SAP Note
Header Data
Symptom
When you implement or update a scenario, you must update the SAP Component Repository Content (SAP CR Content) in the System Landscape Directory (SLD) or the landscape management database (LMDB).
Other Terms
System Landscape Directory (SLD) Software Lifecycle Management Software Catalog CIM Model CR Content Exchange Infrastructure (PI) NetWeaver Development Infrastructure (NWDI) Landscape management database (LMDB)
Reason and Prerequisites
The SAP Component Repository (SAP CR Content) is an integral part of the System Landscape Directory. It is the part of the data that is delivered by SAP. We recommend that you always use the latest version of SAP CR Content. This is located on the SAP Support Portal on the "SAP Support Packages & Patches" page. The following items are available here:
1. The current CIM data model as the file cimsap....zip
2. A current SAP CR Content update as the file CRDelta....zip
The SAP CR Content is independent from the SLD release. Therefore, you must always import the latest SAP CR Content into each SLD. The Support Package numbering has no connection to the Support Packages of other components or products. The SAP CR Content is delivered for all releases. SAP CR CONTENT can be imported in live operation; downtime is not required. The runtime is in the range of 1 to 30 minutes. A user must have administration authorization to import the update into the System Landscape Directory. The AS Java system in which the SLD is installed must have at least SAP NetWeaver Version 2004. If the SLD is used as a cluster, you must observe the information in SAP Note 825116 for SAP NW 2004.
Solution
1. Determine the data model version and SAP CR Content version that are available in your SLD:
Choose "Administration -> Details -> Data" to see the current CIM model version and the version of the SAP CR Content (for example, 1.5.32 as the model version and SAP_CR 3.10 as the content version).
If no SAP CR Content exists in the SLD, you must initially fill the SLD first. When you install the system, this provides an initial content. The instructions for configuring the SLD are available in the SLD user manual at:
https://scn.sap.com/docs/DOC-8042.
2. Go to the SAP Support Portal and download the required updates.
The SAP CR CONTENT is available at https://support.sap.com/patches. Choose:
"A-Z Alphabetical List of Products -> A-Z Index Support Packages and Patches -> C -> SAP CR CONTENT".
669669 - Update of SAP System Component Repository in SLD
Version 49 Validity: 06.05.2015 - active Language English
Released On 06.05.2015 12:30:56
Release Status Released for Customer
Component BC-CCM-SLD System Landscape Directory / Component Repository
SV-SMG-LDB Landscape Management
Priority Recommendations / Additional Info
Category Release planning information
Other Components
You must first download the current CIM model. You can find this under SAP CR CONTENT UP TO ... (highest available date for a year) with the file name cimsap....zip. If there are several of these files, use the latest one. If there is no such file, no update has yet been published for this version and you fall back upon the previous version of SAP CR CONTENT. Caution: In the case of a model version below 1.4.31, you must first follow the instructions in SAP Note 907897.
Each SAP CR CONTENT support package contains a "cimsap....zip" file, even if the CIM model version has not changed since the previous version. Generally, import cimsap....zip before the CRDelta....zip, even if you already have this model version in the SLD.
Depending on the initial version of your SAP CR Content, you may have to import several CR delta upgrades. The following list contains the required updates.
From 1.x to 2.0: Support portal entry point: SAP MASTER DATA FOR SLD 1.0 End of maintenance reached; no longer available. From 2.x to 3.0 Support portal entry point: SAP MASTER DATA FOR SLD 2.0 File name: CRDelta1418_0-10003379.ZIP Comment: See below. Switch from 2.0 to 3.0 From 3.x to 4.0 Support portal entry point: SAP CR CONTENT UP TO 2007 File name: CRDelta1511_0-10004549.ZIP From 4.x to 5.0 Support portal entry point: SAP CR CONTENT UP TO 2008 File name: CRDelta41514_0-10006428.ZIP From 5.x to 6.0 Support portal entry point: SAP CR CONTENT UP TO 2009 File name: CRDelta51509_1-20005942.ZIP From 6.x to 7.0 Support portal entry point: SAP CR CONTENT UP TO 2010 File name: CRDelta61610_0-20006535.ZIP From 7.x to 8.0 Support portal entry point: SAP CR CONTENT UP TO 2011 File name: CRDelta71611_0-20008269.ZIP From 8.x to 9.0 Support portal entry point: SAP CR CONTENT UP TO 2012 File name: CRDelta81612_0-20009730.ZIP From 9.x to 10.0 Support portal entry point: SAP CR CONTENT UP TO 2013 File name: CRDelta91615_0-20010858.ZIP From 10.x to 11.0 Support portal entry point: SAP CR CONTENT UP TO 2014 File name: CRDelta101613_0-20012029.ZIP From 11.x to 11.y (latest version) Support portal entry point: SAP CR CONTENT UP TO 2015 File name: CRDelta1116*.ZIP Comment: Use the latest file. Example: You are using the current CR Content 9.5. Download the latest data model cimsap....zip and the following files: CRDelta91615_0-20010858.ZIP CRDelta101613_0-20012029.ZIP Also download the latest CRDelta1116*.ZIP file.
3. Import the updates
The system does not unpack the archives but imports them into the SLD as a ZIP file. For some archives, you must note particular rules that are described at the end of this SAP Note. Before the import, check whether you must consider further details in your case.
Choose "Administration -> Import" to first import the model update "cimsap....zip". You cannot ignore any warning that may occur telling you that a newer model has already been loaded. You must therefore not choose "Import Anyway", but you must choose "Cancel Import" as you must not import an old model on top of a newer model. You can import the same model version and this does not lead to any warning. For more information, see SAP Note 1045423.
Then import the content update file or files ("CRDelta....zip"). The update contains all of the changes as of the initial status (= aggregate of all updates). The program only imports those changes that are not already present in your Component Repository - it ignores all changes that you have already imported. When you repeat the import of a delta that has already been successfully imported, the import is not carried out, which is correct. You must also not ignore any warnings here, but you must choose "Cancel Import". The warning is usually caused by an error when selecting the entry point on SAP Service Marketplace. Repeat the solution steps 1 and 2.
4. In SLD under "Administration" -> "Details" -> "Data", check the version of the content that you have imported.
Special features of individual packages The delta CRDelta1511_0... contains the deletion of all scenario data and solution data that is no longer required. For this reason, the import of the delta takes between 15 and 30 minutes. Furthermore, the delta "CRDelta1511_0..." requires the model 1.5.32 or higher. You must therefore first import the file "cimsap1511_0...". The delta CRDelta61608_0... exceeds the size of 20 MB. In older system landscape directories (SLD), however, the file upload is limited to 20 MB. If the file upload terminates with a corresponding error message, increase the limit to 40 MB as described in SAP Note 1326081. The delta CRDelta81612_0... contains an enhancement of the scope of the software catalog data with alternative product components. Due to this enhancement, the data volumes and the import time are higher than normal by approximately a factor of 4.
Upgrade from Version 2.0 to Version 3.0
To upgrade from SAP MASTER DATA FOR SLD 2.0 to SAP CR CONTENT UP TO 2007 (technical version is 3.0), you are required to perform the following steps:
1. Import the last delta from 2.0. This comprises model 1.5.20 (cimsap1418_...zip) and the content delta (CRDelta1418_...zip). Before you import the new model, check the parameter RejectUnsupportedCIMQualifiers and the existing model version. Proceed in accordance with SAP Note 907897.
In 6.40 and 7.0 SP0 - SP9, the model import (file "cimsap....zip") takes 30 - 60 minutes; as of Release 7.0 SP10, this part takes less than 1 minute.
2. You can obtain the next update from SAP CR CONTENT UP TO 2007 (3.0).
Validity
This document is not restricted to a software component or software component version
References
This document refers to:
SAP Notes
This document is referenced by:
SAP Notes (34)
1891566 Repair of LMDB CR Content
1867494 Upgrading application server ABAP running on an SAP HANA DB
1751175 SAP CR content anomalies in SLD or LMDB
1701770 LMDB CIM Model and CR Content prerequisite
1625376 SAP CR CONTENT Update in SAP Solution Manager
1473107 SLD Content in Partner Domain
1453023 Missing CR content in SLD prevents product registration
1393764 SAP Component Repository update (from 1.x to 2.0) in SLD
1326081 SLD import error: "Posted content length exceeds limit"
1309239 Configuration Wizard: PI NetWeaver initial setup
1308707 PBF Custom Development Solution - Java
1305716 PI CTC: Product version 'SAP NETWEAVER PI 7.x' not found
1245560 Composite SAP Note : XSS Documentation
1145663 Initial Configuration of Usage Type DI: Common problems
1093168 Repair of SLD CR content
1087704 Locking entire SLD namespace during import
1045423 Warnings and error messages during SLD import
954820 Compatibility of SLD in the system landscape
938436 Registering the SCM optimizer on the SLD
907897 Errors when updating SAP CIM model to Version 1.5 or higher
836093 IFR: Updating the application components => error
825116 SLD in cluster mode (Release 6.40, NW2004)
805258 Incorrect SLD content of CRDelta13_10-10002694.zip
776433 Update of the SLD Data Model after a Support Package
679352 XI2.0 Support Package 04 - List of most important changes
1309239 Configuration Wizard: PI NetWeaver initial setup
1308707 PBF Custom Development Solution - Java
925796 Import of CRM java components into NWDI failes
1305716 PI CTC: Product version 'SAP NETWEAVER PI 7.x' not found
836093 IFR: Updating the application components => error
1962139 Importing a specific version of SAP CR content in SLD
2216460 SAP Budgeting and Planning for Public Sector 1.0 - Java
2169463 Error when Updating the Java System History
1867494 Upgrading application server ABAP running on an SAP HANA DB
805258 Incorrect SLD content of CRDelta13_10-10002694.zip
1891566 Repair of LMDB CR Content
1751175 SAP CR content anomalies in SLD or LMDB
1093168 Repair of SLD CR content
1087704 Locking entire SLD namespace during import
1625376 SAP CR CONTENT Update in SAP Solution Manager
1738258 System Copy of Systems Based on SAP NetWeaver 7.1 and Higher
1983424 Extension of AS JAVA SLD Data Supplier
907897 Errors when updating SAP CIM model to Version 1.5 or higher
1977240 Extension of the AS ABAP SLD Data Supplier (RZ70)
938436 Registering the SCM optimizer on the SLD
1453023 Missing CR content in SLD prevents product registration
1701770 LMDB CIM Model and CR Content prerequisite
1045423 Warnings and error messages during SLD import
1326081 SLD import error: "Posted content length exceeds limit"
679352 XI2.0 Support Package 04 - List of most important changes
1145663 Initial Configuration of Usage Type DI: Common problems
825116 SLD in cluster mode (Release 6.40, NW2004)
954820 Compatibility of SLD in the system landscape
1473107 SLD Content in Partner Domain
1393764 SAP Component Repository update (from 1.x to 2.0) in SLD
1768158 System Copy of Systems Based on SAP NW 7.0 / 7.0 EHP 1-3
1387767 PBF: Configure NWDI for Visual Composer
776433 Update of the SLD Data Model after a Support Package
1245560 Composite SAP Note : XSS Documentation