© 2003 - 2013 Dataland Software
Agenda At Once
Agenda At OnceUser Manual
by Dataland Software
Thank you for choosing Agenda At Once. We are certainthat you won't be dissapointed with its abilities to help youbecome or remain organized.
We hope that this manual will serve you well as an additionalguide.
IContents
I
© 2003 - 2013 Dataland Software
Table of Contents
Part I Introduction 2
................................................................................................................................... 41 Main screen
................................................................................................................................... 62 Default keyboard shortcuts
Part II Basic concepts 10
................................................................................................................................... 121 To-do pane
................................................................................................................................... 152 Schedule pane
................................................................................................................................... 173 Contacts pane
................................................................................................................................... 184 Quick Notes pane
Part III User interface 20
................................................................................................................................... 201 Main menu
.......................................................................................................................................................... 20File menu
.......................................................................................................................................................... 21To-do menu
.......................................................................................................................................................... 23View menu
.......................................................................................................................................................... 24Quick Notes menu
.......................................................................................................................................................... 25Schedule menu
.......................................................................................................................................................... 26Contacts menu
.......................................................................................................................................................... 27Tools menu
................................................................................................................................... 282 Toolbars
.......................................................................................................................................................... 28Main toolbar
.......................................................................................................................................................... 29To-do toolbar
.......................................................................................................................................................... 30Schedule toolbar
.......................................................................................................................................................... 31Contacts toolbar
.......................................................................................................................................................... 32Quick Notes toolbar
................................................................................................................................... 333 Dialogs
.......................................................................................................................................................... 33Task properties
.......................................................................................................................................................... 36Scheduled task properties
.......................................................................................................................................................... 38Contact properties
.......................................................................................................................................................... 40Notes editor
.......................................................................................................................................................... 41Categories
.......................................................................................................................................................... 42Attachment editor
.......................................................................................................................................................... 44Filter
.......................................................................................................................................................... 45Find
.......................................................................................................................................................... 46Options
......................................................................................................................................................... 47General
......................................................................................................................................................... 48User Interface
......................................................................................................................................................... 49Database Shortcuts
......................................................................................................................................................... 50To-do
......................................................................................................................................................... 51Schedule
......................................................................................................................................................... 52Contacts
......................................................................................................................................................... 53Quick Notes
......................................................................................................................................................... 54Reminder
......................................................................................................................................................... 54Global Shortcuts
Agenda At OnceII
© 2003 - 2013 Dataland Software
......................................................................................................................................................... 56Security
.......................................................................................................................................................... 57Print
......................................................................................................................................................... 57To-do
......................................................................................................................................................... 59Schedule
......................................................................................................................................................... 60Contacts
......................................................................................................................................................... 61Quick Notes
.......................................................................................................................................................... 62Deleted items
.......................................................................................................................................................... 63Backup
.......................................................................................................................................................... 64Compact and Repair
.......................................................................................................................................................... 65Import
.......................................................................................................................................................... 66Export
.......................................................................................................................................................... 67Plugins
.......................................................................................................................................................... 68Customize toolbars
Part IV Advanced using 72
................................................................................................................................... 721 To-do inline editing
................................................................................................................................... 742 Drag and drop remarks
................................................................................................................................... 773 Aggregated completion calculation
................................................................................................................................... 794 Multi-user support
................................................................................................................................... 825 Install to portable device
................................................................................................................................... 846 GTD - Getting Things Done
................................................................................................................................... 867 Security
................................................................................................................................... 878 Command line
Part V Other information 90
................................................................................................................................... 901 Credits
................................................................................................................................... 922 Support
Index 93
Introduction
Part
I
Agenda At Once2
© 2003 - 2013 Dataland Software
1 Introduction
How many personal organizers you have tried to use in the past? With how many of them you were
satisfied? How many of them fulfill the most basic requests for this kind of software: to be simple to
use, fast, low memory consuming and yet powerful enough to support all tasks that you need
to accomplish?
Agenda At Once could be just what you are looking for a long time. A carefully designed user
interface reduces the number of mouse clicks and keyboard presses, and memory consuming is so low
that you will not notice any delay while working.
Features overview
§ Simultaneous connection from multiple users
§ Multiple databases support
§ To-do list hierarchically organized as tasks and subtasks
§ Percent based tasks completion
§ Manual and drag & drop task scheduling and planning
§ Categorizing tasks by Categories and Assignees (multiple selections allowed)
§ GTD (Getting Things Done) ready
§ Tasks linked to each other
§ Enhanced and clickable systray tooltip (tasks for today)
§ Powerful filters can be saved for future use
§ Daily/Weekly/Monthly planner view
§ Auto and manual sorting
§ To-do and schedule recurring
§ To-do and schedule reminder
§ Quick Notes – simple notes management
§ Printing possibility with advanced reports
§ Simple and fast Full Text Search
§ CSV import and export
§ Password protection and file encryption
§ Low memory and disk requirements
§ Can be installed to USB stick drive
§ Very customizable (toolbars, behavior, keyboard shortcuts, etc)
79
12
74
41
84 84
44
15
18
57
45
65 66
86
82
46
Introduction 3
© 2003 - 2013 Dataland Software
Although Agenda At Once is designed to be intuitive and user friendly, you may want to read this
manual to achieve maximum functionality. It especially refers to Keyboard shortcuts section.
Manual contents
Manual is divided into several chapters.
1. Introduction Chapter Introduction (you are reading it right now) contains general
information about software and this manual.
2. Basic concepts Second chapter helps you start using Agenda At Once by explaining
basic.
3. User interface Third chapter is a detailed reference of user interface elements such are
menus, toolbars and windows.
4. Advanced using Fourth chapter contains more detailed information about some
advanced topics.
5. Other information Last, fifth chapter contains additional, mostly non-technical information.
Agenda At Once4
© 2003 - 2013 Dataland Software
1.1 Main screen
Agenda At Once main window consists of:
1. Main menu and toolbar
2. Main program area (see below)
3. View tabs
4. Status bar
Main program area
In order to keep all relevant data always visible, Agenda At Once introduces combined view which
means that main program area is divided into up to four sub-areas. Each quadrant can contain one of
four panes. Default layout looks like in the image above, or:
Introduction 5
© 2003 - 2013 Dataland Software
To-do pane Schedule pane
Notes pane Empty (invisible)
Of course, panes can be resized to match your needs, and layout can be configured via options
window.
Sometimes you temporary need more space when working with Agenda At Once, so it is possible to
maximize each pane to full area. In addition to standard maximize/restore buttons or double-clicking
at pane title, you can conveniently use View tabs at the bottom of the screen (3).
See also
Basic concepts
Layout options
To-do pane
Schedule pane
Contacts pane
Quick Notes pane
46
10
48
12
15
17
18
Agenda At Once6
© 2003 - 2013 Dataland Software
1.2 Default keyboard shortcuts
For best utilization and fast using we encourage you to use keyboard shortcuts, especially to-do
related. Also, you may want to configure Global Shortcuts . Please note that keyboard shortcuts can
be easily reconfigured by using Customize Toolbars option.
General
Ctrl+P Print data
Ctrl+F Full text search
Ctrl+O Application options
Esc / Ctrl+M Minimize to system tray
Ctrl+F1 – CTRL+F12 Switch database
F1 Help
F5 Refresh data
Alt+F4 Close application
To-do related
Ctrl+T Add new root task (dialog)Ctrl+Y Add new subtask of selected task (dialog)Ctrl+E /
Ctrl+Enter
Edit selected task (dialog)
Ctrl+= Increase task priorityCtrl+- Decrease task priorityCtrl+] Increase completion of selected task by 10%Ctrl+[ Decrease completion of selected task by 10%Ctrl+1 Set completion of selected task to 100%Ctrl+0 Set completion of selected task to 0%Ctrl+Alt+S Finds and selects linked scheduled taskCtrl+Alt+Up Move task upCtrl+Alt+DownMove task downCtrl+Alt+Left Move task to parentCtrl+Alt+Right Move task one level downCtrl+Right Expand selected taskCtrl+Left Collapse selected taskCtrl+Tab Switch to next filter tabShift+Ctrl+TabSwitch to previous filter tabIns Fast add new task at same level as selected task (inline)Ctrl+Ins Fast add new subtask to selected task (inline)Enter / F2 Edit selected value (inline)Del Delete selected task(s)Arrow keys Move through tasks and columns
54
68
Introduction 7
© 2003 - 2013 Dataland Software
Fast type Incremental search through task description
Schedule related
Ctrl+S Add new scheduled task (dialog)
Ctrl+R Edit selected scheduled task (dialog)
Ctrl+Alt+T Finds and selects linked to-do task
Arrow Up / Down Moving task up or down
Shift + Up / Down Resizing up or down
Drag and drop Moving task
Ctrl + Drag and drop /
Alt + Drag and drop
Detach task from planner (to allow drop to to-do or planner
header)
Contacts related
Ctrl+K New contact
Ctrl+L / Enter Edit contact
Arrow keys Moving through list
Quick Notes related
Ctrl+N New note
Ctrl+Alt+D Insert Date and Time to note
Ctrl+Alt+Left Previous note
Ctrl+Alt+Right Next note
Ctrl+Shift+L Switch bulleted / numbered list type
See also
Global Shortcuts
Database Shortcuts
Customize toolbars
54
49
68
Basic concepts
Part
II
Agenda At Once10
© 2003 - 2013 Dataland Software
2 Basic concepts
While designing Agenda At Once we tried to make user interface as simple as possible and follow
natural method of time planning. As it becomes mature and well rounded product, we kept basic
principles while adding additional features in unobtrusive way. By default, Agenda At Once shows all
important data in one screen (Combined View ), and this principle eliminates unnecessary clicks
and key presses.
Natural method of time planning may consist of following steps:
1. Add task to to-do list
It should be as simple as possible. Using pen and paper is probably still fastest way to do this, but
than you wouldn't be able to use advanced features that computers allow. By using our software,
tasks can be entered just by pressing Insert key and typing its description.
2. Approximate task duration and deadline date (optional)
This step will help you with later scheduling. However, not every task is intended to be scheduled, so
this step might be skipped.
3. Schedule fixed appointments
You should reserve time for appointments that are hard or impossible to postpone (meetings, trips,
vacations and other fixed appointments). If you enter these appointments first, you will have a nice
overview of free time that you can fill anyway you find appropriate.
4. Assign to-do tasks to free time
Browse through to-do list and determine when each one of them can be done. Arrange tasks
considering priorities and earlier defined schedule. In our application, this step is easily completed by
simple drag and drop mechanism: drag task from to-do list and drop it to planner. You can also drag
multiple tasks at same time and application will automatically determine exact times while taking in
consideration durations.
4
Basic concepts 11
© 2003 - 2013 Dataland Software
5. Adjust plan afterwards
If something came up and you were unable to accomplish a task at planned time, you should be able
to correct that. Agenda At Once allows you to reschedule tasks simply by moving them. You can also
drag scheduled task back to to-do list, which means that you wish to postpone it but you are still not
sure about new time. Scheduled task will become a to-do task and you can get back to it later when
you are ready to consider it again.
Although we probably haven't told anything that you already didn't know, our wish was to present
short overview of our thoughts and application concept. All steps are easily covered by Agenda At
Once via to-do list management , schedule and their cooperation .12 15 74
Agenda At Once12
© 2003 - 2013 Dataland Software
2.1 To-do pane
To-do pane is intended to give you simple and powerful functions for managing to-do list tasks.
Actually, to-do list is not quite a list – it's a tree. Because "real life" task can be divided into more
subtasks, we decided to make Agenda At Once in a same manner.
To-do list (tree) manipulation can be accomplished by using main menu , to-do toolbar ,
context (right-click) menu or by inline editing . In addition, for your convenience, refer to tree
keyboard shortcuts .
By default, some fields of parent tasks (tasks that have subtasks) cannot be editing by hand. For
example, duration is calculated as a sum of subtask durations, "By" date is a maximum subtask "By"
date, and completion percent is average subtask completion percent. This behavior can be easily
changed by using Aggregate parent's properties option. Note that calculated (aggregated) data is
enclosed in square brackets ([ ]) and slightly dimmed for easy recognition.
List can be sorted by clicking at column header and clicking it again causes sorting to go in reverse
order. Note that tasks are sorted within the scope of same parent task. Additionally, subtasks can be
sorted differently than root tasks.
We have tried to add as much columns as possible, but it's clear that too much data in the list can be
overwhelming. That's why we implemented possibility to turn on or off individual columns and
rearrange columns according to your preference.
If you check Completed Tasks at the End option, completed tasks will always be sorted at the end
of the list (again, within parent task). Hide Completed Tasks option hides completed tasks in the list
so you can focus on unfinished tasks.
21 29
72
6
50
Basic concepts 13
© 2003 - 2013 Dataland Software
Powerful filters allow you to focus to a specific subset of tasks. It's possible to enter multiple
criteria and you can save a filter which then appears as a tab above a to-do list.
Use drag and drop features extensively so you can easily reorganize and schedule tasks.
Scheduling can be done by dragging one or more tasks to the schedule pane in order to assign them
to a specific time. If you entered task duration earlier, it will automatically adjust it's duration in
schedule pane. Also, if you moved more than one task at the same time, they will be arranged one by
one.
When task is moved from to-do list to schedule, it will remain in the to-do list. Task and its
corresponding scheduled tasks will be linked together, so you can quickly jump between them. In
to-do list, task that have scheduled respondent will be marked with icon of wrist watch in Scheduled
column.
Columns reference
Name Description Directly editableRow number Absolute row number NoPriority Task priority - 9 possible choices YesColor Task color YesTask Description YesFinished Check box - checked only if 100% completed YesDuration Task duration Yes
Created Date Date of task creation YesCompleted Date Date of task completion Yes (if completed)By Due date YesCategories List of assigned categories Yes (typing or list)Assignees List of assigned contacts Yes (typing or list)Scheduled Indication that task is scheduled among with
number of linked appointments
No
Sch. Duration Total duration of scheduled tasks NoAttachments Indication that attachments are present among with
number of them
Yes (attach. editor)
Notes present Indication that notes are present Yes (task window)Status Task status YesCompleted Completion percent YesPath Task's parents (location) - visible only if Flat view
is selected and cannot be turned off
No
44
74
21
Agenda At Once14
© 2003 - 2013 Dataland Software
See also
To-do menu
To-do toolbar
To-do inline editing
Task properties
To-do options
Keyboard shortcuts
Drag and drop remarks
21
29
72
33
50
6
74
Basic concepts 15
© 2003 - 2013 Dataland Software
2.2 Schedule pane
You can see and manage scheduled tasks here. Schedule pane is divided into two areas:
· Multi-month calendar area (top or left, depending on preference)
· Graphical view (bottom or right, depending on preference)
Multi-month calendar is intended for choosing a date period you want to see. If date number is
drawn in bold, it means that you have at least one defined task for that day. Click at calendar text
saying "Today…" jumps view to today's date. Black arrows can be used to change visible month(s) by
one increment or decrement, and click on month name at the top opens popup menu for fast month
and year switching.
Graphical view can be switched between one day, multiple days (side by side), week and
month view. One and multiple days view shows time of the day (in a selected resolution ) with
scheduled tasks as rectangles. You can move rectangles (tasks) up or down and resize them (i.e.
change duration) if you position mouse pointer above the top or bottom horizontal line. Note mouse
pointer shape to be sure what operation will be executed. Moving task by mouse moves task inside a
planner area. If you wish to "unglue" task from planner and drop it to a header (as a whole day task)
or to to-do list, press Ctrl key once while moving. Mouse pointer will change to indicate different
method of moving. See Drag and drop remarks chapter for detailed information.
Task rectangle contains task description, icons and notes if present. Icons are explained in this table:
25
74
Agenda At Once16
© 2003 - 2013 Dataland Software
Completion - click to toggle completion (task must be selected first)
Reminder - indicates that task has an active reminder
Recurrence - indicates that task is repeated over the time
Link - task is linked to a to-do task
Inactive - task is inactive (i.e. canceled meeting)
Delegated - task is delegated to someone else
Deferred - task is postponed or delayed
Attachments - task has attachments
If you want to see more than one day at the same time, you can choose custom number of days to
see them side by side, or switch to week or month view for quick overview.
See also
Schedule menu
Schedule toolbar
Scheduled tasks properties
Schedule options
Keyboard shortcuts
Drag and drop remarks
25
30
36
51
6
74
Basic concepts 17
© 2003 - 2013 Dataland Software
2.3 Contacts pane
This is simple contact management pane. Originally, Agenda At Once wasn't planned to be a "most
ultimate" contact management solution, so we are trying to keep it simple while allowing basic
operations that will satisfy most users.
Pane consists of main card list and alphabetic index at the left for quick searching.
See also
Contacts menu
Contacts toolbar
Contact properties
Contacts options
Keyboard shortcuts
26
31
38
52
6
Agenda At Once18
© 2003 - 2013 Dataland Software
2.4 Quick Notes pane
Quick Notes are organized solely by date and time of the creation that cannot be changed by user.
Also, Quick Notes pane is used to show and edit notes contained within selected task or contact,
which is an additional convenience. This behavior can be turned off in options dialog.
Maroon area above note text box shows date and time of note creation or task description (if it's a
note contained in some other item). If this area is empty, typing text into the box it will automatically
create a new note.
Notes support simple formatting (Rich Text Format) - just use an incorporated toolbar or standard
keyboard shortcuts. Quick Notes navigation can be accomplished by Previous/Next Note toolbar
buttons or by combo box. You can also save and load notes to/from file.
See also
Quick Notes menu
Quick Notes toolbar
Quick Notes options
Keyboard shortcuts
48
24
32
53
6
User interface
Part
III
Agenda At Once20
© 2003 - 2013 Dataland Software
3 User interface
3.1 Main menu
3.1.1 File menu
This menu contains basic file and print operations.
New Database Create new database file (*.aao)
Open Database Open existing database file (*.aao)
Recent Databases List of recently used databases
Save Database As... Save database under another name
Database Shortcuts Configure database shortcuts
Refresh F5 Refresh data
Print Ctrl+P Print data
Import Import to-do, scheduled tasks, contacts,
vCalendar / iCalendar
Export Export to-do, scheduled tasks, combined,
contacts, vCalendar / iCalendar
Hide to Systray Esc Minimize application to system tray
Exit Alt+F4 Close application
See also
Main toolbar
Database shortcuts
Import
Export
49
57
65
66
28
49
57
65
66
User interface 21
© 2003 - 2013 Dataland Software
3.1.2 To-do menu
Here you can find options to manipulate to-do items.
New Task Ctrl+T Create new to-do task
New Subtask Ctrl+Y Create new subtasks
Edit Task Ctrl+E /
Ctrl+Enter
Edit selected task
Delete Task Delete selected tasks
Duplicate Task Ctrl+U Duplicate selected tasks
Cut Ctrl+X Cut selected tasks to clipboard
Copy Ctrl+C Copy selected tasks to clipboard
Paste Ctrl+V Paste tasks from clipboard
Priority Increase Ctrl+= Increase task priority
Priority Decrease Ctrl+ - Decrease task priority
Set Completed Completion options
Increase by 10% Ctrl+] Increase completion by 10%
Decrease by 10% Ctrl+[ Decrease completion by 10%
100%
80%, 50%, 20%
0%
Ctrl+1
Ctrl+0
Set completion to 100% (finished)
...to 80, 50 or 20%
...to 0%
Schedule Task To... Schedule task to a specific date and time
Go to Schedule Ctrl+Alt+S Jump to linked scheduled task
Task Up Ctrl+Alt+Up Move task up
Task Down Ctrl+Alt
+Down
Move task down
Move To Parent Ctrl+Alt
+Left
Move task one level up
Move Level Down Ctrl+Alt
+Right
Move task one level down
Manual Sorting Manual sorting enabled
Sort Subtasks By Subtask sorting options
Agenda At Once22
© 2003 - 2013 Dataland Software
See also
To-do pane
To-do toolbar
Task properties
To-do options
12
29
33
50
User interface 23
© 2003 - 2013 Dataland Software
3.1.3 View menu
In this menu you can set various view options.
Style Select visual style (skin)
Toolbars Toolbar options
View pane View pane (tabs) visibility
Filter pane Filter pane visibility
Completed Tasks at the
End
Sort completed task to the end of list
Hide Completed Tasks Don't show completed tasks
Flat View Ctrl+B View leaf (non-parent) tasks only
Expand Selected Expand selected tasks
Collapse Selected Collapse selected tasks
Expand All Expand all visible tasks
Collapse All Collapse all visible tasks
Combined Alt+0 Switch to combined view
To-do Alt+1 Maximize To-do pane
Schedule Alt+2 Maximize Schedule pane
Contacts Alt+3 Maximize Contacts pane
Notes Alt+4 Maximize Notes pane
Deleted Alt+5 View deleted items
See also
Main screen
Customize toolbars
Deleted items
44
4
12
15
17
18
62
4
68
62
Agenda At Once24
© 2003 - 2013 Dataland Software
3.1.4 Quick Notes menu
Here you can find options to manipulate notes.
New Note Ctrl+N Create new quick note
Delete Note Delete selected quick note
Load Note Load file content into the note (*.txt or *.rtf)
Save Note As... Save note content to a file (*.txt or *.rtf)
Insert Date and Time Ctrl+Alt+D Insert current date and time into the note
Attachments Ctrl+Alt
+Left
View and edit attachments
Previous Note Ctrl+Alt
+Left
Go to previous Quick Note
Next Note Ctrl+Alt
+Right
Go to next Quick Note
Cut Ctrl+X Cut selected text to clipboard
Copy Ctrl+C Copy selected text to clipboard
Paste Ctrl+V Paste text from clipboard
Paste Special... Shift+Ctrl
+V
Opens "Paste Special" window
See also
Quick Notes pane
Quick Notes toolbar
Quick Notes options
Attachment editor
42
18
32
53
42
User interface 25
© 2003 - 2013 Dataland Software
3.1.5 Schedule menu
Here you can find options to manipulate scheduled tasks.
New Scheduled Task Ctrl+S Create new scheduled task
Edit Scheduled Task Ctrl+R Edit selected scheduled task
Delete Scheduled
Task
Delete selected scheduled task
Duplicate Scheduled
Task
Ctrl+I Duplicate scheduled task
Go to Today Jump to today
One Day One day view
Custom Days Multiple days side by side
Week Weekly view
Month Monthly view
Time Resolution Change time resolution
Show Calendar Calendar visible
Go to To-do Ctrl+Alt+T Jump to linked to-do task
See also
Schedule pane
Schedule toolbar
Scheduled tasks properties
Schedule options
15
30
36
51
Agenda At Once26
© 2003 - 2013 Dataland Software
3.1.6 Contacts menu
Here you can find options to manipulate contacts.
New Contact Ctrl+K Create new contact
Edit Contact Ctrl+L Edit selected contact
Delete Contact Delete selected contacts
Send E-mail Send e-mail to selected contacts
Go to Web Go to web sites of selected contacts
See also
Contacts pane
Contacts toolbar
Contact properties
Contact options
17
31
38
52
User interface 27
© 2003 - 2013 Dataland Software
3.1.7 Tools menu
Here you can find additional and advanced options.
Find Ctrl+F Search all items
Options Ctrl+O Configure application options
Edit Categories Edit list of categories (tags)
Backup... Backup database
Compact and Repair Compact and repair database
Open Folder Easy locate important files (database file, .INI
settings, backup and error log file)
Plugins Plugins management
See also
Find
Options
Categories
Backup
Compact and Repair
Plugins
45
46
41
63
64
67
45
46
41
63
64
67
Agenda At Once28
© 2003 - 2013 Dataland Software
3.2 Toolbars
3.2.1 Main toolbar
This toolbar contains several most important options in the software.
New Database Create new database file (*.aao)
Open Database Open existing database file (*.aao)
Click at arrow opens menu with recently used
databases
Save Database As... Save database under another name
Refresh F5 Refresh data
Find Ctrl+F Search all items
Options Ctrl+O Configure application options
Print Ctrl+P Print data
Hide to Systray Esc Minimize application to system tray
Exit Alt+F4 Close application
See also
File menu
Tools menu
Customize toolbars
45
46
57
20
27
68
User interface 29
© 2003 - 2013 Dataland Software
3.2.2 To-do toolbar
To-do toolbar contains mostly used to-do options.
New Task Ctrl+T Create new to-do task
New Subtask Ctrl+Y Create new subtasks
Edit Task Ctrl+E Edit selected task
Delete Task Delete selected tasks
Priority Increase Ctrl+= Increase task priority
Priority Decrease Ctrl+ - Decrease task priority
Increase by 10% Ctrl+] Increase completion by 10%
Decrease by 10% Ctrl+[ Decrease completion by 10%
Flat View Ctrl+B View leaf (non-parent) tasks only
Expand All Expand all visible tasks
Collapse All Collapse all visible tasks
Task Up Ctrl+Up Move task up
Task Down Ctrl+Down Move task down
Move To Parent Ctrl+Alt
+Left
Move task one level up
Filter pane Filter pane visibility
See also
To-do menu
View menu
Task properties
Customize toolbars
21
23
33
68
Agenda At Once30
© 2003 - 2013 Dataland Software
3.2.3 Schedule toolbar
Schedule toolbar contains mostly used schedule options.
New Scheduled Task Ctrl+S Create new scheduled task
Edit Scheduled Task Ctrl+R Edit selected scheduled task
Delete Scheduled
Task
Delete selected scheduled task
One Day One day view
Custom Days Multiple days side by side
Week Weekly view
Month Monthly view
Show Calendar Calendar visible
Days Number days to show side by side
See also
Schedule menu
Scheduled tasks properties
Customize toolbars
25
36
68
User interface 31
© 2003 - 2013 Dataland Software
3.2.4 Contacts toolbar
This toolbar contains contact management options.
New Contact Ctrl+K Create new contact
Edit Contact Ctrl+L Edit selected contact
Delete Contact Delete selected contacts
Send E-mail Send e-mail to selected contacts
Go to Web Go to web sites of selected contacts
See also
Contacts menu
Contact properties
Customize toolbars
26
38
68
Agenda At Once32
© 2003 - 2013 Dataland Software
3.2.5 Quick Notes toolbar
Quick Notes toolbar contains mostly used notes options.
New Note Ctrl+N Create new quick note
Delete Note Delete selected quick note
Load Note Load file content into the note (*.txt or *.rtf)
Save Note As... Save note content to a file (*.txt or *.rtf)
Insert Date and Time Ctrl+Alt+D Insert current date and time into the note
Attachments Ctrl+Alt
+Left
View and edit attachments
Previous Note Ctrl+Alt
+Left
Go to previous Quick Note
Next Note Ctrl+Alt
+Right
Go to next Quick Note
See also
Quick Notes menu
Customize toolbars
42
24
68
User interface 33
© 2003 - 2013 Dataland Software
3.3 Dialogs
3.3.1 Task properties
In this window you can edit to-do task.
Description Enter short task descriptionBy day Task must be done before this dayDuration Estimated task duration
You can choose a value from drop-down list or you can type it manually.
When typing, you can type full or abbreviated phrase (for example: "90
minutes", "90min" or "90m")Completed Completion percentScheduled Click here to schedule task to a specific date and timeCreated Date when task is createdColor Task colorPriority Task priorityStatus Task status (Active / Inactive / Delegated / Deferred / Completed)Reminder Reminder options (date and time)Recurring Recurring options (see below)Visible when completed If checked, task will be always visible even if it's completed (useful for
some parent tasks)
Agenda At Once34
© 2003 - 2013 Dataland Software
Categories List of assigned categories (see below)Assignees List of assignees (see below)Notes Notes for the taskAttachments List of attachments
Recurrence options
Recurrence pattern Select patter for recurrent task
Pattern details Depending on selected pattern, set corresponding options here
Range Set ending date for this recurrent task
Exceptions Enter exceptions
Select Categories and Assignees
User interface 35
© 2003 - 2013 Dataland Software
Multiple choices are allowed.
See also
Scheduled task properties
Categories
Notes editor
Attachment editor
36
41
40
42
Agenda At Once36
© 2003 - 2013 Dataland Software
3.3.2 Scheduled task properties
In this window you can edit scheduled task.
Description Enter short task descriptionBegin Start date and time End End date and timeCompleted Completion percentCreated Date when task is createdColor Task colorStatus Task status (Active / Inactive / Delegated / Deferred / Completed)Reminder Reminder options (how much time before start)Recurring Recurring options (same as in To-do task properties )Whole Day Event If checked, task will be placed in the planner headerCategories List of assigned categories (same as in To-do task properties )Assignees List of assignees (same as in To-do task properties )Notes Notes for the taskAttachments List of attachments
33
33
33
User interface 37
© 2003 - 2013 Dataland Software
See also
To-do task properties
Categories
Notes editor
Attachment editor
33
41
40
42
Agenda At Once38
© 2003 - 2013 Dataland Software
3.3.3 Contact properties
In this window you can edit contact.
In this window, fields are mostly self-descriptive.
Assignee
This field must be checked if you wish to assign this person to a task.
User fields
Use these fields for custom data you might need. Titles can be configured in Contact options .
Activities tab
Shows list of tasks that this person is assigned to.
52
User interface 39
© 2003 - 2013 Dataland Software
See also
Contacts options
Notes editor
Attachment editor
52
40
42
Agenda At Once40
© 2003 - 2013 Dataland Software
3.3.4 Notes editor
Apart from editor in Quick Notes pane , same functionality is contained in editors embedded in
other windows (Task properties , Scheduled task properties , Contact properties) .
In Agenda At Once, notes are RTF (Rich Text Format) enabled, which means that you can use
formatting toolbar to highlight parts of text. Elements of the formatting toolbar are, respectively:
§ Font name
§ Font size
§ Font (text) color
§ Background color
§ Bold
§ Italic
§ Underline
§ Align paragraph to left
§ Center paragraph
§ Align paragraph to right
§ Justified paragraph
§ Bulleted / Numbered list (switch type by pressing Ctrl+Shift+L)
It is also possible to paste pictures from the clipboard, but this is not recommended unless pictures
are very small. For larger pictures and files it would be better to use attachments .
See also
Task properties
Scheduled task properties
Contact properties
Attachment editor
18
33 36 38
42
33
36
38
42
User interface 41
© 2003 - 2013 Dataland Software
3.3.5 Categories
You can edit list of categories by choosing Tools | Edit Categories from main menu. Also, while
choosing categories to assign to task, you can see slightly different window. Only difference is that
first column contains check boxes.
Use New and Delete buttons to add new or delete selected category.
See also
Task properties
Scheduled task properties
33
36
Agenda At Once42
© 2003 - 2013 Dataland Software
3.3.6 Attachment editor
Attachment editor is a tool intended to maintain list of files assigned to tasks, notes or contacts.
Picture below shows windowed attachment editor, but same functionality can be found in editor
embedded in Task and Contact properties .
There are three types of attachments.
Linked attachment
It's described by full path to the file that must be present on file system. If database file is shared
between different computers, you should make sure that path doesn't change (i.e. add files from
shared network folders instead from local hard disk). On the other hand, in this case size of database
does not suffer from attachment size.
Embedded attachment
Whole file content is written into the database (compressed). After adding it's safe to delete original
file from hard disk and you don't need to think about access from different computers. However, you
should be careful as extensive use can lead to large database (.aao) file. Size column shows size of
embedded attachment. Note that actual space taken is smaller than indicated here as embedded
content is compressed.
Folder attachment
Basically, it's same as linked attachment, instead it points to a folder - same guidelines apply.
Menu and toolbar options
33 38
User interface 43
© 2003 - 2013 Dataland Software
Add Linked Add linked attachment
Add Embedded Add embedded attachment
Add Folder Add link to a folder
Delete Delete selected attachment
Open Open selected attachment in default editor. If it's
embedded, it is saved to a temporary file first. If file is
edited and saved (Modified time is changed), you can
choose to update database with new content
Save Save selected attachment
Convert to Embedded Convert attachment to embedded
Convert to Linked Convert attachment to linked (you will need to choose
path to save a file)
See also
Task properties
Scheduled task properties
Contact properties
33
36
38
Agenda At Once44
© 2003 - 2013 Dataland Software
3.3.7 Filter
Agenda At Once features powerful and easy to use filters. Filters can be saved for future use, so
they appear as tabs at the top of to-do pane. By right-clicking at tabs you will be able to select an
option to Save, Rename or Delete, and you can move them by dragging tab to the left or right.
Save Save filter
Add rule Add another rule to the filter
Delete filter Delete selected filter
Apply to Schedule Apply this filter to schedule too
Match all / Match any Match all or Match any of defined rules (AND / OR)
Each rule line contains three controls. Use first combo box to choose field. Second combo box
contains list of relations (depending on data type of the selected field), and third control can be text,
list or date editor, again, depending on type of the field.
You can remove specific rule by clicking at [X] button at the right end of each line.
User interface 45
© 2003 - 2013 Dataland Software
3.3.8 Find
Full text search option helps you to quickly find items that contain typed text in any of fields.
Note that software will search only currently visible items. In other words, if Hide completed tasks
option is checked, it will not search through completed tasks. Similarly, it will search only items that
meet active filter.
In the Find text area, type words that you want to search for (separated by space). In the list next
to this box select search method – available options are Any word, All words and Exact phrase.
In Find in select item types that will be processed.
After search is performed, list at the bottom will show all items that match search criteria. If you
select item in the list you can see that specific item is automatically selected in the main window, and
Right-click | Edit option (or double-click) opens item's properties for editing or closer inspection.
Agenda At Once46
© 2003 - 2013 Dataland Software
3.3.9 Options
In this window you can set various application options. Each page contains options for specific area of
application.
· General
· User Interface
· Database Shortcuts
· To-do
· Schedule
· Contacts
· Quick Notes
· Reminder
· Global Shortcuts
· Security
47
48
49
50
51
52
53
54
54
56
User interface 47
© 2003 - 2013 Dataland Software
3.3.9.1 General
General application options.
Show splash screen Show splash (welcome) screen at startup
Start with Windows Start application with Windows
Allow one instance only Allow only one instance of application running
Autodelete Autodelete options
Completed tasks Delete all completed tasks from to-do list at exit
Scheduled tasks Delete scheduled tasks older than specified number of days
Quick notes Delete quick notes older than specified number of days
Autosave Autosave options
On Minimize Automatically save when minimizing
Timed autosave Automatically save at time interval
Auto check for updates Automatically check our web site for updates
Agenda At Once48
© 2003 - 2013 Dataland Software
3.3.9.2 User Interface
User interface options.
Minimizing
Hide on close Hide to systray when closing by [X] window title button
Hide on minimize Hide to systray when clicking at window minimize [ _ ] button
Confirmations
Exit application Show exit confirmation
Delete tasks Show delete tasks confirmation
Combined layout Customize combined view - place panes into one of four containers
To-do font size Enlarge or reduce font size for to-do list (default 8)
See also
Main screen
View menu
4
23
User interface 49
© 2003 - 2013 Dataland Software
3.3.9.3 Database Shortcuts
Configure Ctrl+F1 to Ctrl+F12 shortcuts for quick access to different database files.
Agenda At Once50
© 2003 - 2013 Dataland Software
3.3.9.4 To-do
To-do pane settings.
Aggregate parent's properties If checked, tasks with subtasks will not have own property values,
but they will be aggregated from subtasksAggregate priority If checked, priority of parent task will be shown as maximum of
priorities of subtasks. Otherwise, it will be possible to change it
manuallyCritical "By" date marking Mark "By" dates in red if they are near enoughBold parent tasks Format parent tasks as boldBold root tasks Format root tasks as boldWhole row selection Mark whole row as selectedAnimated open/close Animated open and close node animation (could improve
performance a bit)Hide completed tasks Don't show completed tasksCompleted tasks at the end Sort completed task to the end of listHorizontal grid lines Draw horizontal grid linesVertical grid lines Draw vertical grid linesStrong grid lines Draw strong (thicker) grid linesTask color Determine where task color will be painted. Possible choices:
Nowhere (Color column only), Task text and Task background.
77
User interface 51
© 2003 - 2013 Dataland Software
See also
To-do pane
To-do menu
Aggregated completion calculation
3.3.9.5 Schedule
Schedule pane settings.
Show time Time to show in daily plannerWorking time Start and end of working timeBreak time Start and end of break (lunch) timeWeek starts on First day in week to show on calendarShow current time mark Show tick mark representing current timeShow week numbers Week numbers in calendarShow today's date on
calendar
Indicate today's date on calendar
Working time color Working time background colorNon-working time color Non-working time background colorCalendar layout Month calendar aligned to the top or to the left of pane
12
21
77
Agenda At Once52
© 2003 - 2013 Dataland Software
See also
Schedule pane
Schedule menu
3.3.9.6 Contacts
Contacts pane settings.
User Field 1-4 Caption to show in front of user fields
See also
Contacts pane
Contacts menu
15
25
17
26
User interface 53
© 2003 - 2013 Dataland Software
3.3.9.7 Quick Notes
Quick Notes pane settings.
Use quick notes for item notes
preview
User Quick Notes area to show notes from selected task or contact
Font Change default font for Quick Notes
Sort notes in reverse order Reverse Quick Notes sorting order (newer above older)
Timestamp contains date only When checked, Insert timestamp option will insert current date
only (without current time)
See also
Quick Notes pane
Quick Notes menu
18
24
Agenda At Once54
© 2003 - 2013 Dataland Software
3.3.9.8 Reminder
Reminder settings.
Play sound Play reminder sound
Sound file Custom sound file path. Leave blank for Windows default Notify sound
Repeat if no activity Repeat sound every 10 seconds if there is no mouse movements above
window
See also
Task properties
3.3.9.9 Global Shortcuts
Configure global Windows shortcuts for quick access to Agenda At Once. If used, application will
monitor system wide keyboard presses and react if needed.
33
User interface 55
© 2003 - 2013 Dataland Software
Show Activate Agenda At Once
New task Add new to-do task
New sch. task Add new scheduled task
New contact Add new contact
New quick note Add new quick note
This option requires globalshortcuts.dll file in order to work. If you don't want to use these options,
you can freely delete this file.
Agenda At Once56
© 2003 - 2013 Dataland Software
3.3.9.10 Security
Security options.
Use password Indicates when application will ask for password if file is encrypted
Protect file with
password
Encrypts current database file so it can't be accessed without typing
correct password
Auto-minimize If checked, application will automatically minimize after specified number
of minutes of inactivity
See also
Security 86
User interface 57
© 2003 - 2013 Dataland Software
3.3.10 Print
To print specific data select corresponding page.
· To-do
· Schedule
· Contacts
· Quick Notes
In the toolbar at the top of the Print window you can select and configure printer, choose font size
and define number of copies to be printed.
3.3.10.1 To-do
This tab page allows you to print to-do tasks.
Report type Type of report - see below for detailsAll Print all tasksFiltered Print tasks that match active filter (if applicable)Selected Print selected tasks onlyDate range Print tasks with "By" date in selected rangeGroup By How tasks will be grouped (for Hours scheduled per to-do task report
type)Print... All, pending or completedPrint checkboxes, Select which columns you want to be printedpriorities, categories,
57
59
60
61
Agenda At Once58
© 2003 - 2013 Dataland Software
assignees, notesSummaries only Tasks will not be printed, just summary durations (for Hours scheduled
per to-do task report type)
Report types
Standard
Standard to-do list is printed.
Hours scheduled per to-do task
This report shows tasks and total hours scheduled per tasks. Tasks are grouped by Categories and
Assignees, in selected order.
To-do completion report
This report shows tasks and their completion information (dates, days taken, completion percentage).
One-on-one to-do list print
This report will print the content of the to-do list exactly as it appears on the main screen (including
sorting, filters, column visibility, etc).
User interface 59
© 2003 - 2013 Dataland Software
3.3.10.2 Schedule
This tab page allows you to print scheduled tasks.
All Print all tasks
Filtered Print tasks that match active filter (if applicable)
Date range Print tasks within selected range
Print categories,
assignees, notes
Select which columns you want to be printed
Agenda At Once60
© 2003 - 2013 Dataland Software
3.3.10.3 Contacts
This tab page allows you to print contacts.
All Print all contacts
Selected Print selected contacts only
User interface 61
© 2003 - 2013 Dataland Software
3.3.10.4 Quick Notes
This tab page allows you to print quick notes.
All Print all quick notes
Selected Print selected note only
Date range Print notes created in selected date range
Agenda At Once62
© 2003 - 2013 Dataland Software
3.3.11 Deleted items
If you deleted one of items accidentally or simply changed you mind, you can use Deleted items
option to correct that mistake and undelete it.
When you delete an item, it's not actually deleted; it's rather marked as deleted so it doesn't show
up in standard user interface. If you choose to revert item back it will contain exactly same data as
before deletion.
Use Undelete option to restore item, Delete permanently to remove selected item physically and
Empty deleted to remove all items physically.
User interface 63
© 2003 - 2013 Dataland Software
3.3.12 Backup
In order to keep your data safe, it is advisable to perform regular backups. Agenda At Once helps
you with this by integrating Backup option which can be started manually or automatically, after
specific period of time elapsed.
When this backup window is invoked automatically, 10 seconds countdown will start. If you don't take
any action backup will be performed according to currently selected options.
Backup options are incorporated in database file (.aao), which means that backups can be
accomplished differently for each file. When backup is performed, .aao file is compressed into .zip
archive to save disk space. File name of the archive depends on file name of .aao file and date and
time when backup is executed. For example: "Default 2007-12-23 144117.zip".
Note that because of this old archives are not overwritten by newer version. After some time you can
find lot of old backups in backup folder, so you might want to delete them one in a while.
If you wish to backup file to a temporary location just this time, you can turn off "Remember list path"
option.
Backup action needs exclusive access to a file to ensure that nobody else is changing a database.
See also
Compact and Repair
Multi-user support
64
79
Agenda At Once64
© 2003 - 2013 Dataland Software
3.3.13 Compact and Repair
If you encounter strange problems with database file, you can run Compact and Repair option.
Furthermore, you can run it as part of regular maintenance, because besides of detecting and fixing
database errors and inconsistency, it performs internal data optimization and eliminates unused space
resulting in smaller file.
Before process is started, Agenda At Once will offer to execute backup , so there's no
consequences in case something wrong happens (with critical operation such is this, you can never be
too careful).
Compact and Repair needs exclusive access to a file.
See also
Backup
Multi-user support
63
63
79
User interface 65
© 2003 - 2013 Dataland Software
3.3.14 Import
Import submenu contains options to import data from Comma Separated Values (.CSV) file. These
files can be generated by some other application or by Agenda At Once's Export option. You can
import To-do, Schedule and Contacts.
Import window contains three lists.
Internal fields This is the list of fields that Agenda At Once supports
External fields Fields found in .CSV file (collected from the first (header) line
Connections List of connected fields
After selecting one field from both upper lists, use Add link button to connect them and use Remove
link button to remove existing connection. Auto-connect option connects fields with same names -
you just need to browse through them to correct possible mistakes and/or to add additional links.
See also
Export
66
66
Agenda At Once66
© 2003 - 2013 Dataland Software
3.3.15 Export
Export submenu contains options to export data to Comma Separated Values (.CSV) file. Later, you
can import this file to another application for processing or edit it with some spreadsheet software or
text editor. You can export To-do, Schedule, Combined To-do and Schedule (both types with link
information) and Contacts.
Note: because .CSV files are plain text files, all formatting from notes will be ignored.
See also
Import 65
User interface 67
© 2003 - 2013 Dataland Software
3.3.16 Plugins
Probably each user has own requirements and specific needs, especially when it comes to productivity
applications such is Agenda At Once. As it is hard to accomplish all of them without losing simplicity,
we have decided to implement Plugin system.
This feature is still in experimental phase, so at this moment there is no public plugins available, but
this will hopefully change soon.
Agenda At Once68
© 2003 - 2013 Dataland Software
3.3.17 Customize toolbars
Agenda At Once allows you to customize toolbars per your preferences. Feel free to experiment with
different configurations, and if you wish to revert back to default settings, choose View | Toolbars
from main menu or right-click at any of them to use Reset Toolbars option.
Toolbars
Use these options to set specific toolbar visibility, text options and to set global application style.
User interface 69
© 2003 - 2013 Dataland Software
Commands
After switching to Commands tab, you can drag and drop tool buttons (actions) from and to the
toolbar in order to create most acceptable configuration.
Agenda At Once70
© 2003 - 2013 Dataland Software
Shortcuts
If you don't like the way how we assigned keyboard shortcuts to actions, you can change them
here.
See also
Default keyboard shortcuts
6
6
Advanced using
Part
IV
Agenda At Once72
© 2003 - 2013 Dataland Software
4 Advanced using
4.1 To-do inline editing
It is possible to edit values directly in to-do list by pressing Enter or F2 key (inline editing). We
strongly encourage you to use this feature whenever possible, as it can save you significant amount of
time and increase your productivity.
Not all columns can be edited. For example, Row number, Scheduled duration, Path and
aggregated values are all read only.
Editable columns
Column Explanation
Priority Drop down menu
Color Color selection window
Task description Standard text editor
Finished Simple click sets completion to 100% or 0%
DurationDrop down list, custom typing possible (same as in Task
properties )
Created date
Date editorCompleted date
Due date
Categories Standard text editor where you can type values separated
with ";", and click at [...] button to open a list (same as in
Task properties )Assignees
Status Drop down list
Attachments Attachment editor (window)
Notes Opens standard task properties window
33
41
33
42
Advanced using 73
© 2003 - 2013 Dataland Software
See also
To-do pane
Task properties
Categories
Attachment editor
12
33
41
42
Agenda At Once74
© 2003 - 2013 Dataland Software
4.2 Drag and drop remarks
Drag and drop is an important feature in Agenda At Once that we paid certain amount of attention
to. In this chapter, we will explain how it works.
To-do
Target How can be recognized? What happens?
To-do
Another to-do taskAnother task's description is
marked as selectedTask becomes a subtask of second task
At empty (white) area
of the to-do list
No secondary task is
selected and no blue lineTask is moved to the root level
Between two to-do
tasks (on the same
level) *
Blue line between tasks Task is moved between two tasks
Between two to-do
tasks (on the different
level) *
Blue line between tasks,
but note small arrows at
line ends
Arrow orientation UP: task is moved
after first task (on the same level as first
task)
Arrow orientation DOWN: task is
moved before second task (on the same
level as second task)
Schedule
Date number in
monthly calendar
Calendar date is changed
and planner refreshed
Task is scheduled to the day that mouse
points to
Graphical planner /
Task is scheduled to the exact time (or
day in case target is weekly or monthly
planner)
Advanced using 75
© 2003 - 2013 Dataland Software
* Indicated targets are possible only if Manual sorting is on
Scheduling explanation
When to do task is scheduled, this is what happens:
· Copy of to-do task is made and placed into the schedule at specific date and time (working time
if not specified otherwise)
· Duration of second task is same as duration of original task
· Both tasks become linked to each other
· Number of linked tasks and scheduled duration are updated in the to-do list
· In case of scheduling several tasks at same time, they appear one after another
Schedule
Target How can be recognized? What happens?
Planner bounds
(without Ctrl key)
Four-arrow mouse pointer Moving task around (changing time and/or
date if multiple days are visible)
After pressing Ctrl
key
Pointer changes to an
arrow with rectangle that
represents a paper
Task is "unglued" from the planner, and
now it's possible to drop it outside (see
below)
Anywhere on the
schedule pane
/ Depending on drop target, task is moved
to a specific day and time
Basically same as moving to-do task
to schedule (see above)
To-do list / If task is linked to to-do task
· Scheduled task is removed
· To-do task remains same (except
updated number of linked and
scheduled duration)
21
51
Agenda At Once76
© 2003 - 2013 Dataland Software
If task is NOT linked to to-do task
· Scheduled task is moved and becomes
to-do task
· Placement rules are same as applied in
to-do task moving (see above)
We would like to emphasize different behavior when it comes to moving task from to-do to
schedule and vice versa. This could seem illogical at first sight, so allow us to explain the meaning.
To-do task moved to schedule: "I want to focus on this task at a specified time". Both, to-do and
scheduled tasks exists now (i.e. task is copied).
Scheduled task moved to to-do list: "I will not focus on this task at this time, and I don't know
when I will focus to this task yet" or "I want to postpone this task". Scheduled task is removed, to-do
task is created if it doesn't exists (i.e. task is moved).
See also
To-do pane
Schedule pane
12
15
Advanced using 77
© 2003 - 2013 Dataland Software
4.3 Aggregated completion calculation
In case you set Aggregated parent properties option on, parent completion is calculated
according to task Duration and cannot be manually edited. Following text explains how exactly
aggregated completion is determined.
Subtask without durations
This is an easy case. Parent completion is calculated as sum of all subtask completion divided by
number of tasks. It's a simple average function.
Example 1:
Number of subtasks: 4
Completions: 50%, 20%, 0% and 0%
Parent completion:
(50% + 30% + 0% + 0%) / 4 = 20%
All subtasks with durations
Application makes a corrections based on task durations. Basically, it's same as in first example except
completions are multiplied by durations.
Example 2:
Number of subtasks: 2
Completions: 0% and 50%
Durations: 1h and 2h
Parent completion:
(0% * 1h + 50% * 2h) / (1h + 2h) = 33%
Some subtasks with durations, some without
This is a specific situation. According to Example 2 formula, tasks without durations ("0h") wouldn't
impact aggregated completion at all (X% * 0h = 0). That's why Agenda At Once internally, for this
specific calculation, replaces "Zero" with "Almost zero" durations.
Example 3:
Number of subtasks: 3
50
Agenda At Once78
© 2003 - 2013 Dataland Software
Durations: 0h, 0h and 1h
Completions: 100%, 100% and 20%
Parent completion:
(100% * 0.01h + 100% * 0.01h + 20% * 1h) / (0.01h + 0.01h + 1h) = 22%
Note that in this example it doesn't look like serious problem if we just ignored tasks without durations
(completion would be 20%), but when more subtasks are involved it can make a big difference.
See also
To-do options
To-do pane
50
12
Advanced using 79
© 2003 - 2013 Dataland Software
4.4 Multi-user support
Agenda At Once allows multiple users to access same file from different computers. This is useful for
teams working on same projects - they can share same to-do list, appointments schedule, notes and
contacts. Additionally, you can use Assignees field combined with saved filters to specify who
is in charge for specific task.
Multi-user support is simply achievable by placing database file to a shared folder available through
Windows Network and using File | Open to point to it (example path: "\\SomeComputer
\SomeFolder\TeamFile.aao").
General guidelines
Place file at public location
Make it available for all computers involved at least for most of the time. Avoid placing it on
workstation local disk unless you are sure that access wouldn't be needed when specific workstation is
off or it doesn't get restarted too often. Always-on file server would be ideal place.
Keep file small
Avoid inserting large embedded attachments unless it's really necessary. Delete old and unused
items and do regular Compact and Repair .
Don't use local paths for attachments
When you use linked attachments , make sure you use UNC path so it can be accessible to anyone
on the network. Generally, don't use paths such is "C:\MyFolder\MyFile.doc" as it will not work for
other users (unless they all have "C:\MyFolder\MyFile.doc", which is usually still not what you meant
to achieve). If file is and should remain on your local disk, use "\\MyComputer\MyFolder\MyFile.doc"
instead (of course, MyFolder should be shared and visible on the network).
Make sure you adjust backup path
As backup path is written in the database, same directions apply as mentioned in previous tip.
Additionally, it doesn't matter which computer actually executes backup - last backup time is also part
of the database file, so other users will not be bothered again if it's not necessary.
File locking
33 44
20
42
47 64
42
63
Agenda At Once80
© 2003 - 2013 Dataland Software
Some operations require exclusive access to the file in order to be executed properly. For example,
Compact and Repair and upgrading database (due to new version installation) are a critical low-
level processes that require full control, and locking while doing backup ensures that each user's
instance physically writes everything from the queue.
Locking is handled automatically by software. First, instance that needs full access sends a signal (lock
request) to other users (small info window will appear to indicate this step). Other instances, when
they detect this signal, temporary disconnect from the database, assuming that user is not in the
middle of data editing. Similar info window pops up to inform what's happening. When all instances
are disconnected, first instance continues with operation and, after it's done, sends a signal that
database is available again. If locking fails from whatever reason, after 5 seconds you will see a
warning window and you will be able to choose further action (Retry or Abort). After several
unsuccessful retries (which is not what should happen often), you can call teammates and ask them
to close Agenda At Once completely.
Combined personal and team usage
Usually you would want to keep private data separately from team data. There are two ways how you
can accomplish this.
1. Use Database shortcuts
For easy switching between two databases, use Database Shortcuts . Please note that, if you
choose this method, only alarms defined in currently active file will be executed.
2. Use two (or more) instances
To avoid drawback from first method, you can turn off Allow one instance only option and start
Agenda At Once twice - one instance for each file. It's very lightweight application when it comes to
resource consumption so system performance won't suffer because of this. If you wish to keep
different personal settings for each instance, copy application to another folder. This way second
instance will use own .ini file, similarly as in Portable device usage .
See also
Database Shortcuts
64
63
49
47
82
49
Advanced using 81
© 2003 - 2013 Dataland Software
General options
Install to portable device
Backup
Compact and Repair
Attachment editor
47
82
63
64
42
Agenda At Once82
© 2003 - 2013 Dataland Software
4.5 Install to portable device
Agenda At Once keeps all personal settings in .INI files, which means that you can easily transfer
application and all becoming data to a different computer. This is particularly useful when you want to
keep Agenda At Once on USB pocket drive (USB pen drive, flash drive, USB stick, USB memory,
portable disk, etc) so you can plug it in any computer you come across and access your data as you
were working on your own computer.
To accomplish this, you can change destination path while installing application or you can manually
copy necessary files to USB drive. Point Windows Explorer to the installation path to find these files
(usually "C:\Program Files\Agenda At Once" or "C:\Programs\Agenda At Once"). Here's the list:
AgendaAtOnce.exe Mandatory Main application file
globalshortcuts.dll Optional Needed if you want to use Global Shortcuts
AgendaAtOnce.chm Optional Help file, copy if you need user manual
tips.txt Optional Only if you want to read "Tip of the Day"
INI files locations
Another requirement for portable applications is not to leave any trace on target computer. Agenda
At Once uses smart guessing where generated files should be placed (.INI file settings, default save
path, temporary path, etc). If it's installed to regular "\Program Files" (or "\Programs") folder, it uses
"Application Data" folder (because MS Vista doesn't allow writing to it). Otherwise, if it's installed (or
copied) to some other folder on disk or portable device, it uses application folder. For example, if
AgendaAtOnce.exe is placed in "F:\AAO" or "C:\MyFiles\AAO", it will use same path of .INI files.
Autorun
If you want to run Agenda At Once upon plugging USB disk, you can follow this simple procedure.
1. In the root of your portable drive create file named autorun.inf (if it doesn't exists already)
and double-click it to open a text editor.
2. Add this text to it to add AAO to Autoplay window (Code 1):
[AutoRun]icon=AAO\AgendaAtOnce.exe
54
Advanced using 83
© 2003 - 2013 Dataland Software
open=AAO\AgendaAtOnce.exe /maction=Open Agenda At Once
3. If you want AAO to appear in the context shell menu for a drive, add these lines (Code 2):
shell\aao=Agenda At Onceshell\aao\command=AAO\AgendaAtOnce.exeshell=aao
4. Save file.
Notes:
· Starting from Windows XP SP1, due to security reasons, program will not run automatically -
user will still need to choose an appropriate action in Autoplay window
· Replace path ("AAO\") to reflect your own folder
· Feel free to remove "icon" line if you don't want AAO icon to appear
· You can also remove "/m" from "open" option if you don't want to run it minimized
· Command "action" is mandatory for Win XP SP1 and newer (otherwise "open" command
would be ignored - see first note)
· You can use either (Code 1 or Code 2) or you can use both
· If you use Code 2 running AAO will became default action (double-click from My
Computer) instead of showing content of a drive
Agenda At Once84
© 2003 - 2013 Dataland Software
4.6 GTD - Getting Things Done
David Allen's Getting Things Done (GTD) methodology is simple and effective productivity system.
"Getting Things Done (commonly abbreviated as GTD) is an action management method
of The David Allen Company, registered trademarks of The David Allen Company, and the title
of the book which describes the method by David Allen.
GTD rests on the principle that a person needs to move tasks out of the mind by recording
them somewhere. That way, the mind is freed from the job of remembering everything that
needs to be done, and can concentrate on actually performing those tasks. What distinguishes
GTD from other time- or action-management systems is the idea of grouping tasks by the
context (defined as a place or set of available resources) in which they are to be performed."
Quote from the Wikipedia (http://en.wikipedia.org/wiki/Getting_Things_Done)
If you want to learn more about this great and popular system, please refer to official web site:
http://www.davidco.com/ and consider buying a book.
GTD and Agenda At Once
If you wish to use GTD system, our software can help you with that. Note that method described here
is nothing more than a sample, and you can adjust it according to your own needs.
1. Create category Next Action and optionally one category for each possible context (At work,
At home, Calls, etc). You can also create categories Someday/Maybe and Waiting for, but you
can also find more appropriate to use Status field for this purpose and create appropriate filters.
2. Create and save filters :
Inbox
[Categories] [is] [Empty] AND
[Status] [is] [Active]
Next Actions
[Categories] [contains] [Next Action]
41
44
Advanced using 85
© 2003 - 2013 Dataland Software
Context 1
[Categories] [contains] [Context 1]
(Add additional filters for each context)
3. If you are using Status field, you can also add these filters:
Waiting for
[Status] [is] [Deferred]
Someday/Maybe
[Status] [is] [Inactive]
4. Regarding projects, you can also use a Category field, but we think that it's slightly easier to use
to-do hierarchy features. You can even use hierarchy for contexts, instead of categories, if you find
it's more appropriate for you.
GTD describes five phases: collect, process, organize, review and do.
Collecting information with Agenda At Once is easy: just add a task and don't assign it to any
category. If you look at Inbox filter above, you can see that new tasks will be easily accessed. If you
are using Global Shortcuts it becomes even easier: press a keyboard shortcut, type few words and
hit Enter. Your current work remain almost uninterrupted.
To process new tasks, switch to Inbox tab (filter) and take one task at the time. If it takes less than
2 minutes (GTD guideline), do it immediately. Otherwise, change status, file it to a Project or assign
a category (Context). Once in a while (recommended at least once a week), browse through
Projects (root tasks), assign Next Action to appropriate subtasks. Switch to and browse through
Waiting for and Someday/Maybe list and organize each task.
See also
Filters
Categories
54
44
41
Agenda At Once86
© 2003 - 2013 Dataland Software
4.7 Security
It is possible to password protect database file by using Options window . If password is set, file is
encrypted with powerful algorithm so anyone who wants to open it must enter a correct password.
You need to separately protect all files with sensitive data, as unprotected files will still be
readable by anyone using Agenda At Once.
Caution: if you forget password, we will not be able decrypt file for you. For security reasons
password is not written into the database and cannot be retrieved.
In order to increase security we have implemented additional options. By default, user needs to enter
password only at startup (or file open), but what if you step away from the computer for a while? You
can choose an option to request a password each time when AAO is restored (At startup and
restore option). Additionally, if you left AAO visible on the screen, it can be automatically minimize
after period of inactivity. Although main purpose of this is to increase security, you can use it even if
you don't use other security options, if you wish.
See also
Security options
56
56
Advanced using 87
© 2003 - 2013 Dataland Software
4.8 Command line
Command line switches supported by Agenda At Once:
/m Start application minimized
/quit Close application if active
"[file name]" Open specified database file
Other information
Part
V
Agenda At Once90
© 2003 - 2013 Dataland Software
5 Other information
5.1 Credits
We would like to use this page to thank to developers who made their products and libraries available
(commercial or OpenSource).
Borland/CodeGear Delphi
Main development environment
http://www.borland.com/, http://www.codegear.com/
Absolute Database
Database System
http://www.componentace.com/
TMS Component Pack
Various components, including planners
http://www.tmssoftware.com/
SpTBXLib
Menus, toolbars and custom themes (skins)
http://club.telepolis.com/silverpointdev/sptbxlib/
Virtual TreeView
Tree list component
http://www.soft-gems.net/
TurboPower Abbrevia
Compression components
http://tpabbrevia.sourceforge.net/
JEDI components
Various components
http://www.delphi-jedi.org/
Icons
Other information 91
© 2003 - 2013 Dataland Software
http://www.icons-icons.com/, http://www.famfamfam.com/, http://www.dsbglobal.com/, ...
Agenda At Once92
© 2003 - 2013 Dataland Software
5.2 Support
WWW
Company page:
http://www.datalandsoftware.com/
Product page:
http://www.agendaatonce.com/
Tech. support:
General:
Physical address
Dataland Software
Milovana Glisica 7
21000 Novi Sad
Serbia
Phone/Fax: +381.21.553.893 (please consider that we are in CET time zone)
Index 93
© 2003 - 2013 Dataland Software
Index- A -activities 38
advanced reports 57
aggregation 50, 77
alarm 33, 36, 54
API 67
assignee 38
assignees 33
attachments 42
automatic backup 63
autominimize 86
autorun 82
- B -backup 63
basic 10
- C -calendar 15
categories 33, 41
colors 51
columns 12
combined view 48
command line 87
compact 64
completion 77
compression 42
concepts 10
confirmations 48
contact 92
contact properties 38
contacts 17, 38
contacts menu 26
contacts options 52
contacts print 60
contacts toolbar 31
credits 90
criteria 44
CSV 65, 66
- D -database shortcuts options 49
david allen 84
default font 53
deleted items 62
drag and drop 74
duration 33
- E -embedded attachment 42
encryption 56, 86
errors 64
export 66
- F -file locking 79
file menu 20
filters 44
find 45
flash drive 82
folder attachment 42
font 53
formatting 40
full text search 45
- G -general options 47
getting things done 84
global shortcuts 54
globalshortcuts.dll 54
grid lines 50
gtd 84
- H -hours scheduled 57
- I -import 65
inconsistency 64
Agenda At Once94
© 2003 - 2013 Dataland Software
INI files 82
inline editing 72
introduction 2, 10
- K -keyboard shortcuts 6
- L -layout 4, 48
linked attachments 42
locking 79
- M -mailing address 92
main screen 4
main toolbar 28
maintenance 64
minimizing 48
moving tasks 74
multiple files 79
multi-user 79
- N -network mode 79
notes 18, 40, 53
notes menu 24
notes print 61
notes toolbar 32
- O -one-on-one report 57
optimization 64
options 47, 48, 49, 50, 51, 52, 53, 54, 56
overview 2
- P -parent completion 77
password 56, 86
pen drive 82
physical address 92
planner 15
plugins 67
portable 82
print contacts 60
print notes 61
print schedule 59
print to-do 57
properties 33, 36
- Q -questions 92
quick notes 18, 53
quick notes menu 24
quick notes print 61
quick notes toolbar 32
- R -recurrency options 33
recycle bin 62
reminder 33, 36, 54
repair 64
rules 44
- S -schedule 15, 36
schedule menu 25
schedule options 51
schedule print 59
schedule toolbar 30
scheduled task edit 36
scheduled task properties 36
seach 45
security 56, 86
select assignees 33
select categories 33
settings files 82
shared data 79
shortcuts 6, 54
size 42
sound 54
status 33, 36
stick 82
support 92
Index 95
© 2003 - 2013 Dataland Software
- T -task edit 33
task properties 33
tasks 12
teamwork 79
text style 40
third-party products 90
to-do 12, 33
to-do completion report 57
to-do editing 72
to-do list 12
to-do menu 21
to-do options 50
to-do print 57
to-do toolbar 29
tools menu 27
- U -undelete 62
USB stick 82
user fields 38, 52
user interface options 48
- V -view menu 23
- W -wav 54
web site 92