7
Cat No Range Graduation Item No
1251MEA-12/300 300mm / 12”
0.02mm / 0.001”
BR5860
1251MEA-20/500 500mm / 20” BR587
1251MEA-24/600 600mm / 24” BR588
1251MEA-40/1000 1000mm / 40” BR5890
1251MEA-20/500
3753 series - elecTroNic DiGiTAl DePTh GAuGes & Accessories
Cat No Range Graduation / Description Item No
3753AZ-6/150 150mm / 6”
0.01mm / 0.0005”
DR9450
3753AZ-8/200 200mm / 8” DR9453
3753AZ-12/300 300mm / 12” DR9456
3648-180 180mm Base Extension With Screws DR94250
3648-260 260mm Base Extension With Screws DR94251
3648-320 320mm Base Extension With Screws DR94252
3753A-6/150
Long range vernier caliper complete with fineadjustment thumb wheel.
• Sharp, black graduations on the satin finished bar.
• Fine adjustment thumb wheel.
This light, portable and easy to use depth gauge is reliable and accurate for measurements to 0.01mm (0.0005”).
• Hardened stainless steel body and slide for long life.
• Fine adjustment thumb wheel.• Sharp, easy to read LCD display.• Hook attachment is furnished with the
gauge, making it possible to take readings from the edge of the workpiece to edges of slots, grooves, shoulders and other ID length dimensioning.
• Lock to hold the slide in position.• Instant inch/mm conversion.
1251 series - loNG rANGe verNier cAliPers
CalipErS & DEpTH GauGES
Cat No SizeRange Depth Of
JawsWidth Of
Nibs ClosedGraduation
Item NoOutside Inside Slide Stock
1025ME-130 130mm / 5” 0-96mm/0-3.3/4”
6-100mm/1/4-4”
36mm/1.3/8”
6mm/0.236”
1/2mm64ths mm DP767
1025 series - PocKeT sliDe cAliPer
448 series - verNier DePTh GAuGes
These are easy to use, very accurate depth gauges. They are designed for measuring the depths of holes, slots and recesses and for inspecting jig, fixtures and die work. They are also ideal for measuring from a plane surface to toolmakers’ buttons for locating centre distances.
• Heads are hardened, ground and lapped.• Measuring blades are hardened and
ground and have accurate and sharp machine divided graduations.
• Slide lock nut to hold measurement.• Screw type adjusting nut allows for fine
measuring adjustment.• All metric graduations read to 0.02mm with
the bar graduated in 0.5mm increments.
Cat No Range Blades Furnished Base Length x Width Item No
448MEZ-6 0 - 150mm / 0 - 6” One (150mm / 6”)
70 x 6.35mm /
2.3/4” x 1/4”
CV732
448MEZ-12 0 - 300mm / 0 - 12” One (300mm / 12”) CV734
448MEZ-612 0 - 300mm / 0 - 12” Two (150mm / 6” & 300mm / 12”) CV752
Cat No Range Graduation Item No
B5000BZ-20/500 500mm / 20”
0.01mm / 0.0005”
DR9600
B5000BZ-24/600 600mm / 24” DR9603
B5000BZ-40/1000 1000mm / 40” DR9606
• Strong, lightweight and stable carbon fibre bar.
• Ti N coated stainless steel jaws.• Tight, smoothly fitted slides for maximum
accuracy and easy adjustment.• Locknut to hold measurement.• Screw-type adjusting nut allows for fine
measuring adjustment.
• Large easy to read display with resolution 0.01mm/0.0005”.• MM/Inch conversion.• Output port.• Two preset modes to install any reading at
any point.• Ability to zero the reading at any position.• Packed in a wooden case.
5000 series - cArboN fibre cAliPers
Cat No Range Graduation Item No
5006BZ-14/350Internal: 42-350mm / 1.654”-13.780”
External: 0-270mm / 0”-10.630”0.01mm / 0.0005” DR9620
• Stainless steel construction.• Interchangeable ball contact standard.• Other contacts available on special
request.• Tight, smoothly fitted slides for maximum
accuracy and easy adjustment.• Lock nut to hold measurements.• Large easy to read display with resolution
0.01mm/0.0005”.
• MM/Inch conversion.• Output port.•Two preset modes to install any reading at
any point.• Ability to zero the reading at any position.• Packed in a wooden case.
5006 series - iNTerNAl / exTerNAl cAliPer