dosis 3.1 1218 mhz atv amplifiers...re efficient spectrum and reduces network delay. frequency split...
TRANSCRIPT
DOCSIS 3.1 - 1218 MHz
CATV Amplifiers
Features
For CATV Upgrades to DOCSIS 3.1
1218 MHz Forward Bandwidth
Reverse Bandwidth Options
For Various Scale Networks
Cost Efficent
Open for Custom Requirements
For our broadband product range and more, please visit www.tron.com.tr
FX3.1 two way apartment house type amplifiers with active return are broadband indoor GaAs E-pHEMT Push Pull distribution amplifi-ers designed for 1.2 GHz DOCSIS 3.1 supported RF distribution sys-tems such as those in Cable Television Apartments, Hotels, Hospitals and other applications where a high quality low noise figure amplifi-er is necessary to amplify the signals in both the forward and return paths. Designed for flat operational gain of 35 dB in the forward path and 18 dB in the reverse path. They have an input equalizer and inter-stage equalization feature in the forward bandwidth for balancing, a forward input gain control, input and output reverse gain controls.
www.tron.com.tr
FX 3.1 Series CATV Distribution Amplifier
1.2 GHz - DOCSIS 3.1
RF Parameters
Forward (Down-Stream)
Technology GaAs E-pHEMT
Forward Bandwidth 105-1200 MHz
Gain 35 dB
Gain Response Flatness +/-1 dB
Gain Control (Input) 0…20 dB (via JXP plug in)
Cable Slope Control (Input & Mid-Stage) 0…20 dB (via JXP plug in)
RF Test Points In/Out -20 dB (bi-directional)
Forward Distortions (42dBmV (105-1000 MHz) flat output level, 79 NTSC channels, digital at -6dB after 600MHz)
CTB -59 dBc
CSO -64 dBc
XMOD -60 dBc
Forward Distortions (34/36 dBmV (105-1000 MHz) output level, 79 NTSC channels, digital at -6dB after 600MHz)
CTB -63 dBc
CSO -66 dBc
XMOD -60 dBc
Noise Figure < 6 dB
Return Loss (Input & Output) -14 dB
Reverse (Up-Stream)
Reverse Bandwidth 5-85 MHz
Gain 18 dB
Gain Response Flatness +/-1 dB
Gain Control (Input & Output) 0…20 dB (via JXP plug in)
RF Test Points In/Out -30 dB (bi-directional)
Reverse Distortions (48dBmV flat output on each of CH T8 and T9 according to ANSI/SCTE115 2011)
DTO (on 7 & 25MHz) -75 dBc
DSO (on 6 & 32MHz) -60 dBc
XMOD (on T8,9) -75 dBc
Noise Power Ratio (NPR or CINR) 64 @ 24dBmV input power
Input Dynamic Range @ NPR=41dB 46dB (-3...43dBmV)
Return Loss (Input & Output) -16 dB
Noise Figure < 6 dB
General Features
Number of Outputs 1 bidirectional output 5-1200MHz and 1 test output
RFI Isolation -90 dB
Surge Protection IEEEC62.41 Cat.A3(6kV,200A)
Powering 90-240 universal or 24-65 VAC line powering
Power Consumption 4 Watt
Operation Temperature -30…+50 degC
Mechanical Enclose IP54 class protection, diecast housing
Dimension and Weight 105x125x50 mm and 0,70 kgs
DOCSIS 3.1 Supported
DOCSIS 3.1 enables higher data speeds with a more efficient spectrum and reduces network delay.
1.2 GHz GaAs E-pHEMT Push Pull Technology
GaAs E-pHEMT Push-Pull design for high output levels with low distortions and very high effici-ency.
Gain and Equalization Controls
All gain and equalizer controls by plug-in JXP style components.
Powering Options
90-240 universal or 24-65 VAC in line powering(external powering adaptor is also applicable).
IP54 Ultra Compact Housing
Diecast aluminum housing with advanced heat dissipation and screening provides high durabi-lity against dust and water.
Bi-Directional Test Points
-20dB input and output test points enable easy setup and performance monitoring without ser-vice interruption.
TS_FX3.1_V1_Feb15
RF Specs
Forward Path (Down-Stream)
Technology GaAs - RFIC Push Pull
Forward Bandwidth Options 54-1008 MHz / 108-1218 MHz / 258-1218 MHz
Gain 38 dB
Gain Response Flatness +/-1 dB
Gain Control (Input & Mid-Stage) 20..0 dB (by plug in JXP style or step attenuator)
Slope Control (Input & Mid-Stage) 20..0 dB (by plug in JXP style or step attenuator)
Forward Distortions (40/50 dBmV, 54-1000 MHz output level, 79 NSTC channels, digital at -6dB af ter 550MHz )
CTB (on ch78) -70 dBc
CSO (on ch78) -72 dBc
XMOD (on ch2) -73 dBc
Forward Distortions (36/46 dBmV, 54-1000 MHz output level, 79 NSTC channels, digital at -6dB af ter 550MHz )
CTB (on ch78) -83 dBc
CSO (on ch78) -74 dBc
XMOD (on ch2) -80 dBc
Noise Figure < 6 dB
Reverse Path (Up-Stream)
Reverse Bandwidth Options 5-42 MHz / 5-85 MHz / 5-204 MHz
Gain Min. 22 dB
Gain Response Flatness +/-1 dB
Gain Control (Input & Output) 20..0 dB (by plug in JXP style or step attenuator)
Slope Control (Output) 20..0 dB (by plug in JXP style or step attenuator)
Reverse Distortions (52dBmV flat output, 2 ch. according to ANSISCTE 1152006)
DTO on 7MHz 708 dBc
DSO on 6MHz -75 dBc
Xmod on T10 -66 dBc
Noise Figure < 6 dB
General Specs
RF Isolation (Screening) ≥ 100 dB
Powering Options 90-240 universal or 24-65 VAC in line powering
Enclosure IP54 Category, Diecast Aluminium
Dimensions and Weight 210 x 170 x 90 mm ve 2,80 kg
PA-X 3.1 CATV Distribution Amplifiers with active return are broad-
band indoor GaAs-FET Push Pull, high output level distribution ampli-
fiers designed for 1.2 GHz DOCSIS 3.1 RF distribution systems such
as those in Cable Television Apartments, Hotels, Hospitals and other
applications where a high quality low noise figure amplifier is neces-
sary to amplifythe signals in both the forward and return paths.
҉ Fully meets the requirements of DOCSIS 3.1 and DVB-C2.
҉ Downstream frequency bandwidth can reach up to 1.2 GHz.
҉ Upstream frequency is flexible and can be updated to 204
MHz.
PA-X 3.1 Series
CATV Distribution Amplifier
1.2 GHz - DOCSIS 3.1
www.tron.com.tr
DOCSIS 3.1 Supported
DOCSIS 3.1 enables higher data speeds with a mo-re efficient spectrum and reduces network delay.
Frequency Split Options
Downstream: 54-1008 / 108-1218 /258-1218 MHz Upstream : 5-42 / 5-85 / 5-204 MHz
1.2 GHz GaAs RFIC Push Pull Technology
GaAs RFIC Push Pull design for high output levels with low distortions and very high efficiency.
Gain and Equalization Control Options
All gain and equalizer controls by plug-in JXP style components or step attenuators.
Powering Options
90-240 universal or 24-65 VAC in line powering(external powering adaptor is also applicable).
IP54 Class of Enclosure
Diecast aluminum housing with advanced heat dissipation and screening provides high durability against dust and water.
Reverse Path
Fwd OutFwd In
Bi-directionalFwd Out/ Rev In
TP -20dB
12V DC
90 – 240 VAC6V DC
Forward Path
Bi-directionalFwd Out/ Rev In
TP -20dB
RF Specs
Forward Path (Down-Stream)
Technology GaAsFetPush Pull
Forward Bandwidth Options 54-1008 MHz / 108-1218 MHz / 258-1218 MHz
Gain 35 dB
Gain Response Flatness +/-1 dB
Gain Control (Input) 20..0 dB (by plug in JXP style or step attenuator)
Slope Control (Input) 20..0 dB (by plug in JXP style or step attenuator)
Forward Distortions (34/46 dBmV, 54-1000 MHz output level, 79 NSTC channels, digital at -6dB af ter 550MHz )
CTB (on ch78) -63 dBc
CSO (on ch78) -70 dBc
XMOD (on ch2) -62 dBc
Noise Figure < 7 dB
Reverse Path (Up-Stream)
Reverse Bandwidth Options 5-42 MHz / 5-85 MHz / 5-204 MHz
Gain Min. 18 dB
Gain Response Flatness +/-1 dB
Gain Control (Input) 20..0 dB (by plug in JXP style or step attenuator)
Output Level (-60dB IMD3) 118 dBuV
Noise Figure < 7 dB
General Specs
RF Isolation (Screening) ≥ 85 dB
Powering Options 90-240 universal or 24-65 VAC in line powering
Enclosure IP54 Category, Diecast Aluminium
Dimensions and Weight 195 x 136 x 75 mm and 1,40 kg
PA 3.1 CATV Distribution Amplifiers with active return are broadband
indoor GaAs-FET Push Pull, high output level distribution amplifiers
designed for 1.2 GHz DOCSIS 3.1 RF distribution systems such as
those in Cable Television Apartments, Hotels, Hospitals and other
applications where a high quality low noise figure amplifier is neces-
sary to amplifythe signals in both the forward and return paths.
҉ Fully meets the requirements of DOCSIS 3.1 and DVB-C2.
҉ Downstream frequency bandwidth can reach up to 1.2 GHz.
҉ Upstream frequency is flexible and can be updated to 204
MHz.
PA 3.1 Series CATV Distribution Amplifier
1.2 GHz - DOCSIS 3.1
www.tron.com.tr
DOCSIS 3.1 Supported
DOCSIS 3.1 enables higher data speeds with a mo-re efficient spectrum and reduces network delay.
Frequency Split Options
Downstream: 54-1008 / 108-1218 /258-1218 MHz Upstream : 5-42 / 5-85 / 5-204 MHz
1.2 GHz GaAs - FET Push Pull Technology
GaAs - FET Push Pull design for high output levels with low distortions and very high efficiency.
Gain and Equalization Control Options
All gain and equalizer controls by plug-in JXP style components or step attenuators.
Powering Options
90-240 universal or 24-65 VAC in line powering(external powering adaptor is also applicable).
IP54 Class of Enclosure
Diecast aluminum housing with advanced heat dissipation and screening provides high durability against dust and water.