dkny outlet packaging directive division 75 and 78 · 2018. 12. 18. · dkny/dkhk. division 75...

/40

DKNY OUTLET PACKAGING DIRECTIVE

DIVISION 75 AND 78

Created: April 20, 2016

Last Updated: Dec 18, 2018

/40

TABLE OF CONTENTS

PAGE

3 MAIN AND SIZE/COO LABEL LAYOUT

4 CARE LABEL LAYOUT

5 TRIM CHART – OUTLET

6-8 DIVISION 75 (WOMEN) - LABEL PLACEMENT

9-10 DIVISION 75 (WOMEN) - HANGTAG PLACEMENT

11-13 DIVISION 78 (MEN) – LABEL PLACEMENT

14-15 DIVISION 78 (MEN) – HANGTAG PLACEMENT

16-17 DENIM – DIVISION 75 & 78 – LABEL & HANGTAG PLACEMENT

18 CARE LABEL AND SECURITY TAB LABEL PLACEMENT

19 EXTRA ITEM ANDSPARE BUTTON PLACEMENT

20-23 OTHER TRIMS REQUIREMENT

24 CARTON AND POLYBAG REQUIREMENT

25 HALF FOLD – LONG SLEEVES: FOLDING METHOD / SIZE STICKER PLACEMENT

26 WOMEN’S SHIRT FOLD – SHORT SLEEVES: FOLDING METHOD / SIZE STICKER PLACEMENT

27 MEN’S SHIRT FOLD – SHORT SLEEVES: FOLDING METHOD / SIZE STICKER PLACEMENT

28 HALF FOLD – SHORTS: FOLDING METHOD

29 DOUBLE FOLD – PANTS: FOLDING METHOD / SIZE STICKER PLACEMENT

30 DOUBLE FOLD – WOVEN DRESSY PANTS: FOLDING METHOD / SIZE STICKER PLACEMENT

31-33 DENIM – TRI FOLD, DOUBLE FOLD, HALF FOLD

34 JUMPER – FOLDING METHOD

35 PACKAGING – HALF FOLD TOPS

36 PACKAGING – SHIRT FOLD

37 PACKAGING – ALL PANTS

38 PACKAGING – GARMENT FOLD

39 PACKAGING – LEATHER PRODUCTS

/40

MAIN AND SIZE/COO LABEL LAYOUT

Size / COO Label

MENS

Item Code: DKOMSZCOO

Supplier: Rpac

WOMENS

Item Code: DKOWSZCOO

Supplier: Rpac

End Fold Main Label

Item Code: DKOEFMAINS

Supplier: Rpac

Item Code: DKOEFMAINL

Supplier: Rpac

Supplier: Avery Dennison

Loop Main Label

Item Code: DKOLPMAINS

Supplier: Rpac

Item Code: DKOLPMAINL

Supplier: Rpac

Men’s Tailored Slim Label

Item Code: DKOTASLIM

Supplier: Rpac

Item Code: DKOSLIMFIT

Supplier: Rpac

/40

CARE LABEL LAYOUT

CARE LABEL LAYOUT

Care Label

Item Code: DKNYBKCC

Supplier: Rpac

RN# 68596 CA# 31127

/40

DIVISION 75 (WOMEN) – LABEL PLACEMENT (1)

Bottom with Printed Main Label

Printed Main Label Printed 1/2" below waistband and 3/4" away from center back seam

on wearers left back

3/4”

1/2”

Top with Printed Main Label

Printed Main Label Print centered across 1/2” below neck seam

1/2”

Main Label Insert loop label

across top edge into neck seam and centered across

Knit Top with Woven Main Label

Size/COO Label Sewn below of main label with single top

stitch

Main Label Hand tack end fold

label down to 2 upper corners. Placed at

center back top edge lined up with neck

seam

Sweater Top with Woven Main Label


stitch

/40


Woven Blouse, Top & Dress (Style without Lining)

Main Label Insert loop label across top edge into neck seam

and centered across


stitch

1/2”

Main Label Use end fold label and sew 2 end folds 1/2” below neckline

centered across

Knit/Woven Top & Dress (Style with Lining)

SIZE/COO Label Sewn below of main label with single top

stitch

Knit/Woven Top with Center Back Zip Opening


across top edge into neck seam 1” from

zipper opening

1”


stitch

Knit/Woven Lined Style with Center Back Zip

Opening

Main Label Use end fold label and sew 2 end folds 1” from zipper opening and 1/2”

below neckline

1” 1/2”

Size/COO Label Sewn below of main label with single top stitch

/40


Woven Jacket & Outerwear

Main Label Use end fold label and sew 2 end folds

1” below neckline centered across

Size/COO Label Sewn below of main label

with single top stitch

Knit/Woven Bottom & Skirt

(With Elastic at Waistband)


across top edge into waistband and

centered across



Woven Bottom & Skirt (With Curtain at

Waistband)

Main Label Use end fold label

and sew 2 end folds at center back of

waistband s

SIZE/COO Label Sewn below of main label


/40

Note: - Affix hangtag on Size/COO label when a dress or bottom style has invisible zipper installed below armhole on wearer’s left side

- If style (eg. Cowl Neck and Turtle Neck) happens to have hangtag concealed after folding, please verify hangtag placement with DKNY/DKHK.

DIVISION 75 (WOMEN) – HANGTAG PLACEMENT (1)

Hangtag Placement: To be swift tacked below wearer's left waistband side seam with a 3” color black plastic pin and with RSRP / Barcode facing up

All Bottoms and Skirts

DKNY HANGTAG

All Tops with Printed Main Label

Hangtag Placement: To be swift tacked at wearer’s left HPS inseam with a 3” color black plastic pin and with RSRP / Barcode facing up

DKNY HANGTAG

HPS Inseam

All Tops / Jacket / Outerwear styles

with Woven Size/COO Label

DKNY HANGTAG Hangtag Placement:

To be swift tacked to the back side of Size/COO label with a 3” color black plastic pin and with RSRP / Barcode facing up

/40

DIVISION 75 (WOMEN) – HANGTAG PLACEMENT (2)

Woven Bottoms / Leggings Joker Tag (if applicable)

Joker Tag Placement: Affix at wearer’s right hand side back waist 1/4” from belt loop

DKNY JOKER TAG

1/4”

/40

DIVISION 78 (MEN) – LABEL PLACEMENT (1)

Top with Printed Main Label

Printed Main Label Print centered across 1/2” below neck seam

1/2”


across top edge into neck seam and centered across


stitch

Knit Top with Woven Main Label

Main Label Hand tack end fold

label down to 2 upper corners. Placed at

center back top edge lined up with neck

seam

Sweater Top with Woven Main Label


stitch

/40


Main Label

Use end fold label and sew 4 sides at center

back 1” below neckline


stitch

Woven Sport Shirt without Streamer Label

(Regular Fit)

Main Label Use end fold label and sew 4 sides at center



stitch

Streamer Label Sewn 4 ends

1/4” below main label

Dress Shirt





Streamer Label Sewn 4 ends

1/2” below main label

Woven Sport Shirt with Streamer Label (Slim Fit)

/40


Woven Bottom (Non-Denim)


back of waistband



Woven Outerwear and Blazer


back 1.5” below neckline



Locker Loop All outerwear and

blazer require 2” wide locker

loop in self fabric

2”

1.5”

Bottom with Elastic Waistband

Main Label Use loop label insert label across top edge into neck seam and

centered across



Woven Shorts (Non-Denim)


back of waistband



/40

DIVISION 78 (MEN) – HANGTAG PLACEMENT (1)

All Tops with Printed Main Label

Hangtag Placement: To be swift tacked at wearer’s left HPS inseam with a 3” color black plastic pin and with RSRP / Barcode facing up

DKNY HANGTAG

HPS Inseam

All Knit / Sweater / Woven Tops styles

with Woven Size/COO Label

DKNY HANGTAG

Hangtag Placement: To be swift tacked to the back side of Size/COO label with a 3” color black plastic pin and with RSRP / Barcode facing up

Hangtag Placement: To be swift tacked to the back side of Size/COO label with a 3” color black plastic pin and hidden inside the garment

Tops in Turtle Neck or Mock Neck Style

DKNY HANGTAG (hidden inside the garment)

Hangtag Placement: To be swift tacked to the back side of Size/COO label with a 3” color black plastic pin and with RSRP / Barcode facing up

Woven Jacket and Outerwear

DKNY HANGTAG

/40

DIVISION 78 (MEN) – HANGTAG PLACEMENT (2)

Hangtag Placement: To be swift tacked to 2nd buttonhole with color black plastic loop and with RSRP / Barcode facing up

Woven Shirt

DKNY HANGTAG

Hangtag Placement: To be swift tacked below wearer's left waistband side seam with a 3” color black plastic pin and with RSRP / Barcode facing up - Classic Fit / Slim Fit Tag on top (for Pants only) - DKNY hangtag in the middle - Spare button w/ polybag at the bottom

Joker Tag Placement: Affix at wearer’s right hand side back waist 2” from side seam

DKNY JOKER TAG

2”

Woven Bottoms

Pirce Hangtag

/40

DENIM – DIVISION 75 & 78 – LABEL & HANGTAG PLACEMENT

Men’s – Printed Main/Size/COO Label Placement

Size/COO Label

Place in center back, inside of waistband

Printed Main Label Printed center back on

waistband

Women’s – Printed Main/Size/COO Label Placement

Size Label Place in center back on top of COO label

Printed Main Label Printed center back on

waistband

COO Label Place in

center back, inside of

waistband

Joker / Price Hangtag / Disclaimer Hangtag

Placement

Joker Tag Placement (For both Men’s and Women’s): -Affix at wearer’s right hand side back waist 2” from side seam -Affix at wearer’s right hand side “BACK” waist 3/8” from Logo leather patch

Disclaimer Hangtag

Price Hangtag

Hangtag Placement: - Price Hangtag to be swift tacked below wearer's left waistband side seam with a 3” color black plastic pin and with RSRP / Barcode facing up - Price Hangtag to be placed on top of Disclaimer hangtag

DKNY JOKER

TAG

LEATHER

PATCH

3/8”

/40

DENIM – DIVISION 75 & 78 – LABEL & HANGTAG PLACEMENT

Women’s – Denim Shirt



Main Label Use loop label insert label across top edge into neck seam and

centered across




stitch

Men and Women – Denim Shirt

/40

CARE LABEL AND SECURITY TAB LABEL PLACEMENT

Care Label Placement: Insert care label to

wearers left back side seam 4” up from bottom

edge a with single needle lockstitch

Security Tab Label

Placement: Sewn on top of care label

with a single needle lockstitch

Knit/Sweater/Woven Top, Dress and Blazer:

For style without side vent

4” Care Label

Security Tab Label

Knit/Sweater/Woven Bottom & Jumpsuit

4”

Care Label

Security Tab Label

Care Label Placement: Insert care label to wearers left back side seam 4” below

waistband a with single needle lockstitch

Security Tab Label



Knit/Sweater/Woven Top and Dress:

For style with side vent

Care Label Placement: Insert care label to

wearers left back side seam 2” up from bottom

edge a with single needle lockstitch

Security Tab Label



2”

Care Label

2”

Security Tab Label

Denim Bottom

Care Label Placement: Insert 1.5” above bottom

edge of pocketing at wearer’s left side seam

Security Tab Label



1.5” Security Tab Label

Care Label

Left Side

Seam

/40

EXTRA ITEM AND SPARE BUTTON PLACEMENT

Spare Button / Hook & Eye / Beads / Sequins

Placement

1) For below knit styles, sew spare button on empty area on care label, do not overlap care instruction!

- Knit – Casual Top - Knit – Tee - Knit – Active Wear - Woven – Men’s Dress Shirt

2) For below garment styles, use clear plastic polybag to insert spare button or trim. Swift tack clear polybag behind hangtag.

- All sweater items - All bottom styles - Knit – Dressy/ Novelty style - Woven – Dress / Skirt / Blouse / Top - Woven Jacket and Outerwear - Women’s Denim Shirt - All knit styles if required more than 2 spare buttons

3) For below garment styles, sew button at bottom of inner placket.

- Men’s Denim Shirt - Woven – Men’s Sport Shirt

1-3/4”

1/4”

On Placket:

Sew buttons at bottom of inner placket with larger line button 1.75” from the bottom, and smaller line button 0.25” from the larger line button.

Spare Button/Item Placement

On Care Label:

Sew button(s) on empty area of care label, do not overlap care instruction!

Care Label

Spare Button

In Polybag:

Insert spare button (or spare item) in clear plastic polybag. Swift tack polybag behind hangtag Polybag size should be around 6cm (L) x 4cm (W) in size

/40

OTHER TRIMS REQUIREMENT (1)

Required on men’s dress shirt only Supplier: Yvonne Item Code: DK-OL-SK-003 Size: 100 x 10mm

Polybag Sticker

Required on each individual polybag. Refer sticker placement on packaging section.

To be ordered with R-Pac

Wearer’s

Left Side

Wearer’s

Right Side

Both mens and womens should always have wearer’s left insert zipper for open end style. Zipper

puller should be installed on wearer’s right side

Zipper Insert Direction Hanger Loop

DTM ¼” Satin hanger loops may be applied on women styles; reconfirm with DKHK for applicability per style,

placement and length.

All woven jacket and outerwear double breasted style with

functional buttons require of adding 14L 4 holes of reinforce button

underneath

Reinforce Button

Button should be cross stitched and button thread color should be matching button color unless specified otherwise.

Button Stitching and

Thread Color

Joker Tag

All men’s woven pants require joker tag at wearer’s right hand side back waist 2.5” from side seam. Women joker tag is placed on wearer’s right hand side back waist 1/4” from belt loop Joker tags are to be ordered with R-Pac

Size Sticker Strip

(For Men’s Dress Shirt Only)

/40


Silica Gel

Factory may use its own source of silica gel but it must be RoHS and REACH compliant. Certification from a DKNY third party lab must be submitted as part of test requirements. For all flat packed garments require 20 packets distributed around edges of box after packing the garments and before closing the box. Each silica gel should weigh 2 grams. **DO NOT PUT silica gel for European orders.**

Mould/mildew/odor could form during warehousing and transportation. The best way to prevent any issues with mold and mildew are the precautions the factory takes before the garments are packed.

1. Factory should be clean 2. Pallets/packers should be a min of 80 cm from the wall 3. Inspectors/packing personnel should wear gloves 4. Most importantly, a dry steam setting is used

Provincial (TSSA) Label

Provincial (TSSA) Label is required to be added on filled garment for Canada orders. TSSA label should be printed with English and French and it should be placed below care label.

TSSA label Placement: - Insert at side seam underneath care label

/40


Disclaimer Hangtag Placement:

Place disclaimer hangtag on top of price hangtag with wordings facing up.

DKNY Price Hangtag

Disclaimer Hangtag

Disclaimer Hangtag

Disclaimer hangtag should be applied to styles with potential issues such as snagging, garment dyed, and sprayed dyed, etc. Disclaimer hangtags are to be ordered with R-Pac and must be confirmed with DKNY before applying.

Disclaimer Hangtag Layout:

/40

SECURE TAPE SUPPLIER :

Hao Hao is RMB7.7/90 meters/roll(excluding fax & freight)

Mr Chen, Tel 573-87492878 OR Mr. Shen 13567364567 ,Fax,0573-87419878, Email address: [email protected]

/40


Faux Fur Label

All FAUX FUR styles should include a Faux Fur Label Item# DK-SATIN-B0917SSL-FAUX Supplier: Avery Dennison

Faux Fur Label Placement: - Insert at side seam below care label

/40

247 mm

CARTON AND POLYBAG REQUIREMENT

Polybag Requirement: - Polybag Quality / Thickness: PE03 (1.25 mil) - Polybag Size: Should be adjusted per fold size to fit each style - Use envelop polybag for shirt fold and half fold (refer polybag styling on packaging section) - Use regular polybag opening for garment fold (refer polybag styling on packaging section) - Requires perforated line Polybag Warning: - Must be trilingual – English, French and Spanish - Printed on the center of the back side of the polybag - Print below text EXACTLY as worded and type correctly using:

Black Ink, Capital Letters, Lower Cases, Accent Marks, and Punctuations - The same font size must be used for all 3 languages

Warning Layout:

58 m

m

- Maximum carton dimension:

Length 30cm (12”) x Width 23cm (9”) x Height 13cm (5”) OR

Length 102cm (40’) x Width 76cm (30”) x Height 51cm (20”)

- Carton weight: 23kgs/ 50lbs maximum

- Cartons must have Edge Crush Weight = 200 pounds/inch

- Check with GIII logistics if size beyond requirement

- Double corrugated cartons must be used (as diagram)

Carton Requirement:

/40

HALF FOLD – FOLDING METHOD / SIZE STICKER PLACEMENT

Fold line

Step 2 (Back View)

Half Fold - For all long and short sleeves Sweaters - For all heavy weight long sleeves knit and woven tops Folding Size: - Folding size is subjected to garment size after folding 1/2” Round Size Sticker Placement: - Place size sticker 2” from wearer’s left side seam and 2” above fold line - Size sticker is required per style and division (refer to outlet trim chart) Remarks: - No tissue paper unless specified otherwise - No pins, no clips - No hanger - If there are sleeve tabs, garment need to be shipped with roll sleeves

Step 3

(Back View) (Front View)

Fold line Fold line

Step 1 (Front View)

/40

WOMEN’S SHIRT FOLD – FOLDING METHOD / SIZE STICKER PLACEMENT

Women Shirt Fold - For all short sleeves and light weight long sleeves knit and woven tops Folding Size: - Standard folding size is 14” (L) x 11.5” (W) but folding size may vary per women style 1/2” Round Size Sticker Placement: - Place size sticker 1” from wearer’s left side seam and 1” above fold line - Size sticker is required per style and division (refer to outlet trim chart) Remarks: - No tissue paper unless specified otherwise - No pins, no clips - No hanger

Step 2 (Back View)

Fold line Fold line

Step 1 (Front View) Fold line Fold line

Step 3

Fold line

Fold line (If applicable - per body length)

(Back View) Step 4 (Front View)

(L)

(W)

(Back View)

/40

MEN’S SHIRT FOLD – FOLDING METHOD / SIZE STICKER PLACEMENT

Fold line Fold line

Step 2 (Back View)

Men’s Shirt Fold - For all short sleeves and light weight long sleeves knit and woven tops Folding Size: - 12” (L) x 9-3/8” (W) 1/2” Round Size Sticker Placement: - Place size sticker 1” from wearer’s left side seam and 1” above fold line - Size sticker is required per style and division (refer to outlet trim chart) Remarks: - No tissue paper unless specified otherwise - No pins, no clips - No hanger

Step 1 (Front View) Fold line Fold line

Step 3

(Back View)

Fold line

Fold line (If applicable - per body length)

Step 4 (Front View)

(L)

(W)

(Back View)

/40

HALF FOLD – SHORTS: FOLDING METHOD

Half Fold – Shorts Remarks: - No tissue paper unless specified otherwise - No pins, no clips - No hanger - No size sticker

Step 2 (Left Side View) Step 1 (Front View)

Fold line

** No size sticker for shorts **

(Right Side View)

Joker Tag

/40

DOULBLE FOLD – PANTS:

FOLDING METHOD / SIZE STICKER PLACEMENT

(Right Side Back View After Folded)

Double Fold – Pants - No tissue paper unless specified otherwise - No pins, no clips - No hanger

Step 1 (Front View)

Fold line

Step 2 (Wearer’s Back

Right Side View) Step 3

Joker Tag

(Left Side Back View After Folded)

Joker Tag

/40

DOULBLE FOLD – WOVEN DRESSY PANTS:

FOLDING METHOD / SIZE STICKER PLACEMENT

Double Fold – Woven

Dressy Pants - No tissue paper unless specified otherwise - No pins, no clips - No hanger

(Wearer’s Left Side View After Folded)

Step 2

(Wearer’s Right Side View After Folded)

Joker Tag

Step 1

(Wearer’s Right Side View)

Joker Tag

/40

DENIM TRI FOLD – FULL LENGTH JEANS / CROP JEANS

FOLDING METHOD

Tri Fold – Denim

For Full Length Jeans and Crop Jeans Remarks: - No tissue paper unless specified otherwise - No pins, no clips - No hanger

Step 2



(Wearer’s Right Side View)

Step 3 Step 1

(Wearer’s Left Side View)

/40

DENIM DOUBLE FOLD – LUDLOW SHORTS

FOLDING METHOD

Double Fold – Denim

For Ludlow Shorts Remarks: - No tissue paper unless specified otherwise - No pins, no clips - No hanger

Step 1

(Wearer’s Left Side View)

Step 2



/40

DENIM HALF FOLD – SHORTS

FOLDING METHOD

Half Fold – Denim

For Shorts Remarks: - No tissue paper unless specified otherwise - No pins, no clips - No hanger

Step 2


Step 1

/40

JUMPER - FOLDING METHOD

(Front View After Folded)

Jumper - No tissue paper unless specified otherwise - No pins, no clips - No hanger

Step 1 (Front View) Step 2 (Back View)

Step 4

(Back View After Folded)

Step 3 (Back View)

Fold line

Fold line Fold line

Fold line

/40

PACKAGING – HALF FOLD

Half Fold 1) Use envelop polybag 2) Polybag opening should be at top of polybag’s back side with a 3” flap/envelop opening 3) Place polybag sticker at top left corner 2” from top and left side of the polybag 4) No adhesive tape required at polybag opening

(Front View)

Perforated Line

Polybag Sticker

2”

2”

Seal polybag opening with 1 adhesive tape

(Back View)

Perforated Line

3” Flap

/40

PACKAGING – SHIRT FOLD

Shirt Fold 1) Use envelop polybag 2) Polybag opening should be at top of polybag’s back side with a 3” flap/envelop opening 3) Place polybag sticker at top left corner 1” from top and left side of the polybag 4) No adhesive tape required at polybag opening

Polybag Sticker

1”

1”

(Front View)

Perforated Line

Seal polybag opening with 1 adhesive tape

(Back View)

Perforated Line

3” Flap

/40

PACKAGING – ALL PANTS

All Pants 1) Use envelop polybag 2) Polybag opening should be at warning’s right side on polybag’s back side with a 3” flap/envelop opening 3) Place polybag sticker at top left corner 2” from top and left side of the polybag 4) No adhesive tape required at polybag opening

Polybag Sticker

2”

2”

(Front View)

Perforated

Line

(Back View)

Perforated Line

3”Flap Seal polybag

opening with 1 adhesive

/40

PACKAGING – GARMENT FOLD

Garment Fold - For Leather and Outerwear 1) Use regular opening polybag 2) Insert garment in polybag unfold. 2) Place polybag sticker at top left corner 2” from top and left side of the polybag 3) Make 1 fold at polybag opening and seal with 2 adhesive tapes 4) Perforated line can be either vertical or horizontal across polybag

Fold line

(Front View)

Perforated

Line

Polybag Sticker

2”

2”

(Back View)

Perforated Line

Seal polybag opening with 2 adhesive tapes

/40

PACKAGING – LEATHER PRODUCTS

Leather Goods 1) All metal components/ buttons etc (anything that would leave an impression on leather skin) should be tissue wrapped 2) If style is to be garment washed, extra precaution must be taken to protect components in the drum. Tabs can be attached after washing 3) As garments are being flat packed, operators need to avoid folding sleeves so that sleeve zippers/buttons are not in direct contact with body 4) Insert cardboard inside garment 5) Place tissue paper on front and back of garment before inserting into polybag (see picture) 6) Ventilation holes or flutter vents must be present in polybag - not enough to fold up bottom and tape closed 7) Silica gel should be placed in the pockets of garments as well as packer. If there are no pockets - place in folded package 8) Garments must be thoroughly dry before packing 9) Do no hide hangtag; always keep hangtag visible outside of garment

Tissue paper covered zipper pulls

Packing with cardboard inside garment

Place tissue paper on top and back of garment before

inserting into polybag

dkny outlet packaging directive division 75 and 78 · 2018. 12. 18. · dkny/dkhk. division 75...

Documents