGRICULTURE/PACKAGING/COST ANALYSIS.
229. (United States Metric Board, Arlington, VA). 'ResearchOverview and Analysis'; Apr. 1982; AD* A118594. 131p.Note: avail at RSIC.COST ANALYSIS/COMMERCE/INDUSTRY.
230. Simpson, James A.; Barsby, Steve L. (Applied Concepts Corp.,Reston, VA). 'A Study of Metric Conversion of Distilled SpiritsContainers: A Policy and Planning Evaluation' (Final report); 28Oct, 1931; NTIS AD-AI15 644/7; AEROSPACE N82-32550. 45p.Note: avail, at RSIC.PACKAGING/COST ANALYSIS/ECONOMIC IMPACT/CONSUMERS.
231. Simpson, James A.; Barsby, Steve L. (Applied Concepts Corp.,Reston, VA). 'Survey of Consumer Attitudes and Awareness of theMetric Conversion of Distilled Spirits Containers' (Researchreport); I Dec, 1981; NTIS AD-A116 049/8; AERO N82-32551. 52p.Note: avail, at RSIC.PACKAGING/PSYCHOLOGY/INDUSTRY/CONSUMERS.
232. Committee on Science and Technology: U.S. House ofRepresentatives). 'Status of Metric Conversion in the US andOversight of US Metric Board'. Washington DC: GPO; 1983; AEROSPACEN83-19948. 303p.Note: avail, at "ISIC.CONSUMERS/EDUCATION-GENERAI/INDUSTRY/INTERNATIONAL TRADE.
233. (Middlesex Research Center, Inc., Washington DC). 'A Study ofMetric Measurement and Legislation', Vol. 2 (Final report): UnitedStates Metric Board; 1979; AEROSPACE N81-11256. 203p.Note: avai. at RSIC.LEGISLATION-FEDERAL/LEGISLATiON-STATE/POLICIES AND REGULATIONS.
234. (Middlesex Research Center, Inc., Washington DC). 'A Study ofMetric Measurement and Legislation', Vol. I (Final report): UnitedStates Metric Board; 1979; AEROSPACE N81-11255. 166 p.Note: avail. at RSTC.CANADA-METRICATION/AUSTRALIA-METRICATION/LEGISLATION-FEDERALiLEGISLATION-STATE/POLICIES AND REGULATIONS.
235. Sulzer, Richard (Federal Aviation Administration, TechnicalCenter, Atlantic City, NJ). 'Transport Aircraft CockpitStandardization: Federal Aviation Regulations Part 25' tFinalreport); Nov. 1981; AD# A108924; FAA-CT-80-54; FAA-EM 81-11. 42p.Note: avail, at RSIC.POLICIES AND REGULATIONS/FAA/AVIONICS.
38
236. Swindells, B. (National Physical Lab., Teddington, England;Division of Mechanical and Optical Metrology). *Mass Force andWeight* (units of measurement); 1979; AEROSPACE N86-17304; NPL-MOM-38. 18p.Note: avail, at RSIC.WEIGHTS AND MEASURES.
237. Taft, William H., Deputy Secretary of Defense *DoD Directive4120.18": Washington DC; 16 Sep, 1987. 4p.Note: avail, at RSIC.DEPARTMENT OF DEFENSE/POLICIES AND REGULATIONS.
238. Tascher, John M. (United States Metric Board, Arlington, VA)."Status and Outlook of Metric Conversion of Standards: The Viewsof Nine Selected Major Standards Development Bodies'; May, 1982;AD* A123096. 73p.Note: avail, at RSIC.STANDARDS/POLICIES AND REGULATIONS/ENGINEERING-MECHANICAL/MANUFACTURING/ENGINEERING/PROGRESS IN METRICATION.
239. Tascher, John M. (National Bureau of Standards, WashingtonDC, Institute for Applied Technology). *A Survey of the NationalMetric Speakers Bureau*; Nov. 1977; NTIS PB-273 591/8; NBS-TN-960;AEROSPACE N78-17243. 60p.Note: avail, at RSIC.EDUCATION-GENERAL/SPEAKERS.
240. Tascher, John M.; Blades, Sharon L. (U.S. Metric Board,Arlington, VA). 'Status of Metric Conversion: A Survey of U.S.Standards Writing Organizations*; May, 1982; AD* A123241. 121p.Note: avail, at RSIC.STANDARDS/PROGRESS IN METRICATION.
241. Taylor, B.N. (National Institute of Standards andTechnology). 'New Internationally Adopted Reference Standards ofVoltage and Resistance: Special Report on Electrical Standards*.Gaithersburg, MD; 1989; PB89-184097/XAB. 9p.Note: available from Supt. of Docs. as SN703-027-00027-0; includedin Journal of Research of the National Institute of Standards andTechnology, v 94 n 2, p95-103.ELECTRICITY/STANDARDS-UNITS OF MEASUREMENT.
242. (U.S. Metric Board, Arlington, VA). 'United States MetricBoard: Summary Report, July 1982"; Jul. 1982; NTIS PB85-151454/XAB; N85 71707. 47p.Note: avail, at RSIC.POLICIES AND REGULATIONS/GOVERNMENT-FEDERAL/INDUSTRY/ENGINEERING-MECHANICAL.
243. (Sterling Systems, Inc., Rockville, MD). *US Department ofEnergy (DOE) Guidelines for the Development of Metrication ProgramPlans'; 1984; NTIS DE84 4013275/XAB; DOE/EV/10662-T. 51p.GUIDELINES/DEPARTMENT OF ENERGY.
39
244. Vlannes, P.N. (National Aeronautics and Space Administration,Washington DC). "NASA Metrication Activities'. Dearborn, MI:
Society of Manufacturing Engineers; 1978; NTIS N78 27293/7; NASA-TM-79522; IQ78-199; AEROSPACE N78-27293. 9p.Note: Presented at WESTEC '78 Conference, Los Angeles, CA, Mar.1978; avail, at RSIC.AEROSPACE/POLICIES AND REGULATIONS/NASA.
245. Webber, Steve (National Bureau of Standards, Washington DC,National Engineering Lab). *Building Technology Publications.Supplement 5: 1980" (Final report); Jun. 1981; NBS-SP-457-5; NTISPB81-239618. 97p.Note: See also PB-261216; LC78-323849.BUILDING/CONSTRUCTION/BIBLIOGRAPHY/BUILDING CODES/CONSUMERS/ENGINEERING-ENVIRONMENTAL/COST ANALYSIS.
246. Whelihan, A.S.; Ellsworth, H.B. (Department of Commerce,Washington DC, Office of Metric Programs). 'Federal Metric Report,1985". Washington DC: Interagency Committee on Metric Policy;1986; NTIS PB87-175360/XAB. 59p.POLICIES AND REGULATIONS/PROGRESS IN METRICATION.
247. Yulo, Carlo (Federal Aviation Administration Washington DC,Systems Research and Development Service). 'An Overview of FAAActivities in Civil Aviation Metrication' (Final report); Aug.1977; NTIS AD-A043 473/8; FAA/RD-77/95; AEROSPACE N78-11259. 18p.Note: avail, at RSIC.AVIONICS/COST ANALYSIS/GOVERNMENT-FEDERAL/POLICIES ANDREGULATIONS/FAA.
40
SUBJECT INDEX - DOCUUNTS/RZPORTS
AEROS-AC7 : 219,244
AIR '>A'r" CONTROL: 179
ALT7MF7ERS: 179
ANTITRU7T: 153
AY , " 16b,167,188,192
AsT:4< NDM: 219
AU L I. A-'ETR CAT I ON: 234
AVION .' ' : .79,183,225,235,247
BIB A'Y: 168,208,209,218,245
9T,T.; A B1@,217,245
BU'> '1( CDES: 200,215,218,245
BUIid DESIG: 192,213,214,215,217
-LARGE : 184,189,193,194,207
B3'S'NESS -SMALL: 177,184,185
CANADA-METR.CATION: 164,234
'.MMENTARY: 193, 194
?CMMTCF: :6'.177,229
cON2 7Y u c'r:'N: 165, 168,175,177,187,192,197,200, 201,209,210,21121:,213,214,215,216,217,218,245
CO'NSUM RS 13'.85,205,208,209,224,230,231,232,245
CONVERSION CARD: 204
COST ANALYSIS: 168,172,178,180,185,187,188,197,208,209,211212,224,228,229,230,245,247
DEPARTMENT OF AGRICULTURE: 228
.?i ARTMENT OF DEFENSE: 174,190,237
DEF A7,T,7iEN' OF ENERGY: 171,172,222,243
41
DEPARTMENT OF TRANSPORTATION: 202
DESIGN: 191
DIMENSIONAL COORDINATION: 168,187,200
ECONOMIC IMPACT: 167,168,170,178,180,208,227,230
EDUCATION-GENERAL: 178,205,209,210,219,220,224,232,239
E.LECTRICITY: 175,241
ENGINEERING: 222,238
ENGINEERING-BIOMEDICAL: 181
ENGINEERING-CIVIL: 164,186,197
ENGINEERING-ENVIRONMENTAL: 245
ENGINEERING-GEOTECHNICAL: 164,186
ENGINEERING-MANUFACTURING: 198,199
ENGINEERING-MECHANICAL: 191,238,242
FAA: 179,235,247
FCC: 203
FLUID PRESSURE: 195
GOVERNMENT-FEDERAL: 176,223,242,247
GRAPHIC ARTS: 182,215
GUIDELINES: 213,216,243
HANDBOOK: 163,168,183,198,199,225
HONDURAS-METRICATION: 223
HOUSING: 187
HYDRAULICS: 195
INDUSTRY: 163,165,175,180,184,189,193,194,196,205,208,223,229231,232,242
INTERNATIONAL TRADE: 166,173,222,227,232
LAND: 187
LEGISLATION: 189
42
LEGISLATION-FEDERAL: 163,166,170,174,226,233,234
LEGISLATION-STATE: 233,234
LHX: 188
MACHINE TOOLS: 173,191,198,199,209
MANAGEMENT: 165,166,167,178,193,194,208,220
MANUFACTURING: 173,177,184,185,191,193,194,207,238
MARITIME ADMINISTRATION: 206
MARYETING: 173,184,185,207
MASS TRANSPORTATION: 202
MEDICINE: 181
MILITARY READINESS: 190
MOTOR VEHICLE: 175
MOTOR VEHICLES-ODOMETERS: 183
NASA: 244
NAVY: 217,225
OCCUPATIONAL SAFETY: 175,196
PACKAGING: 175,209,228,230,231
PETROLEUM: 170
POLICIES AND REGULATIONS: 166,169,170,174,176,189,193,194,206209,220,221,227,233,234.235,237,238,242,244,246,247
PROCUREMENT-FEDERAL: 169,188
PROGRESS IN METRICATION: 174,221,238,240,246
PSYCHOLOGY: 231
RADIO WAVES: 203
SEALS: 195
SHIPYARDS- 206
SPEAKERS: 239
STANDARDIZATION: 165,225
43
STANDARDS: 166,181,222,238,240
STANDARDS-UNITS OF MEASUREMENT: 184,186,241
TECHNOLOGY-FOREIGN: 195
UTILITIES-WATER: 197
WEAPON SYSTEM-LHX: 188
WEAPONS-NUCLEAR: 171
WEIGHTS AND MEASURES: 183,220,236
44
PERIODICALS/SERIALS
248. Antoine, Valerie. "Implementing the Metric System by 1992 -How Will Your Company Be Affected9". Metrication News: IndustryStandards Quarterly; First Quarter 1989.Note: avail, at RSIC.PROGRESS IN METRICATION.
249. Antoine, Valerie. 'When You Use Metrics Be Sure They AreCorrect'. Packagins; May 1986: p60.Note: avail, at RSIC.PACKAGING/STANDARDS-UNITS OF MEASUREMENT.
250. Astrop, A. 'Metrication-Time to Recall the Benefits'.Machinery and Production Engineering; 28 Jun, 1978; v 132 n 3417:p30 -3 1.Note: avail, at RSIC.COMMENTARY.
251. Atkey, M. 'Getting the Measure of Metrication' (in the UK).Machinery and Production Engineering; 29 Nov, 1978; v 133 n 3439:p25-27.Note: avail, at RSIC.UNITED KINGDOM-METRICATION.
252. Atkinson, W. 'A Guide To Changes in Petroleum Revenue Tax'.Accountancy; Mar. 1981; v 92 n 1051: p9 1 ,9 3-9 4 .UNITED KINGDOM-METRICATION/LEGISLATION/PETROLEUM/ACCOUNTING.
253. Baas8, K.G. (Ecole Polytechnique de Montreal, Dept. of CivilEngineering, Montreal, Quebec, Canada). 'Use of Clothoid Templatesin Highway Design'. Transportation Forum; Dec. 1984; v 1 n 3:p47-52.Note: EI8510090598; EI85053249.ENGINEERING-CIVIL/HIGHWAYS.
254. Beckman, W.A.; Duffie, J.A.; Bugler, J.W.; Cooper, P.I.;Dunkle, R.V.; Glaser, P.E.; Horigome, T.; Lawand, T.A.; Howe,E.D.; Van der Mersch, P.L. 'Units and Symbols in Solar Energy'.Solar Energy; 1978; v 21 n 1: p6 5-68.Note: AEROSPACE A78-45743; avail, at RSIC.SOLAR TECHNOLOGY/STANDARDS-UNITS OF MEASUREMENT.
255. Buchanan, J. 'Metric Conversion: An Exercise in CooperationBetween Government and Industry'. Optimum; 1976; v 7 n 93: p34-41.CANADA-METRICATION/COST ANALYSIS/COMMENTARY.
256. Bureau, William H. 'Paper: Standards-Basis Weight'. GraphicArts Monthly; Information Access Company, Tech. Pub. Co.; Feb.1985.GRAPHIC ARTS.
45
257. Butler, F. 'Imperial/Metric Translation Gearing' (for cuttingmetric threads on machines with Imperial leadscrews). Machineryand Production Engineering (GB); 3 Aug, 1977; v 131 n 3372: p92-3.Note: avail, at RSIC.UNITED KINGDOM-METRICATION/GEARING.
258. Campbell, J.M.; Campbell, R.A. (Petrotech Consult. Inc).'Application of the SI Metric System: Part 1 - The Basic System'.Journal of Petroleum Technology; 1985; v 37 n 9: p14 15-14 19 .Note: avail, at RSIC.STANDARDS/PETROLEUM.
259. 'Canada Studies Metric Conversion" Management World; Nov.1979; v 8 n 11: p4.Note: avail, at RSIC.CANADA-METRICATION/PSYCHOLOGY.
260. Carlson, G.F. (Tech. Services, ITT Fluid Handling Div.,Skokie, IL). *Liquid Viscosity Effects on Pumping Systems'(procedures and charts for determining changes in head caused byviscous liquids in 12 different circumstances). Heating-Piping-AirConditioning; July 1979; v 51 n 7: p81-87.Note: avail, at RSIC.FLUID MECHANICS/AIR CONDITIONING/HEATING/ENGINEERING-MECHANICAL.
261. Caspe, Marc S.; Scianna, Nicola (Int Eng Co, San Francisco,CA). *Problems of 'Dual Dimensioning''. Consulting Engineer(Barrington, IL); Jun. 1977; v 48 n 6: p91-93; ISSN: 0010-7107.Note: avail, at RSIC.GUIDELINES/MANUFACTURING/INTERNATIONAL TRADE.
262. Chalabi, A. Fattah; Vanzler, Frank (Worcester Polytech Inst,MA). *Construction Industries and Metrication'. American Societyof Civil Engineers, Journal of the Construction Division; Mar.1982; v 108 n COl: p159-174; ISSN: 0569-7948.Note: E18206048141; EI82020878; avail, at RSIC.CONSTRUCTION/MANAGEMENT/ENGINEERING-CIVIL/COMMENTARY.
263. Ciotti, Francine A. *Learning the Lore of Landed Costs'.Distribution; Chilton Pub. Co., Radnor, PA; Sep. 1988: Export-Import Business.Note: avail, at RSIC.INTERNATIONAL TRADE/BUSINESS.
264. Coad, W.J. *Standards: 1. The Cornerstone of Commerce'.Heating-Piping-Air Conditioning; Jul. 1978; v 50 n 7: p83,101.Note: avail, at RSIC.STANDARDS/COMMERCE/HEATING/AIR CONDITIONING.
46
265. Conley, John E. (GE, Bridgeport, CN). *Selection of StandardSizes for Metallic Electrical Conductors for Insulated Wire andCables'. IEEE Transactions on Power Apparatus and Systems; Nov.-Dec. 1978; v PAS-97 n 6:p2127-2133; ISSN: 0018-9510.Note: avail, at RSIC.ELECTRICITY/STANDARDS.
266. Corbett, J.V. (University of San Francisco, School ofNursing, San Francisco, CA 94117). *Conversion to SI Units'.Nursing Research; 1989; v 38 n 3: p1 61 .MEDICINE/STANDARDS-UNITS OF MEASUREMENT.
267. Cunningham, B. 'Realities of Metrication - InternationalBrotherhood of Electrical Workers'. AFL-CIO AmericanFederationist; 1977; v 84 n 4: p2 3-24 .ELECTRICITY.
268. Curtis, Bruce. *Made in Oklahoma: Local Trade OfficialExplains How to Enter the Export Market'. Tulsa BusinessChronicle; World Publishing Co., UMI/Data Courier (BusinessDateline); 29 Jun, 1987; v 6 n 26: Sec. 1, pg.INTERNATIONAL TRADE.
269. Dann, Dick. 'Power Transmission in the 80's: The Componentsof Success'. Power Transmission Design; Jan. 1980; v 22 n 1: p9 6 -102; ISSN: 0032-6070.Note: E18006047133; EI80068595; avail, at RSIC.MOTORS/ENGINEERING-MECHANICAL.
270. "Datasheet: Converting to Metric Bolting'. Metal Progress;May 1979; v 115 n 5: p8 2-83 .Note: avail, at RSIC.FASTENERS/STANDARDS.
271. De Ferrari, J. 'The Metric System Is ...Er ...Inching Forward'.Nation's Business; Sep. 1982; v 70 n 9: p76 .CONSUMERS/COMMENTARY.
272. Diamant, R.M.E. 'Condensation in Buildings, Part 3: MoistureDiffusion'. Heating & Air Conditioning Journal; Apr. 1979; v 49 n567: p2 4-28 .Note: avail, at RSIC.HEATING/AIR CONDITIONING/CONSTRUCTION.
273. Dienelt, H.; Farrington, F. 'Adoption of the SI Units' (ingas supply industry). Gas Warme International; Sep. 1978; v 27 n9: p5 0 2-5 0 7 .INDUSTRY-GAS/STANDARDS-UNITS OF MEASUREMENT.
47
274. *Digital Dial Puts on Good Display* (machine tools and metricconversion). Metalworking Production; Oct. 1977; v 121 n 10:p104-105.Note: avail, at RSIC.MACHINE TOOLS.
275. *Eastern Standard'. Aviation Week and Space Technology;McGraw-Hill, Inc. (Washington Roundup); 5 Nov, 1979: p15.Note: avail, at RSIC.AVIONICS.
276. Eldin, Hamed K.; Chesson, Jr., Eugene (Oklahoma State Univ,Stillwater). 'Progress Toward Metric Conversion in EngineeringEducation'. Engineering Education; Dec. 1982; v 73 n 3: p244-247;ISSN: 0022-0809.Note: E18302010032; EI83032983; avail, at RSIC.EDUCATION-ENGINEERING.
277. Etoe, 0. 'Metrication Must Keep Moving'. Marketing; Jun.1976: p21 .MARKETING/CONSUMERS/COMMENTARY.
278. Ettkin, L.P.; Thorne, B.J,; Keaton, P.N. 'Metric Conversion:Where We Are and Where We're Going'. SAM Advanced ManagementJournal; Spring 1980; v 45 n 2: p31-38.Note: avail, at RSIC.COMMENTARY/INDUSTRY.
279. 'Every Foundryman's Guide to SI Units'. Foundry Trade Journal(GB); 23 Jun, 1977; v 142, n 3114: p1571-2, 1575.FOUNDRY PRACTICE/HANDBOOK.
280. 'Everything From Test Machines to Pens Now Comes in MetricDimensions'. Product Engineering, New York; Jun. 1977; v 48 n 6:p4 4-6 .Note: avail, at RSIC.MANUFACTURING.
281. (National Bureau of Standards, Washington DC). 'Exploding aMetric Myth; Metric Speakers Are kjailable'. Dinensions/NBS; 1978;v 62 n 3: 33p.Note: AEROSPACE N78-27996; PB-279050/9; NBS-DIM-62-3;avail, at RSIC.SPEAKERS/COMMENTARY.
282. Field, Bradley G. (Smith, Hinchman & Grylls Assoc. Inc,Detroit, MI). *No Matter What Your Measure -- The Cost Will BeHigh'. Consulting Engineer (Barrington, IL); Jun. 1977; v 48 n 6:p82-85; ISSN: 0010-7107.Note: E17708058721; E177053157; avail, at RSIC.COST ANALYSIS/COMMENTARY/UNITED KINGDOM-METRICATION/CANADA-METRICATION/AUSTRALIA-METRICATION.
48
283. Fischer III, C.F. *Why Convert to Metric". Industry Week;Penton/IPC (Letters); 21 Nov, 1988: p6 6 .Note: avail, at RSIC.COMMENTARY.
284. Fong, Diana. 'Make Mine Metric'. Forbes; (Government); 26Jun, 1989: p106.COMMENTARY/PROGRESS IN METRICATION.
285. Frankel, G.J. (Grumman Aerospace Corp., Bethpage, NY).*Aerospace Metrication - A Progress Report'. Astronautics andAeronautics; Sep. 1978; v 16: p6 8 ,6 9 .Note: AEROSPACE A78-49165; avail, at RSIC.AEROSPACE/STANDARDIZATION/MARKETING.
286. Frankel, George J. *Aerospace Metrication Inches Along'.Aerospace America; American Institute of Aeronautics andAstronautics, Inc. (AIAA Bulletin, AIAA News); Dec. 1984: pB4.Note: avail, at RSIC.AEROSPACE/PROGRESS IN METRICATION.
287. Fricke, Thomas E. 'Water Utility Goes Metric'. Water & SewageWorks; Feb. 1977; v 123 n 2: p50-51; ISSN: 0043-1125.Note: E17709070448; E177091756.UTILITIES-WATER.
288. 'Going Metric: Country is Miles from Conversion'. New EnglandBusiness; 5 Apr, 1982; v 4 n 6: p23-24.COST ANALYSIS/EDUCATION-GENERAL/COMMENTARY.
289. Goldman, D.T. (US Dept. of Commerce, Washington DC). 'TheMetric System: Standards and Practice'. IEEE Engineering inMedicine and Biology Magazine (USA); Mar. 1984; v 3 n 1: p3 0-3 3 ;ISSN: 0278-0054.Note: avail, at RSIC.ENGINEERING-BIOMEDICAL/MEDICINE.
290. *Guidelines for Use of the Modernized Metric System'.Dimensions/NBS (USA); Dec. 1979; v 63 n 12: p13-19.Note: avail, at RSIC.GUIDELINES/STANDARDS-UNITS OF MEASUREMENT.
291. Gutmann, Fredrick T. *By the Numbers and Letters'. MechanicalEngineering; The American Society of Mechanical Engineers, (Limitsand Fits); Nov. 1987: p6 8 .Note: avail, at RSIC.ENGINEERING-MECHANICAL.
292. Hart, K.C. 'Metric Conversion Gearing for Lathes and SimilarMachines'. Machinery and Production Engineering (GB); 11 May,1977; v 130 n 3360: p442-6.Note: avail, at RSIC.GEARING/MACHINE TOOLS.
49
293. Hatschek, R.L. 'How Would You Make This Part'* (screw-machine-products manufacturers). American Machinist; Jul. 1978; v122 n 7: p80-81.Note: avail, at RSIC.MANUFACTURING/INDUSTRY/STANDARDS-SCREWS.
294. Hermanson, Roger C.; Stillwagon, Woodrow C. *The ForeignTrade Deficit - Causes and Solutions. (includes related articleon the history of the U.S. trade deficit). Business; Jan.- Mar.1988; v 38: p3(7).INTERNATIONAL TRADE/ANTITRUST/COST ANALYSIS.
295. Hitchings, Bradley, Editor. 'Coping With Metric Conversion".Business Week; McGraw-Hill, Inc. (Personal Business); 20 Jun,1977: p106.Note: avail, at RSIC.BUSINESS.
296. 'How to Handle the Conversion Metrics'. Training; Nov. 1979;v 16 n II: p45-4 8+.EDUCATION-GENERAL/HANDBOOK.
297. "Indexable Cartridges Go Metric and Meet a New ANSIStandard*. Tooling and Production; Sep. 1977; v 43 n 6: p1 10 .Note: avail, at RSIC.MACHINE TOOLS.
298. 'Industry Observer'. Aviation Week and Space Technology;McGraw-Hill, Inc.; 30 Jul, 1979: p9 .Note: avail, at RSIC.INDUSTRY/AVIONICS.
299. 'Inquiries'. Mechanical Engineering; The American Society ofMechanical Engineers (ASME Codes and Standards); May, 1986: p104.Note: avail. at RSIC.ENGINEERING-MECHANICAL.
300. Irving, M. 'Marketers Make a Metric Muddle'. Marketing; Mar.1978: p75-78.UNITED KINGDOM-METRICATION/MARKETING/COMMENTARY.
301. Johnson, Ivan A. (Ivan Johnson, Inc., Arvada, CO).*Metrication and American Society of Civil Engineers'. Journal ofProfessional Issues in Engineering; Apr. 1986; v 112 n 2: p93-106;ISSN: 0733-9380.Note: E18609080917; EI86016839; avail, at RSIC.ENGINEERING-CIVIL.
302. Joshi, M.N. (Process Contr. Div., Honeywell Inc., FortWashington, PA). *Developing a Plan for Metric Conversion'.Machine Design; 1981; v 53 n 24: pI16,11 8 .Note: avail, at RSIC.MANAGEMENT.
50
303. Karim, G.A.; Hamilton, A.B. (Univ. Calgary; Calgary T2N IN4,Alberta, Canada). 'Learning Program for Engineering and ScientificProfessionals in Oil and Gas Industry Concerning Metrication andSI Units'. Mechanical Engineering; 1977; v 99 n 1: p 99.Note: avail, at RSIC.EDUCATION-GENERAL/INDUSTRY-GAS/ENGINEERING-MECHANICAL.
304. Karns, J. (Ohio University, Lancaster, OH). *How to Use UnitAnalysis for the Metrication of Equations and Formulas'.Manufacturing Engineering; Oct. 1977; v 79 n 4: p70-72.Note: avail, at RSIC.MATHEMATICS-GENERAL/ENGINEERING-MANUFACTURING.
305. Keaton, P.N.; Ettkin, L.P. "American Industry Inches(Centimeters) Toward Metric'. Business Horizons; Dec. 1977;v 20 n 6: p59-61.Note: avail, at RSIC.COMMENTARY.
306. Keerdoja, Eileen; Hager, Mary; Whitemore, Jane. *InchingToward a Metric System'. Newsweek; 6 Aug, 1979: p8.Note: avail, at RSIC.PROGRESS IN METRICATION.
307. Koster, Allen T. (Arthur G. McKee & Co., Cleveland, OH). 'HowOne Design Firm Handled Conversion'. Consulting Engineer(Barrington, IL); Jun. 1977; v 48 n 6: p86-90; ISSN: 0010-7107.Note: E17708058722; E177053158; avail, at RSIC.DESIGN/ENGINEERING/GUIDELINES.
308. Kraut, B. (Valvazorjeva 3, Ljubljana, Yugoslavia). "Perigon:SI Unit for Angle?'. Strojinski Vestnik; Sep.- Oct. 1977; v 23 n9-10: pl- 4 .TIME AND ANGULAR MEASURES.
309. Lace, J.H. (Babock P(wver Ltd). 'Mechanical Engineering PlantDesign and Manufacture of the Boilers'. Project Management ForumColloquium on Project Management Lessons Learned from the DraxCompletion Project IEE Colloquium (Digest). Published by IEE,London, England; 1986/2: pl-15.ENGINEERING-MECHANICAL/BOILERS/UNITED KINGDOM-METRICATION.
310. Lewandowski, E.R. (Water and Power Resources Service, Denver,CO). 'Metrication at Water and Power Resources Service'. Journalof the Technical Councils of ASCE: Proceedings of the ASCE; Apr.1981: v 107 n 1: p95-100; ISSN: 0148-9909.Note: E18105045741; E181103098; avail, at RSIC.COST ANALYSIS/MANAGEMENT/ENGINEERING-CIVIL.
51
311. Lewandowski, Edward R. (Water & Power Resources Service,Denver, CO). "Technical Aspects of Metric Constructior". AmericanSociety of Civil Engineers, Journal of the Construction Division;Mar. 1982; v 108 n C01: p39-4 5 ; ISSN: 0569-7948.Note: E18212114479; E182111818; avail, at RSIC.CONSTRUCTION/ENGINEERING-CIVIL.
312. Lightowler, K. (David Brown Gear Industries Ltd.,Huddersfield, England). "Gear Metrication and Gears Without Boxes'(Santasalo modular iron gear wheels). EMD - Engineering Materialsand Design; Jan. 1979; v 23 n 1: p3 2 -3 6 .Note: avail, at RSIC.GEARING/UNITED KINGDOM-METRICATION/INTERNATIONAL TRADE.
313. Liss, R.B.; Johnson, A.B. (Caterpillar Tractor Co., TechnicalCenter, Bldg. A, 100 N.E. Adams St., Peoria, IL 61629). "SteelMetrication at Caterpillar'. Metal Progress; May, 1979; v 115 n 5:p62-65.Note: avail, at RSIC.MANUFACTURING.
314. Lowndes, Jay C. "Cost Boosts Stall Metric Plan for MX".Aviation Week and Space Technology; McGraw-Hill, Inc.(Management); 7 Apr, 1980: p54.Note: avail, at RSIC.ARMY/AVIONICS/WEAPON SYSTEM-MX.
315. MacFarlane, S. "What to Know About Metric Conversion in theEDP Field". Canadian Datasystems (Canada); Aug. 1980; v 12 n 8:p36 -3 7 .CANADA-METRICATION/MANAGEMENT.
316. Mair, A.C. (GM Corp, Center for Technology, Detroit, MI48202). "Metrication Improves Balance of Trade'. ExperimentalMechanics; 1980; v 20 n 12: p3.Note: avail, at RSIC.INTERNATIONAL TRADE.
317. Marcelli, R.J. "The Metric Miseries: Fact or Fiction?". StateGovernment; Winter 1978; v 51 n 1: p28-33.COST ANALYSIS/LEGISLATION.
318. Matthews, M.L. (University of Guelph, Dept. of Psychology,Guelph NiG 2WI, Ontario, Canada). "Metrication of Road Signs andDriver Behavior'. Journal of Applied Psychology; 1978; v 63 n 5:p662-665.Note: avail, at RSIC.CANADA-METRICATION/MOTOR VEHICLE/PSYCHOLOGY.
52
319. Matthews, Michael L. (University of Guelph, Ontario). *Impactof Highway Metrication on Traffic Accidents and Long-term Trendsin Vehicle Speeds for Roads with Resultant Increased SpeedLimits'. Human Factors; Aug. 1979; v 21 n 4: p503-507;ISSN: 0018-7208.Note: E18002012765; E180042036; avail, at RSIC.CANADA-METRICATION/MOTOR VEHICLE/PSYCHOLOGY.
320. Messer, T. 'Metric Conversion: Where We Stand Today inCanada'. Materials Management & Distribution; Mar. 1978; v 23 n 3:p3 4 .CANADA-METRICATION.
321. 'Metric Conversion Chart' (standard gauges: inch and metric(SI) equivalents). Welding Design & Fabrication; Nov 1978; v 51n 11: p100.Note: avail, at RSIC.WELDING.
322. (National Bureau of Standards, Washington DC). "MetricConversion Guidelines for the Building Community'. Dimensions/NBS;Sep. 1977; v 61 n 9.Note: NTIS PB-273 107/3; avail, at RSIC.GUIDELINES/BUILDING.
323. 'Metric Fasteners' (Survey of Present Position HighlightsProblems Facing Fastener Industry). Engineering Materials andDesign (GB); May 1977; v 21 n 5: p71 -2.Note: avail, at RSIC.FASTENERS.
324. 'Metric Standards: Trends and Developments' (in the US).Product Engineering; May 1978; v 49 n 5: p5O- 52.Note: avail, at RSIC.STANDARDS/MANUFACTURING.
325. "Metric Transition: Help for U.S. Exporters'. BusinessAmerica; Information Access Company; 26 Sep, 1988; CODEN: U.S.Department of Commerce.Note: avail, at RSIC.INTERNATIONAL TRADE/BUSINESS.
326. *Metrication - An Investigation into the Present State.Production Engineer; Dec. 1977; v 56 n 12: p24-26.Note: avail, at RSIC.MANUFACTURING.
327. (National Bureau oi Standards, Washington DC). 'MetricationAustralian Style'. Dimensions; Jun. 1977; v 61 n 6.Note: NTIS PB-270 279/3; avail, at RSIC.AUSTRALIA-METRICATION.
53
328. 'Metrication Costs Exceed Original Estimate' . Aviation Weekand Space Technology; McGraw-Hill, Inc. (Management); 25 Feb,1980; p55.Note: avail, at RSIC.AV:ONICS/COST ANALYSIS.
329. 'Metrication, Imperial Folly*. The Economist; United Kingdom(Business, Economics and Science); 17 Nov. 1979: p1ll.UNITED KINGDOM-METRICATION.
330. 'Metrication- Have You Figured It Out"' (Switching to Metricsin Manufacturing Industries). Machinery and ProductionEngineering; 28 Mar, 1979; v 134 n 3455: p2 6-28 .Note: avail, at RSIC.MANUFACTURING/INDUSTRY/STANDARDS-UNITS OF MEASUREMENT.
331. "Metrication: Preferred Terms". World Pumps; 1982; n 3: p14 6 ;ISSN: 0262-1762.Note: avail, at RSTC.PUMPS.
332. "Met-ication; Lb Foolish'. The Economist; United Kingdom(Business); 20 May, 1978: p1 21 .BUSINESS/UNITED KINGDOM-METRICATION.
333. "Metrication, The Final Furlong?'. The Economist; UnitedKingdom; 22 Apr, 1978.BUSINESS/UNITED KINGDOM-METRICATION.
334. Michaud, P. 'Federal Legal Metrology in Canada: Past, Presentand Future'. Optimum; 1977; v 8 n 2: p31 -3 6 .CANADA-N ETRICATION/MARKETING.
335. Miller, William H. *The Move to Metric; Trade-Law ProvisionGives It a Renewed Push'. Industry Week; Penton/IPC (Trends andAnalysis); 17 Oct, 1983: p29 .Note: avail, at RSIC.LEGISLATION-FEDERAL/INTERNATIONAL TRADE/POLICIES AND REGULATIONS.
336. Miltcn, Hans J. (National Bureau of Standards). 'Our MetricFuture'. Construction Specifier; Feb. 1979; v 32 n 2: p3 6 -4 6 ;ISSN: 0010-6925.Note: E17905035587; E179056402.CONSTRUCTION.
337. (National Bureau of Standards, Washington DC). "NBSGuidelines for Use of the Metric System; Conversion of U.S.Customary Units o! Length, Area, and Volume to SI; New Edition ofOfficial Publication on the International System of Units (SI)'.Dimensions; Oct. 1977; v 61 n 10.Note: NTIS PB-275 121/4; avail, at RSIC.GUIDELINES/STANDARDS-UNITS OF MEASUREMENT.
54
338. Odom, Jeffrey V. (National Bureau of Standards, WashingtonDC). 'Weights and Measures Play Vital Roles in Metrication'.Metric News; May/Jun. 1977; v 4 n 3: 5,11,29n.p.Note: NTIS PB-271 170/3.WEIGHTS AND MEASURES/EDUCATION-GENERAL/POLICIES AND REGULATIONS.
339. Oxford, Jr., C. 'Cutting Tools/Taps. XIII. Metric Taps'.Manufacturing Engineering (USA); Jul. 1977; v 79 n 1: p29-30.Note: avail, at RSIC.MACHINE TOOLS.
340. Parkin, R. 'Standardization-The Continuous Challenge, Part1'. Production Engineer; Dec. 1977; v 56 n 12: p16-19.Note: avail, at RSIC.STANDARDIZATION.
341. Parnell, R.; Garrod, G. (Prince George Pulp & Paper Ltd.)."Going Metric: How Intercontinental and Prince George Converted'.Pulp & Paper Canada; Dec. 1978; v 79 n 12: p64-69; ISSN: 0316-4004.Note: E17904027126; E179064138.CANADA-METRICATION/PULP MILLS.
342. Peters, J.; Leuven, K.U. *Metrology in Design andManufacturing-Facts and Trends*. CIRP Annalen; 1977; v 26 n 2:p415-420.Note: avail, at RSIC.MANUFACTURING/DESIGN.
343. Pohl, Jr., John J. 'Calls for Comment'. MechanicalEngineering; The American Society of Mechanical Engineers (ASMECodes & Standards); Jul. 1988: plll.Note: avail, at RSIC.ENGINEERING-MECHANICAL.
e344. Port, Otis; Shaw, Jane S. 'Why the GAO Is Wrong onMetrication'. Business Week; McGraw-Hill, Inc. (IndustrialProduction); 4 Dec 1978: p98J.Note: avail. at RSIC.BUSINESS/COMMENTARY.
345. Priestley, C. 'Metric Board Clos -" Conversion Inches Along'.Purchasing; 7 Oct, 1982; v 93 n 7: plMARKETING/INTERNATIONAL, TRADE.
346. Quinn, M.L. (Nebraska Wesleyan University, Lincoln, NE).'Alternative Metric Units for Acre-Foot and Acre-Inch'. Journal ofIrrigation and Drainage Engineering; Aug. 1987; v 113 n 3: p39 3-404; ISSN: 0733-9437.Note: E18711112891; avail, at RSIC.IRRIGATION/STANDARDS-UNITS OF MEASUREMENT.
55
347. Raymer, D.A. (J. H. Fenner & Co, Hull, Yorkshire, England).'Mechanical Power Transmission - The Latest Trends'. South AfricanMechanical Engineer; Jun. 1977; v 27 n 6: p171-175;ISSN: 0038-2442.Note: E17802012977; E178068227; avail, at RSIC.ENGINEERING-MECHANICAL/SOUTH AFRICA-METRICATION.
348. Rix, R. "Storage Association Targets Include Standards (forCanada), Metrication*. Materials Management & Distribution; Feb.1978; v 23 n 2: p15-17.CANADA-METRICATION/WAREHOUSING.
349. Ruby, Lawrence. "Advanced Reactors: The Case for MetricDesign'. Nuclear News, The American Nuclear Society, 555 NorthKensington Ave, La Grange Park, IL 60525; Oct. 1986: p55,Perspectives.Note: avail, at RSIC.ENERGY/ENGINEERING-NUCLEAR.
350. Rumpel, F. (American National Metric Council, Washington DC).'US Refinery (Sun Oil, Toledo) Goes Metric'. HydrocarbonProcessing; Mar. 1979; v 58 n 3: p205-21 2 .Note: avail, at RSIC.PETROLEUM/INDUSTRY.
351. Schwarz, A.J. (Valve and Fittings Div., Gould Inc., Chicago,IL). 'Understanding Hydraulic Hose Fittings: The MetricConnection'. Hydraulics and Pneumatics; Jul. 1977; v 30 n 7:p87-90.Note: avail, at RSIC.HYDRAULICS.
352. Short, L.G. (Creat. Universal, Inc., Southfield, MI 48075).'Metrication: What Can HRD Specialists Do* (Human ResourceDevelopment). Training and Development Journal; May, 1978; v 32n 5: p2 5-28 .Note: avail, at RSIC.EDUCATION-GENERAL.
353. Shvartsburd, Vladimir. 'Conversion Factors Clarify GasMeasurement Bases*. Oil & Gas Journal; Pennwell Pub. Co.(Technology); 9 Oct, 1978: p93.Note: avail, at RSIC.PETROLEUM/GUIDELINES.
354. (ASME Metric Study Committee). "SI: The Weight/MassControversy'. Mechanical Engineering; 9 Sep, 1977; v 99 n 9:p4 0-4 1.Note: avail, at RSIC.STANDARDS-UNITS OF MEASUREMENT/ENGINEERING-MECHANICAL.
56
355. 'Slow March Towards Fastener Metrication Has to QuickenStep'. Engineer (GB); 23 Jun, 1977; v 244 n 6326: p51 .Note: avail, at RSIC.FASTENERS/MANUFACTURING.
356. Smith, Karen Haas. "Metrics in the Construction Industry - AStatus Report'. Specifying Engineer; Nov. 1979; v 42 n 6: p82-84;ISSN: 0164-5242.Note: E18101001688; EI81019764; avail, at RSIC.CONSTRUCTION.
357. Smolen, A.M. (Fluor Engineers and Constructors Inc., Irvine,CA). "ASME Boiler and Pressure Vessel Code'. MechanicalEngineering; Sep. 1979; v 101 n 9: pl14-116, 118-122.Note: avail, at RSIC.BOILERS/ENGINEERING-MECHANICAL.
358. Smyth, D.V. (Peck Spring Co., Plainville, CN). 'Relationshipand Effect of the Spring Index and Number of Coils per Inch, inMetric Terms'. Springs Magazine; Oct. 1977; v 16 n 2: p38-44.SPRINGS.
359. 'The Snail-like Pace of Metric Packaging'. Chemical Week;McGraw-Hill (Packaging); 2 Jul, 1980: p40.Note: avail, at RSIC.PACKAGING/CHEMICALS.
360. Sokol, Louis F., Metrication Consultant. '24- Hour Clock'.Aviation Week and Space Technology; McGraw-Hill, Inc. (Letters tothe Editor); 19 Mar, 1984: p13 2 .Note: avail, at RSIC.TIME METRICATION/AEROSPACE/AVIONICS.
361. Stanfield, Rochelle L. 'Bureaucrat Can't Count On His OldAllies'. National Journal; National Journal, Inc. (Education; IronTriangle); 28 Mar, 1981; v 13 n 13: p525.Note: avail, at RSIC.EDUCATION-GENERAL.
362. Stull, N.R. 'Fluid Power Standardization, Metrification'.Hydraulics and Pneumatics; Sep. 1977; v 30 n 9: p90-93.Note: avail, at RSIC.HYDRAULICS.
363. Sumner, L. 'Management of Change as a Means of AchievingEconomic Production'. Engineering (GB); Aug. 1977; v 217 n 8:p641-4.Note: avail, at RSIC.MANAGEMENT/MANUFACTURING.
364. "Taking Measures to Go Metric'. Chemical Week; McGraw-Hill,Inc. (Markets); I Feb. 1978: p48.Note: avail, at RSIC.CHEMICALS.
57
365. Teresko, J. *Going Metric Inch by Inch*. Industry Week; 30Nov, 1981; v 211 n 5: p69-77.Note: avail, at RSIC.STANDARDIZATION/INDUSTRY/INTERNATIONAL TRADE.
366. Thorne, E.W. 'Designing Metric Pumps for Modular Production'.Chartered Mechanical Engineer; May, 1978; v 25 n 5: p5 9-6 2 .
Note: avail, at RSIC.PUMPS/ENGINEERING-MECHANICAL.
367. *Threaded Fasteners". Production Engineering (Cleveland, OH);Aug. 1977; v 24 n 8: p40-46; ISSN: 0146-1737.Note: E17802009873; E178031231; avail, at RSIC.FASTENERS.
368. Trowbridge, R. (Engineering Staff, General Motors Corp.,Warren, MI). 'The Age of Prediction Through Measurement andControl: Hatching the Metric Egg* (US switch to metric system).Mechanical Engineering; Feb. 1979; v 101 n 2: p51-52.Note: avail, at RSIC.ENGINEERING-MECHANICAL.
369. Tufts, Thomas Clark. *Metrication: Controversy andOpportunity'. Progressive Architecture; Mar. 1979; v 60 n 3:p96-99; ISSN: 0033-0752.Note: E17906044584; E179056403.ARCHITECTURE/STANDARDS-UNITS OF MEASUREMENT.
370. Underwood, G.T. (U.S. Dept. of Commerce). 'The Metric Issuein World Trade'. Business America; 25 Jun, 1984; v 7 n 13: p8-10;ISSN: 0361-0438.Note: avail, at RSIC.INTERNATIONAL TRADE/MARKETING.
371. "Use of SI Units* (in the UK). Hydraulic Pneumatic MechanicalPower; Aug. 1978; v 24 n 284: p384.Note: avail, at RSIC.UNITED KINGDOM-METRICATION/STANDARDS-UNITS OF MEASUREMENT.
372. Vasilash, G.S. 'Fasteners: Finding the Right Fit and KeepingIt'. Manufacturing Engineering, Dearborn, MI; Oct. 1979; v 83 n 4:p59-64.Note: avail, at RSIC.FASTENERS/AEROSPACE/MANUFACTURING.
373. Vernick, Arnold S. *Metrication Overview: A Report from theChairman of the Metrication Committee'. Water Pollution ControlFederation Journal; Sep. 1987; v 59 n 9: p810-8 12 ;ISSN: 0043-1303.Note: E18712125222; avail, at RSIC.ENGINEERING-SANITARY.
58
374. Wandmacher, Cornelius (University of Cincinnati, OH).*Modernized Metric System - SI - The American Choice'. AmericanSociety of Civil Engineers, Journal of the Construction Division;Mar. 1982; v 108 n COl: p93-104; ISSN: 0569-7948.Note: E18206048142; E182020889; avail, at RSIC.ENGINEERING-CIVIL/CONSTRUCTION.
375. Warring, R.H. "Metrication--The Academics' Delight'.Hydraulic Pneumatic Mechanical Power; 27 Nov, 1981; v 27 n 323:p505-507; ISSN: 0306-4069.Note: avail, at RSIC.EDUCATION-ENGINEERING/EDUCATION-GENERAL.
376. 'Watt's Up With the Joule?'. National Journal; NationalJournal, Inc. (Energy); 9 Apr, 1977; v 9 n 15: p561.Note: avail, at RSIC.ELECTRICITY/STANDARDS-UNITS OF MEASUREMENT.
377. Webber,D.E. 'Metrication and the Accountant'. ManagementAccounting; Jun. 1976; v 57 n 12: p49-50.ACCOUNTING.
378. (National Bureau of Standards, Washington DC). 'What Won'tChange as We 'Go Metric'; SI Revisited'. Dimensions/NBS; Nov. 77;v 61 n 11.Note; NTIS PB-274 598/2; avail, at RSIC.COMMENTARY/STANDARDS-UNITS OF MEASUREMENT.
379. 'What's Happening to Metrics'. Compressd Air; 1982; v 87 n 6:p14-17.Note: avail, at RSIC.COMMENTARY.
380. Whiteley, J. *British Engineering Inches Towards theMillimetre'. Metalworking Production; Mar. 1978; v 122 n 3:p86-8 7 .Note: avail, at RSIC.UNITED KINGDOM-METRICATION/ENGINEERING-METALS.
381. Whitten, Charles A. (American National Metric Council,Washington DC). 'Metrication for Surveying and Mapping'. AmericanSociety of Civil Engineers, Journal of the Surveying and MappingDivision; Nov. 1978; v I04 n 1: p7-13; ISSN: 0569-8073.Note: EI7812094493; avail, at RSIC.SURVEYING/MAPPING/STANDARDS-UNITS OF MEASUREMENT.
382. 'Will Metrication Yield a Payoff'. Chemical Week, McGraw-Hill, Inc. (Top of the News); 11 Apr, 1979: p2 4 .Note: avail, at RSIC.COST ANALYSIS/CHEMICALS.
59
383. Winton, John M. "Chemical Makers Chart the 'Last Mile'".Chemical Week; McGraw-Hill, Inc. (Top of the News); 12 Apr, 1978:p15 .Note: avail, at RSIC.CHEMICALS/PROGRESS IN METRICATION.
384. Yawn, David. "Importers and Exporters Live With ConfusionWhile Standards Rewritten'. Memphis Business Journal; Mid-SouthCommunications, UMI/Data Courier (Business Dateline); 4 May, 1987;v 8 n 49: sec 1 p50 .INTERNATIONAL TRADE.
385. York, J.W.; Rarick, Keith; Petershack, Victor. 'MetricationTrends in Motors, Chains, and Gears'. Power Transmission Design;Sep. 1977; v 19 n 9: p66; ISSN: 0032-6070.Note: E17712092614; E177067888; avail, at RSIC.MOTORS/MANUFACTURING.
386. Zeiter, W.E. *Progress Report on United States Metrication -Will Timely State Adoption of a Metric Conversion ImplementationAct Save Us from a Troubled Conversion Effort?'. Business Lawyer;1978; v 33 n 2: p641-692.COMMENTARY/PROGRESS IN METRICATION/LEGISLATION-STATE.
60
SUBJECT INDEX - PERIODICALS/SERIALS
ACCOUNTING: 252,377
AEROSPACE: 285,286,360,372
AIR CONDITIONING: 260,264,272
ANTITRUST: 294
ARCHITECTURE: 369
ARMY: 314
AUSTRALIA-METRICATION: 282.327
AVIONICS: 275,298,314,328,360
BOILERS: 309,357
BUILDING: 322
BUSINESS: 263,295,325,332,333,344
CANADA-METRICATION: 255,259,282,315,318,319,320,334,341,348
CHEMICALS: 359,364,382,383
COMMENTARY: 250,255,262,271,277,278,281,282,283,284,288,30305,344.378,379,386
COMMERCE: 264
CONSTRUCTION: 262,272,311,336,356,374
CONSUMERS: 271,277
COST ANALYSIS: 255,282,288,294,310,317,328,382
DESIGN: 307,342
EDUCATION-ENGINEERING: 276,375
EDUCATION-GENERAL: 288,296,303,338,352,361,375
ELECTRICITY: 265,267,376
ENERGY: 349
ENGINEERING: 307
ENGINEERING-BIOMEDICAL: 289
61
ENGINEERING-CIVIL: 253,262,301,310,311,374
ENGINEERING-MANUFACTURING: 304
ENGINEERING-MECHANICAL: 260,269,291,299,303,309,343,347,354357,366,368
ENGINEERING-METALS: 380
ENGINEERING-NUCLEAR: 349
ENGINEERING-SANITARY: 373
FASTENERS: 270,323,355,367,372
FLUID MECHANICS: 260
FOUNDRY PRACTICE: 279
GEARING: 257,292,312
GRAPHIC ARTS: 256
GUIDELINES: 261,290,307,322,337,353
HANDBOOK: 279,296
HEATING: 260,264,272
HIGHWAYS: 253
HYDRAULICS: 351,362
INDUSTRY: 278,293,298,330,350,365
INDUSTRY-GAS: 273,303
INTERNATIONAL TRADE: 261,263,268,294,312,316,325,335,345,365370,384
IRRIGATION: 346
LEGISLATION: 252,317
LEGISLATION-FEDERAL: 335
LEGISLATION-STATE: 386
MACHINE TOOLS: 274,292,297,339
MANAGEMENT: 262,302,310,315,363
MANUFACTURING: 261,280,293,313,324,326,330,342,355,363,372385
62
MAPPING: 361
MARKETING: 277,285,300,334,345,370
MATHEMATICS-GENERAL: 304
MEDICINE: 266,289
MOTOR VEHICLE: 318,319
MOTORS: 269,385
PACKAGING: 249,359
PETROLEUM: 252,258,350,353
POLICIES AND REGULATIONS: 335,338
PROGRESS IN METRICATION: 248,284,286,306,383,386
PSYCHOLOGY: 259,318,319
PULP MILLS: 341
PUMPS: 331,366
SOLAR TECHNOLOGY: 254
SOUTH AFRICA-MERICATION: 347
SPEAKERS: 281
SPRINGS: 358
STANDARDIZATION: 285,340,365
STANDARDS: 258,264,165,270,324
STANDARDS-SCREWS: 293
STANDARDS-UNITS OF MEASUREMENT: 249,254,266,273,290,330,337346,354,369,371,376,378,381
SURVEYING: 381
TIME AND ANGULAR MEASURES: 308
TIME METRICATION: 360
UNITED KINGDOM-METRICATION: 251,252,257,282,300,309,312,329332,333,371,380
UTILITIES-WATER: 287
WAREHOUSING: 348
63
WEAPON SYSTEM-MX: 314
WEIGHTS AND MEASURES: 338
WELDING: 321
64
NEWSPAPERS
387. "100th Congress, First Session, Wednesday, April 8, 1987'.Daily Report For Executives. Bureau of National Affairs, Inc.,Washington DC; 9 Apr, 1987; Congressional and PresidentialActivities; Legislative Calendar; House; DER No. 67: pF-2.Note: avail, at RSIC.LEGISLATION-FEDERAL.
388. '100th Congress, First Session, Thursday, July 9, 1987".Daily Report For Executives. Bureau of National Affairs, Inc.,Washington DC; 10 Jul, 1987; Congressional and PresidentialActivities; Legislative Calendar; Senate; DER No. 131: pF-1.Note: avail, at RSIC.LEGISLATION-FEDERAL.
389. "100th Congress, First Session, Friday, March 20, 1987".Daily Report For Executives. Bureau of National Affairs, Inc.,Washington DC; 23 Mar, 1987; Congressional and PresidentialActivity; Legislative Calendar; RESS; Senate; DER No. 54: pF-2.Note: avail, at RSIC.LEGISLATION-FEDERAL.
390. *Advertisements End for Petrol in Gallons'. The DailyTelegraph. The Daily Telegraph plc, London; 10 Jan, 1989: p4 .Note: avail, at RSIC.CONSUMERS/MARKETING/UNITED KINGDOM-METRICATION.
391. Allen, Ira R., Washington. 'Metric Supporters Push For Metersand Liters'. United Press International. The United PressInternational, Washington DC; 9 Feb, 1962; Washington News.COMMERCE/PROGRESS IN METRICATION.
392. Balkan, Donna, Reporter, Ottawa Citizen. "Coping WithMetrication in Canada'. The New York Times. The New York TimesCompany, NY; 10 Aug, 1980; Section 10, Travel Desk: p5, col. 1.Note: avail, at RSIC.METRICATION-CANADA.
393. Barringer, Felicity, Staff Writer. 'Brave New World of Metrica Mile Away'. The Washington Post. Washington DC; 19 Nov, 1981;First Section, The Federal Report: A29Note: avail, at RSIC.COMMENTARY/PROGRESS IN METRICATION.
394. Benedict, Howard, Associated Press Writer, Washington DC.'Odometer'. Associated Press. Associated Press, 50 Rockefeller,New York 10020; 2 Aug, 1977.Note: avail, at RSIC.CCNSUMERS/POLICIZS AND REGULATIONS/MOTOR VEHICLES-ODOMETERS.
65
395. Benedict, Howard, Associated Press Writer, Washington DC.*Road Signs-Metric'. Associated Press. The Associated Press, 50Rockefeller, New York 10020; 24 Jun, 1977.Note: avail, at RSIC.PROGRESS IN METRICATION/LEGISLATION-FEDERAL/HIGHWAYS.
396. Benedict, Howard, Associated Press Writer, Washington DC.'Speed Signs-Metric'. Associated Press. The Associated Press, 50Rockefeller, New York 10020; 25 Apr, 1977.Note: avail, at RSIC.POLICIES AND REGULATIONS/PROGRESS IN METRICATION.
397. 'Bills Introduced Sep 27'. Daily Report for Executives. TheBureau of National Affairs, Inc., Washington DC; 29 Sep, 1988;Congressional and Presidential Activity, House; DER No. 189.Note: avail, at RSIC.LEGISLATION-FEDERAL.
398. Black, Norman, AP Military Writer. 'Star Wars - Metric*.Associated Press. The Associated Press, 50 Rockefeller, New York10020; 18 Nov, 1987; Washington Dateline.Note: avail, at RSIC.WEAPONS SYSTEM/DEPARTMENT OF DEFENSE/STRATEGIC DEFENSE INITIATIVE.
399. Boffey, Philip M., Special to the New York Times. 'Experts toStudy Crawl Toward Metric System'. The New York Times. The NewYork Times Company, New York; 25 Apr, 1983; Section A: plO, col 1.Note: avail, at RSIC.COMMENTARY.
400. Bradsher, Keith, Times Staff Writer. 'Exports Lead U.S.Toward Metric System'. The Los Angeles Times. Los Angeles, CA; 20Nov, 1988; Home Edition, Business; Part 4: pl, col 5; FinancialDesk.Note: avail, at RSIC.INTERNATIONAL TRADE/MANUFACTURING.
401. Buchanan, Robert F. *Metric'. United Press International.Washington DC; 10 Sep, 1981; Regional News, Maryland.Note: avail, at RSIC.PROGRESS IN METRICATION.
402. 'Canadian News Briefs'. United Press International, UnitedPress Canada. The United Press International, Washington DC; 29Mar, 1982; Regional News, Vancouver.Note: avail, at RSIC.COMMENTARY.
403. Cherrington, John. 'Why Farmers Falter in Their Conversion toMetric; Hectare Is Still a Foreign Term to Farmers*. FinancialTimes. The Financial Times Lixtited, Toronto, ON; 2 Mar, 1984;Section III, Commodities and Agriculture: p40 .Note: avail, at RSICAGRICULTURE/CANADA-METRICATION.
66
404. 'Consumer Advocate Sues to Prevent More Metric Gas Pumps*.Associated Press. The Associated Press, 50 Rockefeller, New York10020; 3 Mar, 1980; Business News, Mineola, NY.Note: avail, at RSIC.CONSUMERS/LEGISLATION-STATE.
405. Cook, Louise, Associated Press Writer. 'Consumer Scorecard".Associated Press. The Associated Press, 50 Rockefeller, New York10020; 31 Mar, 1978.Note: avail, at RSIC.GOVERNMENT-FEDERAL/PROGRESS IN METRICATION.
406. Cook, Louise, Associated Press Writer. 'Consumer Watch'.Associated Press. The Associated Press, 50 Rockefeller, New York10020; 27 Aug, 1979.Note: avail, at RSIC.CONSUMERS/PROGRESS IN METRICATION.
407. Cowen, Robert C. 'To Meter or Not to Meter". The ChristianScience Monitor, Midwestern Edition. The Christian SciencePublishing Society, Ann Arbor MI; 23 Dec, 1981; Science: ResearchNotebook: p16.Note: avail, at RSIC.COMMENTARY.
408. *Creeping Metrics'. Associated Press. The Associated Press,50 Rockefeller, New York 10020; 3 Apr, 1988; AP Newsfeatures,Domestic News.Note: avail, at RSIC.BUSINESS-LARGE/COMMENTARY.
409. Crutsinger, Martin, Associated Press Writer, Washington DC.'Gasoline Retailers Adopt Metric Plan'. The Associated Press. TheAssociated Press, 50 Rockefeller, New York 10020; 9 Apr, 1980;Business News.Note: avail, at RSIC.MARKETING/INDUSTRY-GAS.
410. Dawkins, William. *Goodbye to the Gill, Gallon, and AllThat'. Financial Times. The Financial Times Ltd., Toronto, ON; 26Oct, 1988; sec. 1; World Trade News: pS.Note: avail, at RSIC.INTERNATIONAL TRADE/CANADA-METRICATION.
411. Doan, Michael, Associated Press Writer, Washington DC.'Metric-Washington'. Associated Press. The Associated Press, 50Rockefeller, New York 10020; 19 Dec, 1977.Note: avail, at RSIC.COMMENTARY.
67
412. Freed, Kenneth, Times Staff Writer, Ottawa. *Canada Retreatson Shift to Metric; Will Use Dual System to Soothe Critics'. TheLos Angeles Times. The Times Mirror Company, Los Angeles; 16 Feb,1985; Home Edition, Part 1, Foreign Desk: p12, col 1.Note: avail, at RSIC.CANADA-METRICATION.
413. Gilpin, Kenneth N. 'Business Conditions; Liter Pricing at thePump. The New York Times. The New York Times Company, New York; 1Feb, 1981; Section 3, Financial Desk: p18, col. 3.Note: avail, at RSIC.MARKETING/CONSUMERS/INDUSTRY-GAS.
414. Giniger, Henry, Special to The New York Times. *For Canada,Metric Drive Inches Ahead'. The New York Times. The New York TimesCompany, New York; 14 Mar, 1982; Section 1, Part 1, Foreign Desk-Ottawa: p15, col 1.Note: avail, at RSIC.CANADA-METRICATION.
415. *Go Metric and Stay in the Economic Fast Lane; For HardConversion'. The New York Times. The New York Times Company, NewYork; 21 Feb, 1987; Section 1, Editorial Desk: p26, col 3.Note: avail, at RSIC.COMMENTARY/BUSINESS.
416. "Government Briefs'. United Press International. WashingtonDC; 21 Jan, 1981; Regional News, Carson City, NV.Note: avail, at RSIC.PROGRESS IN METRICATION/LEGISLATION-STATE.
417. Hanley, Charles J., Associated Press Writer, Ottawa. *CanadaGoes For Centimeters While US Inches Toward Metric System'.Associated Press. The Associated Press, 50 Rockerfeller, New York10020; 26 Dec, 1981; International News, Washington DC.Note: avail, at RSIC.COMMENTARY/CONSUMERS.
418. Hidlay, William C., Associated Press Writer, Chicago. 'MetricMovement Fizzles, Putting US Companies at Disadvantage'.Associated Press. The Associated Press, 50 Rockefeller, New York10020; 17 Oct, 1986; Business News.Note: avail, at RSIC.INTERNATIONAL TRADE/BUSINESS/COMMENTARY.
419. Horak, Kathy, Associated Press Writer. 'Metric'. AssociatedPress. The Associated Press, 50 Rockefeller, New York 10020; 19Oct, 1979; Domestic News, Dearborn, MI.Note: avail, at RSIC.COMMENTARY.
68
420. Horak, Kathy, Associated Press Writer. 'Metric'. AssociatedPress. The Associated Press, 50 Rockefeller, New York 10020; 18Oct, 1979; Domestic News, Dearborn, MI.Note: avail, at RSIC.CONSUMERS/COMMENTARY.
421. 'House Science Committee Approves Bill Expected to BeIncluded in Conference on Omnibus Trade Bill'. Daily Report ForExecutives. Bureau of National Affairs, Inc., Washington DC; 24Jul, 1987; Economic Developments: Industrial Policy;DER No. 141: pL-1.Note: avail, at RSIC.LEGISLATION-FEDERAL/INTERNATIONAL TRADE.
422. Jackson, Maggie, Associated Press Writer, London. *BritainSet to Keep Pint and Mile as Metric Deadline Nears'. AssociatedPress. The Associated Press, 50 Rockefeller, New York 10020; 23Sep, 1988; Business News.Note: avail, at RSIC.UNITED KINGDOM-METRICATION/CONSUMERS/BUSINESS.
423. Kilman, Lawrence, Associated Press Writer, New York. 'MostAmericans Still Don't Know Metrics and Oppose Adoption'.Associated Press. The Associated Press, 50 Rockefeller, New York10020; 31 Mar, 1986; Domestic News.Note: avail, at RSIC.COMMENTARY/CONSUMERS.
424. Knight, Athelia. 'Area Schools Readying for Conversion toMetrics; Area Students Begin Shifting to the Metric System'. TheWashington Post. Washington DC; 6 Dec, 1977: Cl.Note: avail, at RSIC.EDUCATION-GENERAL.
425. Kramer, Larry, Staff Writer. 'Gas Pump Conversion to MetricsInvestigated'. The Washington Post. Washington DC; 8 Apr. 1979;Business & Finance: Dg.Note: avail, at RSIC.MARKETING/CONSUMERS.
426. LeBreton, Edmond, Associated Press Writer, Washington DC.'Metric Booze'. Associated Press. The Associated Press, 50Rockefeller, New York 10020; 24 Oct, 1978.Note: avail, at RSIC.MARKETING/CONSUMERS.
427. Mansfield, Stephanie. 'Meeting Metric Measures; They'll Takea Kilometer'. The Washington Post. Washington DC; 15 Mar, 1978;Living In Style: Ll.Note: avail, at RSIC.COMMENTARY.
6S
428. 'Measurement Error Caused Fuel Shortage in Downed Jet'.Associated Press, 50 Rockefeller, New York 10020. The AssociatedPress; 29 Jul, 1983; International News, Montreal.Note: avail, at RSIC.AVIONICS.
429. *Metric Board Urges Conversion to Liter at Gas Pumps'.Associated Press. The Associated Press, 50 Rockefeller, New York10020; 15 Dec, 1979; Domestic News, Orlando, FL.Note: avail, at RSIC.COMMENTARY/INDUSTRY-GAS.
430. 'Metric'. Associated Press. The Associated Press, 50Rockefeller, New York 10020; 5 Jul, 1979; Kamloops, BC.Note: avail, at RSIC.CONSUMERS/CANADA-METRICATION.
431. 'Metric'. United Press International. The United PressInternational, Washington DC; 23 Dec, 1980; Regional News, Ottawa.Note: avail, at RSIC.CANADA-METRICATION.
432. 'Metric'. United Press International. The United PressInternational, Washington DC; 12 Dec, 1980; Regional News, NewOrleans, LA.Note: avail, at RSIC.PROGRESS IN METRICATION/INDUSTRY.
433. *Metric'. United Press International. The United PressInternational, Washington DC; 1 Dec, 1980; Regional News,Gainesville, FL.Note: avail, at RSIC.PROGRESS IN METRICATION/EDUCATION-GENERAL.
434. 'Metric'. United Press International. The United PressInternational, Washington DC; 15 Apr, 1981; Regional News, Ottawa.Note: avail, at RSIC.CANADA-METRICATION/COMMENTARY/CONSUMERS.
435. 'Metric'. United Press International. The United PressInternational, Washington DC; 8 Jan, 1982; Regional News, CA.Note: avail, at RSIC.INTERNATIONAL TRADE/COMMENTARY/ECONOMIC IMPACT.
436. 'Metric'. Reuters. Reuters Limited, 410 llth Avenue South,Hopkins, MN 55343; 30 Nov, 1983; International News, Ottawa.Note: avail, at RSIC.CANADA-METRICATION/MARKETING.
437. Nazaruk, Pamela, Editor. The Metric Reporter, AmericanNational Metric Council. 1010 Vermont Ave. NW, Suite 1010,Washington DC 20005.Note: published monthly, avail, at RSIC.COMMENTARY/PROGRESS IN METRICATION.
70
438. Newhouse, Eric, Associated Press Writer. 'Mechanics Ask forCars Made Totally by Metric System'. Associated Press. TheAssociated Press, 50 Rockefeller, New York 10020; 17 Apr, 1980;Domestic News, St. Louis, MO.Note: avail, at RSIC.PROGRESS IN METRICATION/MOTOR VEHICLE.
439. Parkes, Christopher. *Delay Seen in EEC Food Trade Reforms'.Financial Times. Financial Times Limited, Toronto, ON; 27 Jun,1986; Section I; UK News: p8.UNITED KINGDOM-METRICATION/MARKETING.
440. 'Pint and Mile to Survive Metrication'. The Daily Telegraph.The Daily Telegraph plc; London; 26 Oct, 1988.Note: avail, at RSIC.CONSUMERS/UNITED KINGDOM-METRICATION.
441. 'Poll-Questions'. Associated Press. The Associated Press, 50Rockefeller, New York 10020; 30 Mar, 1986; Domestic News.Note: avail, at RSIC.COMMENTARY/CONSUMERS.
442. Ross, Nancy L., Staff Writer. "50% of Fortune 500 FirmsChanging to Metric System; Consumers Oppose Shift 2 to 1'. TheWashington Post. Washington DC; 10 Dec, 1978; Business &Finance: F3.Note: avail, at RSIC.BUSINESS-LARGE/CONSUMERS.
443. Shan, Tse Pui, Associated Press Writer, Hong Kong. 'Hong Kongis Going Metric'. Associated Press. The Associated Press, 50Rockefeller, New York 10020; 6 Jun, 1983; International News.Note: avail, at RSIC.HONG KONG-METRICATION.
444. 'Small Firms Will Benefit Most from Metric System Conversion,Official Says'. Daily Report for Executives. The Bureau ofNational Affairs, Inc., Washington DC; 5 Dec, 1988; Regulation,Economics, and Law; DER No. 233, International Trade.Note: avail, at RSIC.BUSINESS-SMALL/INTERNATIONAL TRADE.
445. Sokol, Louis F., Editor. USMA Newsletter, U.S. MetricAssociation. 255 Mountain Meadows Road, Boulder, CO 80302.Note: published bimonthly, avail, at RSIC.PROGRESS IN METRICATION/COMMENTARY.
446. *Supreme Court of the United States-Metrics'. AssociatedPress. The Associated Press, 50 Rockefeller, New York 10020; 30Nov, 1981; Washington Dateline.Note: avail, at RSIC.LEGISLATION-FEDERAL.
71
447. Trautman, Robert. 'U.S. Ends Isolation, Drops Inch/Pound forMeter/Kilo'. Reuters. Reuters, Limited, 410 llth Ave. S., Hopkins,MN 55343; 27 Oct 1988; Washington DC.Note: avail, at RSIC.INTERNATIONAL TRADE/LEGISLATION-FEDERAL/BUSINESS.
448. 'U.S. Contractors Face 1992 Mandate for Use of MetricSystem'. Daily Report for Executives. Bureau of National Affairs,Inc.. Washington DC; 13 Dec, 1988; Regulation, Economics, and Law;DER No. 239, Contract Policy.Note: avail, at RSIC.LEGISLATION-FEDERAL/MANAGEMENT/POLICIES AND REGULATIONS/ECONOMIC IMPACT.
449. *Valve Manufacturers Regarding to Metrication*. PR Newswire.McLean, VA; 14 Nov, 1980.Note: avail, at RSIC.MANUFACTURING/ENGINEERING-MANUFACTURING.
450. Veaey, Tom, Washington Post Staff Writer. 'US Doesn't Followthe Liter; Public Slow to Accept Conversion to Metric System'. TheWashington Post. Washington DC; 10 Sep, 1984; First Section: A1O.Note: avail, at RSIC.COMMENTARY/CONSUMERS.
451. *When to Be Reactionary'. The Washington Post. Washington DC;17 Apr, 1979; First Sect., Editorial: A20Note: avail, at RSIC.COMMENTARY.
72
SUBJECT INDEX - NEWSPAPERS
AGRICULTURE: 403
AVIONICS: 428
BUSINESS: 415,418,422,447
BUSINESS-LARGE: 408,442
BUSINESS-SMALL: 444
CANADA-METRICATION: 403,410,412,414,430,431,434,436
COMMENTARY: 393.399,402,407,408,411,415,417,418,419,420,423427,429,434,435,437,441,445,450,451
COMMERCE: 391
CONSUMERS: 390.394,404.406,413,417,420,422,423,425,426,430434,440,441,442,450
DEPARTMENT OF DEFENSE: 398
ECONOMIC IMPACT: 435,448
EDUCATION-GENERAL: 424,433
ENGINEERING-MANUFACTURING: 449
GOVERNMENT-FEDERAL: 405
HIGHWAYS: 395
HONG KONG-METRICATION: 443
INDUSTRY: 432
INDUSTRY-GAS: 409,413,429
INTERNATIONAL TRADE: 400,410,418,421,435,444,447
LEGISLATION-FEDERAL: 387,388,389,395,397,421,446,447,448
LEGISLATION-STATE: 404,416
MANAGEMENT: 448
MANUFACTURING: 400,449
MARKETING: 390,409,413,425,426,438,439
73
METRICATION-CANADA: 392
MOTOR VEHICLE: 438
MOTOR VEHICLES-ODOMETERS: 394
POLICIES AND REGULATIONS: 394,398,448
PROGRESS IN METRICATION: 391,393,395,396,401,405,406,416,432433,437,438,445
STRATEGIC DEFENSE INITIATIVE: 398
UNITED KINGDOM-METRICATION: 390,422,439,440
WEAPONS SYSTEM: 398
74
STANDARDS
452. Ambs, H.D. (SCM Corp. Johnstown, PA). 'Practical Metricationfor P/M'. International Journal of Powder Metallurgy and PowderTechnology; Jan. 1978; v 14 n 1: p57-62; ISSN: 0361-3488.Note: E17806043118; E178053443; avail, at RSIC.METALLURGY/INDUSTRY.
453. Boitsov, V.V.. Zlatarev, P.; Werner, L.; Podgruski, T.;Stuller G.; Berest, A.A.; Belotserkovsky, V.I.; Ivlev, A.I.;Chernoyarsky, A.A.; Tarbeev, Y.V.; Ivanov, Y.N.; Selivanov, P.N.;Losev, B.F.; Semenko, N.G.; Isaev, L.K.; Burykina, E.G.;Teploukhova, G.A.; Mazanek, R.; Sologyan, I.K.; Kozlov, A.D.;Ilin, V.G.; Bushkin, S.B.; Stepanova, I.V.; Khusainov, N.M.;Khomyakov, G.D. (State Committee of the USSR on Standards).'COMECON Standards System* (series of articles on measurementstandards for specific variables and government participation withCOMECON standards). Izmeritel'naya Tekhnika (Translated)Measurement Techniques; Jan. 1979 (Translated) Jun. 1979;v 22 n 1: p3-43; (Translated, p1-58).Note: avail, at RSIC.COMECON/USSR-METRICATION.
454. Catalog of American National Standards. Section: MetricPractice. New York: American National Standards Institute;1987: p7 6 .INDUSTRY/ENGINEERING/COMMERCE.
455. Dann, R.T. 'New Metric Port Standard (for fluid powersystems) Has Universal Appeal'. Machine Design (USA); 12 May 1977;v 49 n 10: p82-3.Note: avail, at RSIC.ENGINEERING-MECHANICAL.
456. (Defense Industrial -Supply Center Managed Commodities,Directorate of Engineering and Standardization). "DISC-E Report'Listing of Metric Documents; Apr. 1988; 88-1. Defense IndustrialSupply Center, ATTN: DISC-ESA (Ms. D. Sprouls), 700 Robbins Ave.,Philadelphia, PA 19111-5096.Note; Updated yearly. avail, at RSICINDUSTRY-DEFENSE.
457. (Department of Defense). 'Fastener Systems for AerospaceApplications'. Washington DC: DoD; 12 Jul, 1978; MIL-STD-1515A.Note: NSA Card No: 6; avail, at RSIC.FASTENERS/AEROSPACE.
458. (American Society of Mechanical Engineers). 'GeneralTolerances for Metric Dimensioned Products': ASME; 1984;B4.3-78. 8p.Note: Industry Standards; avail, at RSIC.ENGINEERING-MECHANICAL.
75
459. (American Society of Mechanical Engineers). "Guide forMetrication of Codes and Standards SI (Metric) Units; Errata";1981; SI-9-81. 43p.Note: Industry Standards; avail, at RSIC.HANDBOOK/ENGINEERING-MECHANICAL.
480. Guist, Althea R.; Devlin, Dolores C. (Air Force Weapons Lab,Kirtland AFB, NM). "AFWL Standards for Scientific and TechnicalReports* (Final report-supercedes report * AFWL-TR-79-999, AD*A069197); Apr. 1980; AWFL-TR-80-999. 74p.Note: AD* A086088; avail, at RSIC.AIR FORCE/POLICIES AND REGULATIONS/PUBLISHING.
461. (Society of Automotive Engineers). 'Handbook of HydraulicMetric Calculations': SAE; 1981; AIR 1657-81. 24p.Note: Industry Standards; avail, at RSIC.HYDRAULICS.
462. The Identified Sources of Supply. vol. 1: Suppliers byProduct, Section H: Metric Standards. Bethesda, MD: NationalStandards Association, Inc.; c1987.Note: avail, at RSIC.INDUSTRY/AEROSPACE/DEPARTMENT OF DEFENSE.
463. Kinney, G.F.; Sewell, R.G.S.; Graham, K.J. (Naval WeaponsCenter, China Lake, CA). 'Definitive Quantity-Distance Tables forStores of Explosives" (Research report); Sep. 1981; NWC-TP-6277.16p.Note: AD* A116810; avail, at RSIC.EXPLOSIVES/OCCUPATIONAL SAFETY.
464. (Society of Automotive Engineers). *Limits and Fits -International Metric Tolerance Systems': SAE; 1982; AIR 1758-82.14p.Note: Industry Standards; avail, at RSIC.MOTOR VEHICLE.
465. (American Petroleum Institute). "Manual of PetroleumMeasurement Standards* Chapter 15- Guidelines for the Use of theInternational Syrtem of Units (SI) in the Petroleum and AlliedIndustries: API; 1987; MPMS 15-80 or PUBL 2564-80. 44p.avail, at RSIC.PETROLEUM.
466. Metric Fastener Standards. 2nd ed. Cleveland, OH: IndustrialFastener Institute; 1983.TJ1320 142 1983; avail, at RSIC.FASTENERS.
76
467. Metric National Aerospace Standards. National StandardsAssociation ed. Washington DC: National Standards Association;1978. iv., (loose-leaf), includes index of Metric NationalAerospace Standards - Numerical and Alphabetical Listings.HD 9711.5U5 M594 1978; avail, at RSIC.AEROSPACE.
468. Metric Practice Guide- Welding Handbook. 8th ed.: AmericanWelding Society, Inc. 47p.Note: Industry Standards AWS WHB-l App B; avail, at RSIC.WELDING.
469. (American Welding Society, Inc.). *Metric Practice' (WeldingInspection): AWS; WI Ch. 19. 13p.Note: Industry Standards; avail, at RSIC.WELDING.
470. (American Society of Agricultural Engineers). *Metric RowSpacings': ASAE; 1987; S404T-80. lp.Note: Industry Standards; avail, at RSIC.AGRICULTURE.
471. Metric Standards for Motors and Generators. Motor andGenerator Section Publication, National Electrical ManufacturersAssociation: Washington DC: NEMA; Nov. 1980. 130p, illus.TK2181 G946 1980; avail, at RSIC.MOTORS/GENERATORS.
472. Metric Standards: Identified Sources for Metric Parts andMaterials. Section: Standards Handbooks. Geneva, Switzerland: TheInternational Organization for Standardization (ISO); 1988: p 29;ISBN: 92-67-01049-2.Note: avail, at RSIC.HANDBOOK'INTERNATIONAL TRADE/ENGINEERING.
473. Metric Standards: NA and DS Standards. Bethesda, MD: NationalStandards Association, Inc.; 1989.Note: supplemental updates at regular intervals; contains numeroussubject listings; avail, at RSIC.AEROSPACE/GRAPHIC ARTS/INDUSTRY/DEPARTMENT OF DEFENSE.
474. (Aerospace Industries Association of America, Inc.). *NADocuments Preparation and Maintenance in SI (Metric) Units' (Rev.1): AIA/NAS; 1977; NAS 10000-77 13p.Note: avail, at RSIC.PUBLISHING.
475. Nicovich, P.A. (Sandia National Labs., Albuquerque, NM).'National and International Drawing Standards: Moving TowardBetter Alignment with Y14.5'. United States: Department of. Energy,Washington DC; 1980; NTIS SAND-80-2034C;CONF-801051-1. 24p.GRAPHIC ARTS/DEPARTMENT OF ENERGY.
77
476. (American Society of Mechanical Engineers). *Preferred MetricLimits and Fits': ASME; 1984; B4.2-78. 70p.Note: Industry Standards; avail, at RSIC.ENGINEERING-MECHANICAL.
477. (Aerospace Industries Association of America, Inc.).*Preferred Metric Units for Aerospace' (Rev.2): AIA/NAS; 1985;NAS 10001-85. 23p.Note: avail, at RSIC.AEROSPACE.
478. Product Subject Index. Lists Locator Code numbers common toall VSMF Locator Indexes. Englewood, CO: Information HandlingServices, Inc., Denver Technological Center; updated bimonthly.Note: Pee subject listings metric, metrication program, and units;avail. RSIC.INDUSTRY/MANUFACTURING/DEPARTMENT OF DEFENSE/MARITIME.
479. (Electronic Industries Association). 'Recommended Practicefor Dual Dimensioning': EIA; 1976; JEP86-A-76. 46p.Note: Industry Standards; avail, at RSIC.ELECTRONICS.
480. (Institute of Electrical and Electronics Engineers).'Recommended Practice for Preferred Metric Units for Use inElectrical and Electronics Science and Technology': IEEE; 1984;945-84. 3 4p.Note: Industry Standards; DoD adopted; avail, at RSIC.ELECTRONICS.
481. Ruff, Paul E. (Battelle Columbus Labs., OH). 'Metrication ofMIL-HDBK-5C' (Final report - 25 Apr, 1977 to 29 Aug, 1980). UnitedStates: Air Force Wright Aeronautical Labs., Wright-Patterson AFB,OH; Aug. 1980; AFWAL-TR-80-4110; NTIS AD-AO93 212/9; AEROSPACEN81-17301. 1050p.Note: avail, at RSIC.ENGINEERING-MECHANICAL/HANDBOOK/PROCUREMENT-AIR FORCE.
482. (Society of Automotive Engineers). 'Rules for SAE Use of SI(Metric) Units, Recommended Practice': SAE; May 1985; J 916-85.Note: Industry Standards; avail, at RSIC.MOTOR VEHICLE.
483. (Society of Automotive Engineers). *Standard DualDimensioning': SAE; Jun. 1982; J 390-82.Note: Industry Standards; avail, at RSIC.MOTOR VEHICLE.
484. (American Society for Testing and Materials). *Standard forMetric Practice': ASTM; 1986; E380-86. 42p.Note: Industry Standards;NRC-DoD adopted; avail, at RSIC.TESTING AND MATERIALS.
78
485. (American Society for Testing and Materials). "Standard Guidefor Selection of Scales for Metric Building Drawings': ASTM; 1988;E713-8e. 3p.Note: Industry Standards; avail, at RSIC.TESTING AND MATERIALS/BUILDING DESIGN/ARCHITECTURE.
486. (institute of Electrical and Electronic Engineers). 'StandardLetter Symbols for Units of Measurement' (SI Units, Customary'Inch-?ound' Unilg, and Certain Other Jnits): IEEE/ANSI; 1985;260-78. 24p.Note: Industry Standards; DoD adopted; avail, at RSIC.ELECTRONICS/ STANDAPDS-UNITS OF MEASUREMENT.
487. (Institute of Electrical and Electronics Engineers).'Standard Metric Practice*: IEEE; 1982; 268-82. 49p.Note: industry Standards; DoD adopted; avail, at RSIC.ELECTRONICS.
488. (American Ass-ciation of State Highway and TransportationOfficials). 'Stanidard Metric Practice Guide' (ASTM E380): AASHTO;R 1-77. 40p.Note: Industry Standards; avail, at RSIC.HIGHWAYS.
489. (American Society for Testing and Materials). 'StandardPractice for the Use of Metric (SI) Units in Building Design andConstruction' (Cornmittee E-e Supplement to E380): ASTM; 1984;E621-84, 38p.Note: Industry Standards; DoD adopted; avail, at RSIC.TESTIN3 AND MATERIALS.
490. (National Fluid Power Association). *Survey on MetricLanguage Usage by the US Fluid Power Industry': NFP(A); 1977;T2.10 2-77. '5p (appendices X and Y).Nose: Industry Standards; avail, at RSIC.FLUID MECHANICS.
491. (American Society of Heating, Refrigerating, and Air-Ccndit'oning Engineers). 'Units and Conversions' (ASHRAE Handbook-Fundamentals SI ed.): ASHRAE- 1985; CH37-85. 2p.Note: Industry Standards; avail, at RSIC.HEATING/AIR CONDITIONING.
492. (American Society of Agricultural Engineers). "Use of SI(Metric) Units': ASAE; 1988; EP285.7-88. 8p. Industry Standards;avail, at RSIC.AGRICULTUTRE
79
SUBJECT INDEX - STANDARDS
AEROSPACE: 457,462,467,473,477
AGRICULTURE: 470,492
AIR CONDITIONING: 491
AIR FORCE: 460
ARCHITECTURE: 485
BUILDING DESIGN: 485
COMECON: 453
COMMERCE: 454
DEPARTMENT OF DEFENSE: 462,473,478
DEPARTMENT OF ENERGY: 475
ELECTRONICS: 479.480.486,487
ENGINEERING: 454, 472
ENGINEERING-MECHANICAL: 455,458,459,476,481
EXPLOSIVES: 463
FASTENERS: 457,466
FLUID MECHANICS: 490
GENERATORS: 471
GRAPHIC ARTS: 473,475
HANDBOOK: 459,472,481
HEATING: 491
HIGHWAYS: 488
HYDRAULICS: 461
INDUSTRY: 452,454,462,473,478
INDUSTRY-DEFENSE: 456
INTERNATIONAL TRADE: 472
MANUFACTURING: 478
80
MARITIME: 478
METALLURGY: 452
MOTOR VEHICLE: 464,482,483
MOTORS: 471
OCCUPATIONAL SAFETY: 463
PETROLEUM: 465
POLICIES AND REGULATIONS: 460
PROCUREMENT-AIR FORCE: 481
PUBLISHING: 460,474
STANDARDS-UNITS OF MEASUREMENT: 486
TESTING AND MATERIALS: 484,485,489
USSR-METRICATION: 453
WELDING: 468
81
AUTHOR INDEX
Adler, David 62Akers, A. 68Allen, Ira R. 391Ambs, H.D. 452Andras, John 70,71Andrews, Sydney D. 72Annan, Sampson 0. 177Antoine, Valerie 73,248,249Arrowood, J.M. 74Astrop, A. 250Atkey, M. 251Atkinson, W. 252
Baass, K.G. 253Balkan, Donna 392Barbrow, Louis E. 147,148,149,158,159,160,161Barker, Robert F. 104Barringer, Felicity 393Barry. E. 76Barsby, Steve L. 230, 231Barsvary, A.K. 164Bartlett, A.A. 77Baugh, E.L. 78Beckman, W.A. 254Belensky, Michael J. 79Bell, R. 136Belotserkovsky, V.I. 453Benedict, Howard 394,395,396Benedict, John T. 3Berest, A.A. 453Berry, Sandra A. 80,81,165,218Black, Norman 398Blades, Sharon L. 240Blaine, R.L. 82Boffey, Philip M. 399Boitsov, V.V. 453Bradsher, Keith 400Brown, Sam E. 4Buchanan, J. 255Buchanan, Robert F. 401Bugler, J.W. 254Bureau, William H. 256Burgan, Jr., W.G. 83Burns, J.E. 84Burykina, E.G. 453Bushkin, S.B. 453Butler, F. 257
Campbell, J.M. 258Campbell, R.A. 258Canavan, M.M. 17,184
82
Carlson, G.F. 260Caspe, Marc S. 261Cetron, M.J. 5,6,166,167Chalabi, A. Fattah 85,262Chernoyarsky, A.A. 453Cherrlngton, John 403Cheshire, Jr., Len P. 188Chesson, Jr., Eugene 276Ciotti, Francine A. 263Clark, Robert L. 86Clark, Roy E. 7,168Coad, W.J. 264Coates, Joseph F. 17,184,185Coella, Michael A. 169Conley, John E. 87,265Cook, Louise 405,406Cooke, Patrick W. 88,89Cooper, P.I. 254Corbett, J.V. 266Corey, J.F. 90Cowen, Robert C. 407Cozine, R.D. 171Crisp, P.B. 91Crutsinger, Martin 409Cuddy, L.M. 92,172Cunningham, B. 267Curtis, Bruce 268Cushen, W. Edward 173
Dann, Richard T. 269,455Davis, Edward M. 141Dawkins, William 410De Bruin, Jerry 8De Ferrari, J. 271Devlin, Dolores C. 460Diamant, R.M.E. 272Dienelt, H. 273Doan, Michael 411Donoho, Thomas E. 94Duffie, J.A. 254Dunkle, R.V. 254Duxbury, R. 95
Egbert, Norman F. 96Eldin, Hamed K. 97,276Ellsworth, H.B. 246Etoe, 0. 277Ettkin, L.P. 278,305
Farnes, Phillip E. 98,99Farrington, F. 273Faulkner, Howard M. 10,11Field, Bradley G. 282Fischer,III, C.F. 283
83
Fong, Diana 284Foote, Mary 177Foss, S.K. 100Frankel, George J. 285,286Franklin, J.A. 164Freed, Kenneth 412Fricke, Thomas E. 287Friesth, E.R. 12Frischman, Bernard Lyon 13
Ganapathy, N. 101Gardiner, S.R.M. 102,103Gardner, Sandra L. 28Garrod, G. 341Gat, Uri 104Gertson, F.P. 105Gilpin, Kenneth N. 413Gilsinn, Judith F. 179Giniger, Henry 414Glaser, P.E. 254Goldman, David T. 104,106,180,289Gonzales, Richard R. 181Goodison, Barry E. 99Gorin, David 107Gossage, S. 108Graham, K.J. 463Granzin, X.L. 109Guist, Althea R. 460Gutmann, Fredrick T. 14,291
Hager. Mary 306Halstead, Bruce B. 188Hamilton, A.B. 21,303Hanley, Charles J. 417Hart, K.C. 292Hasko, Stephen 183Hatschek, R.L. 293Heffernan, Ann P. 147,148,149,158,159,160,161Henderson, Thomas J. 110Hermanson, Roger C. 294Herzog, D.R. 111Hidlay, William C. 418Hilts, Michael E. 16Hitchcock, Henry H. 17,184,185Hitchings, Bradley 295
* Holmgren, J.E. 112Holtz, R.D. 186Horak, Kathy 419,420
* Horigome, T. 254Hornung, William J. 18Howe, E.D. 254slowenstine, E.J. 187Hudson, Arthur J. 113Hunt, Robert P. 188
84
Ilin, V.G. 453Irving, M. 300Isaev, L.K. 453Ito, Cruz 138Ivanov, Y.N. 453Ivlev, A.I. 453
Jackson, Maggie 422Jakuba, Stan R. 19,114Janis, E.J. 115Jerd, Russell F. 20Johnson, A. Ivan 116,117,118,301Johnson, A.B. 313Jones, Jr., Keith W. 190Jones, R.W. 119Joshi, M.N. 302
Kahles, John F. 191Kalmey, Donald L. 120Kao, Antony M. 192Karim, G.A. 21,303Karns, J. 304Keaton, P.N. 278,305Keerdoja, Eileen 306Kemp, L.J. 121Khomyakov, G.D. 453Khusainov, N.M. 453Kilman, Lawrence 423Kind, D. 122King, Lisa L. 193,194Kinney, G.F. 463Klym, T.W. 164Knight, Athelia 424Koster, Allen T. 307Kozlov, A.D. 453Kramer, Larry 425Kraut, B. 308Krebs, John L. 191Kverneland, Knut 0. 22
Lace, J.H. 309Lally, A. 124Lanier, J.L. 195Lawand, T.A. 254Le Blanc, John 24Le Breton, Edmond 426Le Fande, Judith M. 196Leuven, K.U. 324Lewandoski, Edward R. 197,310,311Lightowler, K. 312Lindbeck 25Linse, Robert E. 125Liss, R.B. 313Locker, H.J. 126
85
Losev, B.F. 453Loshak, Lionel 13Lownes, Jay C. 314
MacFarlane, S. 315Mahaffey, Charles T. 26,200,201Mair, A.C. 316Maly, R. 127Mansfield, Stephanie 427Marcelli, R.J. 317Martinek, Antonin 27Mason, J.L. 128Matthews, Michael L. 318,319Mazanek, R. 453McBurney, S.R. 192McFadden, C.F. 5,6,166,167McMahon, J.H. 203Merenstein, Gerald B. 28Messer, T. 320Michaelson, M. 51Michaud, P. 324Miller, William H. 335Milton, Hans J. 52,53,54,55,81,165,210,211,212,213,214,215
215,217,218,336Montgomery, G.F. 151Myers, R.A. 129
Nazaruk, Pamela 437Nettles, M.S. 17,184Newhouse, Eric 438Niccolai, Marino J. 120Nicovich, Philip A. 132,475
O'Hagen, M.E. 133Odom, Jeffrey V. 220,338Olshan, Lisa 188Oxford, Jr., C. 339
Palyza, M.M. 57Parkes. Christopher 439Parkin, R. 340Parnell, R. 341Paul, R.E. 65Paullin, Robert L. 134
Pearson, J.W. 222Peiser, H. Steffen 223Peltersson, Bengt G. 104Peter, F.E. 225Peters, E.B. 5,6,166,167Peters, J. 342Petershack, Victor 385Peterson, Alfred 135Peterson, Ned R. 99Podgruski, T. 453
86
Pohl, Jr., John J. 343Pokorney, Joseph L. 196Port, Otis 344Priestley, C. 345Prillaman, G.H. 17,184
Quasim, S.H. 58Quinn, M.L. 346
Rarick, Keith 385Rasaratnam, Logendran 97Rawl, Richard R. 104Raymer, D.A. 347Reimers, R.M. 136Richards, Robert P. 98,99Rix, R. 348Roat, Candace L. 7,168Robitaille, R. 136Roepcke, L.A. 5,6,166,167Ross, Nancy L. 442Ruby, Lawrence 349Ruff, Paul E. 481Rumbold, A.G. 137Rumpel, F. 350
Saldana, Oscar M. 138Schneider, R. 139Schwartz, A.J. 351Sdianna, Nicola 261Selivanov, P.N. 453Semenko, N.G. 453Sewell, R.G.S. 463Shan, Tse Pui 443Shaw, Jane S. 344Sherperak, Rita 8Short, L.G. 352Shvartsburd, Vladimir 353Siebentritt, Carl 104Simpson, James A. 230,231Smith, Karen Haas 356Smolen, A.M. 357Smyth, D.V. 358Sokol, Louis F. 360,445Sologyan, I.K. 453Souch, G. 140Speers, Douglas D. 141Stanfield, Rochelle L. 361Stepanova, I.V. 453Stillwagon, Woodrow C. 294Stockbridge, J.M. 61Strang, Louis R. 143Strelka, Charles S. 13Stull, N.R. 362Stuller, G. 453
87
Sugarek, S.E. 5,6,166,187Sulzer, Richard 235Sumner, L. 363Sumner, Tim 144Swindells, B. 236
Taft, William H. 237Tarbeev, Y.V. 453Tascher, John M. 238,239,240Taylor, B.N. 241Taylor, Harold L. 145,146Teploukhova, G.A. 453Teresko, J. 365Tholen, Albert D. 147,148,149Thorne, B.J. 278Thorne. E.W. 366Trautman, Robert 447Trowbridge, R. 368Tufts, Thomas Clark 150,389Turnbull, J.E. 151Tutt, Patricia 62
Underwood, Gerry T. 152,370
Van der Mersch, P.L. 254Van Oot, J.G. 153Vanzler, Frank 85,262Vasilash, G.S. 372Vernick, Arnold S. 373Vernon, David F. 154Vesey, Tom 450Vlannes, P.N. 155,244
Wagner, E. 127Wallach, Paul 83Wandmacher, Cornelius 64,156,374Warring, R.H. 375Webber, Steve 245Webber, D.E. 377Werner, L. 453Whelihan, Alan S. 157,248Whiteley, J. 380Whitemore, Jane 306Whitten, Charles A. 381Whyte, W.S. 65Winton, John M. 383Wolff, Ernst 66Wollin, Harold F. 158,159,160,161
Yawn, David 384Yorx, J.W. 385Youngquist, G. 162Yulo, Carlo 247
88
Zeiter, W.E. 386Ziegler, 0. 127Zlatarev. P. 453
89