1869 18691" HEAVY DUTY AIR IMPACT WRENCHwith 6" Anvil
1" HEAVY DUTY AIR IMPACT WRENCHwith 6" Anvil
2
Important
1868-11868-21868-31868-41868-51868-61868-71868-81868-91868-101868-111868-121868-131868-141868-151868-181868-191868-201868-211868-221868-231868-241868-25
Product Information:
When unpacking, check the parts diagram and part number listing on page 2 to make sure all parts are included. If any parts are missing or damaged, please call your distributor.
Unpacking
www.astrotools.com
Always wear ANSI approved safety goggles when using this product. Normal use of this product is likely to expose the user to dust and/or microscopic particles containing chemicals known to the Sate of California to cause caner, birth defects or other reproductive harm. Always wear appropriate safety equipment and clothing when using this product. Study, understand, and follow all instructions provided with this product.
111111111111113111118811
Trigger Handle AssemblyPlunger BushingReverse Valve BushingInside TriggerPinSpring PinSlot CoverThrottle ValveThrottle Valve PlungerThrottle Valve SpringAngle Inlet BushingReverse Valve KnobBallProtective Rubber BootO-RingSpring PinSpring PinSpringSpring PinHandle GasketHandle Cap ScrewLock WasherMotor HousingBearing1868-26
1868-271868-281868-291868-301868-311868-321868-331868-341868-351868-361868-371868-381869-391868-401868-411868-431868-441868-451868-461868-471868-481868-491868-501868-51
111611111111121111114111
Rear End Plate AssemblySpring PinRotorVaneCylinder AssemblySpring PinFront End PlateBearingHammer FrameHammer CamHammerSide Plate6” AnvilScrewRetainer RingHammer Case AssemblyHammer Case BushingOil SealProtective Rubber BootHammer Case GasketDead Handle Cap ScrewHandle GripSwept Back HandleScrew Lock Washer
•
•
•
•
•
Normal use of this product is likely to expose the user to dust and/or microscopic particles containing chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. Always wear appropriate safety equipment and clothing when using this product. Study, understand and follow all instructions provided with this product.
Always wear ANSI approved goggles when using this product.
Always select the correct accessories of the correct size and design for the job that you are attempting to perform.
Always work in a clean, safe, well-lit, organized and adequately equipped area.
Do not begin repairs without assurance that vehicle is in secure position, and will not move during repair.
• Ideal for tire work on trucks, buses and off-road, farm equipment
• "Pin-less" impact mechanism submits brute force strike
with low vibration
• 6" anvil makes tool perfect for the demanding world
of truck tire service
• Six-position power management/regulator
(3 forward & 3 reverse)
• Air Inlet with 45 degree angle
• Air Exhaust - Upward (away from work piece)
• Swept-back side handle & protective rubber boot
SPECIFICATIONSWorking Torque Range: 300-1400 ft/lbs (408-1904 NM)Max. Torque: 1800ft/lbs (2448NM)Blow per minute: 750Free Speed: 5000rpmRecommended Air Pressure: 90psi (6.35kgs)Air Inlet: 1/2" NPTMinimum Hose Size: 1/2" I.D.Overall Length: 20.1" (510mm)Weight: 27lbs (12.3kgs)
(B)
01/9/2006
1869 18691" HEAVY DUTY AIR IMPACT WRENCHwith 6" Anvil
1" HEAVY DUTY AIR IMPACT WRENCHwith 6" Anvil
2
Important
1868-11868-21868-31868-41868-51868-61868-71868-81868-91868-101868-111868-121868-131868-141868-151868-181868-191868-201868-211868-221868-231868-241868-25
Product Information:
When unpacking, check the parts diagram and part number listing on page 2 to make sure all parts are included. If any parts are missing or damaged, please call your distributor.
Unpacking
www.astrotools.com
Always wear ANSI approved safety goggles when using this product. Normal use of this product is likely to expose the user to dust and/or microscopic particles containing chemicals known to the Sate of California to cause caner, birth defects or other reproductive harm. Always wear appropriate safety equipment and clothing when using this product. Study, understand, and follow all instructions provided with this product.
111111111111113111118811
Trigger Handle AssemblyPlunger BushingReverse Valve BushingInside TriggerPinSpring PinSlot CoverThrottle ValveThrottle Valve PlungerThrottle Valve SpringAngle Inlet BushingReverse Valve KnobBallProtective Rubber BootO-RingSpring PinSpring PinSpringSpring PinHandle GasketHandle Cap ScrewLock WasherMotor HousingBearing1868-26
1868-271868-281868-291868-301868-311868-321868-331868-341868-351868-361868-371868-381869-391868-401868-411868-431868-441868-451868-461868-471868-481868-491868-501868-51
111611111111121111114111
Rear End Plate AssemblySpring PinRotorVaneCylinder AssemblySpring PinFront End PlateBearingHammer FrameHammer CamHammerSide Plate6” AnvilScrewRetainer RingHammer Case AssemblyHammer Case BushingOil SealProtective Rubber BootHammer Case GasketDead Handle Cap ScrewHandle GripSwept Back HandleScrew Lock Washer
•
•
•
•
•
Normal use of this product is likely to expose the user to dust and/or microscopic particles containing chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. Always wear appropriate safety equipment and clothing when using this product. Study, understand and follow all instructions provided with this product.
Always wear ANSI approved goggles when using this product.
Always select the correct accessories of the correct size and design for the job that you are attempting to perform.
Always work in a clean, safe, well-lit, organized and adequately equipped area.
Do not begin repairs without assurance that vehicle is in secure position, and will not move during repair.
• Ideal for tire work on trucks, buses and off-road, farm equipment
• "Pin-less" impact mechanism submits brute force strike
with low vibration
• 6" anvil makes tool perfect for the demanding world
of truck tire service
• Six-position power management/regulator
(3 forward & 3 reverse)
• Air Inlet with 45 degree angle
• Air Exhaust - Upward (away from work piece)
• Swept-back side handle & protective rubber boot
SPECIFICATIONSWorking Torque Range: 300-1400 ft/lbs (408-1904 NM)Max. Torque: 1800ft/lbs (2448NM)Blow per minute: 750Free Speed: 5000rpmRecommended Air Pressure: 90psi (6.35kgs)Air Inlet: 1/2" NPTMinimum Hose Size: 1/2" I.D.Overall Length: 20.1" (510mm)Weight: 27lbs (12.3kgs)
(B)
01/9/2006