88.9mm x 4.8mm Pipe Production Plant
ES-11202
Technical Data
maker VAI SEUTHE year 1980/89/98 strip width 120 - 285 mm strip thickness 1,5 - 4,8 mm reference material (tensile strength) max. 630 N/mm²
tube- - round tubes 38 - 88,9 mm - square tubes 30 x 30 - 70 x 70 mm - rectangular tubes 40 x 20 - 110 x 30 mm speed max. 120 m/min. working direction right → left available roll sets The line is equipped as follows:
entry part up to strip accumulator not available
forming device design interchangeable plates/linear forming device no. of horizontal stands no. of vertical stands horizontal stands' drive 4 x 46 kW
welding device HF maker Emmedi year 1989 design transistor welding capacity 350 kW outside scrappers 2 pcs. inside scrappers
cooling
calibrating year 1998 design interchangeable plates twist stand 1 pc. horizontal stands (incl. interchangeable set) 8 pcs. vertical stands (incl. interchangeable set) 8 pcs.
calibration stands (incl. interchangeable set) 6 pcs. Turk heads 2 pcs. Drive 3-phase-current motors driving power 7 x 44 kW ratio section width : section height max. 1:4
eddy current testing Krautkrämer
cut-off length measuring metering wheel design interchangeable plates
saw blade- saw blade drive feed control servo drive
runout roller table with accelerator ejector with scrap bucket
stacker Mair
separation
buffer
bundling rectangular/hexagonal
lowering of tube stacks electro-mechanic
hydraulics Rexroth
electrics Siemens year 1998
PLC S5-135U
All technical data are based on supplier’s information and therefore without obligation for us. The machines are subject to prior sale; this offer is subject to our General Terms and Conditions.