dinstar config elastix

8/10/2019 Dinstar Config Elastix

1/12

DINSTAR DAG1000-8O with Elastix

Setup Guide

Shenzhen Dinstar Technologies Co., Ltd.

Address: Floor 6, Guoxing Building, Changxing Road, Nanshan District, Shenzhen, China

518057

Telephone: +86 755 2645 6664

Fax: +86 755 2645 6659

Emails: [email protected], [email protected]

Website: www.dinstar.com


2/12

A. Elastix Setup Procedure

To set up the Elastix Server for the DINSTAR DWG2001

A1Go to the web address of the Elastix Server Login page. The web address is determined by

the customer, for this guide we have used the IP address 172.16.33.58

Type the username and password for an administrative user into the Username and Password

fields

A2Press Enter or click on the Submit button to go to Elastixs Dashboard


3/12

A3Once inside, click on the PBX tab on the menu at the top of the screen

A4Click Trunks and Add SIP Trunk menu to create a SIP trunk to DWG. This will take you to

the Add SIP Trunk page.

A5On the Add SIP Trunk page, fill in the following information:

Trunk name (gsmin this example)

Maximum Channels (8 in this example)


4/12

Outgoing settings

Trunk Name (fxo in this example)

Host (172.16.66.7 in this example)

Incoming Settings

Username (10000 in this example)

Secret (aos123 in this example)


5/12

A6Configure outbound route On the Add Outbound Routes page, fill in the following

information:

Route name (fxo in this example)

Set dial rule with prefix 9 in this example


6/12

Then click Submit Changes to save the outbound route

A7Configure inbound route On the Add Inbound Routes page, fill in the following information:

Description (gsm in this example)

DID Number (s in this example)

Configure destination number of inbound route

Destination to IVR / Extension ( extension 8003 in this example)

Then click Submit to save the changes

A8Apply configuration changes


7/12

B. DAG1000-8O Setup Procedure

B1Go to the web address of the DAG1000 Login page. The web address is determined by the

customer, default IP of the gateway is 192.168.11.1, and for this guide we have used the

DAG1000 and IP address 172.16.66.7

Default username: admin, Password: admin

The main page of DAG1000 FXO VoIP Gateway

IP Address ( 172.16.66.7 in this example)

Firmware Version (2.11.08.01 in this example)


8/12

Send email [email protected] to get latest firmware version.

Upgrade firmware on the Maintenance-> Firmware Upload page

Select the firmware file and click Upload button then keep waiting till it reboot automatically.

B2Configure SIP server IP on theSystem Configuration-> SIP Parameter page

SIP Server Address ( 172.16.33.58 in this example)

SIP Server Port ( 5060 in this example)

SIP Register Interval (300s in this example)
mailto:[email protected]:[email protected]


9/12

Click the Save button on the buttom of the page

B3Configure authentication information on the Call Routing-> Port Group

SIP User ID (10000 in this example as configuration of Trunks, Reference A5)

To VoIP Hotline (DID Number s in this example as configuration of Inbound Routes,

reference A7)


10/12

Note: s can be replaced by extensions or other DID number as per configuration of SIP

server. To call to extension/DID number automatically, users must configure To VoIP Hotline as

well as Tel-IP Operation.

B4Configure outbound route on the Call & Routing ->IP_Tel Routingpage

Description (Out in this example)


11/12

B5Configure inbound route on theCall & Routing->Tel-IP Routingpage

Call from(Port Group 0 in this example)

Description (In in this example)

B6 Enable CID on the Advanced-> FXS/FXO page


12/12

Enable One stage dialing

dinstar config elastix

Documents