directory of /files/ - steven engineering · 2004. 6. 23. · electronic horn the edwards 868...
TRANSCRIPT
© Copyright 2004 Edwards
90 F ie lds tone Cour t ||||| Chesh i re , CT 06410P h : 2 0 3 . 6 9 9 . 3 3 0 0 ||||| F x : 2 0 3 . 6 9 9 . 3 1 0 8
www.edwards-s ignals.com
6-27
Edwards®
Backup Alarms
The Edwards 8000 Series heavy duty backup alarms answers all
your needs with its convenient, compact size, rugged housing and
high decibel output. The 8001-EG die-cast alarm automatically
adjusts its output volume to 10 dB above ambient to compensate
for background noise. Range is 87 to 102 dB.
The 8002-EU has an ABS plastic housing and outputs 97 dB. Long
Term reliability is ensured as a result of its durable and versatile
construction. The alarm mounts in the rear of the vehicle with the
sound opening outward into the hazardous area.
Designed for indoor and outdoor application in a wide variety of
vehicles that operated in populated areas. This alarm is perfect for
heavy equipment such as forklifts, bulldozers, graders, tractors,
dump trucks, and waste disposal vehicles as well as emergency
and maintenance vehicles, buses, firetrucks, and general utility
vehicles. The Edwards 8000 Series Backup Alarm is an economical
life-safety device designed to prevent accidents.
8001-EG & 8002-EU
Heavy Duty
HORNS & SIRENS
FEATURES
> Solid state, epoxy-sealedelectronics
8001-EG> Auto Adjusts from 87 - 102dB
> Rugged Weatherproof Die-CastConstruction
8002-EU> 97dB Output
> Rugged Weatherproof ABSPlastic Housing
AGENCY APPROVALS
> Conforms to SAE J994 soundlevel Type C requirements
SPECIFICATIONS
8001-EG> 12 - 24VDC
> 87 - 102 dB rating based on "A"weighted scale (tolerance +/- 4dB)
8002-EU> 12 - 36VDC
> 97dB rating based on "A"weighted scale (tolerance +/- 4dB)
3"(76mm)
4.5"(114mm)
2"(51mm)
Cat. No.8001-EG
Cat. No.8002-EU
D-04
© Copyright 2004 Edwards
90 F ie lds tone Cour t ||||| Chesh i re , CT 06410P h : 2 0 3 . 6 9 9 . 3 3 0 0 ||||| F x : 2 0 3 . 6 9 9 . 3 1 0 8
www.edwards-s ignals.com6-2HORNS & SIRENS
AdaptaHorn®
Electronic Horn
The Edwards 867, 869 and 869D series are low current, high deci-
bel, surface mount, flush or panel mount electronic horns for indoor
use.
The 867 series has been designed for surface mounting with the
gray, corrosion resistant, surface mount box supplied with the unit.
The box measures 5 5/8" (143mm) square by 3 5/16" (84mm) deep.
The 869 and 869D series are designed for flush or panel mounting.
For flush mounting, they mount to a standard 4" (102mm) square
back box with extension ring (total minimum depth of 3" (76mm)).
Back box and extension ring not supplied. For panel mounting, use
only the supplied mounting plate without back box.
The 867 and 869 series electronic horns are designed for use in
corridors and manufacturing sites. It is used wherever a distinctive,
audible signal is required for timing, scheduling, general alarm, and
warning applications.
The 869D is designed for use in fire alarm systems and other appli-
cations requiring electrical supervision of signaling circuit field wir-
ing.
D-0
4
867, 869 & 869D Series
Indoor or Outdoor Surface,Flush or Panel Mount
FEATURES
> 869D diode polarized
> Low current draw
> High dB output
> Terminals for easy wiring
> May be used in outdoorapplications by using with869-WPB weatherproof back box
> 867 Series comes complete withsurface back box
> Gray Flame resistant housing
> Engineered thermoplastichousing
AGENCY APPROVALS
> UL 464 Listed
> 869D cUL Listed C22.2 No. 205
SPECIFICATIONS
> Operating voltage: -20% to +10%of nominal voltage
> Indoor Operating Environment:93% relative humidity at 104ºF(40ºC); 32ºF to 120ºF (0º to 49ºC)variable ambient
HORNS & SIRENS
© Copyright 2004 Edwards
90 F ie lds tone Cour t ||||| Chesh i re , CT 06410P h : 2 0 3 . 6 9 9 . 3 3 0 0 ||||| F x : 2 0 3 . 6 9 9 . 3 1 0 8
www.edwards-s ignals.com
TECHNICAL INFORMATION
6-3D
-04
5 1/2"(140mm)
5 1/2"(140mm)
5/8"(16mm)
3 5/16"(84mm)
Mounting Plate(supplied)
5 5/8"(143mm)
5 5/8"(143mm)
Surface Mounting Box(supplied with 867 Series)
dB atCat. No. Description Volts Amps 10 ft (3.05m)
867-AQ Surface mount 24V AC 60mA 90 dBA (Anechoic chamber)24V DC 20mA
867-N5 Surface mount 120V AC 21mA 90 dBA (Anechoic chamber)
869-AQ Flush or panel mount 24V AC 60mA 90 dBA (Anechoic chamber)24V DC 20mA
869-N5 Flush or panel mount 120V AC 21mA 90 dBA (Anechoic chamber)
869D-G1 Flush or panel mount 24V DC 20mA 98 dBA (Anechoic chamber)Diode Polarized 40mA 102 dBA (Anechoic chamber)
Standard North American4" (102mm) sq. x 1 1/2" (38mm)
deep electrical box with 1 1/2" (38mm)extension ring (not supplied)
Cat. No. 869-WPBWeatherproof BackBox (not supplied)
5 59/64"(150mm)
5 59/64"(150mm)
3 13/32"(87mm)
© Copyright 2004 Edwards
90 F ie lds tone Cour t ||||| Chesh i re , CT 06410P h : 2 0 3 . 6 9 9 . 3 3 0 0 ||||| F x : 2 0 3 . 6 9 9 . 3 1 0 8
www.edwards-s ignals.com6-4HORNS & SIRENS
AdaptaHorn®
Electronic Horn
The Edwards 868 series is a low current, high decibel, weatherproof
surface mount, electronic horn for outdoor or indoor use. It has
been designed for mounting with the supplied weatherproof back
box.
The 868 mounts, using the supplied gasket, to the gray, corrosion
resistant weatherproof surface box supplied with the unit. The box
measures 5 59/64" (150mm) square by 3 13/32" (87mm) deep.
The 868 electronic horn is for indoor and outdoor use wherever a
distinctive, audible signal is required for timing, scheduling, general
alarm, and emergency warning applications.
868 Series
Outdoor Surface Mount
FEATURES
> Low current draw
> High dB output
> Terminals for easy wiring
> Gray Flame resistant housing
> Complete with gasket andweatherproof surface back box
> Engineered thermoplastichousing
AGENCY APPROVALS
> UL 464 Listed
SPECIFICATIONS
> Operating voltage: -20% to +10%of nominal voltage
> Outdoor Operating Environment:98% relative humidity at 104ºF(40ºC); -31ºF to 150ºF (-35º to66ºC) variable ambient
D-0
4
HORNS & SIRENS
© Copyright 2004 Edwards
90 F ie lds tone Cour t ||||| Chesh i re , CT 06410P h : 2 0 3 . 6 9 9 . 3 3 0 0 ||||| F x : 2 0 3 . 6 9 9 . 3 1 0 8
www.edwards-s ignals.com
TECHNICAL INFORMATION
6-5
Weatherproof BackBox (supplied)
5/8"(16mm)
5 59/64"(150mm)
Mounting Plate(supplied)
5 59/64"(150mm)
3 13/32"(87mm)
5 1/2"(140mm)
5 1/2"(140mm)
dB atCat. No. Volts Amps 10 ft (3.05m)
868-AQ 24V AC 60mA 90 dBA (Anechoic chamber)24V DC 20mA
868-N5 120V AC 21mA 90 dBA (Anechoic chamber)
D-04
© Copyright 2004 Edwards
3-11
2VISUAL SIGNALS
90 F ie lds tone Cour t ||||| Chesh i re , CT 06410P h : 2 0 3 . 6 9 9 . 3 3 0 0 ||||| F x : 2 0 3 . 6 9 9 . 3 1 0 8
www.edwards-s ignals.com
The Edwards 868STR AdaptaBeacon series is a bright, low current,
high decibel, surface mount, combination electronic horn/strobe for
indoor or outdoor use. It has been designed for mounting with the
supplied back box. Strobe and horn may be operated independently.
The 868STR mounts to the gray, corrosion resistant weatherproof
surface box supplied with the unit. The box measures 5 59/64"
(150mm) square by 3 13/32" (87mm) deep.
The 868STR AdaptaBeacon is for outdoor wall mounting in
manufacturing sites. Used where a distinctive visual or audible
signal is required for timing, scheduling, paging, process control,
and general alarm applications.
AdaptaBeacon®
Electronic Horn/Strobe
868STR Series
Outdoor, Surface Mount
FEATURES
> Low current draw
> High dB output
> Terminals for easy wiring
> Gray flame resistant housing
> Five lens colors
> 150 candela strobe (clear lens)
> Complete with gasket andweatherproof surface back box
> Engineered thermoplastichousing
> 1,000 hour strobe tube
AGENCY APPROVALS
> Strobe - UL 1638 Listed
Horn - UL 464 Listed
D-0
4
© Copyright 2004 Edwards
TECHNICAL INFORMATION
3-113VISUAL SIGNALS
90 F ie lds tone Cour t ||||| Chesh i re , CT 06410P h : 2 0 3 . 6 9 9 . 3 3 0 0 ||||| F x : 2 0 3 . 6 9 9 . 3 1 0 8
www.edwards-s ignals.com
CatalogNumber 868STR(*)-N5 868STR(*)-AQ
Operating Voltage** 120V AC 24V AC 24V DCOperating Current - Horn*** 21 mA 60 mA 20 mAOperating Current - Strobe*** 90 mA (RMS) 158 mA (RMS) 219 mA (AVG)Operating Environment Indoor: 85% relative humidity at 86F (30C); 32F to 120F (0 to 49C) variable ambient
Outdoor: 95% relative humidity at 86F (30C); -31F to 150F (-35C to 66C) variable ambientStrobe Flash Rate 1 flash per secondSound Level Output 90 dBA at 10 ft. (3.05 m) in an Anechoic ChamberMounting Outdoor Surface MountLight Output Clear Lens - 150 cd
UL 1638 Amber Lens - 90 cdGreen Lens - 70 cdRed Lens - 21 cdBlue Lens - 20 cd
*Insert lens color: C - clear, R - red, G - green, B - blue or A - amber**Operating voltage: -20% to +10% of nominal voltage***Horn and strobe currents are additive when connected in parallel.
5/8"(16mm)
5 59/64"(150mm)
Mounting Plate(supplied)
5 59/64"(150mm)
3 13/32"(87mm)
5 1/2"(140mm)
5 1/2"(140mm)
WeatherproofSurface Box
(supplied)
D-04
© Copyright 2002 Edwards
3-10
2VISUAL SIGNALS
90 F i e lds tone Cour t ||||| Chesh i r e , CT 06410P h : 2 0 3 . 6 9 9 . 3 3 0 0 ||||| F x : 2 0 3 . 6 9 9 . 3 1 0 8
www.edwards-s ignals.com
The Edwards 868STR AdaptaBeacon series is a bright, low current,
high decibel, surface mount, combination electronic horn/strobe for
indoor or outdoor use. It has been designed for mounting with the
supplied back box. Strobe and horn may be operated independently.
The 868STR mounts to the gray, corrosion resistant weatherproof
surface box supplied with the unit. The box measures 5 59/64"
(150mm) square by 3 13/32" (87mm) deep.
The 868STR AdaptaBeacon is for outdoor wall mounting in
manufacturing sites. Used where a distinctive visual or audible
signal is required for timing, scheduling, paging, process control,
and general alarm applications.
AdaptaBeacon®
Electronic Horn/Strobe
868STR Series
Outdoor, Surface Mount
FEATURES
> Low current draw
> High dB output
> Terminals for easy wiring
> Gray flame resistant housing
> Five lens colors
> 150 candela strobe (clear lens)
> Complete with gasket andweatherproof surface back box
> Engineered thermoplastichousing
> 1,000 hour strobe tube
AGENCY APPROVALS
> Strobe - UL 1638 Listed
Horn - UL 464 Listed
D-0
02
© Copyright 2002 Edwards
TECHNICAL INFORMATION
3-103VISUAL SIGNALS
90 F i e lds tone Cour t ||||| Chesh i r e , CT 06410P h : 2 0 3 . 6 9 9 . 3 3 0 0 ||||| F x : 2 0 3 . 6 9 9 . 3 1 0 8
www.edwards-s ignals.com
CatalogNumber 868STR(*)-N5 868STR(*)-AQ
Operating Voltage** 120V AC 24V AC 24V DCOperating Current - Horn*** 21 mA 60 mA 20 mAOperating Current - Strobe*** 90 mA (RMS) 158 mA (RMS) 219 mA (AVG)Operating Environment Indoor: 85% relative humidity at 86F (30C); 32F to 120F (0 to 49C) variable ambient
Outdoor: 95% relative humidity at 86F (30C); -31F to 150F (-35C to 66C) variable ambientStrobe Flash Rate 1 flash per secondSound Level Output 90 dBA at 10 ft. (3.05 m) in an Anechoic ChamberMounting Indoor Surface MountLight Output Clear Lens - 150 cd
UL 1638 Amber Lens - 90 cdGreen Lens - 70 cdRed Lens - 21 cdBlue Lens - 20 cd
*Insert lens color: C - clear, R - red, G - green, B - blue or A - amber**Operating voltage: -20% to +10% of nominal voltage***Horn and strobe currents are additive when connected in parallel.
5/8"(16mm)
5 59/64"(150mm)
Mounting Plate(supplied)
5 59/64"(150mm)
3 13/32"(87mm)
5 1/2"(140mm)
5 1/2"(140mm)
WeatherproofSurface Box
(supplied)
D-002
© Copyright 2004 Edwards
3-11
4VISUAL SIGNALS
90 F ie lds tone Cour t ||||| Chesh i re , CT 06410P h : 2 0 3 . 6 9 9 . 3 3 0 0 ||||| F x : 2 0 3 . 6 9 9 . 3 1 0 8
www.edwards-s ignals.com
The Edwards 869STR and 869DSTR AdaptaBeacon series are
bright, low current, high decibel, surface mount, combination
electronic horn/strobes for indoor, flush mount use. They have been
designed for mounting in a standard 4" (102mm) square backbox
with extension ring (total minimum depth of 3" (76mm)) (not
supplied). Strobe and horn may be operated independently.
The 869DSTR-G1 is a diode polarized 24V DC unit.
The 869STR AdaptaBeacon is for indoor flush mounting in
manufacturing sites. Used where a distinctive visual or audible
signal is required for timing, scheduling, paging, process control,
and general alarm applications.
AdaptaBeacon®
Electronic Horn/Strobe
869STR & 869DSTR
Indoor, Flush Mount
FEATURES
> Low current draw
> High dB output
> Terminals for easy wiring
> Gray flame resistant housing
> Five lens colors
> 150 candela strobe (clear lens)
> Diode polarized units available
> Engineered thermoplastichousing
> 1,000 hour strobe tube
AGENCY APPROVALS
> Strobe - UL 1638 Listed
Horn - UL 464 Listed
D-0
4
© Copyright 2004 Edwards
TECHNICAL INFORMATION
3-115VISUAL SIGNALS
90 F ie lds tone Cour t ||||| Chesh i re , CT 06410P h : 2 0 3 . 6 9 9 . 3 3 0 0 ||||| F x : 2 0 3 . 6 9 9 . 3 1 0 8
www.edwards-s ignals.com
CatalogNumber 869STR(*)-N5† 869STR(*)-AQ†
Operating Voltage** 120V AC 24V AC 24V DCOperating Current - Horn*** 21 mA 60 mA 20 mAOperating Current - Strobe*** 90 mA 158 mA 219 mAOperating Environment Indoor: 85% relative humidity at 86F (30C); 32F to 120F (0 to 49C) variable ambientStrobe Flash Rate 1 flash per secondSound Level Output 90 dBA at 10 ft. (3.05 m) in an Anechoic ChamberMounting Indoor Surface MountLight Output Clear Lens - 150 cd
UL 1638 Amber Lens - 90 cdGreen Lens - 70 cdRed Lens - 21 cdBlue Lens - 20 cd
*Insert lens color: C - clear, R - red, G - green, B - blue or A - amber**Operating voltage: -20% to +10% of nominal voltage***Horn and strobe currents are additive when connected in parallel.†Diode polarized units available in 24V DC. Order 869DSTR(*)-G1.
5 1/2"(140mm)
5 1/2"(140mm)
5/8"(16mm)
Mounting Plate(supplied)
Standard North American4" (102mm) sq. x 1 1/2" (38mm)deep electrical box with 1 1/2" (38mm)extension ring (not supplied)
D-04
© Copyright 2002 Edwards
3-10
4VISUAL SIGNALS
90 F i e lds tone Cour t ||||| Chesh i r e , CT 06410P h : 2 0 3 . 6 9 9 . 3 3 0 0 ||||| F x : 2 0 3 . 6 9 9 . 3 1 0 8
www.edwards-s ignals.com
The Edwards 869STR and 869DSTR AdaptaBeacon series are
bright, low current, high decibel, surface mount, combination
electronic horn/strobes for indoor, flush mount use. They have been
designed for mounting in a standard 4" (102mm) square backbox
with extension ring (total minimum depth of 3" (76mm)) (not
supplied). Strobe and horn may be operated independently.
The 869DSTR-G1 is a diode supervised 24V DC unit.
The 869STR AdaptaBeacon is for indoor flush mounting in
manufacturing sites. Used where a distinctive visual or audible
signal is required for timing, scheduling, paging, process control,
and general alarm applications.
AdaptaBeacon®
Electronic Horn/Strobe
869STR & 869DSTR
Indoor, Flush Mount
FEATURES
> Low current draw
> High dB output
> Terminals for easy wiring
> Gray flame resistant housing
> Five lens colors
> 150 candela strobe (clear lens)
> Diode polarized units available
> Engineered thermoplastichousing
> 1,000 hour strobe tube
AGENCY APPROVALS
> Strobe - UL 1638 Listed
Horn - UL 464 Listed
D-0
02
© Copyright 2002 Edwards
TECHNICAL INFORMATION
3-105VISUAL SIGNALS
90 F i e lds tone Cour t ||||| Chesh i r e , CT 06410P h : 2 0 3 . 6 9 9 . 3 3 0 0 ||||| F x : 2 0 3 . 6 9 9 . 3 1 0 8
www.edwards-s ignals.com
CatalogNumber 869STR(*)-N5† 869STR(*)-AQ†
Operating Voltage** 120V AC 24V AC 24V DCOperating Current - Horn*** 21 mA 60 mA 20 mAOperating Current - Strobe*** 90 mA 158 mA 219 mAOperating Environment Indoor: 85% relative humidity at 86F (30C); 32F to 120F (0 to 49C) variable ambientStrobe Flash Rate 1 flash per secondSound Level Output 90 dBA at 10 ft. (3.05 m) in an Anechoic ChamberMounting Indoor Surface MountLight Output Clear Lens - 150 cd
UL 1638 Amber Lens - 90 cdGreen Lens - 70 cdRed Lens - 21 cdBlue Lens - 20 cd
*Insert lens color: C - clear, R - red, G - green, B - blue or A - amber**Operating voltage: -20% to +10% of nominal voltage***Horn and strobe currents are additive when connected in parallel.†Diode Supervised units available in 24V DC. Order 869DSTR(*)-G1.
5 1/2"(140mm)
5 1/2"(140mm)
5/8"(16mm)
Mounting Plate(supplied)
Standard North American4" (102mm) sq. x 1 1/2" (38mm)deep electrical box with 1 1/2" (38mm)extension ring (not supplied)
D-002
© Copyright 2004 Edwards
90 F ie lds tone Cour t ||||| Chesh i re , CT 06410P h : 2 0 3 . 6 9 9 . 3 3 0 0 ||||| F x : 2 0 3 . 6 9 9 . 3 1 0 8
www.edwards-s ignals.com6-6HORNS & SIRENS
The Edwards 870 AC & 871 DC Series are low-current, high decibel
flush mount vibrating horns for heavy-duty use. It has been de-
signed for wall or panel installation and projects less than 1"
(25mm) from the mounting surface. Supplied complete with trim
plate.
Designed for indoor installation. Horn mounts in Catalog No. 870-B
back box (ordered separately).
Applications include ceiling and wall mounting in corridors and
manufacturing sites. Also, ideal for scoreboards. Used wherever a
distinctive, urgent signal is required for timing, scheduling, paging,
general alarm, and warning.
AdaptaHorn® FlushMount Vibrating Horn
FEATURES
> PLC compatible models
> Corrosion resistant finish
> Volume adjustable
> Completely assembled
AGENCY APPROVALS
> UL Listed
> FM Approved (870 Series)
SPECIFICATIONS
> Operating range: -20% to +10%of nominal voltage
> Heavy duty die-cast housing
870 AC Series
> Adjustable output: 78 to 103 dB
> 400 hour rating at 50% duty cycle
871 DC Series
> Adjustable output: 78 to 101 dB
> 200 hour rating
870 & 871 Series
Indoor Applications
872-PO Plastic Projector
AdaptaHorn Accessory
Plastic projector snaps onto any
AdaptaHorn. Available as separate item.
D-0
4
HORNS & SIRENS
© Copyright 2004 Edwards
90 F ie lds tone Cour t ||||| Chesh i re , CT 06410P h : 2 0 3 . 6 9 9 . 3 3 0 0 ||||| F x : 2 0 3 . 6 9 9 . 3 1 0 8
www.edwards-s ignals.com
TECHNICAL INFORMATION
6-7
4 1/2"(114mm)
6 1/2"(165mm)
11/16"(17mm)
2 1/4"(57mm)Volume adjustment set screw
1/16" (2mm) allen wrench supplied
DC coil dB atCat. No. Volts Amps V A Res. (Ohms) 10 Ft.
870-G5 24V AC .63 15.1 5.2870-N5† 120V AC .13 15.6 150 103870-R5 240V AC .07 16.8 580
871-E1 12V DC .27 3.2 6.0871-G1 24V DC .16 3.8 24 101871-K1 48V DC .07 3.4 96871-P1 125V DC .025 3.1 600871-S1 250V DC .014 3.5 2640
† Diode Polarized version available in red, order 880D-N5.
*This device is PLC compatible and may be operated by PLCs with output characteristics that match the input load requirements of this signal.
Electromechanical devices can produce transient spikes and should only be used on PLC output cards that have inherent transient spike suppres-sion. Consult the PLC manufacturer prior to connecting 24V DC electromechanical devices to PLCs.
PLC COMPATIBILITY - SIGNAL INPUT LOAD CHARACTERISTICS*Operating Max. off state Continuous on Surge voltage leakage current current (inrush/duration)
Cat. No. Volts mA mA Amps/milliseconds
870-N5 120V AC 60 Hz 25 120 1.02/.000026
871-G1 24V DC 25 150 1.7/.000042
D-04
© Copyright 2004 Edwards
90 F ie lds tone Cour t ||||| Chesh i re , CT 06410P h : 2 0 3 . 6 9 9 . 3 3 0 0 ||||| F x : 2 0 3 . 6 9 9 . 3 1 0 8
www.edwards-s ignals.com6-8HORNS & SIRENS
The Edwards 870P AC & 871P DC Series are low-current, high
decibel panel mount vibrating horns for heavy-duty use. Supplied
complete with gasket and UL listed to NEMA 4X enclosure require-
ments.
Designed for semi-flush panel mounting, using supplied mounting
template, or installation on a 4" (102mm) square box. For NEMA
4X installation, mount to a NEMA 4X enclosure having a flat,
smooth surface using supplied 1/8" (3mm) gasket in accordance
with the installation instructions provided with the unit.
Applications include use in panel boards and switchboards wher-
ever a distinctive, urgent signal is required for timing, general alarm
& warning.
AdaptaHorn® PanelMount Vibrating Horn
870P & 871P Series
NEMA Type 4X
FEATURES
> PLC compatible models
> Corrosion resistant finish
> Volume adjustable
> Completely assembled
> NEMA Type 4X rated
AGENCY APPROVALS
> UL Listed
SPECIFICATIONS
> Operating range: -20% to +10%of nominal voltage
> Heavy duty die-cast housing
> 18" (457mm) wire with molexconnector
870P AC Series
> Adjustable output: 78 to 103 dB
> 400 hour rating at 50% duty cycle
871P DC Series
> Adjustable output: 78 to 101 dB
> 200 hour rating
872-PO Plastic Projector
AdaptaHorn Accessory
Plastic projector snaps onto any
AdaptaHorn. Available as separate item.
D-0
4
HORNS & SIRENS
© Copyright 2004 Edwards
90 F ie lds tone Cour t ||||| Chesh i re , CT 06410P h : 2 0 3 . 6 9 9 . 3 3 0 0 ||||| F x : 2 0 3 . 6 9 9 . 3 1 0 8
www.edwards-s ignals.com
TECHNICAL INFORMATION
6-9
4 5/8"(117mm)
3 1/2"(89mm)
1 7/8"(48mm)
1"(25mm)Volume adjustment set screw
1/16" (2mm) allen wrench supplied
DC coil dB atCat. No. Volts Amps V A Res. (Ohms) 10 Ft.
870P-E5 12V AC 1.25 15.0 1.5870P-G5 24V AC 0.63 15.1 5.2 103870P-N5 120V AC 0.13 15.6 150870P-R5 240V AC 0.07 16.8 580
871P-C1 6V DC 0.7 4.2 1.4871P-E1 12V DC 0.27 3.2 6871P-G1 24V DC 0.16 3.8 24 101871P-J1 32V DC 0.11 3.52 40871P-P1 125V DC 0.025 3.1 600871P-S1 250V DC 0.014 3.5 2640
*This device is PLC compatible and may be operated by PLCs with output characteristics that match the input load requirements of this signal.
Electromechanical devices can produce transient spikes and should only be used on PLC output cards that have inherent transient spike suppres-sion. Consult the PLC manufacturer prior to connecting 24V DC electromechanical devices to PLCs.
PLC COMPATIBILITY - SIGNAL INPUT LOAD CHARACTERISTICS*Operating Max. off state Continuous on Surge voltage leakage current current (inrush/duration)
Cat. No. Volts mA mA Amps/milliseconds
870P-N5 120V AC 25 120 1.02/.000026
871P-G1 24V DC 25 150 1.7/.000042
D-04
© Copyright 2004 Edwards
90 F ie lds tone Cour t ||||| Chesh i re , CT 06410P h : 2 0 3 . 6 9 9 . 3 3 0 0 ||||| F x : 2 0 3 . 6 9 9 . 3 1 0 8
www.edwards-s ignals.com6-10HORNS & SIRENS
The Edwards 872 AC & 873 DC Series are low-current, high decibel
single projector vibrating horn for heavy-duty use. The single pro-
jector is designed to channel sound in one direction without decibel
loss. Supplied complete with Adaptaplate® for easy installation.
Supplied Adataplate allows quick plug-in connection. Horn simply
plugs into receptacle on mounting plate. Also mounts on any single
gang, 3 1/4" (83mm), 3 1/2" (89mm), 4" (102mm) octagon, or 4"
(102mm) square box.
Used in industrial, commercial, and institutional applications for tim-
ing, paging, and alarm signaling.
AdaptaHorn® SingleProjector Vibrating HornIndoor Applications
FEATURES
> PLC compatible models
> Corrosion resistant finish
> Volume adjustable
> Completely assembled
AGENCY APPROVALS
> UL Listed
> FM Approved (872 Series)
SPECIFICATIONS
> Operating range: -20% to +10%of nominal voltage
> Heavy duty die-cast housing
872 AC Series
> Adjustable output: 78 to 103 dB
> 400 hour rating at 50% duty cycle
873 DC Series
> Adjustable output: 78 to 101 dB
> 200 hour rating
872 & 873 Series
D-0
4
HORNS & SIRENS
© Copyright 2004 Edwards
90 F ie lds tone Cour t ||||| Chesh i re , CT 06410P h : 2 0 3 . 6 9 9 . 3 3 0 0 ||||| F x : 2 0 3 . 6 9 9 . 3 1 0 8
www.edwards-s ignals.com
TECHNICAL INFORMATION
6-11
5"(127mm)
Volume adjustment set screw1/16" (2mm) allen wrench
supplied
7 1/2"(191mm)
4 1/2"(114mm)
1/2"(13mm)
DC coil dB atCat. No. Volts Amps V A Res. (Ohms) 10 Ft.
872-E5 12V AC 1.25 15.0 1.5872-G5 24V AC .63 15.1 5.2 103872-N5† 120V AC .13 15.6 150872-R5 240V AC .07 16.8 580
873-G1 24V DC .16 3.8 24873-K1 48V DC .07 3.4 96 101873-P1 125V DC .025 3.1 600873-S1 250V DC .014 3.5 2640
† Diode polarized version available in red, order 882D-N5.
*This device is PLC compatible and may be operated by PLCs with output characteristics that match the input load requirements of this signal.
Electromechanical devices can produce transient spikes and should only be used on PLC output cards that have inherent transient spike suppres-sion. Consult the PLC manufacturer prior to connecting 24V DC electromechanical devices to PLCs.
PLC COMPATIBILITY - SIGNAL INPUT LOAD CHARACTERISTICS*Operating Max. off state Continuous on Surge voltage leakage current current (inrush/duration)
Cat. No. Volts mA mA Amps/milliseconds
872-N5 120V AC 25 120 1.02/.000026
873-G1 24V DC 25 150 1.7/.000042
D-04
© Copyright 2004 Edwards
90 F ie lds tone Cour t ||||| Chesh i re , CT 06410P h : 2 0 3 . 6 9 9 . 3 3 0 0 ||||| F x : 2 0 3 . 6 9 9 . 3 1 0 8
www.edwards-s ignals.com6-12HORNS & SIRENS
The Edwards 872DPO AC & 873DPO DC Series are low-current,
high decibel double projector vibrating horns for heavy-duty use.
The double projector is designed for bi-directional signaling without
decibel loss. Supplied complete with Adaptaplate® for easy installa-
tion.
Supplied Adataplate allows quick plug-in connection. Horn simply
plugs into receptacle on mounting plate. Also mounts on any single
gang, 3 1/4" (83mm), 3 1/2" (89mm), 4" (102mm) octagon, or 4"
(102mm) square box.
Used in industrial, commercial, and institutional applications for tim-
ing, paging, and alarm signaling. Typical applications include signal-
ing equipment malfunction, security, and employee communication.
AdaptaHorn® DoubleProjector Vibrating Horn
FEATURES
> PLC compatible models
> Corrosion resistant finish
> Volume adjustable
> Completely assembled
AGENCY APPROVALS
> UL Listed
> FM Approved (872DPO Series)
SPECIFICATIONS
> Operating range: -20% to +10%of nominal voltage
> Heavy duty die-cast housing
872DPO AC Series
> Adjustable output: 78 to 101 dB
> 400 hour rating at 50% duty cycle
873DPO DC Series
> Adjustable output: 78 to 99 dB
> 200 hour rating
872DPO & 873DPO Series
Indoor Applications
D-0
4
HORNS & SIRENS
© Copyright 2004 Edwards
90 F ie lds tone Cour t ||||| Chesh i re , CT 06410P h : 2 0 3 . 6 9 9 . 3 3 0 0 ||||| F x : 2 0 3 . 6 9 9 . 3 1 0 8
www.edwards-s ignals.com
TECHNICAL INFORMATION
6-13
11"(297mm)
4"(102mm)
1/2"(13mm)
5"(127mm)
6 1/8"(156mm)
DC coil dB atCat. No. Volts Amps V A Res. (Ohms) 10 Ft.
872DPO-G5 24V AC .63 15.1 5.2872DPO-N5 120V AC .13 15.6 150 101872DPO-R5 240V AC .07 16.8 580
873DPO-E1 12V DC .27 3.2 6873DPO-G1 24V DC .16 3.8 24873DPO-J1 32V DC .13 4.2 40 99873DPO-P1 125V DC .025 3.1 600873DPO-S1 250V DC .014 3.5 2640
*This device is PLC compatible and may be operated by PLCs with output characteristics that match the input load requirements of this signal.
Electromechanical devices can produce transient spikes and should only be used on PLC output cards that have inherent transient spike suppres-sion. Consult the PLC manufacturer prior to connecting 24V DC electromechanical devices to PLCs.
PLC COMPATIBILITY - SIGNAL INPUT LOAD CHARACTERISTICS*Operating Max. off state Continuous on Surge voltage leakage current current (inrush/duration)
Cat. No. Volts mA mA Amps/milliseconds
872DPO-N5 120V AC 25 120 1.02/.000026
873DPO-G1 24V DC 25 150 1.7/.000042
D-04
© Copyright 2004 Edwards
90 F ie lds tone Cour t ||||| Chesh i re , CT 06410P h : 2 0 3 . 6 9 9 . 3 3 0 0 ||||| F x : 2 0 3 . 6 9 9 . 3 1 0 8
www.edwards-s ignals.com6-14HORNS & SIRENS
The Edwards 874AC & 875 DC Series are low-current, high decibel
surface mount vibrating horns for heavy-duty use. Supplied com-
plete with Adaptaplate® for easy installation.
Supplied Adataplate allows quick plug-in connection. Horn simply
plugs into receptacle on mounting plate. Also mounts on any single
gang, 3 1/4" (83mm), 3 1/2" (89mm), 4" (102mm) octagon, or 4"
(102mm) square box.
Used in industrial, commercial, and institutional applications for tim-
ing, paging, and alarm signaling. Applications include equipment
malfunction alert and security warning.
AdaptaHorn® Grille TypeVibrating Horn
FEATURES
> PLC compatible models
> Corrosion resistant finish
> Volume adjustable
> Completely assembled
AGENCY APPROVALS
> UL Listed
> FM Approved (874 Series)
SPECIFICATIONS
> Operating range: -20% to +10%of nominal voltage
> Heavy duty die-cast housing
> Projects only 2" (51mm) frommounting surface
874 AC Series
> Adjustable output: 78 to 103 dB
> 400 hour rating at 50% duty cycle
875 DC Series
> Adjustable output: 78 to 101 dB
> 200 hour rating
874 & 875 Series
Indoor Applications
872-PO Plastic Projector
AdaptaHorn Accessory
Plastic projector snaps onto any
AdaptaHorn. Available as separate item.
D-0
4
HORNS & SIRENS
© Copyright 2004 Edwards
90 F ie lds tone Cour t ||||| Chesh i re , CT 06410P h : 2 0 3 . 6 9 9 . 3 3 0 0 ||||| F x : 2 0 3 . 6 9 9 . 3 1 0 8
www.edwards-s ignals.com
TECHNICAL INFORMATION
6-15
5"(127mm)
4 1/4"(108mm)
2 1/8"(54mm)
1/2"(13mm)
Volume adjustment set screw1/16" (2mm) allen wrench supplied
DC coil dB atCat. No. Volts Amps V A Res. (Ohms) 10 Ft.
874-E5 12V AC 1.25 15.0 1.5874-G5 24V AC .63 15.1 5.2 103874-N5† 120V AC .13 15.6 150874-R5 240V AC .06 14.4 580
875-C1 6V DC 0.70 4.2 1.6875-E1 12V DC 0.27 3.2 6875-G1 24V DC 0.16 3.8 24 101875-P1 125V DC 0.025 3.1 600875-S1 250V DC 0.014 3.5 2640
† Diode polarized version available in red. Order 884D-N5
*This device is PLC compatible and may be operated by PLCs with output characteristics that match the input load requirements of this signal.
Electromechanical devices can produce transient spikes and should only be used on PLC output cards that have inherent transient spike suppres-sion. Consult the PLC manufacturer prior to connecting 24V DC electromechanical devices to PLCs.
PLC COMPATIBILITY - SIGNAL INPUT LOAD CHARACTERISTICS*Operating Max. off state Continuous on Surge voltage leakage current current (inrush/duration)
Cat. No. Volts mA mA Amps/milliseconds
874-N5 120V AC 25 120 1.02/.000026
875-G1 24V DC 25 150 1.7/.000042
D-04
© Copyright 2004 Edwards
90 F ie lds tone Cour t ||||| Chesh i re , CT 06410P h : 2 0 3 . 6 9 9 . 3 3 0 0 ||||| F x : 2 0 3 . 6 9 9 . 3 1 0 8
www.edwards-s ignals.com6-16HORNS & SIRENS
The Edwards 876 AC & 877 DC Series are low-current, high deci-
bel, vibrating horns for heavy-duty use and is UL listed to NEMA 4X
enclosure requirements. The die-cast weatherproof box has a du-
rable, corrosion resistant, electrostatic heat flowed powder epoxy
gray finish. May be used for indoor applications.
Mount on conduit or to any flat surface. A hole on the top has been
drilled and tapped for 3/4" (19mm) - 14 NPT conduit. Knockouts are
located on the bottom and rear of the unit.
Used where a distinctive, urgent signal is required for outdoor or
weatherproof requirements such as: timing scheduling, paging, gen-
eral alarm, personnel warning, and emergency evacuations.
AdaptaHorn® Grille TypeVibrating Horn
FEATURES
> PLC compatible models
> Convenient plug-in assembly
> Corrosion resistant finish
> Completely assembled
> Volume adjustable
> NEMA 4X enclosure
AGENCY APPROVALS
> UL Listed
> FM Approved
SPECIFICATIONS
> Operating range: -20% to +10%of nominal voltage
876 AC Series
> Adjustable output: 78 to 103 dB
> 400 hour rating at 50% duty cycle
877 DC Series
> Adjustable output: 78 to 101 dB
> 200 hour rating
876 & 877 Series
Weatherproof, NEMA Type 4X
872-PO Plastic Projector
AdaptaHorn Accessory
Plastic projector snaps onto any
AdaptaHorn. Available as separate item.
D-0
4
HORNS & SIRENS
© Copyright 2004 Edwards
90 F ie lds tone Cour t ||||| Chesh i re , CT 06410P h : 2 0 3 . 6 9 9 . 3 3 0 0 ||||| F x : 2 0 3 . 6 9 9 . 3 1 0 8
www.edwards-s ignals.com
TECHNICAL INFORMATION
6-17
4 7/8"(124mm)
Volume adjustment set screw1/16" (2mm) allen wrench supplied
3 5/16"(84mm)
DC coil dB atCat. No. Volts Amps V A Res. (Ohms) 10 Ft.
876-E5 12V AC 1.25 15 1.5876-G5 24V AC .63 15.1 5.2 103876-N5† 120V AC .13 15.6 150876-R5 240V AC .07 16.8 580
877-E1 12V DC .27 3.2 6877-G1 24V DC .16 3.8 24877-J1 32V DC .13 4.2 40 101877-K1 48V DC .07 3.5 96877-P1 125V DC .025 3.1 600
† Diode polarized version available in red. Order 886D-N5
*This device is PLC compatible and may be operated by PLCs with output characteristics that match the input load requirements of this signal.
Electromechanical devices can produce transient spikes and should only be used on PLC output cards that have inherent transient spike suppres-sion. Consult the PLC manufacturer prior to connecting 24V DC electromechanical devices to PLCs.
PLC COMPATIBILITY - SIGNAL INPUT LOAD CHARACTERISTICS*Operating Max. off state Continuous on Surge voltage leakage current current (inrush/duration)
Cat. No. Volts mA mA Amps/milliseconds
876-N5 120V AC 25 120 1.02/.000026
877-G1 24V DC 25 150 1.7/.000042
D-04
© Copyright 2004 Edwards
90 F ie lds tone Cour t ||||| Chesh i re , CT 06410P h : 2 0 3 . 6 9 9 . 3 3 0 0 ||||| F x : 2 0 3 . 6 9 9 . 3 1 0 8
www.edwards-s ignals.com6-20HORNS & SIRENS
The Edwards 878DEX AC & 879DEX DC Series are diode
polarized, heavy-duty, high decibel, vibrating horn signals. They
are intended for use in hazardous locations requiring electrical
supervision of signaling circuit field wiring. May also be used for
unsupervised signaling applications.
Two mounting brackets are provided on either side of the unit for
wall mounting. The housing is tapped on one side for 3/4" (19mm)
conduit to allow for field wiring installation.
For use in dusty, hazardous atmospheres where a distinctive,
urgent signal is required. Typical applications include use in mines,
petroleum plants, gas plants, grain elevators, flour mills, paper
mills, textile plants and tankers.
FEATURES
> Diode polarized
> Corrosion resistant heat flowedepoxy finish
> Low current drain
AGENCY APPROVALS
> UL Listed for Class I, Division 1and 2, Groups B, C, and D; ClassII, Division 1 and 2, Groups E, F,and G; and Class III locations
> UL Listed for outdoor locations
> NEMA Type 4X Rated(Outdoor Type 4x applies togeneral signaling use in non-firealarm applications)
> CSA version available
SPECIFICATIONS
> Wide operating voltage range-20% to +10% of nominal voltage
> Power connection wiresembedded in sealing compound
878DEX & 879DEX Series
AdaptaHorn® Grille TypeHazardous Location HornDiode Polarized,Outdoor Rated, NEMA Type 4X
D-0
4
HORNS & SIRENS
© Copyright 2004 Edwards
90 F ie lds tone Cour t ||||| Chesh i re , CT 06410P h : 2 0 3 . 6 9 9 . 3 3 0 0 ||||| F x : 2 0 3 . 6 9 9 . 3 1 0 8
www.edwards-s ignals.com
TECHNICAL INFORMATION
6-21
Markmounting
holes
(2) Mounting bracketsfor 3/8" (10mm) diameter
maximum fasteners
Explosion-proof conduitoutlet box (not supplied)
3/4" (19mm) conduit(not supplied)
7 3/8"± 1/8"(187mm ± 3mm)
2 1/4"(57mm)
6 1/2"(165mm)
4 3/16"(106mm)
7 5/8"(194mm)
3/4" (19mm)14NPT nipple
DC coil dB atCat. No. Volts Amps V A Res. (Ohms) 10 Ft.
878DEX-N5 120V AC 0.13 15.6 150.0 97
879DEX-G1† 24V DC 0.16 3.8 20.0 97
† Diode polarized version available in red. Order 889D-AW
D-04
© Copyright 2004 Edwards
90 F ie lds tone Cour t ||||| Chesh i re , CT 06410P h : 2 0 3 . 6 9 9 . 3 3 0 0 ||||| F x : 2 0 3 . 6 9 9 . 3 1 0 8
www.edwards-s ignals.com6-18HORNS & SIRENS
The Edwards 878EX AC & 879EX DC Series are heavy-duty, high
decibel, vibrating horn signals designed for use in hazardous loca-
tions.
Two mounting brackets are provided on either side of the unit for
wall mounting. The housing is tapped on one side for 3/4" (19mm)
conduit to allow for field wiring installation.
For use in dusty, hazardous atmospheres where a distinctive, ur-
gent signal is required for timing, scheduling, paging and general
alarm applications. Typical applications include use in mines, petro-
leum plants, gas plants, grain elevators, flour mills, paper mills, tex-
tile plants and tankers.
AdaptaHorn® Grille TypeHazardous Location Horn
FEATURES
> Corrosion resistant heat flowedepoxy finish
> Low current drain
AGENCY APPROVALS
> UL Listed for Class I, Division 1and 2, Groups B, C, and D; ClassII, Division 1 and 2, Groups E, F,and G; and Class III locations
> UL Listed for outdoor locations
> NEMA Type 4X Rated
SPECIFICATIONS
> Wide operating voltage range-20% to +10% of nominal voltage
> Power connection wiresembedded in sealing compound
878EX & 879EX Series
Outdoor Rated, NEMA Type 4X
D-0
4
HORNS & SIRENS
© Copyright 2004 Edwards
90 F ie lds tone Cour t ||||| Chesh i re , CT 06410P h : 2 0 3 . 6 9 9 . 3 3 0 0 ||||| F x : 2 0 3 . 6 9 9 . 3 1 0 8
www.edwards-s ignals.com
TECHNICAL INFORMATION
6-19
Markmounting
holes
(2) Mounting bracketsfor 3/8" (10mm) diameter
maximum fasteners
Explosion-proof conduitoutlet box (not supplied)
3/4" (19mm) conduit(not supplied)
7 3/8"± 1/8"(187mm ± 3mm)
2 1/4"(57mm)
6 1/2"(165mm)
4 3/16"(106mm)
7 5/8"(194mm)
3/4" (19mm)14NPT nipple
DC coil dB atCat. No. Volts Amps V A Res. (Ohms) 10 Ft.
878EX-E5 12V 50/60 Hz 1.25 15 1.45878EX-G5 24V 50/60 Hz 0.625 15 5.2 97878EX-N5 120V 50/60 Hz 0.13 15 150.0878EX-R5 240V 50/60 Hz 0.065 15.6 580.0
879EX-C1 6V DC 0.70 4.2 1.4879EX-E1 12V DC 0.27 3.2 6.0879EX-G1 24V DC 0.16 3.8 24.0879EX-J1 32V DC 0.13 3.2 40.0 97879EX-K1 48V DC 0.07 3.4 96.0879EX-P1 125V DC 0.025 3.1 600.0
D-04
© Copyright 2004 Edwards
90 F ie lds tone Cour t ||||| Chesh i re , CT 06410P h : 2 0 3 . 6 9 9 . 3 3 0 0 ||||| F x : 2 0 3 . 6 9 9 . 3 1 0 8
www.edwards-s ignals.com6-22HORNS & SIRENS
The Edwards B-N-8546 AC and B-8526 DC Series are designed for
use where a loud and distinctive signal is needed. The sound
mechanism of the signal starts and stops instantly with current im-
pulse. The projector is connected to the heavy duty die cast alumi-
num housing by a cast aluminum, threaded ring.
Two mounting lugs are provided on either side of the unit for wall
mounting. The housing is tapped on one side for 1/2" (13mm) con-
duit to allow for field wiring installation.
Used where directional sound dispersion is required or specified.
Applications include timing, scheduling, paging, and general alarm
at construction sites, textile and paper mills, lumber yards, and
shipping docks.
AdaptaHorn® SingleProjector Horn
B-8526 & B-N-8546 Series
Weatherproof, NEMA Type 4X
FEATURES
> Convenient plug-in assembly
> Corrosion resistant heat flowedepoxy finish
> Completely assembled
> Gasket sealed
> External volume control screw
AGENCY APPROVALS
> UL Listed NEMA Type 4Xenclosure
SPECIFICATIONS
> Heavy duty die cast aluminum
> 7" (178mm) seamless steelprojector
> Vibrating diaphragm
> Tungsten contacts with arcsuppressor (B-8526)
D-0
4
HORNS & SIRENS
© Copyright 2004 Edwards
90 F ie lds tone Cour t ||||| Chesh i re , CT 06410P h : 2 0 3 . 6 9 9 . 3 3 0 0 ||||| F x : 2 0 3 . 6 9 9 . 3 1 0 8
www.edwards-s ignals.com
TECHNICAL INFORMATION
6-23
5 1/2"(140mm)
6 3/8"(162mm)
9 1/2"(241mm)
13/16"(21mm)
2 holes3/8" (10mm) Tap 1/2" (13mm)
5 1/8"(130mm)
DC coil dB atCat. No. Volts Amps V A Res. (Ohms) 10 Ft.
B-N-8546-E5 12V AC 1.6 19.2 3B-N-8546-G5 24V AC 1.1 26.4 5 97B-N-8546-N5 120V AC .2 24 146B-N-8546-R5 240V AC .1 24 750
B-8526-G1 24V DC 1 24 21.5 95B-8526-P1 125V DC .2 25 103B-8526-S1 250V DC .1 25 600
D-04
© Copyright 2004 Edwards
90 F ie lds tone Cour t ||||| Chesh i re , CT 06410P h : 2 0 3 . 6 9 9 . 3 3 0 0 ||||| F x : 2 0 3 . 6 9 9 . 3 1 0 8
www.edwards-s ignals.com6-26HORNS & SIRENS
The Edwards B-KM-8130 Series is a heavy-duty, high decibel, vi-
brating horn signal designed for use in hazardous locations.
Two mounting lugs are provided on either side of the unit for wall
mounting. The housing is tapped on one side for 1/2" (13mm) con-
duit to allow for field wiring installation.
Ideal for use where sound projection in a single direction is required
or specified in hazardous atmospheres where explosion proof and
dust tight features are required.
AdaptaHorn® HazardousLocation SingleProjector Horn
5 3/4"(146mm)
2 holes 3/8" (10mm) Tap 1/2" (13mm) IP
6 1/4"(159mm)
9 3/4"(248mm)7/8" (22mm)
B-KM-8130 SeriesFEATURES
> Corrosion resistant electrostaticheat flowed epoxy finish
AGENCY APPROVALS
> UL Listed for Class I, Division 1and 2, Groups C and D; Class II,Division 1 and 2, Groups E, F, andG; and Class I, Groups A and B,Division II locations
SPECIFICATIONS
> Cast aluminum housing and ring
> Seamless steel projector
> 5" (127mm) spring steeldiaphragm
> 5 1/2" (140mm) projector
coil dB atCat. No. Volts Amps V A Res. (Ohms) 10 Ft.
B-KM-8130-G5 24V AC 60 Hz 2 48 1B-KM-8130-N5 120V AC 60 Hz .45 54 24 105B-KM-8130-R5 240V AC 60 Hz .2 48 103.2
D-0
4
© Copyright 2004 Edwards
90 F ie lds tone Cour t ||||| Chesh i re , CT 06410P h : 2 0 3 . 6 9 9 . 3 3 0 0 ||||| F x : 2 0 3 . 6 9 9 . 3 1 0 8
www.edwards-s ignals.com6-24HORNS & SIRENS
The Edwards B-N-8590 AC & B-8599 DC Series vibrating horns are
designed for use where a loud and distinctive signals are needed.
The sound mechanism of the signal starts and stops instantly with
current impulse. The projector is connected to the heavy duty die
cast aluminum housing by a cast aluminum, threaded ring.
Two mounting lugs are provided on either side of the unit for wall
mounting. The housing is tapped on one side for 1/2" (13mm) con-
duit to allow for field wiring installation.
Used where sound dispersion in opposite directions is required or
specified. Applications include timing, scheduling, paging, and gen-
eral alarm at construction sites, textile and paper mills, lumber
yards, and shipping docks.
AdaptaHorn® DoubleProjector Horn
FEATURES
> Convenient plug-in assembly
> Corrosion resistant heat flowedepoxy finish
> Completely assembled
> Gasket sealed
> External volume control screw
AGENCY APPROVALS
> UL Listed 60 Hz (B-N-8590)
> UL Listed NEMA Type 4Xenclosure
SPECIFICATIONS
> Heavy duty die cast aluminum
> 7" (178mm) seamless steelprojector
> Vibrating diaphragm
> Tungsten contacts with arcsuppressor (B-8599)
B-N-8590 & B-8599 Series
Weatherproof, NEMA Type 4X
D-0
4
HORNS & SIRENS
© Copyright 2004 Edwards
90 F ie lds tone Cour t ||||| Chesh i re , CT 06410P h : 2 0 3 . 6 9 9 . 3 3 0 0 ||||| F x : 2 0 3 . 6 9 9 . 3 1 0 8
www.edwards-s ignals.com
TECHNICAL INFORMATION
6-25
5 1/8"(130mm)
2 holes 3/8" (10mm)
Tap 1/2" (13mm) IP
17 3/4"(451mm)
7 1/8"(181mm)
3/16" (21mm)
5 1/2"(140mm)
DC coil dB atCat. No. Volts Amps V A Res. (Ohms) 10 Ft.
B-N-8590-E5 12V AC 1.6 19.2 3B-N-8590-G5 24V AC 1.1 26.4 5 95B-N-8590-N5 120V AC .2 24 146
B-8599-E1 12V DC 1.5 18 3B-8599-G1 24V DC 1 24 21.5 93B-8599-P1 125V DC .2 25 103B-8599-S1 250V DC .1 25 600
D-04
© Copyright 2004 Edwards
90 F ie lds tone Cour t ||||| Chesh i re , CT 06410P h : 2 0 3 . 6 9 9 . 3 3 0 0 ||||| F x : 2 0 3 . 6 9 9 . 3 1 0 8
www.edwards-s ignals.com6-28
Motor DrivenIndustrial Siren
Heavy duty, industrial design, motor driven siren that emits a con-
tinuous loud piercing wail.
Mounts to any solid surface using two bolts. May be swiveled
through 180°, vertically or horizontally, depending on orientation of
bracket.
Used for initial installation and MRO applications in factories, lum-
ber yards, security installations, and score boards.
315A-AH
Heavy Duty, Outdoor
FEATURES
> Fully enclosed motor
> Weatherproof
> Adjustable siren direction
> AC or DC operation
AGENCY APPROVALS
> UL Listed for continuous duty
SPECIFICATIONS
> 2.5 amp motor
> Heavy gauge aluminumconstruction
> Frequency 1100 Hz
8 1/4"(210mm)
4"(102mm)
6 7/8"(175mm)
15 11/32"(390mm)
Two 9/32"(7mm)
mountingholes
7 1/2" dia.(191mm)
8 1/2" dia.(216mm)Two nuts. Loosen
to adjust siren direction
dB atCat. No. Volts Amps V A 10 Ft.
315A-AH 120V AC/DC 2.5 300 110
HORNS & SIRENSD
-04