BOLE
NZ
& SC
HÄ
FER
1.2.2 BSD KOLBENSPEICHERZUBEHÖR 01-2010 1.2.2 BSD PISTON ACCUMULATOR ACCESSORIES 01-2010
BSD KOLBENSPEICHERZUBEHÖR
BSD PISTON ACCUMULATOR ACCESSORIES
BOLE
NZ
& SC
HÄ
FER
2 1.2.2 BSD KOLBENSPEICHERZUBEHÖR 01-2010 1.2.2 BSD PISTON ACCUMULATOR ACCESSORIES 01-2010
INHALTSVERZEICHNIS
Seite
Übersicht Produktverwendung _____ 4/7
BSD Gasseitiges Zubehör
Allgemeine Informationen _____________ 8Standard Verrohrungssystem ___________ 9Entlüfterstutzen___________________ 10/11Gas Sicherheitsventile _________________12Berststopfen ________________________13Absperreinheiten__________________ 14/15Absperrkugelhahn ____________________15Sicherheits- und Absperreinheit________ 16Zubehör Absperrventile _______________17Füllventil __________________________ 18Füll- und Prüfeinrichtung _____________ 19Füll- und Prüfeinrichtung Zubehör ___ 19-21Flaschendruckminderer ______________ 21
BSD Ölseitiges Zubehör
Allgemeine Informationen ____________ 22Öl Absperrkugelhähne _____________ 23/24Öl Entlastungskugelhähne ____________ 24Zubehör Absperrventile ______________ 25Öl Sicherheits- und Absperrblock ____ 26-29BSD Übergangsstück ________________ 29Öl Sicherheits- und Entlastungsblock _ 30/31Öl Entlastungsventil _________________ 31Öl Sicherheitsventile ______________32/34
BSD Mess- und Anzeigesysteme
Allgemeine Informationen ____________ 36Doppelfrontplatte ___________________ 37Manometeranschluss Gasseite _________ 38Manometeranschluss Ölseite __________ 39Elektronischer 2-fach Druckschalter __ 40/41Mechanischer 2-fach Druckschalter _____ 42Elektronischer Druckaufnehmer _______ 43
page
Overview of product application ____ 4/7
BSD gas-side accessories
General information __________________ 8Standard piping system _______________ 9Bleed valves ______________________ 10/11Gas safety valves _____________________12Bursting discs _______________________13Shut-off units ____________________ 14/15Shut-off ball valve ____________________15Safety- and Shut-off Units ____________ 16Accessories shut-off valves _____________17Filling valve ________________________ 18Filling and testing device _____________ 19Filling and testing device accessories _ 19-21Bottle pressure reducer _______________ 21
BSD oil-side accessories
General information _________________ 22Oil shut-off ball valves _____________ 23/24Oil discharge ball valves ______________ 24Accessories shut-off valves ____________ 25Oil safety- and shut-off block ________ 26-29BSD adapter ________________________ 29Oil safety- and discharge block ______ 30/31Oil discharge valve __________________ 31Oil safety valves ___________________32/34
BSD meassuring and display devices
General information _________________ 36Double front panel __________________ 37Pressure gauge for gas-side ___________ 38Pressure gauge for oil-side ____________ 39Electronic dual pressure switch ______ 40/41Mechanic dual pressure switch ________ 42Electronic pressure transducer _________ 43
INDEX
BOLE
NZ
& SC
HÄ
FER
1.2.2 BSD KOLBENSPEICHERZUBEHÖR 01-2010 1.2.2 BSD PISTON ACCUMULATOR ACCESSORIES 01-2010 3
Seite
BSD Druckbehälter
Allgemeine Informationen ____________ 44Druckbehälter bis 75 l ________________ 45Groß-Druckbehälter bis 11.000 l ________ 46Grundausführung 220/350 bar _______ 47-50Sonder-Druckbehälter geschweißt _____ 51Spezial-Druckbehälter geschraubt ______ 52
BSD Montagetechnik
Ausführungsbeispiele ________________ 54Konsolen __________________________ 55Spannschellen ______________________ 56Rundstahlbügel _____________________ 57
page
BSD pressure vessel
General information _________________ 44Pressure vessel up to 75 ______________ 45Large- pressure vessel up to 11.000 l ____ 46Basic version 220/350 bar ___________ 47-50Special pressure vessel welded ________ 51Special pressure vessel screwed ________ 52
BSD mounting technology
Design examples ____________________54Brackets ____________________________55Steel clamps ________________________56U-bolt clamps _______________________57
4 1.2.2 BSD KOLBENSPEICHERZUBEHÖR 01-2010 1.2.2 BSD PISTON ACCUMULATOR ACCESSORIES 01-2010
Beschreibung
Anhand des Übersichtsschaltplanes kann eine ein-fache Orientierung über die vielfältigen Einsatzmög-lichkeiten der BSD Zubehör Komponenten ermög-licht werden. Alle Komponenten sind hinsichtlich ihrer Verwendung an entsprechender Stelle positio-niert. Sie gliedern sich, wie farblich gekennzeichnet, in fünf verschiedene Bereiche.
Seite / Page Seite / PageBSD Gasseitiges Zubehör
8 ... 21BSD Druckbehälter
44 ... 53BSD gas-side accessories BSD pressure vessel
BSD Ölseitiges Zubehör22 ... 35
BSD Montagetechnik54 ... 57
BSD oil-side accessories BSD mounting technology
BSD Mess- und Anzeigesysteme36 ... 43
BSD meassurement / display devices
ÜBERSICHT PRODUKTVERWENDUNG
PI
P T
X
1 2 3
SP1SP2
PI
NC
NOC
NC
NOC
X X X X X
1
2
3
4
5
6
2
1
2
3
12
3
1
4
7
1
2
1
Anschluss weiterer Kolbenspei-cheranlagen (Druckausgleich)connection for other accumulator units (pressure compensation)
2
Anschluss zum Auff üllen mit Stickstoff
connection for nitrogen fi lling
PDruckanschluss Hydraulik
pressure connection hydralic
TTankanschluss Hydraulik
tank connection hydraulic
3Öl Messanschluss
oil- test connection
8
1
2
4
BOLE
NZ
& SC
HÄ
FER
5
Description
This easy-to-read circuit diagram offers the reader a simple orientation concerning the wide application range of BSD accessory components. In the diagram, all components are appropriately positioned with regard to their application. They are divided into five different category groups that are color-coded.
OVERVIEW OF PRODUCT APPLICATION
1.2.2 BSD KOLBENSPEICHERZUBEHÖR 01-2010 1.2.2 BSD PISTON ACCUMULATOR ACCESSORIES 01-2010 5
PRODUKTÜBERSICHT
Pos. Bild Benennung Schaltzeichen Besonderheit / Funktion SeitePos. Picture Part name Graphical symbol Special feature / function Page
3
6
BSD Standard Verrohrungssystem mit Spezialverbindung, zum An-• schluss von SV und Messequipment
9BSD standard piping system with special connection, •
for SV and measuring devices
4
BSD
Ent
lüft
erst
utze
n fü
r Dru
ckbe
hälte
r
BSD
ble
ed v
alve
s fo
r pre
ssur
e ve
ssel
s
Standard Entlüfterstutzen(vertikale Installation)
Ablassen von Kondensat oder • übergetretenem Fluid
10
standard bleed valve (vertical installation)
4
Standard Entlüfterstutzen(horizontale Installation)
standard bleed valve (horizontal installation)
4
Minimess- Schraubkupp-lung (vertikale Installation) discharging condensate •
or pass over fl uidminimess screw coupling (vertical installation)
4
Kondensat-Sammelrohr mit zentralem Ablassventil
X
11condensate collecting pipe with central discharge valve
3
BSD
Gas
Sic
herh
eits
vent
ile
BSD
gas
saf
ety
valv
es max. PN 220, DN 6,
DGRL 97/23 EG (CE)
Gasseitige Überlastsicherung• 123 max. PN 350, DN 6
DGRL 97/23 EG (CE)
3 max. PN 350, DN 9,ASME (UV- Stamp)
gas-side overload protection•
3BSD Berst-Stopfen DN 4
13BSD bursting disc DN 4
1
BSD
Abs
perr
einh
eite
n
BSD
shu
t-off
uni
ts
Gewinde Anschluss (DN 32)
AK
DB
Absperrung vom Druckbehälter • zum Kolbenspeichermit Rückschlagfunktion zum Befül-• len der Druckbehälter
14 ...
thread connection (DN 32)
1
SAE Flansch Anschluss(DN 40, DN 50)
SAE fl ange connection(DN 40, DN 50)
separator between pressure vessel • and accumulatorwith non return function • for fi lling of pressure vessels
1
Flansch Anschluss(DN 65, DN 80, DN 100)
fl ange connection(DN 65, DN 80, DN 100)
2BSD Absperrkugelhahn Druckausgleichsfunktion zwischen •
zwei Kolbenspeicheranlagen15
BSD shut-off valve balance function between • two accumulator units
3
5
1
BSD Sicherheits- und Absperreinheit
AK
DB
M3M1
M2
7
mit Rückschlagfunktion, Gas SV, • Füllventil und Messanschlüssen
16BSD safety- and shut-off unit with non return function, gas SV, •
fi lling valve and measuring con.
5BSD Füllblock
G3/4
G1/2
G1/4 7
mit Füllventil und Messanschluss• 18
BSD fi lling block with fi lling valve and • measuring connection
PRODUCT OVERVIEW
1.2.2 BSD KOLBENSPEICHERZUBEHÖR 01-2010 1.2.2 BSD PISTON ACCUMULATOR ACCSESSORIES 01-2010 6
BOLE
NZ
& SC
HÄ
FER
Pos. Bild Benennung Schaltzeichen Besonderheit / Funktion Seite
Pos. Picture Part name Grahic symbol Special feature / function Page
7BSD Füll- und Prüfeinrichtung
N2
5
Kontrolle des N2-Druckes• Füllen von Speichersyst. mit N2•
19...BSD fi lling and testing device N2 pressure control •
fi lling of accum. systems with N2•
8BSD Flaschendruckminderer
7N2
Begrenzung auf den Betriebsdruck • des Speichersystems
21BSD bottle pressure reducer limiting pressure to working •
pressure of accumulator system
2
BSD
Öl K
ugel
hähn
e
BSD
oil
ball
valv
es
Gewinde Anschluss (DN 32)
Trennen des Kolbenspeichers • vom Hydrauliksystem
23 ...
thread connection (DN 32)
2
SAE Flansch Anschluss(DN 40, DN 50)SAE fl ange connection(DN 40, DN 50)
separates piston accumulator • from hydraulic system
2
Flansch Anschluss(DN 65, DN 80, DN 100)fl ange connection(DN 65, DN 80, DN 100)
1
BSD
Ent
last
ungs
kuge
lh.
BSD
rele
ase
ball
valv
es BSD Öl Block-Kugelhahn Speicher-Entleerungsventil für • Rohrleitungs-Installation
24BSD oil block ball valve accumulator discharge valve•
for pipe installation
1BSD Öl Platten Kugelhahn Speicher-Entleerungsventil•
für Block-Installation
BSD oil plate ball valve accumulator discharge valve • for block installation
1
2
3 4
BSD ÖL Sicherheits- und Absperrblock
S M1 M2
P T
Druck-Absicherung, Absperrung • und Entlastung (auch elektrisch)
26 ...BSD oil safety- and shut-off block pressure protection, shut-off and •
discharge (also electrical)
1 3
4
BSD Öl Sicherheits- und Entlastungsblock
MP
T
Druck-Absicherung und Entlastung • (mit 2-5 Druckbegrenzungsventilen)
30 ...BSD oil safety- and discharge block pressure protection and discharge•
(with 2-5 discharge valves)
4BSD Öl Entlastungsventil
R
PDruckentlastung für• Block-Installation
31BSD oil discharge valve pressure • discharge for
block installation
3BSD Öl Sicherheitsventil
P
T1T2 Ölseitige Druckabsicherung•
für Rohrleitungs-Installation32 ...
BSD oil safety valve oil-side pressure protection • for pipe installation
1 2
5
BSD Doppelfrontplatte für Öl und Gasseite 7
mit Füllblock und • Absperrventilen
37BSD double front panel oil and gas-side
with fi lling block and • shut-off valves
1
BSD Manometeranschluss Gasseite
G3/4
G1/2
7
mit Füllblock und Absperrventil• 38
BSD pressure gauge gas-side with fi lling block and • shut-off valve
2BSD Manometeranschluss Ölseite
(M20 x 1,5) mit Absperrventil, Winkelhalter, •
Hochdruckschlauch, Prüfanschluss39
BSD pressure gauge oil-side with shut-off valve, bracket, high • pressure hose, test connection
5
BSD Elektronischer 2-fach- Druckschalter
P
I mit zusätzlichem Analogausgang• 40 ...
BSD electronic dual pressure switch with additional analog output•
1.2.2 BSD KOLBENSPEICHERZUBEHÖR 01-2010 1.2.2 BSD PISTON ACCUMULATOR ACCSESSORIES 01-2010 7
BOLE
NZ
& SC
HÄ
FER
PRODUKTÜBERSICHT
Pos. Bild Benennung Schaltzeichen Besonderheit / Funktion Seite
Pos. Picture Part name Grahic symbol Special feature / function Page
4
BSD mechanischer 2-fach-Druckschalter Schaltpunkte einstellbar•
42BSD mechanic dualpressure switch set points adjustable•
3BSD Elektr. Druckaufnehmer
PI Messbereich einstellbar•
43BSD electr. pressure transducer working range adjustable•
1
BSD Standard Druckbehälter bis 75 l• 45
BSD standard pressure vessel up to 75 l•
BSD Groß-Druckbehälter bis 11.000 l• 46 ...
BSD large pressure vessel up to 10.000 l•
BSD Sonder-Druckbehälter geschweißt Auslegung nach Kundenwunsch•
51BSD special pressure vessel welded customized design •
BSD Sonder-Druckbehälter ge-schraubt
für spezielle Anwendungen• bis 900 l
52BSD special pressure vessel screwed
for special applications • up to 900 l
1
BSD Kolbenspeicher Konsolen
-
zur vertikalen Montage von • Kolbenspeichern
55BSD piston accumulator brackets for vertical installation of piston •
accumulators
BSD Druckbehälter Konsolen zur vertikalen Montage von • Druckbehältern
BSD pressure vessel brackets for vertical installation of pressu-• re vessels
2
BSD Spannschelle Fixierung des Druckbehälters bei • vertikaler Montage
56BSD steel clamps fi xation of pressure vessels•
by vertical installation BSD Rundstahlbügel mit Rohrunterlage
Fixierung des Kolbenspeichers • bei vertikaler Montage
57
BSD u-bolt clamps with plastic pipe saddle
fi xation of piston accumulator • by vertical installation
BSD Rundstahlbügel ohne Rohrunterlage
Fixierung des Kolbenspeichers • gemäß BSD Standard
BSD u-bolt clamps without plastic pipe saddle
fi xation of piston accumulator • according to BSD standard
Part Finder Part Finder
Der Part Finder (zu sehen am Seitenrand der jeweiligen Komponente) ermöglicht ein wiederfi nden der einzelnen Zubehöhr-Bauteile in der Verwendungsübersicht.
Bezeichnet die Komponente
im Schaltplan
describes component in the circuit diagram
The Part Finder, which you see on the side of the respective page, will help you to retrieve the individual accessory part in the overview of our product applications.
Bezeichnet die Broschüren Seite
indicates brochure page4
4
PRODUCT OVERVIEW
BOLE
NZ
& SC
HÄ
FER
8 1.2.2 BSD KOLBENSPEICHERZUBEHÖR 01-2010 1.2.2 BSD PISTON ACCUMULATOR ACCESSORIES 01-2010
BSD GASSEITIGES ZUBEHÖR
ALLGEMEINE INFORMATIONEN
Alle gasseitigen Komponenten sind umfangreich geprüfte Bauteile mit hoher Zuverlässigkeit. Sie sind leckagesicher, bieten vielseitige Einsatzmöglich-keiten und sind nahezu wartungsfrei.
Abnahme
Alle Bauteile sind entsprechend ihrer Verwendung mit Stickstoff nach DGRL 97/23/EG / ASME Sec. VIII Div. I ausgelegt. Sie verfügen somit über alle not-wendigen Prüfungen, Zertifikate und Bauteilkenn-zeichnungen, die für den ordnungsgemäßen Ein-satz erforderlich sind. Grundsätzlich unterliegen alle druckhaltenden Ausrüstungsteile einer Abnahme nach DGRL 97/23/EG. Bei Nennweiten < DN32 erfolgt gemäß DGRL 97/23/EG (Artikel 3, Absatz 3) keine CE Kennzeichnung. Bauteile, die der ASME-Abnahmeunterliegen, verfügen über keine Kennzeichnung, wenn die NW < 6 inch beträgt. Sicherheitseinrich-tungen, wie Sicherheitsventile, sind aufgrund ihrersicherheitsrelevanten Funktion immer mit der CE-Kennzeichnung bzw. bei ASME-Abnahme mit dem UV-Stamp versehen.
Standard Anschlüsse
Alle BSD Gas Komponenten basieren in ihren Anschlüssen auf den nachfolgenden Normen:
Gewindezapfen DIN 3853 / ISO 8434• Einschraubbohrungen DIN 3861 Bohrungsform W• SAE-Flansch-Anschlüsse SAE J518• Avit Flansch-Anschlüsse ISO 6164•
(andere Anschlüsse auf Anfrage)
Oberflächen
Die Oberflächen der einzelnen Bauteile sind vor-zugsweise galvanisch verzinkt und chromatiert. Abweichungen siehe Komponentenbeschreibung.
Übersicht Gasseitiges ZubehörSeite
Standard Verrohrungssystem ___________ 9Entlüfterstutzen __________________ 10/11Gas Sicherheitsventile ________________12Berststopfen ________________________13Absperreinheiten _________________ 14/15Absperrkugelhahn ___________________15Sicherheits- und Absperreinheit _______ 16Zubehör Absperrventile _______________17Füllventil __________________________ 18Füll- und Prüfeinrichtung _____________ 19Zubehör Füll- und Prüfeinrichtung ___ 19/21Flaschendruckminderer ______________ 21
All gas-side components are tested components that provide a high degree of reliability. They are leak-proof, provide multi-use and are practically maintenance-free.
Inspection
Due to their use together with nitrogen, all compo-nents are designed according to DGRL 97/23/EC / ASME Sec. VIII Div. I. directives. As such, they have passed all mandatory tests, have been certified, and carry the component tags that are required for their proper use. Basically, all pressure-bearing equipment is subject to an inspection acc. DGRL 97/23/EC. At nominal size < DN 32, according to DGRL 97/23/EC (Article 3, paragraph 3), no CE mark is required. Components that are subject to inspec-tion according to the ASME directive are not marked if the nominal value amounts to <6 inch. Safety-re-lated equipment, such as safety valves, always carry the CE mark or, in case of the ASME-inspection, the U-stamp.
Standard Connections
With regard to their connections, all BSD gas compo-nents comply with the following standard norms:
Threaded pins DIN 3853 / ISO 8434 • Screw-in borings DIN 3861 bore Form W • SAE flange ports J518 • Avit Flange connections ISO 6164 •
(Other connections can be added upon request)
Surfaces
The surfaces of the individual components are nor-mally galvanized and chromated. For possible varia-tions see description of components.
Overview of Gas-Side AccessoriesSeite
Standard piping system _______________ 9Bleed valves _____________________ 10/11Gas safety valves ____________________12Bursting discs _______________________13N2 shut-off units __________________ 14/15Shut-off ball valve ___________________15Safety- and shut-off unit _____________ 16Accessories shut-off valves _____________17Filling valve ________________________ 18Filling and testing device _____________ 19Accessories filling and testing device _ 19/21Bottle pressure reducer ______________ 21
BSD GAS-SIDE ACCESSORIES
GENERAL INFORMATION
BOLE
NZ
& SC
HÄ
FER
1.2.2 BSD KOLBENSPEICHERZUBEHÖR 01-2010 1.2.2 BSD PISTON ACCUMULATOR ACCESSORIES 01-2010 9
Beschreibung
Das BSD Standard Verrohrungssystem bietet ein hohes Maß an Flexibilität. Die Anzahl der Druckbehälter lässt sich dank dieses Systems beliebig erweitern. Neben der Standardver-bindung der Druckbehälter, ver-fügt die Spezialverbindung (Pos. 3) über zwei radiale Anschlüsse G1/4 (Messanschluss) und G1/2 (Gas Sicherheitsventil).
Technische Daten / Artikel-Nr. Technical data / Part-no.
Nennweite DN 26 nominal diameter
Betriebsüberdruck (PN) max. 350 bar working pressure (PN)
Betriebsmedium Stickstoff / nitrogen working medium
Verschraubungen DIN 3853 / ISO 8434 connections
Bohrungsform TYP W DIN 3861 bore shape
Pos. 1 L-Verschraubung einstellbar 4200019646 L-screw connection adjustable Pos. 1
Pos. 2.1 Reduzierverschraubung G3/4 4200019637 reducer screw connection G3/4 Pos. 2.1
Pos. 2.2 Reduzierverschraubung G1 4202009104 reducer screw connection G1 Pos. 2.2
Pos. 3 Spezialverbindung (SNV) 4200027082 special screw connection (SNV) Pos. 3
Pos. 4 Manometer NG 63 inkl. Minimess Schraubkupplung * 4204013685 gauge NG63 incl.
minimess screw coupling * Pos. 4
Pos. 5 Gas Sicherheitsventil Seite 12 / page 12 gas safety valve Pos. 5
Pos. 6 T-Verschraubung 4200019644 T-screw connection Pos. 6
Pos. 7 Standardverbindung 4204007861 standard pipe Pos. 7
Pos. 8 Winkelverschraubung 4200019647 elbow screw connection Pos. 8
Pos. 9 Verbindungsrohr 4204013819 connecting pipe Pos. 9* Gewünschten Manometer Anzeigebereich
bei Bestellung mit angeben* Please indicate the requested display range
of the manometer in your purchase order
6 754
G1/4
1
2
3
G1/2
Verbindung zum Kolbenspeichergehört nicht zum LieferumfangConnection to the piston accumulatoris not included in delivery
98
parallele Behälteranordnungparallel vessel positioning
8
BSD STANDARD
VERROHRUNGSSYSTEM
Description
The BSD standard piping system offers high flex-ibility and the possibility to freely increase the number of pressure vessels. In addition to the standard connection of the pressure vessels, the special connection (Pos. 3) has two radial connections, that is, G ¼ (measuring connection) and G ½ (gas safety valve).
BSD STANDARD
PIPING SYSTEM
64
3
BOLE
NZ
& SC
HÄ
FER
10 1.2.2 BSD KOLBENSPEICHERZUBEHÖR 01-2010 1.2.2 BSD PISTON ACCUMULATOR ACCESSORIES 01-2010
Beschreibung
Der Entlüfterstutzen (Abb. 1+2) besteht aus einem Ein-schraubteil G ¾ nach DIN 3852 und einem Entlüfterteil. Er wird an der Unterseite der N2-Druckbehälter ange-schraubtund dient dem Ablassen von Kondensat oder übergetretenem Fluid. Bei horizontaler Behälteranord-nung ist die Ausführung mit Kondensatrohr (Abb.2) zu verwenden. Ersatzweise lässt sich zum Ablassen des Kondensats eine Minimess-Schraubkupplung.(Abb. 3) verwenden. Ergonomisch und einfaches Handling ermöglicht die Ausführung Sammelrohr-leitung (Abb. 4). Der Ablass des Kondensats kannan gewünschter Stelle über ein Ablassventil von Hand geöff net werden.
Entlüfterstutzen (Einbau vertikal)Bleed valve (vertically installed)
Entlüfterstutzen (Einbau horizontal)Bleed valve (horizontally installed)
Minimess Schraubkupplung (Einbau vertikal)
Minimess screw coupling (vertically installed)
SW 32SW 36
L2
ca. 11016
Ø10
L1 G 3/4
Ø 32
SW 14
Die Maße L1+L2 sind dem entsprechenden Druckbehälter angepasst.The dimensions L1+L2 are adjusted to the corresponding pressure vessel.
Technische Daten / Artikel-Nr. Technical data / Part-no.
Abbildung 1 2 3 fi gure
Nennweite DN 3 DN 3 DN 2 nominal diameter
Betriebsüberdruck (PN) max. 400bar working pressure (PN)
Betriebsmedium Stickstoff / nitrogen working medium
Gewicht ca. 0,4 kg ca. 0,5 kg ca. 0,18 kg weight
Abnahmevorschrift DGRL 97/23/EG (Artikel 3, Absatz 3)
PED 97/23/EC (articel 3, paragraph 3) acceptance regulation
Artikel.-Nr. 4204005105 4204003857* 4204011815 part-no.
* Druckbehälter Typ bei Bestellung mit angeben * Please specify pressure vessel type in your purchase order
Abb. 3fig. 3Abb. 3fig. 3
16ca
. 89
31,9G 3/4
SW 32
SW 36
SW 14
Verschlusskappeclosing cap
G 3/4
SW 32
G 1/4
SW 19
62
26
31,9
Verschlusskappe (M16 x 1,5)closing cap (M16 x 1,5)
/
BSD ENTLÜFTERSTUTZEN
Description
The bleed valve consists of a screw-in part G ¾ according to DIN 3852 (part 1 / part 2) and a vent part that is screwed onto the bottom of the N2-pressure vessel and serves to discharge condensate or excess liquid. At horizontal vessel orientation, the version that includes the condensate pipe has to be used. A Minimess screw coupling can be used as a replace-
ment for discharging the condensate (fig.3). The interceptive pipeline version allows an ergonomic and easy handling (fig.4). A manual discharging of condensate at the desired posi-tion is possible by use of a discharge valve.
BSD BLEED VALVES
44
BOLE
NZ
& SC
HÄ
FER
1.2.2 BSD KOLBENSPEICHERZUBEHÖR 01-2010 1.2.2 BSD PISTON ACCUMULATOR ACCESSORIES 01-2010 11
BSD Sammelrohrleitung
mit zentralem Ablassventil
Abb. 4
Technische Daten / Artikel-Nr. Technical data / Part-no.
Nennweite DN 3 nominal diameter
Betriebsüberdruck (PN) max. 400bar working pressure (PN)
Betriebsmedium Stickstoff / nitrogen working medium
Gewindeanschluss Absperrventil G1/4 thread connection shut- off valve
Pos. 1 L-Verschr. mit Absperrventil 4204012860 L-fi tting with shut- off valve Pos. 1
Pos. 2 Rohrbogen 4204003638 bended pipe Pos. 2
Pos. 3 L-Verschraubung 4204012861 L-fi tting Pos. 3
Pos. 4 L-Verschraubung mit Verschlussstpofen 4204012863 L-fi tting with plug Pos. 4
* festgelegte Länge bei BSD Standard Anlagen * fixed length for BSD standard units
NOTIZEN NOTES
BSD collecting pipeline
with central discharge valve
Fig. 4
R 60
281* 281*Ø27
G 3/4
250G 1/4
81
153
100 R 20
1 23
4
BOLE
NZ
& SC
HÄ
FER
12 1.2.2 BSD KOLBENSPEICHERZUBEHÖR 01-2010 1.2.2 BSD PISTON ACCUMULATOR ACCESSORIES 01-2010
BSD GAS SICHERHEITSVENTILE
Beschreibung
Das Gas Sicherheitsventil ist ein unmittelbar wir-kendes federbelastetes Druckventil für Drücke bis 220 / 350 bar. Bei überschreiten des Einstelldruckes öffnet das Ventil und schließt wieder nach einem Druckabfall von max. 10% des Einstelldruckes. Bei anderen Öffnungsdrücken, bitte den gewünschten Einstelldruck mit angeben.
HinweisDer Einstelldruck des Sicherheitsventils ist so zu wählen, dass ein Ansprechen im Betrieb ver-mieden wird. Dieser sollte min. 10% unter dem Einstelldruck bleiben. Wenn möglich sollte das Gas Sicherheitsventil auf den Berechnungsdruck des BSD Kolbenspeichers eingestellt werden. Gas Sicherheitsventile können nach dem Ansprechen undicht werden.
Gas Sicherheitsventil max. 220 bar, DGRL
Abb.1
Gas Sicherheitsventil max. 350 bar, DGRL
Abb. 2
Gas Sicherheitsventil max. 350 bar, ASME
Abb. 3
Technische Daten / Artikel-Nr.: Technical data / Part-no.
Abbildung 1 2 3 fi gure
Betriebsüberdruck (PN) max. 220 bar * max. 350 bar * max. 350 bar * working pressure (PN)
Nennweite DN 6 DN 9 nominal diameter
Betriebsmedium Stickstoff / nitrogen working medium
Abnahmevorschrift CE-Kennzeichnung gemäß DGRL 97/23/EG
CE-marking acc. to PED 97/23/EC
UV-Stamp ASME (Sec. VIII Div. I) acceptance regulation
Gewicht ca. 0,8 kg ca. 1,5 kg ca. 2,6 kg weight
Artikel.-Nr. 4204009303 4204007760 4204013155 part-no.
* gewünschten Einstelldruck bitte angeben * please indicate the pressure setting in your purchase order
Gas safety valve max. 220 bar, DGRL
Fig. 1,
Gas safety valve max. 350 bar, DGRL
Fig. 2
Gas safety valve max. 350 bar, ASME
Fig. 3
Ø30
14 115Ø
40SW 32
Weichdichtungresilient jointing 2
G 1/
2
17314
Ø30
5
G 1/
2
Ø41
SW 36
Weichdichtung / resilient jointing75
52,5G1
Ø28
G1/
2
Ø75
SW36
282
Auslass / exhaust
Weichdichtung resilient jointing
/
BSD GAS SAFETY VALVES
Description
The gas safety valve is an instantly acting spring-loaded valve for pressures up to 220 / 350 bar. If the pressure setting is exceeded, the valve opens and closes again after a drop in pressure of max. 10% of the required set pressure. In case of different opening pressures, please indicate the required set pressure in your purchase order.
NoteThe pressure setting of the safety valve is to be
chosen in such a way that its activation under normal working pressure is avoided. The nor-mal working pressure should remain at least 10 % below the pressure setting. If possible, the gas safety valve should be adjusted to the
calculated pressure of the BSD piston accumulator. Gas safety valves can leak after trip.
43
BOLE
NZ
& SC
HÄ
FER
1.2.2 BSD KOLBENSPEICHERZUBEHÖR 01-2010 1.2.2 BSD PISTON ACCUMULATOR ACCESSORIES 01-2010 13
Beschreibung
Der Berststopfen schützt Druckgeräte vor gassei-tiger Drucküberschreitung. Bei Überschreitung des Berstdruckes erfolgt eine dauerhafte Zerstö-rung der Berstmembrane, die dann ein Ablassen des Stickstoffes ermöglicht. Es ist zu beachten, dass der Betriebsdruck max. 90% des Berstdruckes betragen darf.
Technische Daten / Artikel-Nr. Technical data / Part-no.
Nennweite DN 4 nominal diameter
Betriebsmedium Stickstoff / nitrogen working medium
Gewicht ca. 0,03 kg weight
Material Edelstahl 1.4571 / stainless steel 1.4571 material
Berstdruck 200 bar 220 bar 280 bar 350 bar 375 bar 600 bar 800 bar burst pressure
Abnahme DGRL 97/23/EG mit CE-Kenn-zeichnung
4202012785 4202012786 4204013194 4204013195 4202012791 4204013196 4204013197acceptance PED 97/23/EC with CE-marking
Berstdruck 3200 psi 5100 psi 5500 psi 9000 psi burst pressure
ASME konform 4204004394 4204013198 4204013199 4204013200 ASME compliant
NOTIZEN
G 1
/4
SW19
2313
Ø4
Ø18,
9
Abblasebohrung / discharging hole
1
NOTES
BSD BERSTSTOPFEN
Description
The bursting disc serves to protect pressure equip-ment from excessive gas-side pressure. If the burst
pressure is exceeded the bursting membrane will be damaged permanently. The damaged membrane will discharge nitrogen. Please note that the working pressure must not exceed 90% of the burst pressure.
Abblaseleistung in kg/h relief capacity in kg/h
200 220280
350375
600
8001100
1210
1540
1925
2062
3300
4400
Bet
rieb
sdru
ck in
bar
w
orki
ng p
ress
ure
in b
ar
BSD BURSTING DISCS
BOLE
NZ
& SC
HÄ
FER
14 1.2.2 BSD KOLBENSPEICHERZUBEHÖR 01-2010 1.2.2 BSD PISTON ACCUMULATOR ACCESSORIES 01-2010
BSD N2 ABSPERREINHEIT
Funktion
N2-Absperreinheiten dienen der Absperrung zwischen BSD Kolbenspeicher und nachge-schalteten Gasbehältern. Im Gegensatz zu normalen Absperrkugelhähnen haben BSD Absperreinheiten eine zusätzliche Rück-schlagventilfunktion, die ein Befüllen des Druckbehälters durch den Kolbenspeicher ermöglicht.
DN 32 mit Innengewinde G1 1/2
Abb. 1
DN 40/50 mit SAE Flanschanschluss
Abb. 2
DN 65/80/100 mit Avit Flanschanschluss
Abb. 3
DN 32 with female thread connection G1 1/2
fig. 1
DN 40/50 with SAE flange connection
fig. 2
DN 65/80/100 with avit flange connection
fig. 3
C
D E
B
F
TKØ
HG
2
1
A
J
±0,5135.5
G1 1
/2
Ø 32
227
SW 65
83.5
144
Ø 89
1
2
BH
DC
F
SW 70A
Ø E
GDN 40 (mm) DN 50 (mm)A 164 E 38 A 203 E 48B 211 F 79,3 B 211 F 96,8C 281 G 36,5 C 316 G 44,4D 85 H 25 D 100 H 28Pos. 1 O-Ring NBR Ø47,22 x 3,53 Pos. 1 O-Ring NBR Ø56,75 x 3,53Pos. 2 8 x M16 x 55 (DIN 912) Pos. 2 8 x M20 x 65 (DIN 912)
DN 65 (mm) DN 80 (mm) DN 100 (mm)A 270 J 50 A 280 J 60 A 330 J 60B 570 F 30 B 700 F 45 B 700 F 40C 630 G Ø 248 C 750 G Ø 268 C 754 G Ø 328D 122 H Ø 190 D 142 H Ø 240 D 186 H Ø 245E 254 TKØ 145 E 304 TKØ 175 E 284 TKØ 200
Pos. 1O-Ring NBR
Pos. 1O-Ring NBR
Pos. 1O-Ring NBR
Ø75,56 x 5,33 Ø92,50 x 5,33 Ø115,00 x 7,00
Pos. 216 x M24 x 80
Pos. 28 x M30 x 105
Pos. 216 x M24 x 100
(DIN 912) (DIN 912) (DIN 912)
N2-DruckbehälterN2-pressure vessel
KolbenspeicherPiston accumulator
Function
N2-Shut-off units serve as a shut-off device between the BSD piston accumulators and the downstream gas bottles. In contrast to normal shut-off ball-valves, BSD shut-off units have an additional non-return function that allows a filling of the pressure vessel through the piston accumulator.
BSD N2 SHUT-OFF UNIT
41
BOLE
NZ
& SC
HÄ
FER
1.2.2 BSD KOLBENSPEICHERZUBEHÖR 01-2010 1.2.2 BSD PISTON ACCUMULATOR ACCESSORIES 01-2010 15
Technische Daten für Abb. 1, 2, 3, Technical data fig. 1, 2, 3,
Abbildung 1 2 3 fi gure
Nennweite DN 32 DN 40 DN 50 DN 65 DN 85 DN 100 nominal diameter
Betriebsüberdruck max. 350 bar working pressure
Betriebsmedium Stickstoff / nitrogen working medium
Anschlussgewinde 2 x G1 1/2
SAE 1 1/2“ – 6000psi
SAE 2“ – 6000psi Avit FA 65-5 Avit FA 80-4 Avit FA
100-4 thread connection
Gewicht (ca.) 4,5 kg 12,5 kg 14,5 kg 121 kg 189 kg 234 kg weight (ca.)
Abnahmevorschrift * mit CE-Kennzeichnunggemäß DGRL 97/23/EG
with CE-marking according to PED 97/23/EC
acceptance regulation
* DGRL 97/23/EG (Artikel 3, Absatz 3) / * PED 97/23/EC (articel 3, paragraph 3)
Artikel-Nr. für Abb. 1 Part-no. fig. 1
Absperreinheit komplett 4202005984 shut-off unit complete
Artikel-Nr. für Abb. 2 Part-no. fig. 2
Nennweite DN 40 DN 50 nominal diameterPos. 1 O-Ring NBR 4200001950 4200001954 o-ring NBR Pos. 1Komplett mit Schrauben (Pos. 2) u. O-Ring 4204011788 4204004837 complete with screws (Pos. 2) and o-ring
Artikel-Nr. für Abb. 3 Part-no. fig. 3
Nennweite DN 65 DN 80 DN 100 nominal diameterPos. 1 O-Ring NBR 4200001979 4204008785 4204009599 o-ring NBR Pos. 1Komplett mit Schrauben (Pos. 2) u. O-Ring 4204012917 4204012918 4204012919 complete with screws (Pos. 2) and o-ring
BSD N2 ABSPERRKUGELHAHN
Funktion
Der BSD N2-Absperrkugelhahn DN13 verfügt über keine Rückschlagventilfunktion. Er dient dem Druckaus-gleich von zwei oder mehr parallel geschalteten Kolbenspeicheranlagen. .
Technische Daten / Artikel-Nr.: Technical data / Part-no.
Nennweite DN 13 nominal diameter
Betriebsüberdruck (PN) max. 350 bar working pressure (PN)
Betriebsmedium Stickstoff / nitrogen working medium
Abnahmevorschrift DGRL 97/23/EG (Artikel 3, Absatz 3)
PED 97/23/EC (articel 3, paragraph 3) acceptance regulation
Gewicht ca. 0,7 kg weight
Artikel-Nr. 4204000594 part-No.
/
/
BSD N2 SHUT-OFF BALL VALVE
Function
The BSD N2-shut-off ball valve DN13 has no non-return valve function. It is used for the pressure balance between two or more parallel-connected accumu-lator units.
1119,5 35
40
17,5
M24 x 1,5
107
39
Rohrverschraubungpipe screwing
DIN 2353 S
SW 30
48
42
BOLE
NZ
& SC
HÄ
FER
16 1.2.2 BSD KOLBENSPEICHERZUBEHÖR 01-2010 1.2.2 BSD PISTON ACCUMULATOR ACCESSORIES 01-2010
BSD N2 SICHERHEITS- UND
ABSPERREINHEIT
Funktion
Die BSD N2 Sicherheits- und Absperreinheit DN 32verfügt zusätzlich zu den Standard BSD Absperrein-heiten über ein BSD Gas Sicherheitsventil, ein BSD Füllventil sowie drei Messanschlüsse.
Technische Daten / Artikel-Nr.: Technical data / Part-no.
Betriebsüberdruck (PN) max. 220 bar max. 350 bar working pressure (PN)
Nennweite DN 32 DN 32 nominal diameter
Betriebsmedium Stickstoff / nitrogen working medium
(L)änge 170 mm 227 mm (L)ength
Abnahmevorschrift PED 97/23/EC (Artikel 3, Absatz 3)
PED 97/23/EC (articel 3, paragraph 3) acceptance regulation
Gewicht 14,1 kg 14,7 kg weight
Pos. 1 N2 Absperreinheit 4202012110 N2-shut-off unit Pos. 1
Pos. 2 Verschlussschraube G1/4(1) 4200040336 screw plug G1/4 (1) Pos. 2
Pos. 3 BSD Füll- u. Prüfanschl.(2) 4200001330 BSD fi lling a. testing conn. (2) Pos. 3
Pos. 4 Usit Ring 4200004063 usit ring Pos. 4
Pos. 5 Gas Sicherheitsventil(3) 4204009303 4204007760 gas safety valve (3) Pos. 5
Pos. 6 Verschlussschraube G1/2(1) 4200040337 screw plug G1/2 (1) Pos. 6
Sicherheits- und Absperreinheit komplett 4202018062 4204000883 N2-Safety-and shut-off unit
(1) mit Druckentlastung(2) passende Füll- u. Prüfeinrichtung siehe Seite 19(3) gewünschter Einstelldruck bei Bestellung angeben
(1) with pressure release(2) for a compatible filling- and testing kit see page 19(3) please indicate the required pressure setting
in your purchase order
Pos. 3
Pos. 5
Messanschluss 2 (G1/4)measuring connection 2 (G1/4)
Messanschluss 3 (G1/2)measuring connection 3 (G1/2)
N2- Druckbehälter (G1 1/2)
N2- pressure vessel (G1 1/2)
Kolbenspeicher (G1 1/2)piston accumulator (G1 1/2)
Messanschluss 1 (G1/4)measuring connection 1 (G1/4)
/
Function
In addition to the standard BSD shut of units, the BSD N2-safety- and shut-off unit DN 32 features a BSD gas safety valve, a BSD filling valve and three measuring connections.
BB
G1
1/2
G1 1/
2
119
119
7187
L59
105
Ø11
8
190
32
1
4
G1/4
G1/2
G3/4
28
G1/2
6
32
G1/42
66
140
BSD N2-SAFETY- AND
SHUT-OFF UNIT
34
15
BOLE
NZ
& SC
HÄ
FER
1.2.2 BSD KOLBENSPEICHERZUBEHÖR 01-2010 1.2.2 BSD PISTON ACCUMULATOR ACCESSORIES 01-2010 17
BSD ZUBEHÖR ABSPERRVENTILE
BSD Druckausgleichseinrichtung *
Funktion
N2 Absperreinheiten, sowie Öl Kugelhähne mit Nenn-weiten ≥ DN 40 sind zur Druckentlastung optional mit Bypassleitung erhältlich. Sie erleichtern das Betätigen des Hauptabsperrhahns und verhindern Beschädigungen an Dichtungen durch zu schnellen Druckausgleich.
BSD Abschließvorrichtung *
Funktion
Mit der BSD Abschließvorrichtung kann die Betätigung von N2-Absperreinheiten sowie von BSD ÖL Kugelhähnen mittels eines Vorhängeschlosses vor unbefugtem oder versehent-lichem Betätigen schützen. Abb. 1 off en und geschlossen abschließbar, Abb. 2 geschlossen abschließbar.Abb. 1 / fi g. 1
BSD Positionsschalter *
Funktion
Mit den BSD Positionschaltern hat man die Möglichkeit die Schaltstellungen von N2-Absperreinheiten sowie von BSD ÖL Kugelhähnen zu überwachen. Bei Abb. 4 offen und geschlossen möglich, Abb. 3 nur geschlossen.Abb. 3 / fi g. 3
* Alle Systeme sind optional erhältlich, bitte bei Bestellung mit angeben
DN 40/500/50
BSD pressure compensation device *
Function
N2 shut-off units and oil valves with sizes ≥ DN 40 are optionally available with a pressure discharge bypass line. They facilitate the movement of the main gate valve and prevent damages to seals that are due to rapid pressure equalization.
BSD locking equipment *
Function
The BSD shut-off device prevents an unauthorized or accidental operation of N2-shut-off valves and BSD oil ball valves by using a padlock. Fig. 1 locked in open or closed position, fig. 2 locked in closed position.Abb. 2 / fig. 2
BSD position switch *
Function
The BSD position switches offer the possibility to control the switching positions of N2-shut-off valves and BSD oil ball valves. (Fig. 4 open and closed position possible, fig. 3 only closed position possible).Abb. 4 / fig. 4
* All systems are optionally available. Please indicate the reque-sted system in your purchase order
DN 65/80/100
BSD ACCESSORIES SHUT-OFF VALVES
BOLE
NZ
& SC
HÄ
FER
18 1.2.2 BSD KOLBENSPEICHERZUBEHÖR 01-2010 1.2.2 BSD PISTON ACCUMULATOR ACCESSORIES 01-2010
Beschreibung
Das BSD Füllventil G 3/4 (Abb. 1), eingebaut auf der Innenseite des gasseitigen Einfüllstutzen bei BSD Kolbenspeichern oder im BSD Zwischenstück (Abb. 2) für Speicheranlagen, dient dem Befüllen mit der BSD Füll- und Prüfeinrichtung von BSD-Kolbenspei-chern mit N2.
Kolbenspeicher Direkteinbau
absolut gasdicht durch • zusätzliche Verschluss-schraube Pos. 4
Abb. 1 / fi g. 1
Rohrleitungseinbau
mit zusätzlichen Anschlussmöglichkeiten• ergonomisch optimale Platzierung möglich•
Abb. 2 / fi g. 2
Technische Daten / Artikel-Nr. Technical data / Part-no.
Abbildung 1 2 fi gure
Nennweite DN 9 nominal diameter
Betriebsdruck (PN) max. 800 bar max. 400 bar working pressure (PN)
Betriebsmedium Stickstoff / nitrogen working medium
Gewicht ca. 0,2 kg ca. 3,2 kg weight
Abnahmevorschrift
DGRL 97/23/EG (Artikel 3, Absatz 3)PED 97/23/EC (articel 3, paragraph 3)
CE-Kennzeichnung gemäß DGRL 97/23/EGCE-marking according to PED 97/23/EC
acceptance regulation
Pos. 1 Gas Füllventil (Abb. 1) (1) 4200003239 gas fi lling valve (fi g. 1) (1) Pos. 1
Zwischenstück komplett (Abb. 2) (1) 4200003520 adapter complete (fi g. 2) (1)
Pos. 2 Einschraubteil mit RV 4200001330 screw-in part with RV Pos. 2
Pos. 3 Verschlussschraube G3/4 (2) 4200004502 screw plug G3/4 (2) Pos. 3
Pos. 4 Usit-Ring Ø 28,7/37 mm 4200003216 usit-ring Ø 28,7/37 mm Pos. 4
Pos. 5 Usit-Ring Ø 42,7/53 mm 4200004063 usit-ring Ø 42,7/53 mm Pos. 5
Pos. 6 Usit-Ring Ø 26/32 mm 4200001225 usit-ring Ø 26/32 mm Pos. 6
Pos. 7 Verschlussschraube G1/4 (2) 4200040336 screw plug G1/4 (2) Pos. 7
Pos. 8 Verschlussschraube G1/2 (2) 4200040337 screw plug G1/2 (2) Pos. 8
Pos. 9 Anschlussblock 4204010844 connecting block Pos. 9(1) passende Füll- u. Prüfeinrichtung siehe Seite 19(2) mit Druckentlastung
(1) for a suitable filling and testing device see page 19(2) with pressure release
2
3
1
4
MA=220Nm
Füll- Anschluss filling- connection
G3/4
G1/2
G1/4
BSD FÜLLVENTIL BSD FILLING VALVE
Description
The BSD filling valve G3/4 (fig. 1), which is installed at the inside of the gas-sided end cap of BSD piston accumulators or in the BSD adapter (fig.2) for accu-mulator units, serves to fill the BSD piston accumu-lators with nitrogen by using the BSD filling and testing device.
Piston accumulator direct
installation
hermetically gas tight by • additional plug pos. 4
Abb. 1 / fi g. 1
Pipe installation
with additional screw connections• optimal ergonomic positioning possible•
Abb. 2 / fi g. 2. 44
154
SW 30
Ø30G3/4
Ø22
G 3/
4
46Ø50
12180
Ø9
3020
702 x M8
3
5
6
28 7
Ø65
A
A
41
1
4
1
45
BOLE
NZ
& SC
HÄ
FER
1.2.2 BSD KOLBENSPEICHERZUBEHÖR 01-2010 1.2.2 BSD PISTON ACCUMULATOR ACCESSORIES 01-2010 19
BeschreibungDie BSD Füll- und Prüfeinrichtung dient der Kontrolle des Stickstoff druckes sowie dem Befüllen von BSD Kolbenspei-chern mit Stickstoff . Im Standard Lieferumfang ent-halten ist der Füllschlauch FS, der Adapter A1 sowie FA1. Für andere Länderspezifi sche Stickstoff fl aschen-anschlüsse, siehe Adapter FA2...FA8. Andere Speicher-fabrikate, mit unterschiedlichen Füllanschlüssen, siehe Adapter A2 ... A4. Der Standard Lieferumfang wird geschützt in einem Transportkoff er ausgeliefert.
Standard Lieferumfang bestehend aus Standard delivery consists of
1 BSD Füll- u. Prüfeinrichtung 1 BSD fi lling and testing device1.1 Füllschlauchanschluss (mit Rückschlagventil) 1.1 fi lling hose connection (with non return valve)1.2 Speicheranschluss 1.2 accumulator connection1.3 Manometer (0 ... 250/400 bar) 1.3 manometer (0 ... 250/400 bar)1.4 Druckentlastungsventil 1.4 pressure discharge valve1.5 Spindel zum Öff nen des Füllventils 1.5 spindle to open the fi lling valve2 Füllschlauch DN 8 (Länge 1500 mm) 2 fi lling hose DN 8 (length 1500 mm)2.1 Stickstoff fl aschenanschluss (DIN 477, Teil 1, 200 bar) 2.1 nitrogen bottle connection (DIN 477, part 1, 200 bar)3 Adapter auf BSD Füllventil 3 adapter to BSD fi lling valve- Maulschlüssel SW 24/36 - fork spanner WS 24/364 Transportkoff er (Abm. 380 x 270 x 100 mm) 4 transport case (dim. 380 x 270 x 100 mm)
Technische Daten / Artikel-Nr.: Technical data / Part-no.:
Nennweite 6 nominal diameterBetriebsüberdruck (PN) max. 250 bar / 400 bar working pressure (PN)Betriebsmedium Stickstoff / nitrogen working mediumGewicht (inkl. Koff er) ca. 4,5 kg weight (incl. case)Abnahmevorschrift DGRL 97/23/EG (Artikel 3, Absatz 3) PED 97/23/EC (articel 3, paragraph 3) acceptance regulation
Artikel.-Nr. 0...250 bar: 4204013914 part-no. 0...250 bar
Artikel.-Nr. 0...400 bar: 4204013399 part-no. 0...400 bar
ca. 1
02
Ø40
M28
x 1
,5
SW6
ca. 150
ca. 1
52
M20 x 1,5DIN 2353
1
1.51.31.1
1.41.2 1.4
1.1
1.3 1.2
/
BSD FÜLL- UND PRÜFEINRICHTUNG
4
BSD FILLING AND TESTING DEVICE
DescriptionThe BSD fi lling and testing device serves to control the nit-rogen pressure and the fi lling of BSD piston accumulators
with nitrogen. The standard scope of delivery includes the fi ller hose FS and the adapter A1, FA1. For the connection of other, country-specifi c nit-rogen bottles see adapters FA2 ... FA8. Other accu-mulator products with diff erent fi lling connections see adapters A2 ... A4. For delivery purposes the standard components are protected in a transport case.
Füllschlauch DN 8 (Anshlüsse DIN 2353)fi lling hose DN 8 (connections DIN 2353)
Gasfl aschenadapter (DIN 477, Teil 1, 200 bar)gas bottle conn. (DIN 477, part 1, 200 bar)
SW24
Länge/length: 1500mm
2
M20
x 1
,5
SW24 SW22
M20
x 1
,5
W24
.32
x 1/
14
SW322.1M20 x 1,5 DIN 2353
SW24 ca. 65
Art.-Nr.: / Part-no.: 4204014684 Art.-Nr.: / Part-no.: 4200010982
FS FA 1
Adapter (auf BSD Füllventil, Seite18)adapter (to BSD filling valve, page 18)
SW 36
Ø5
G 3/
4
55
1816
M28
x 1
,5
3
Art.-Nr.: / Part-no.: 4204013440
A 1
47
BOLE
NZ
& SC
HÄ
FER
20 1.2.2 BSD KOLBENSPEICHERZUBEHÖR 01-2010 1.2.2 BSD PISTON ACCUMULATOR ACCESSORIES 01-2010
Alternative Füllventiladapter *
Adapter 7/8-14 UNF Adapter 5/8- 14 UNF Adapter Minimess
SW 36
7/8-14 UNF
50
16
M28 x 1,5
SW 36
5/8-14 UNF
50
16
M28 x 1,5
M16 x 1,5
16
M28 x 1,5
16,5
76 SW 19
SW 22
Art.-Nr.: / Part-no.: Art.-Nr.: / Part-no.: Art.-Nr.: / Part-no.: kein Adapter erforderlichno adapter required4204013683 4204013684 4204013792
7/8-14 UNF 5/8-14 UNF M16 x 1,5 M28 x 1,5
Füllventil Blasenspeicherfi lling valve bladder accum.
Füllventil Blasenspeicherfi lling valve bladder accu.
Füllventil Minimessfilling valve minimess
Füllventil Membranspeicherfi lling valve membrane accu.
Länderspezifischer Gasflaschenadapter *
300 bar (DIN 477, Teil 5)300 bar (DIN 477, part 5)
Frankreich / FranceRussland / Russia England England
ca. 1
02
W30 x 2
SW19
SW24
gerändeltstraight knurled
M20 x 1,5 DIN 2353
ca. 7
6
W21,8 x 1/14
SW30
SW24
M20 x 1,5 DIN 2353
ca. 7
3
W22.8 x 1/14
SW24
M20 x 1,5 DIN 2353
SW30
Art.-Nr. / Part-no. Art.-Nr. / Part-no. Art.-Nr.: / Part-no.4204005118 4200001499 4200001498
USA / USA Italien / Italy China 1 / China 1 China 2 / China 2
ca. 7
1
W24,3 x 1/14
M20 x 1,5 DIN 2353
SW24SW30
ca. 7
1
W21.7 x 1/14
SW30
SW24
M20 x 1,5 DIN 2353
ca. 7
6
M22 x 1,5
SW24
M20 x 1,5 DIN 2353
SW30
ca. 6
1
G5/8 ISO 228
SW24
M20 x 1,5 DIN 2353
SW30
Art.-Nr. / Part-no. Art.-Nr. / Part-no. Art.-Nr.: / Part-no. Art.-Nr.: / Part-no.4200001501 4200001500 4200021579 4204013628
* andere Adapter auf Anfrage * other adapters are available upon request
A 2 A 3 A 4
FA 2 FA 3 FA 4
FA 5 FA 6 FA 7 FA 8
BSD FÜLL- UND PRÜFEINRICHTUNG ZUBEHÖR BSD FILLING AND TESTING DEVICE ACCESSORIES
Alternative filling valve adapters *
Country-specific gas bottle connection *
BOLE
NZ
& SC
HÄ
FER
1.2.2 BSD KOLBENSPEICHERZUBEHÖR 01-2010 1.2.2 BSD PISTON ACCUMULATOR ACCESSORIES 01-2010 21
Füllschlauchverlängerung
Zur Verlängerung des im Lieferumfang enthaltenen Füll-schlauchs (für 200 bar und 300 bar Füllschlauch).
Technische Daten / Artikel-Nr.: Technical data / Part-no.:
Nennweite DN 8 nominal diameterBetriebsüberdruck (PN) max. 300 bar working pressure (PN)Betriebsmedium Stickstoff / nitrogen working mediumVerschraubungen DIN 2353 connections
Artikel-N
r. Schlauchlänge
3000 mm 4204014010 3000 mm Part no. hose length
6000 mm 4204014011 6000 mm10000 mm 4204014012 10000 mm15000 mm 4204014013 15000 mm20000 mm 4204014014 20000 mm
BSD FLASCHENDRUCKMINDERER
Beschreibung
Der Druckminderer reduziert den vorhandenen Druck des Druckerzeugers (Stickstoffflasche). Sollte der zuläs-sige Betriebsdruck des Kolbenspeichers durch den Druck-erzeuger überschritten werden, muss aus Sicherheits-gründen ein Druckminderer eingesetzt werden. Dadurch werden größere Schäden am Kolbenspeicher sowie Fol-geunfälle vermieden.
Druckminderer für Stickstoffflasche
200 bar Anschluss, nach DIN 477, Teil 1200 bar connection, by DIN 477, part 1
300 bar Anschluss, nach DIN 477, Teil 5300 bar connection, by DIN 477, part 5
Technische Daten / Artikel-Nr.: Technical data / Part-no.:
Vordruck max 200 bar 300 bar primary pressureGewinde Anschluss W24,32 x 1/14 W30 x 2 thread connectionRegelbereich 20 ... 200 bar adjustment rangeDurchfl uss max. 30 m3/h fl ow rateBetriebsmedium Stickstoff / nitrogen working medium
Betriebstemperatur -30 °C ... +60 °C working temperature
Gewicht ca. 2 kg weight
Abnahmevorschrift DGRL 97/23/EG (Artikel 3, Absatz 3)
PED 97/23/EC (articel 3, paragraph 3) acceptance regulation
Artikel.-Nr. Standard Ausführung 4204014015 4204014016 part-no. standard type
BSD BOTTLE BOTTLE PRESSURE REDUCER
Description
The pressure regulator reduces the existing pressure of the pressure generator (nitrogen bottle). Should the wor-king pressure of the piston accumulator be exceeded by the pressure generator, a bottle pressure reducer is to be used for safety reasons. This will avoid major damages to the piston and secondary accidents.
Bottle pressure reducerfor nitrogen bottle
W24
.32
x 1/
14
200
bar =
ca.
205
300
bar =
ca.
225
200/300 bar = ca. 225 mm
W30
x 2
gerändelt
W24
.32
x 1/
14
A
A1
A2
/
SW24
M20
x 1
,5
DIN
235
3
M20
x 1
,5
DIN
235
3
SW24
BSD FÜLL- UND PRÜFEINRICHTUNG
ZUBEHÖR
Filling hose extension
For the extension of the filling hose that is included in the scope of supply (200 bar and 300 bar hose).
BSD FILLING AND TESTING DEVICE
ACCESSORIES
48
BOLE
NZ
& SC
HÄ
FER
22 1.2.2 BSD KOLBENSPEICHERZUBEHÖR 01-2010 1.2.2 BSD PISTON ACCUMULATOR ACCESSORIES 01-2010
BSD ÖLSEITIGES ZUBEHÖR
ALLGEMEINE INFORMATIONEN
Alle ölseitigen Komponenten sind umfangreich geprüfte Bauteile mit hoher Zuverlässigkeit. Sie sind leckagesicher, bieten vielseitige Einsatzmöglich-keiten und sind nahezu wartungsfrei.
Abnahme
Alle Bauteile sind entsprechend ihrer Verwendung mit Öl nach DGRL 97/23/EG oder ASME Sec. VIII Div. I ausgelegt. Sie verfügen somit über alle notwen-digen Prüfungen, Zertifikate und Bauteilkennzeich-nungen, die für den ordnungsgemäßen Einsatz erforderlich sind. Grundsätzlich unterliegen alle drucktragenden Ausrüstungsteile einer Abnahme nach DGRL 97/23/EG. Bauteile mit einer Nennweite bis DN 200 und einem Druck < 1000 bar werden nach DGRL 97/23/EG (Artikel 3, Absatz 3) bewertet und bekommen somit keine CE- Kennzeichnung. Bauteile die der ASME Abnahme unterliegen, verfügen über keine Kennzeichnung, wenn die Nennweite < 6 inch beträgt. Sicherheitseinrichtungen wie Sicherheits-ventile sind aufgrund ihrer sicherheitsrelevanten Funktion immer mit der CE-Kennzeichnung bzw. bei ASME Abnahme mit dem UV-Stamp versehen.
Standard Anschlüsse
Alle BSD Öl Komponenten beruhen in ihren Anschlüssen auf den nachfolgenden Normen:
Gewindezapfen DIN 3853 / ISO 8434• Einschraubbohrung DIN 3861 Bohrungsform W• SAE-Flansch-Anschlüsse SAE J518• Avit Flansch-Anschlüsse ISO 6164• (andere Anschlüsse auf Anfrage)
Oberflächen
Die Oberflächen der einzelnen Bauteile sind vor-zugsweise galvanisch verzinkt und chromatiert. (Abweichungen siehe Komponenten Beschreibung)
Übersicht Ölseitiges Zubehör
Seite
Öl Absperrkugelhähne _____________ 23-24Öl Entlastungskugelhähne ____________ 24Zubehör Absperrventile ______________ 25Öl Sicherheits-und Absperrblock _____ 26-29BSD Übergangsstück ________________ 29Öl Sicherheits- und Entlastungsblock _ 30-31Entlasungsventil ____________________ 31Öl Sicherheitsventile ______________ 32-34
BSD OIL-SIDE ACCESSORIES
GENERAL INFORMATION
All oil-side components are tested components that provide a high degree of reliability. They are leak-proof, provide multi-use and are practically maintenance-free.
Inspection
All components are according to their use with oil and designed according to PED 97/23/EC or ASME Sec. VIII Div. I. Therefore they have all the neces-sary tests certificates and component tags which are necessary for the proper use. Basically all pres-sure containing equipments subject to a inspec-tion according to PED 97/23/EC. At nominal size < DN 200 and pressure < 1000 bar according to PED 97/23/EC (Article 3, paragraph 3) no CE marking is required. Components which are subject to inspec-tion according to ASME have no marking if the nom-inal size < 6 inch. Safety equipments such as safety valves always mark with the CE-marking or at ASME-inspection with the U-Stamp.
Standard Connections
All BSD oil-components based on their connections to the following standards:
Threaded pin DIN 3853 / ISO 8434 • Screw-in boring DIN 3861 bore Form W • SAE flange ports J518 • Avit Flange connections ISO 6164 • (Other connections on request)
Surfaces
The surfaces of the individual components are pref-erably galvanized and chromated. (Deviations see components description)
Overview oil-side accessories
page
Oil shut-off ball valves _____________ 23-24Oil discharge ball valves ______________ 24Accessories shut-off valves ___________ 25Oil safety- and shut-off block ________ 26-29BSD adapter ________________________ 29Oil safety- and discharge block ______ 30-31Discharge valve ____________________ 31Oil safety valves __________________ 32-34
BOLE
NZ
& SC
HÄ
FER
1.2.2 BSD KOLBENSPEICHERZUBEHÖR 01-2010 1.2.2 BSD PISTON ACCUMULATOR ACCESSORIES 01-2010 23
BSD ÖL ABSPERRKUGELHÄHNE
Funktion
BSD Öl Absperrkugelhähne (Abb. 1-3) dienen dem Absperren des Kolbenspeichers vom Hydrauliksystem.
DN 32 mit Innengewinde G1 1/2
Abb. 1
DN 40/50 mit SAE Flanschanschluss
Abb. 2
DN 65/80/100 mit Avit Flanschanschluss
Abb. 3
Technische Daten Abb. 1-3 Technical data fig. 1-3
Abbildung 1 2 3 fi gure
Nennweite DN 32 DN 40 DN 50 DN 65 DN 85 DN 100 nominal diameter
Betriebsüberdruck max. 400 bar max. 350 bar working pressure
Betriebsmedium Öl / oil working medium
Anschluss 2 x IGG1 1/2
SAE 1 1/2“ – 6000psi
SAE 2“ – 6000psi
Avit FA 65-5
Avit FA 80-4
Avit FA 100-4 connection
Gewicht (ca.) 4,5 kg 12,5 kg 14,5 kg 121 kg 189 kg 234 kg weight (ca.)
Abnahmevorschrift DGRL 97/23/EG (Artikel 3, Absatz 3) PED 97/23/EC (articel 3, paragraph 3) acceptance regulation
DN 32 with female thread G1 1/2
fig, 1
±0,5135.5
G1 1
/2
Ø 32
227
SW 65
83.5
144
Ø 89
DN 40/50 with SAE flange connection
fig. 2
DN 65/80/100 with avit flange connection
fig. 3
1
2
BH
DC
F
SW 70
A
Ø E
G
C
D E
B
F
TKØ
HG
2
1
A
J
DN 40 (mm) DN 50 (mm)A 164 E 38 A 203 E 48B 211 F 79,3 B 211 F 96,8C 281 G 36,5 C 316 G 44,4D 85 H 25 D 100 H 28Pos. 1 O-Ring NBR Ø47,22 x 3,53 Pos. 1 O-Ring NBR Ø56,75 x 3,53Pos. 2 8 x M16 x 55 (DIN 912) Pos. 2 8 x M20 x 65 (DIN 912)
DN 65 (mm) DN 80 (mm) DN 100 (mm)A 270 J 50 A 280 J 60 A 330 J 60B 570 F 30 B 700 F 45 B 700 F 40C 630 G Ø 248 C 750 G Ø 268 C 754 G Ø 328D 122 H Ø 190 D 142 H Ø 240 D 186 H Ø 245E 254 TKØ 145 E 304 TKØ 175 E 284 TKØ 200
Pos. 1O-Ring NBR
Pos. 1O-Ring NBR
Pos. 1O-Ring NBR
Ø75,56 x 5,33 Ø92,50 x 5,33 Ø115,00 x 7,00
Pos. 216 x M24 x 80
Pos. 28 x M30 x 105
Pos. 216 x M24 x 100
(DIN 912) (DIN 912) (DIN 912)
/
BSD OIL SHUT-OFF BALL VALVES
Function
BSD oil shut-off ball valves (fi g. 1-3) are used to seperate the piston accumulator from the hydraulic system.
42
BOLE
NZ
& SC
HÄ
FER
24 1.2.2 BSD KOLBENSPEICHERZUBEHÖR 01-2010 1.2.2 BSD PISTON ACCUMULATOR ACCESSORIES 01-2010
Artikel-Nr. Abb. 1 Part-no. fig. 1Öl Kugelhahn komplett 4204012752 oil- ball- valve complete
Artikel-Nr. Abb. 2 Part-no. fig. 2Nennweite DN 40 DN 50 nominal diameterPos. 1 O-Ring NBR 4200001950 4200001954 o-ring NBR Pos. 1Komplett mit Schrauben (Pos. 2) u. O-Ring 4204012828* 4204011789* complete with screws (Pos. 2) and o-ring
Artikel-Nr. Abb. 3 Part-no. fig. 2Nennweite DN 65 DN 80 DN 100 nominal diameterPos. 1 O-Ring NBR 4200001979 4204008785 4204009599 o-ring NBR Pos. 1Komplett mit Schrauben (Pos. 2) u. O-Ring 4204011785 4204011786 4204011787 complete with screws (Pos. 2) and o-ring
BSD ÖL ENTLASTUNGSKUGELHÄHNE
Funktion
BSD Öl Entlastungskugelhähne (Abb. 1, 2) dienen derölseitigen Druckentlastung des Kolbenspeichers.
DN 13 mit Außengewinde M24 x 1,5
Abb. 1
DN 10 für Blockaufbau
Abb. 2
Technische Daten / Artikel-Nr. Abb. 1, 2 Technical data / Part-no. fig. 1, 2
Abbildung 1 2 fi gureNennweite DN13 DN10 nominal diameterBefestigungsschrauben - 6 x M8 (10.9, DIN 912) fi xing screwsBetriebsüberdruck (PN) max. 500 bar working pressure (PN)Betriebsmedium Öl / oil working mediumGewicht (ca.) 0,7 kg 1,17 kg weight (ca.)Abnahmevorschrift DGRL 97/23/EG (Artikel 3, Absatz 3) PED 97/23/EC (articel 3, paragraph 3) acceptance regulationArtikel.-Nr. 4204004547 4200012489* part-no.
BSD OIL DISCHARGE BALL VALVES
Function
BSD oil discharge ball valves (fi g. 1, 2) serve to reduce the oil-side pressure discharge of the piston accumulator.
DN 13 with male thread M24 x 1,5
Fig. 1
DN 10 for block construction
Fig. 2
19,5 35
40
17,5
M24 x 1,5
107
39
Rohrverschraubungpipe screwing
DIN 2353 S
SW 3048
29
SW 8SW 32
7
158,
4
734415
9,5
1,8
24,545
48,5
55408
10
O-R
ing
55
27,5
7,5
8 x M8 x 18/23
Rz 10
02,5
27,5
46,555
200 40
Ø9,5
0,05
Bohrbild / hole pattern
/
BSD ÖL ABSPERRKUGELHÄHNE BSD OIL SHUT-OFF BALL VALVES
41
BOLE
NZ
& SC
HÄ
FER
1.2.2 BSD KOLBENSPEICHERZUBEHÖR 01-2010 1.2.2 BSD PISTON ACCUMULATOR ACCESSORIES 01-2010 25
BSD ZUBEHÖR ABSPERRVENTILE
BSD Druckausgleichseinrichtung *
Funktion
N2 Absperreinheiten sowie Öl Kugelhähne mit Nenn-weiten ≥ DN 40 sind zur Druckentlastung optional mit Bypassleitung erhältlich. Sie erleichtern das Betätigen des Hauptabsperrhahns und verhindern Beschädigungen an Dichtungen durch zu schnellen Druckausgleich.
BSD Abschließvorrichtung *
Funktion
Mit der BSD Abschließvorrichtung kann die Betätigung von N2-Absperreinheiten sowie von BSD ÖL Kugelhähnen mittels eines Vorhängeschlosses vor unbefugtem oder versehent-lichem Betätigen schützen. Abb. 1 off en und geschlossen abschließbar, Abb. 2 geschlossen abschließbar.Abb. 1 / fi g. 1
BSD Positionsschalter *
Funktion
Mit den BSD Positionschaltern hat man die Möglichkeit die Schaltstellungen von N2 Absperreinheiten sowie von BSD ÖL Kugelhähnen zu überwachen. Bei Abb. 4 offen und geschlossen möglich, Abb. 3 nur geschlossen.Abb. 3 / fi g. 3
* Alle Systeme sind optional erhältlich, bitte bei Bestellung mit angeben
DN 40/500/50
BSD pressure compensation device *
Function
N2 shut-off units and oil valves with sizes ≥ DN 40 are optionally available with a pressure discharge bypass line. They facilitate the movement of the main gate valve and prevent damages to seals that are due to rapid pressure equalization.
BSD closure equipment *
Function
The BSD shut-off device prevents an unauthorized or accidental operation of N2-shut-off valves and BSD oil ball valves by using a padlock. Fig. 1 locked in open or closed position, fig. 2 locked in closed position.Abb. 2 / fig. 2
BSD position switcher *
Function
The BSD position switches offer the possibility to control the switching positions of N2-shut-off valves and BSD oil ball valves. (Fig. 4 open and closed position possible, fig. 3 only closed position possible).Abb. 4 / fig. 4
* All systems are optionally available. Please indicate the requested system in your purchase order
DN 65/80/100
BSD ACCESSORIES SHUT-OFF VALVES
BOLE
NZ
& SC
HÄ
FER
26 1.2.2 BSD KOLBENSPEICHERZUBEHÖR 01-2010 1.2.2 BSD PISTON ACCUMULATOR ACCESSORIES 01-2010
Beschreibung
Der Öl Sicherheits- und Absperrblock dient zur Absi-cherung, Absperrung und Ent-lastung von Kolbenspeichern. Er berücksichtigt die europäi-schen Sicherheitsvorschriften für den Betrieb von Kolbenspei-chern, sofern die Abblaseleis-tung des integrierten Sicher-heitsventils (siehe Diagramm Seite 34), nicht kleiner ist wie die installierte Leistung des Druckerzeugers.
Ausführungen:
Manuelle Entlastung (M)
Die Entlastung des Spei-chers erfolgt standard-mäßig über ein manuelles Entlastungsventil.
Elektrische Entlastung (E)
Ein zusätzliches elek-tromagnetbetätigtes Zwei-Wegeventil erlaubt die automatische Ent-lastung des Speichers. Es sind zwei Ausfüh-rungen lieferbar, stromlos offen bzw. geschlossen.
Technische Daten: Technical data:
Nennweite DN 10 DN 20 DN 30 nominal diameter
Betriebsüberdruck (PN) max. 350 bar working pressure (PN)
Betriebsmedium ÖL / oil working medium
Material Stahl / steel material
Betriebstemperatur -15 ... +80 °C working temperature
Abnahmevorschrift * DGRL 97/23/EG (Artikel 3, Absatz 3) PED 97/23/EC (articel 3, paragraph 3) acceptance regulation *
Leitungsdose Sitzventil DIN EN 175301-803 plug-in connectors poppet valve
Schutzart IP 65 connector
Gewicht (Ausführung M) 5,2 kg 8,5 kg 20,5 kg weight (design M)
Gewicht (Ausführung E) 5,5 kg 8,8 kg 20,8 kg weight (design E)
* Öl Sicherheitsventil mit CE Kennzeichnung * oil- safety valves with CE marking
/
BSD ÖL SICHERHEITS- UND ABSPERR-
BLOCK DN 10/20/30
S M1 M2
P T1 3 2
S M1 M2
P T
1 3 2 4
Ausführung MDesign M
Ausführung EDesign E
Description
The oil safety- and shut-off block serves as a device for the protection, shut-off and dis-charge of piston accumulators. Their construction observes the European safety regula-tions for the operation of piston accumulators, provided that the discharge capacity of the integrated safety valve (see dia-gram on page 34) is not smaller than the installed output of the
pressure generator.
Designs:
Manual discharge (M)
Standardly, the dis-charging of the accu-mulator is eff ected by a manual discharge valve.
Electrical discharge (E)
An additional electro-magnetic operating two-way valve per-mits the automatic discharge of the accu-mulator. There are two types available, which are dead open or closed.
BSD OIL SAFETY- AND SHUT-OFF BLOCK
DN 10/20/30
Speicheranschluss S accumulator connectionMeßanschluss 1+2 M1, M2 measuring connection 1+2Pumpenanschluss P pump connectionTankanschluss T tank connectionSystem Absperrhahn 1 system shut-off valveSicherheitsventil 2 safety valveManuelle Entlastung 3 manual dischargeElektr. Entlastung (optional) 4 electr. discharge (optional)
24
13
4
BOLE
NZ
& SC
HÄ
FER
1.2.2 BSD KOLBENSPEICHERZUBEHÖR 01-2010 1.2.2 BSD PISTON ACCUMULATOR ACCESSORIES 01-2010 27
SAB - ... - ... - ... - ... - ... - ...
Typ
Nennweite10 mm =20 mm =30 mm =
102030
Entlastung Manuell =
Elektrisch, stromlos off en =Elektrisch, stromlos geschlossen =
MEO EG
Anschlussspeicherseitig
mit Übergangsstück:SAE-1 1/2" - 6000psi (Seite 29) =
ohne Übergangsstück: M50 x 1,5 (Seite 28) =
1
2
* Einstelldruck Sicherheitsventil 200, 220, 280, 350 bar = ...
Dichtungen NBR =FKM =
MV
Spannung (nur Ausfüh-rung EO, EG)
24 VDC =110 VDC =230 VDC =
24110230
TYPENSCHLÜSSEL ÖL SICHERHEITS-
UND ABSPERRBLOCK (SAB)
Beispiel:SAB - 30 - EQ - 1 - 350 - M - 24Bestellbezeichnung ist:Typ: SABNennweite: 30 mmEntlastung: Elektrisch (stromlos off en)Anschluss Speicherseitig: SAE-1 1/2" Einstelldruck Sicherheitsventil: * 350 barDichtungen: NBRSpannung: 24 VDC
Bestellbezeichnung order designation
* andere Einstelldrücke auf Anfrage * other set pressures are available upon request
Example:SAB - 30 - EQ - 1 - 350 - M - 24order designation is:typ: SABdiameter: 30 mmdischarge: electrical (power off open)connection to accumulator: SAE-1 1/2"set pressure safety valve: * 350 barseals: NBRvoltage: 24 VDC
type
102030
= 10 mm= 20 mm= 30 mm
diameter
MEO EG
= manually operated= electrical power-off open= electrical power-off closed
discharge
1
2
with adapter:= SAE - 1 1/2" - 6000psi (page 29)
without adapter:= M50 x 1,5 (page 28)
connection to accumulator
... = 200, 220, 280, 350 bar set pressure safety valve *
MV
= NBR = FKM seals
24110230
= 24 VDC= 110 VDC= 230 VDC
voltage (only EO,EG version)
TYPE CODE OIL SAFETY- AND
SHUT-OFF (SAB)
BOLE
NZ
& SC
HÄ
FER
28 1.2.2 BSD KOLBENSPEICHERZUBEHÖR 01-2010 1.2.2 BSD PISTON ACCUMULATOR ACCESSORIES 01-2010
Öl Sicherheits- und Absperrblock DN 10 *
Öl Sicherheits- und Absperrblock DN 20 *
Öl Sicherheits- und Absperrblock DN 30 *
* Abblaseleistung Öl Sicherheitsventile siehe Seite 34 * for discharge capacity oil safety valves see page 34
48
(T) 67 20
3
50
M2
182
M1
42
P
206
107
46
5
6
25
85
94
110
8
8
2 x Ø9T
M2
S
63 10
0 11
6
1
2
3
4
35
Ansicht / view
Oil safety- and shut-off block DN 10 *
97
130
41 T
M2
S
120
142
33
140
M1
39,5
261
39,5
P
46,5
75
223
62
206
(T)
6 1
2
3
4
5
Ansicht / view
Oil safety- and shut-off block DN 20 *
Oil safety- and shut-off block DN 30 *
BSD ÖL SICHERHEITS- UND
ABSPERRBLOCK
T45,3 125
175
M2
S
160
181
50
M1
P
174
334
50
50
(T)
266
6310
3 252 52
6
3
4
1
2
5
Ansicht / view
BSD OIL SAFETY- AND
SHUT-OFF BLOCK
24
13
4
BOLE
NZ
& SC
HÄ
FER
1.2.2 BSD KOLBENSPEICHERZUBEHÖR 01-2010 1.2.2 BSD PISTON ACCUMULATOR ACCESSORIES 01-2010 29
Pos. Benennung DN 10 DN 20 DN 30 part name pos.S Speicher- Übergangsstück Anschluss M50 x 1,5 accumulator- adapter connection SM1, M2 Messanschluss 1+2 G1/4 measuring connection 1+2 M1, M2P Pumpenanschluss G1/2 G1 G1 1/2 pump connection PT Tankanschluss G3/8 G1/2 G1 tank connection T1 Block - block 12 System Absperrhahn - system shut-off valve 23 Öl Sicherheitsventil DN 6 DN 10 DN 20 * oil-safety valve 34 Manuelle Entlastung - manual discharge 45 Elektr. Entlastung (wahlweise) - electrical discharge (optional) 56 Typenschild - name plate 7* mit Öl Sicherheitsventil NG 30 auf Anfrage * with oil- safety valve NG 30 upon request
BSD ÜBERGANGSSTÜCK Das BSD Übergangsstück dient dem Anschluss des Öl Sicherheits- und Absperrblock an dem Kolben-speicher. Es ermöglicht eine Ausrichtung des Blo-ckes auf die anzuschließenden Komponenten / Rohrleitungen. Unter bestimmten Umständen, z. B. bei zentrischem Anschluss im Speicherstutzen, kann auf dieses Bauteil verzichtet werden.
Technische Daten / Artikel-Nr. Technical data / Part-no.
Nennweite DN 32 nominal diameter
Betriebsmedium ÖL / oil working medium
Geeignet für DN10/20/30 suitable for
Material Normalstahl - NBR / carbon steel - NBR materials
Temperaturbereich -15 °C ... +80 °C temperature range
Gewicht 3,1 Kg weight
Abnahmevorschrift DGRL 97/23/EG (Artikel 3, Absatz 3) PED 97/23/EC (articel 3, paragraph 3) acceptance regulation
Pos. 1 Übergangsstück 4200030844 adapter Pos. 1
Pos. 2 O-Ring (Ø47,2 x 3,5) 4200001950 o-ring (47,2 x 3,5) Pos. 2
Pos. 3 Schrauben (DIN 933) 4200002733 screws (DIN933) Pos. 3
Pos. 4 SAE Flanschhälften 4200030843 SAE fl ange halves Pos. 4
Übergangsstück komplett 4200030842 adapter complete
36,5
79,4
SW 6
5
SAE - 1 1/2“ - 6000psi
20
M16
x 5
0
Ø 32
100
M50
x 1
,5
3
2
14
23
A
A
AnschlussKolbenspeicher
connectionaccumulator
AnschlussSich. u. Absperrblockconnectionoil safety and relieving block
/
BSD ADAPTER
The BSD adapter is used to connect the oil safety and shut-off block with the piston accumulator. It also allows aligning the block with the components and the pipe lines that are to be connected. Under certain circumstances, for example in case of a cen-tric connection in the accumulator nozzle, this part can be omitted.
BOLE
NZ
& SC
HÄ
FER
30 1.2.2 BSD KOLBENSPEICHERZUBEHÖR 01-2010 1.2.2 BSD PISTON ACCUMULATOR ACCESSORIES 01-2010
BeschreibungDer Sicherheits- und Entlastungsblock ist zur Druckabsi-cherung und Entlastung von BSD Kolbenspeichern und Speicheranlagen konzipiert. Der Block entspricht den Anforderungen der DGRL 97/23/EG. Je nach vorhandenem Druck-Öl-Strom wird der Block mit 2 bis 5 direkt gesteu-erten Sicherheitsventilen NG 10 (Pos. 3) ausgerüstet. Die Anzahl der Sicherheitsventile ist so zu wählen, dass die Förderleistung des Druckerzeugers abgedeckt wird. Hierbei multipliziert sich der Volumenstrom mit der Anzahl der Sicherheitsventile. Die Sicherheitsventile sind Baumustergeprüft und werden mit TÜV-Einstellbeschei-nigung geliefert. Der Block ist serienmäßig mit einem manuellen (Pos. 1) und einem elektri-schen (Pos. 2) Druckentlastungsventil ausgestattet. Das elektromagnetische 2-Wege-Ventil (Pos. 2) ist stromlos offen geschaltet und sorgt im Falle eines Stromausfalles für die automatische Ent-lastung des Speichers. Zum Anschluss einer Druckanzeige verfügt der Block über einen Messanschluss (M) G ¼.
Technische Daten / Artikel-Nr. Technical data / Part-no.
Betriebsüberdruck (PN) max. 400 bar working pressure (PN)Betriebsmedium ÖL / oil working mediumMaterial (Oberfl äche konserviert) Stahl / steel material (surface conserved)Temperaturbereich -25°C ... +80°C temperature rangeSpannung Entlastungsventil 24 VDC voltage discharge valveAbnahmevorschrift (1) DGRL 97/23/EG (Artikel 3, Absatz 3) PED 97/23/EC (articel 3, paragraph 3) acceptance regulation (1)
Pos. 1 Platten-Kugelhahn DN10 4200012489 oil-plate ball valve DN10: Pos. 1Pos. 2 Magnet-Sitzventil 24V 4200036319 magnet poppet-valve 24V: Pos. 2Pos. 3 Sicherheitsventil NG10 4202015076 safety valve NG10: Pos. 3Pos. 4 Block 4204001845 block: Pos. 4Pos. 5 Verschlussschraube G1/4 4200017998 screw plug G1/4: Pos. 5Öl Sicherheits- und Entlastungsblock komplett mit... Oil safety- and discharging block complete with ...... 2 Sicherheitsventilen (2) 4204001811 ... 2 safety valves (2) ... 3 Sicherheitsventilen (2) 4204001848 ... 3 safety valves (2) ... 4 Sicherheitsventilen (2) 4204001849 ... 4 safety valves (2) ... 5 Sicherheitsventilen (2) 4204001850 ... 5 safety valves (2) (1) Öl Sicherheitsventile mit CE Kennzeichnung(2) gewünschten Einstelldruck bitte mit angeben
(1) oil-safety valves with CE marking(2) please specify/indicate the pressure setting in your purchase order
P
T
1 3.12
M
3.5
Messanschluss (G1/4) M measuring connection (G1/4)
Pumpenanschluss (SAE 1 1/2" 6000psi) P pump connection
(SAE 1 1/2" 6000psi)
Tankanschluss (SAE 2" 3000psi) T tank connection (SAE 2" 3000psi)Manuelle Entlastung 1 manual dischargeElektrische Entlastung 2 electrical discharge
Öl Sicherheitsventil 2 ... 5 Ventile (DN10) 3.1 ... 3.5 oil safety valve
2 ... 5 valves (DN10)
/
BSD ÖL SICHERHEITS- UND
ENTLASTUNGSBLOCK
DescriptionThe safety- and discharge block is designed for the pres-sure fuse-protection and for discharging of BSD piston accumulators and piston accumulator units. The block meets the requirements of the DGRL 97/23/EC directive. Depending on the pressure oil flow, the block is equipped with 2 to 5 directly controlled safety valves NG 10 (Pos. 3). The number of the safety valves has to be dimensioned for the whole flow rate of the pressure generator. In this context, the flow rate is multiplied by the number of safety valves. The safety valves are type-tested and deli-vered with a TÜV-adjustment certificate. The block is stan-
dardly equipped with a manual (Pos. 1) and an electric (Pos. 2) pressure discharge valve.
The electromagnetic 2-way-valve (Pos. 2) is currentless and it automa-tically discharges the accumulator in case of a power failure. The block provides a measuring connection (M) G ¼ for a pressure indicator.
it
T
BSD OIL SAFETY- AND
DISCHARGE BLOCK
34
14
BOLE
NZ
& SC
HÄ
FER
1.2.2 BSD KOLBENSPEICHERZUBEHÖR 01-2010 1.2.2 BSD PISTON ACCUMULATOR ACCESSORIES 01-2010 31
* Abblaseleistung Öl Sicherheitsventile NG 10, siehe Seite 34 * for discharge capacity oil safety valves NG 10 see page 34
BSD ÖL ENTLASTUNGSVENTIL
Beschreibung:
BSD Entlastungsventile sind direkt gesteuerte 2/2 Wegesitzventile die der hydraulikseitigen Entlas-tung des Kolbenspeichers dienen. Sie sind elektro-magnetisch betätigt und für den Plattenaufbau gedacht. Entlastungsventile mit Rohrleitungsan-schlüssen nach Kundenwunsch auf Anfrage.
Technische Daten / Artikel-Nr. Technical data / Part-no.
Betriebsüberdruck (PN) max. 400 bar working pressure (PN)Betriebsmedium ÖL / oil working mediumSpannung 24 VDC voltageElektrischer Anschluss DIN EN 175 301-803 A electrical connectionVolumenstrom max. 25 l/min fl ow rate max.Betriebstemperatur -25°C ... +80°C temperature rangeGewicht 1,4 kg weightAbnahmevorschrift DGRL 97/23/EG (Artikel 3, Absatz 3) PED 97/23/EC (articel 3, paragraph 3) acceptance regul.Artikel.-Nr. 4200036319 part-no.
23 Nm
5643
3218
31
26
5510
71,5
62,5
50
Ø50
16,6
5,1
M8
11
38,8
6,5
39
keine Funktionno function
R P
/
36.5
79.4
100
50
158
45 L2L1
Ø41
Ø14
120ca
. 214
ca. 277
158
20
2542.9
77.8
40
59
150
Ø48
P
3
M 16 x 25
5
4
1
M
2
M12 x 20
T
BSD OIL DISCHARGE VALVE
Description:
BSD discharge valves are directly controlled 2/2 way valves for discharging the hydraulic side of the piston accumulator. They are electromagnetically operated and designed for block construction. Cus-tomized discharging valves with pipe connections are available upon request.
Abmessung bei L1 (mm) L2 (mm) Gewicht / weight (kg) dimension by2 Sicherheitsventilen * 230 140 42 2 safety valves *3 Sicherheitsventilen * 280 190 51 3 safety valves *4 Sicherheitsventilen * 330 240 59,5 4 safety valves *5 Sicherheitsventilen * 380 290 67 5 safety valves *
44
BOLE
NZ
& SC
HÄ
FER
32 1.2.2 BSD KOLBENSPEICHERZUBEHÖR 01-2010 1.2.2 BSD PISTON ACCUMULATOR ACCESSORIES 01-2010
Beschreibung
BSD Öl Sicherheitsventile sind direktgesteuerte Sitz-ventile. Sie dienen der Begrenzung des Systemdru-ckes. Übersteigt der Systemdruck den Einstelldruck, so öffnet das Ventil und das Fluid strömt über den T-Kanal zurück in den Tank. Fällt der Systemdruck ca. 10% unter den des Einstelldruckes, schließt das Ventil wieder. Um größerer Volumenströme wie in den Diagrammen aufgeführt zu erzielen, besteht die Möglichkeit, mehrere Sicherheitsventile parallel einzusetzen. Öl Sicherheitsventile sind Baumuster-geprüfte Bauteile nach DGRL 97/23/EG. Wir bieten die Druckbegrenzungsventile als Einschraubventil (Abb.1) oder mit Gewindeanschlüssen (Abb. 2) an.
BSD Sicherheitsventile als Einschraubventil
für Blockeinbau
Abb. 1
Abmessungen Sicherheitsventil
Abmessungen Einschraubbohrung
NG SW1 SW2 SW3 SW4 SW5 D1 L17 L246 32 30 19 6 - 34 72 64,5
10 36 30 19 6 - 38 68 7720 46 36 19 6 - 48 65 10630 60 46 19 - 13 63 83 131
Dimension safety valve
NG D14 ØD15 ØD16 ØD17 ØD18 ØD19 L25 L26 L27 L28 L29 L30 L31 α16 M28 x 1,5 25 H9 6 15 24,9 12 15 19 30 36 45 56,5±5,5 65 15°
10 M35 x 1,5 32 H9 10 18,5 31,9 15 18 23 35 41,5 52 67,5±7,5 80 15°20 M45 x 1,5 40 H9 20 24 39,9 22 21 27 45 55 70 91,5±8,5 110 20°30 M60 x 2 55 H9 30 38,75 54,9 34 23 29 45 63 84 113,5±11,5 140 20°
+0,152-0,2
+0,162 -0,2
+0,162 -0,2
+0,172 -0,2
Dimension screw-in tap hole
BSD ÖL SICHERHEITSVENTILE
DN 6-30
Description:
BSD Oil safety valves are directly controlled seat valves and serve to limit the system pressure. If the system pressure exceeds the pressure setting the valve opens and the fluid flows through the T-channel back into the tank. If the system pres-sure drops approximately 10% below the pres-sure setting the valve closes again. In order to reach volume flows that are higher than those mentioned in the diagram, several safety valves can be used parallelly. Oil safety valves are type-tested components according to the DGRL 97/23/EC directive. We provide pressure discharge valves as screw-in valves (fig.1) or with threaded connec-tions (fig. 2).
BSD Oil safety valve as cartridge valve for
block installation
fig. 1
ØD
1
L24L17
SW2 SW1SW3SW4
ØD
1 Ø2,5
SW5 L17
ØD16
ØD19 -0,2
ØD
17
L25L26
L28
L27
ØD
18L29
L30L31
ØD
15D
14
α1
A
Ø0,1 A
0,5 x 45
PT
NG 30
< NG 20
L24
Ø0,05 A
Rz 10
BSD OIL SAFETY VALVES
DN 6-30
43
BOLE
NZ
& SC
HÄ
FER
1.2.2 BSD KOLBENSPEICHERZUBEHÖR 01-2010 1.2.2 BSD PISTON ACCUMULATOR ACCESSORIES 01-2010 33
BSD Öl Sicherheitsventile mit Anschluss-
block für Rohrleitungseinbau
Abb. 2
Abmessungen Block
Technische Daten (Abb. 1, 2) Technical data (fig. 1, 2)
Nennweite DN 6 DN 10 DN 20 DN 30 nominal diameter
Betriebsmedium ÖL / oil working medium
Betriebstemperatur -30°C ... +80°C temperature range
Viskositätsbereich 12 ... 230 mm2/s viscosity range:
Abnahmevorschrift DGRL 97/23/EG (mit CE Kennzeichnung) PED 97/23/EC (with CE marking) acceptance regulation
Gewicht Einschraubventil 0,4 kg 0,5 kg 1,0 kg 2,2 kg weight cartridge valve
Gewicht mit Anschlussblock 1,5 kg 3,7 kg 6,4 kg 13,9 kg weight with connecting block
Artikel-Nr. Einschraubventil (Abb. 1)* Part-no. cartridge valve (fig. 1)*Nennweite DN 6 DN 10 DN 20 DN 30 nominal diameter
Art
ikel
-Nr.
200 bar 4204013262 4204011868 4204011891 4204011896 200 bar
Part
-no.220 bar 4204013263 4204005601 4204011892 4202014074 220 bar
280 bar 4204013264 4204011869 4204011893 4204011897 280 bar
350 bar 4204013265 4202015076 4204011894 - 350 bar
375 bar 4204013266 4204011890 4204011895 - 375 bar:
Artikel-Nr. Sicherheitsventil mit Anschlussblock (Abb. 2)* Part-no. safety valve with connecting block (fi g. 2)*
Nennweite DN 6 DN 10 DN 20 DN 30 nominal diameter
Art
ikel
-Nr.
200 bar 4204013309 4204011880 4204011874 4204011878 200 bar
Part
-no.220 bar 4204013310 4204011898 4202014520 4202014731 220 bar
280 bar 4204013311 4204011881 4204011875 4204011879 280 bar
350 bar 4204013312 4204011882 4204011876 - 350 bar
375 bar 4204013313 4204011883 4204011877 - 375 bar:
*andere Einstelldrücke auf Anfrage *other set pressures are available upon request
P
T1
T2
NG B1 B2 D1 D2 D3 D4 H1 H2 L1 L2 L3 L4 L5 L6 T16 45 60 25 G1/4 6,6 M6 25 40 80 4 15 55 40 20 10
10 60 80 34 G1/2 9 M8 40 60 100 4 20 70 48 21 1520 70 100 47 G1 9 M8 50 70 135 5,5 20 100 65 34 1830 100 130 65 G1 1/2 11 M10 60 90 180 5,5 25 130 85 35 20
Dimension Block
/
BSD Oil safety valve with connecting block
for pipe installation
fig. 2
L6P1
P2
T
PT
ØD1 D2
L2L1
L4L5
L3
B1 B2
H2
H1
D4
B1
ØD3
P2
43
BOLE
NZ
& SC
HÄ
FER
34 1.2.2 BSD KOLBENSPEICHERZUBEHÖR 01-2010 1.2.2 BSD PISTON ACCUMULATOR ACCESSORIES 01-2010
400
300
405060
80
200
300 12 20 28 36 44 52
100111
Volumenstrom in l/min
Bet
rieb
sdru
ck in
bar
nicht realisierbar
Volumenstromdiagramm Sicherheitsventil NG 6 Flow-rate diagram safety valve NG 6
flow- rate in l/min
wor
king
pre
ssur
e in
bar
not realizable
300
405060
80
200
300 20 40 60 80 100 120
100
140
171
400
Volumenstrom in l/min
Bet
rieb
sdru
ck in
bar
nicht realisierbar
160150120
630
nicht realisierbar
Volumenstromdiagramm Sicherheitsventil NG 10 Flow-rate diagram safety valve NG 10
flow- rate in l/min
wor
king
pre
ssur
e in
bar
not realizable
not realizable
KENNLINIEN
BSD ÖL SICHERHEITSVENTILE
Hinweis:Bei der Verwendung mehrerer gleicher Öl Sicherheitsventile, er-höht sich der Volumenstrom um die Anzahl der Sicherheitsventile.
CHARACTERISTIC DIAGRAM
BSD OIL SAFETY VALVES
Note:When using several identical oil safety valves, the volume stream will increase by the quantity of the safety valves.
Volumenstrom in l/min
Bet
rieb
sdru
ck in
bar
Volumenstromdiagramm Sicherheitsventil NG 20 Flow-rate diagram safety valve NG 20
flow- rate in l/min
wor
king
pre
ssur
e in
bar
400
200
405060
80
100
300 30 60 90 120 150 180
300
120140160180
220260
316
240280
nicht realisierbarnot realizable
Volumenstrom in l/min
Bet
rieb
sdru
ck in
bar
Volumenstromdiagramm Sicherheitsventil NG 30 Flow-rate diagram safety valve NG 30
flow- rate in l/min
wor
king
pre
ssur
e in
bar
400
200
405060
80
100
300 60 120 180 240 300 360
300
120140160180
240260
220
280316
nicht realisierbarnot realizable
BOLE
NZ
& SC
HÄ
FER
1.2.2 BSD KOLBENSPEICHERZUBEHÖR 01-2010 1.2.2 BSD PISTON ACCUMULATOR ACCESSORIES 01-2010 35
NOTIZEN NOTES
BOLE
NZ
& SC
HÄ
FER
36 1.2.2 BSD KOLBENSPEICHERZUBEHÖR 01-2010 1.2.2 BSD PISTON ACCUMULATOR ACCESSORIES 01-2010
BSD MESS- UND ANZEIGESYSTEME
ALLGEMEINE INFORMATIONEN
Alle BSD Komponenten der BSD Messtechnik sind umfangreich geprüfte Bauteile mit hoher Zuverläs-sigkeit. Sie sind leckagesicher, bieten vielseitige Ein-satzmöglichkeiten und sind nahezu wartungsfrei. Messtechnische Instrumente zur Erfassung physika-lischer Größen, rechnergestützt z. B. zur Auswertung von Druckverhältnissen, oder zur manuellen Erfas-sung des Druckes, sollten aus sicherheitstechnischen Gründen grundsätzlich installiert sein (TRB 403). Sie sind gemäß DGRL 97/23/EG jedoch nicht als Ausrüs-tungsteile mit Sicherheitsfunktion einzustufen. Um höchst mögliche Flexibilität bieten zu können, sind Installationen kundenorientierter Messsysteme, z. B. explosionsgeschützer Bauteile problemlos möglich. (Kolbenpositionsanzeigen siehe Broschüre 1.1.3).
Abnahme:
Druckmessgeräte (mechanische Manometer und Drucksensoren) werden laut DGRL 97/23/EG als drucktragende Ausrüstungsteile eingestuft. BSD Manometer ab einem Messbereich von 200 bar sind immer mit CE-Kennzeichnung versehen. Drucksen-soren unterliegen neben der Druckgeräterichtlinie auch der EMV-Richtlinie 89/336/EWG (elektromag-netische Verträglichkeit) und verfügen somit immer über eine CE-Kennzeichnung. Andere Baugrup-penkomponenten werden individuell, abhängig von Medium, Druck, Volumen und Nennweite, betrachtet und ggf. mit einer CE-Kennzeichnung versehen (siehe Komponentenbeschreibung).
Standard Anschlüsse:
Alle BSD Mess- und Anzeigesysteme beruhen in ihren Anschlüssen auf den nachfolgenden Normen:
Anschluss-Zapfen/Bohrungen DIN ISO 228-1• Gewindezapfen DIN 3853 / ISO 8434• Einschraubbohrung DIN 3861 Bohrungsform W• (andere Anschlüsse auf Anfrage)
Oberflächen:
Die Oberflächen der einzelnen Bauteile sind vor-zugsweise galvanisch verzinkt und chromatiert. (Abweichungen siehe Komponenten Beschreibung)
Übersicht BSD Mess- und AnzeigesystemeSeite
Doppelfrontplatte ___________________ 37Manometeranschluss Gasseite ________ 38Manometeranschluss Ölseite __________ 39Elektronischer Druckschalter ________40-41Mechanischer zweifach Druckschalter ___ 42Elektronischer Druckaufnehmer _______ 43
BSD MEASSURING AND DISPLAY
DEVICES GENERAL INFORMATION
All BSD components are tested components that offer high reliability. They are leak-proof, provide multi-use and are virtually maintenance free. Meas-uring instruments for detecting physical sizes that are computerized, e.g. for the evaluation of pressure conditions or for the manual detection of pressure, should always be installed for technical safety rea-sons (TRB 403). In accordance with the DGRL 97/23/EC directive they are not to be classified as equip-ment parts with safety functions. In order to be able to offer the highest degree of flexibility, custom-ized measurement systems, e.g. those of explosion-proofed components, are available. (For piston posi-tion indicators see paragraph 1.1.3 of the brochure).
Inspection:
Pressure gauges (mechanical pressure gauges and pressure sensors) are classified according to the DGRL 97/23/EC directive as pressurized equipment parts. BSD manometers that exceed 200 bar are always CE- marked. Pressure sensors are subject to the Pressure Equipment Directive and the EMC Directive 89/336/ EEC (electromagnetic compat-ibility). Therefore, they are always CE-marked. Other assembly components are considered individually with regard to their medium, pressure, volume, and diameter. They are CE-marked if necessary. (See description of components).
Standard Connections:
The connections of all BSD measuring and indicator devices observe the following standards:
Connection pin/boring DIN ISO228-1• Threaded pin DIN 3853 / ISO 8434 • Screw-in boring DIN 3861 bore Form W • (Other connections on request)
Surfaces:
The surfaces of the individual components are pref-erably zinc plated and chromated. (For variations see description of components)
Overviev
BSD Meassuring and display devicesSeite
Double front panel __________________ 37Pressure gauge for gas-side ___________ 38Pressure gauge for oil-side ___________ 39Electronical pressure switch _________40-41Mechanic dual setpoint pressure switch _ 42Electronical pressure transducer _______ 43
BOLE
NZ
& SC
HÄ
FER
1.2.2 BSD KOLBENSPEICHERZUBEHÖR 01-2010 1.2.2 BSD PISTON ACCUMULATOR ACCESSORIES 01-2010 37
Beschreibung:
Die BSD Doppelfrontplatte beinhaltet meh-rere Funktionen in einem sehr kompakten Ausmaß. Ergonomisch optimal platziert, hat man die Möglichkeit den Druck auf der Stickstoff- sowie auf der Ölseite abzulesen, die Stickstoffbefüllung anhand des BSD Füllventils durchzuführen und den Druck Öl- und Gasseitig zu entlasten. Zusätzlich verfügt die Doppelfrontplatte noch über einen ölseitigen Prüfanschluss.
Die Doppelfrontplatte besteht im Wesentlichen aus: Essential components of the double front panel:
1 BSD Füllventil (siehe Seite 18) 1 BSD fi lling valve (see page 18)2.1 Manometer Gasseite 2.1 pressure gauge gas-side2.2 Manometer Ölseite 2.2 pressure gauge oil-side3 Prüfanschluss (M20 x 1,5) 3 testing connection (M20 x 1,5)4.1 Druckentlastungsventil Gasseite 4.1 pressure discharge valve gas-side4.2 Druckentlastungsventil Ölseite 4.2 pressure discharge valve oil-side4.3 Absperrventil Druckanschluss Gasseite 4.3 shut- off valve pressure connection gas-side4.4 Absperrventil Druckanschluss Ölseite 4.4 shut- off valve pressure connection oil-side5 Anschluss Öl Entlastung (M16 x 1,5; DIN 3853) 5 connection oil discharge (M16 x 1,5; DIN 3853)6 Anschluss Gas Entlastung (M16 x 1,5; DIN 3853) 6 connection gas discharge (M16 x 1,5; DIN 3853)7 Druckanschluss Ölseite (M16 x 1,5; DIN 3853) 7 pressure connection oil-side (M16 x 1,5; DIN 3853)8 Druckanschluss Gasseite (G3/4) 8 pressure connection gas-side (G3/4)9 Messanschluss Gasseite (G1/2) 9 measuring connection gas-side (G1/2)
Technische Daten / Artikel-Nr. Technical data / Part-no.
Betriebsüberdruck (PN) max. 350 bar working pressure (PN)Nennweite DN 6 nominal diameterBetriebsmedium Öl / Stickstoff - oil / nitrogen working mediumGewicht ca. 19 kg weightManometer (bar/psi) NG 100 (DIN 16005), Glycerine pressure gauge (bar/psi)Abnahmevorschrift DGRL 97/23/EG (Artikel 3, Absatz 3) / PED 97/23/EC (articel 3, paragraph 3) acceptance regulation
Doppelfrontplatte 0 ... 160 bar 4204014294 double front panel 0 ... 2.300 PSIDoppelfrontplatte 0 ... 250 bar* 4204014295 double front panel 0 ... 3.600 PSI*Doppelfrontplatte 0 ... 350 bar* 4204014296 double front panel 0 ... 5.080 PSI** Maße können geringfügig abweichen * Dimensions may vary slightly
460
340
ca. 148
ca. 207
518
265
15
290 25
1
2.1
2.2
3
4.1
4.2
4.34.4
5
76
419
M8
19 8
375 16 89
BSD DOPPELFRONTPLATTE BSD DOUBLE FRONT PANEL
Description:
The BSD double front panel includes sev-eral functions in a very compact propor-tion. Due to its ergonomically ideal posi-tion, it gives the options of reading the pressure on the nitrogen-side as well as on the oil-side, of executing the nitrogen filling by use of the BSD filling valve and of discharging the pressure on the oil-side and on the gas-side. In addition, the double front panel also provides an oil-side test connection.
52
41
BOLE
NZ
& SC
HÄ
FER
38 1.2.2 BSD KOLBENSPEICHERZUBEHÖR 01-2010 1.2.2 BSD PISTON ACCUMULATOR ACCESSORIES 01-2010
Beschreibung:
Der Manometeranschluss Gasseite dient dem Messen des gasseitigen Druckes sowie dem Befüllen von BSD Kolbenspeichern und Kolbenspeicheran-lagen mit Stickstoff.
Technische Daten / Artikel-Nr. Technical data / Part-no.
Betriebsüberdruck (PN) max. 350 bar working pressure (PN)
Nennweite DN 6 nominal diameter
Betriebsmedium Stickstoff / nitrogen working medium
Gewicht ca. 6,5 kg weight
Manometer (bar/psi) NG 100 (DIN 16005), Glycerine pressure gauge (bar/psi)
Abnahmevorschrift DGRL 97/23/EG (Artikel 3, Absatz 3) / PED 97/23/EC (articel 3, paragraph 3) acceptance regulation
Pos. 1.1 Manometer 0 ... 160 bar 4204002202 pressure gauge 0 ... 2.300 PSI Pos. 1.1
Pos. 1.2 Manometer 0 ... 250 bar (1) 4200048600 pressure gauge 0 ... 3.600 PSI (1) Pos. 1.2
Pos. 1.3 Manometer 0 ... 400 bar (1) 4200048601 pressure gauge 0 ... 5.800 PSI (1) Pos. 1.3
Pos. 2 Absperrventil 4200001043 shut-off valve Pos. 2
Pos. 3 Füllventil (1) (2) (siehe Seite 18): 4200003520 fi lling valve (1) (2) (see page 18) Pos. 3
Pos. 4 Verschlussschraube G1/2 (3) 4200040337 screw plug G1/2 (3) Pos. 4
Manometeranschluss komplett 0 ... 160 bar 4200042771 pressure gauge complete 0 ... 2.300 PSI
Manometeranschluss komplett 0 ... 250 bar 4200036303 pressure gauge complete 0 ... 3.600 PSI
Manometeranschluss komplett 0 ... 350 bar 4200033271 pressure gauge complete 0 ... 5.080 PSI(1) mit CE-Kennzeichnung gemäß DGRL 97/23/EG(2) passende Füll- u. Prüfeinrichtung siehe Seite 19(3) mit Druckentlastung
(1) with CE-marking acc. to PED 97/23/EC (2) for suitable filling and testing device see page 19 (3) with pressure release
2 x M8
80
Ø 65
70
G 3/4
258
4 Messanschluss G1/2 meassuring connection G1/2
45°
Füll- und Prüfanschluss G3/4 *Filling a. test connection G3/4 *
1
2
3
102,
5
Ø 100
G3/4 G1/2
Druckanschlusspressure connection
BSD MANOMETERANSCHLUSS
GASSEITE
Description:
The pressure gauge on the gas-side serves to measure the gas-side pressure and to fi ll the BSD piston accumu-lators and the piston accumulator units with nitrogen.
BSD PRESSURE GAUGE
FOR GAS-SIDE
41
BOLE
NZ
& SC
HÄ
FER
1.2.2 BSD KOLBENSPEICHERZUBEHÖR 01-2010 1.2.2 BSD PISTON ACCUMULATOR ACCESSORIES 01-2010 39
Beschreibung:
Der Manometeranschluss Ölseite dient dem Messen des ölseitigen Druckes von BSD Kolbenspeichern und Kolbenspeicheranlagen. Das Absperrventil (Pos. 2) verfügt zusätzlich über einen Prüfanschluss.
Technische Daten / Artikel-Nr. Technical data / Part-no.
Betriebsüberdruck (PN) max. 400 bar working pressure (PN)
Nennweite DN 2 nominal diameter
Betriebsmedium Öl / oil working medium
Gewicht ca. 4,5 kg weight
Manometer (bar/psi) NG 100 (DIN 16005), Glycerine pressure gauge (bar/psi)
Abnahmevorschrift DGRL 97/23/EG (Artikel 3, Absatz 3) / PED 97/23/EC (articel 3, paragraph 3) acceptance regulation
Pos. 1.1 Manometer 0 ... 160 bar 4204002202 pressure gauge 0 ... 2.300 PSI Pos. 1.1
Pos. 1.2 Manometer 0 ... 250 bar (1) 4200048600 pressure gauge 0 ... 3.600 PSI (1) Pos. 1.2
Pos. 1.3 Manometer 0 ... 400 bar (1) 4200048601 pressure gauge 0 ... 5.800 PSI (1) Pos. 1.3
Pos. 2 Absperrventil mit Prüfzapfen 4200003235 shut-off valve with test plug Pos. 2
Pos. 3 Manometeranschluss G1/2 4200026691 pressure gauge G1/2 Pos. 3
Pos. 4 Hochdruckschlauch DN2, 1500mm (2) 4200027257 high pressure hose DN2, 1500mm (2) Pos. 4
Pos. 5 Schraubkupplung Anschluss G1/4 4200020887 screw coupling connection G1/4 Pos. 5
Pos. 6 Dichtkantenring 4200001211 canted gasket Pos. 6
Pos. 7 Befestigungswinkel 4200004991 bracket Pos. 7
Manometeranschluss komplett 0 ... 160 bar 4204002172 pressure gauge complete 0 ... 2.300 PSI
Manometeranschluss komplett 0 ... 250 bar 4202016090 pressure gauge complete 0 ... 3.600 PSI
Manometeranschluss komplett 0 ... 400 bar 4200051195 pressure gauge complete 0 ... 5.800 PSI(1) mit CE-Kennzeichnung gemäß DGRL 97/23/EG(2) andere Schlauchlängen auf Anfrage
(1) with CE-marking acc. to PED 97/23/EC (2) other hose lengths are available upon reuqest
ca. 2
00
ca. 77
10
30
2 x Ø 9 8
100
70
Ø 100
1
2, 6
37
4
5
Anschluss G 1/4zum Kolbenspeicherconnection G1/4to accumulator
Prüfanschluss M20 x 1,5
test connection M20 x 1,5
Prüfanschlusstest connection (M20 x 1,5)
Schlauchanschlusshose connection
nschlussonnectionx 1,5)
BSD MANOMETERANSCHLUSS
ÖLSEITE
42
Description:
The manometer connection on the oil-side serves to measure the oil-side pressure of the BSD piston accu-mulators and the piston accumulator units. The shut-off valve (Pos. 2) also includes a test connection.
BSD PRESSURE GAUGE
FOR OIL-SIDE
BOLE
NZ
& SC
HÄ
FER
40 1.2.2 BSD KOLBENSPEICHERZUBEHÖR 01-2010 1.2.2 BSD PISTON ACCUMULATOR ACCESSORIES 01-2010
BSD ELEKTRONISCHER 2-FACH
DRUCKSCHALTER
Beschreibung:
Elektronischer Druckschalter für Drucküberwa-chungen mit innenliegender oder frontbündiger Edelstahlmembran, Digitalanzeige, 2 Schaltaus-gängen und 1 Analogausgang, Kennlinienabwei-chung 0,5 % v. M. E.
Merkmale:
Alphanumerische 4-stellige Dot-Matrixan-zeige, mikroprozessorgesteuert, selbstüber-wachend mit Fehlerausgang, skalierbarer Ana-logausgang. Alle Parameter programmierbar über Folientastatur, einstellbare Tastatur-sperre, verschiedene Berechtigungsebenen, robuste Edelstahlausführung.
* Steckerform bei Bestellung mit angeben * please define plug design in your purchase order
4 31 2
5 SP2
SP1
1
5
4
2
3
+ Ub
0 V4... 20 mA
G1/4
120
Ø 32
SW22
12ca
. 48
ca. 3
5
Stecker 5- poligplug 5- pin
Steckerform * / plug design *
A B
Ø19 Weichdichtung resilient seal
(DIN 17530-803B)
AusführungDesign Pin 1 Pin 2 Pin 3 Pin 4 Pin 5
2 Schaltausgänge und 1 Analogausgang2 switching outputs and 1 analog output
+Ub 18 ... 32 V DC
analog 4 ... 20 mA
0 ... 10 V DC0 V SP1
0,5 A maxSP2
0,5 A max
Description:
Electronic pressure switch for pressure control with internal or flush stainless steel diaphragm, digital display, 2 switching outputs and 1 analog output, linearity error 0.5 % f. s.
Features:
Alphanumeric 4-digit dot-matrix display, microprocessor controlled, self-monitoring with error display, scalable analog output. All parameters are programmable by keypad. Adjustable keypad lock, various access levels, and solid stainless steel construction.
P
ISP1 SP2
BSD ELECTRONIC DUAL
PRESSURE SWITCH
45
BOLE
NZ
& SC
HÄ
FER
1.2.2 BSD KOLBENSPEICHERZUBEHÖR 01-2010 1.2.2 BSD PISTON ACCUMULATOR ACCESSORIES 01-2010 41
Technische Daten / Artikel-Nr. Technical data / Part-no.
Prozess- Anschluss G 1/4 (1) process connection
Sensorelement Piezoresistive Siliziummesszelle
piezoresistive silicon measuring cell
sensor element
Werkstoff medienberührte TeileElektronikgehäuseDichtungen
Edelstahl (1.4301)Edelstahl (1.4571)
FKM
stainless steel (1.4301)stainless steel (1.4571)
FKM
materialswetted partselectronic housingseals
Schutzart IP 67 mit PGIP65 mit Stecker
IP67 with PGIP65 with plug
system of protection
Gewicht ca. 350g weight
Messbereiche 0 .... 400 bar (2) effective range
Kennlinienabweichung 0,5% v.M.E. 25°C characteristic deviation
MesswerterfassungAufl ösungAbtastrate
12 Bit (4096 Schritte je Messspanne)100/s
A/D converterresolutionscanning rate
Elektrischer Anschluss Stecker M12 x 1 (3) / plug M12 x 1 (3) electrical connection
Temperaturbereich –10°C …. +70°C temperature range
Temperatureinfl uss ± 0,2% v. M. E. / 10K temperature influence
Kompensierter Bereich –10°C …. +70°C compensation range
Versorgungsspannung 18 – 32 V DC Supply voltage
DigitalanzeigeAnzeigebereichAnzeigerateDämpfungHelligkeitFehleranzeige
4 stellige Dot-Matrix-Anz.-999 ... +999
5/s'0,0 ... 9,9s einstellbar
20 ... 100% einstellbarLED rot und als Klartext
4 digit dot matrix display-999 ... +999
5/s'0,0 ... 9,9s adjustable
20 ... 100% adjustableLED red and
alphanumeric display
digital displaydisplay rangedisplay ratedelaybrightnesserror display
Stromaufnahme ca. 40mAbei Ub = 24 V DC
(ohne Last)
approx. 40 mA at Ub = 24 V DC (without load)
power consumption
AnalogausgangStromausgangBürdeBürdeneinfl ussSpannungsausgangBelastungEinstellbereich
4 ... 20 mAmax. RI = (Ub-12 V)/20 mA RI = 600 Ohm Ub = 24 V DC
0,3% / 100 Ohm0 ... 10 V DCmax. 10 mA
25% ... 100% v. M. E.
analog outputcurrent outputloadload infl uencevoltage outputratingadjustment range
Transistor Schaltausgänge PNPSchaltfunktion
EinstellbereichSchaltfrequenz
VerzögerungszeitAnzeige
Schließer/Öff ner/Standard/ Fenstertechnik und Diagnose-
funktion einstellbar0% ... 125% v. M. E.
max. 100 Hzmax. 500 mA,
kurzschlussfest0,0 ... 9,9 s einstellbar
LED green
normally open/closed/standard/window mode and diagnosis function adjustable
0% ... 125% v. M. E.max. 100 Hz
max. 500 mA, short-circuit proof
0,0 ... 9,9 s adjustableLED green
transistor switching outputsswitching function
adjustment functionswitching frequency
delaydisplay
Anwendung Öl & Gas oil & gas applications
Zulassung GL, cULus: fi le no. E42816 approval
Kabel optional cable
Artikel.-Nr. 4204002602 Part-no.(1) andere Anschlussgewinde auf Anfrage(2) andere Druckbereiche auf Anfrage(3) Steckerform bei Bestellung mit angeben
(1) other thread connection are available upon reuqest (2) other pressure levels are available upon reuqest (3) please define plug design in your purchase order
BOLE
NZ
& SC
HÄ
FER
42 1.2.2 BSD KOLBENSPEICHERZUBEHÖR 01-2010 1.2.2 BSD PISTON ACCUMULATOR ACCESSORIES 01-2010
BSD MECHANISCHER 2-FACH
DRUCKSCHALTER
Beschreibung:
Mechanischer 1fach-/2fach Druckschalter. Wiederholgenauigkeit ±1,0 % bei kons-tanter Temperatur.
Merkmale:
Bourdon-Rohr-Druckschalter, Schalt-punkt während des Betriebes mit entspre-chendem Referenzgerät einstellbar, alle mediumberührende Teile sind verschweißt. Unmittelbares schalten, hohe Genauigkeit.
Technische Daten / Artikel-Nr. Technical data / Part-no.
Typ * max. 250 bar max. 400 bar type *
Einstellbereich 13,7 bar ... 217 bar 22,4 bar ... 325 bar adjustment range
Wiederholgenauigkeit ±1% bei konstanter Temp. / ±1% at constant temp. repeat ability
Temperaturbereich -40°C bis +75°C temperature area
Schalthäufi gkeit max. 20/min switching rate
Anwendung Öl & Gas oil & gas applications
Prozessanschluss 1/4" NPT process connection
Elektrischer Anschluss Interne Klemmleiste (0,5 ... 2,5 mm2)
internal terminal strip(0,5 ... 2,5 mm2)
electrical connection
Schutzart IP65 system of protection
Gehäuse Aluminium eloxiert / aluminium anodized housing
Gewicht 1,2 kg weight
Kabel optional cable
Artikel.-Nr. 4204005046 4204014512 part-no.
*andere Druckstufen auf Anfrage *other pressure levels are available upon reuqest
Kabelverschraubung PG 13,5(Klemmbereich Ø7 ... 12mm)cable glad PG 13,5(cable diameter Ø7 ... 12)
112
149
133
3120
5620
190
Einstellschrauben SW 10 seitlich
adjusting screwslateral SW 10
Prozessschluss 1/4“ NPT IGprocess connection 1/4“ NPTemale thread
1
2
NC NOC
NC NOC
9
Stromkreis 1power circuit 1
Stromkreis 2power circuit 2
C = Lila / purple C = braun / brown
NC = blau / blue NC = orange / orange
NO = rot / red NO = schwarz / black
BSD MECHANIC DUAL
PRESSURE SWITCH
Description:
Mechanical single/dual pressure switchRepeatability ±1.0 % at constant temperature
Features:
Bourdon tube pressure switch, set points are adjustable during opera-tion by use of corresponding reference equipment. All wetted parts are welded. Direct switching and high accuracy.
44
BOLE
NZ
& SC
HÄ
FER
1.2.2 BSD KOLBENSPEICHERZUBEHÖR 01-2010 1.2.2 BSD PISTON ACCUMULATOR ACCESSORIES 01-2010 43
Beschreibung:
Elektronischer Druckaufnehmer für Gas / Hydraulik-einsatz, mit innenliegender Edelstahlmembrane, Kennlinienabweichung 0,5% v. M. E..
Merkmale:
Robuste Edelstahlausführung, für erhöhte Anfor-derungen, Kompakte Bauweise.
Technische Daten / Artikel-Nr. Technical data / Part-no.
Prozessanschluss G 1/4 process connection
Sensorelement Piezoresistive Siliziummesszelle
piezoresistive silicon measuring cell sensor element
Werkstoff :medienberührte TeileElektronikgehäuseDichtungen
Edelstahl (1.4301)Edelstahl (1.4571)
FKM
stainless steel (1.4301)stainless steel (1.4571)
FKM
materialswetted partselectronic housingseals
Schutzart IP 67 mit PGIP65 mit Stecker
IP67 with PGIP65 with plug system of protection
Gewicht ca. 130g weightMessbereiche (1) 0 .... 400 bar measuring range (1)
Kennlinienabweichung ≤±0,5% v.M.E. ≤±0,5% f.s. linearity error:Elektrischer Anschluss (2) Stecker M12 x 1 plug M12 x 1 electrical connection (2)
Temperaturbereich –25°C …. +80°C temperature rangeTemperatureinfl uss ≤± 0,2% v. M. E. / 10K ≤±0,2% f.s / 10k. temperature infl uenceKompensierter Bereich –10°C …. +70°C compensation rangeVersorgungsspannung 8 – 30 V DC power supplyStromaufnahme max. 30mA power consumptionBürde ≤ (UB-8 V)/20mA loadAnsprechzeit ≤ 1 ms delayAnwendung Öl & Gas Oil & gas applicationsZulassung GL optional approvalKabel optional cableArtikel.-Nr. 4202018065 Part-no.(1) andere Druckbereiche auf Anfrage(2) Steckerform bei Bestellung mit angeben
(1) other pressure levels are available upon reuqest (2) please define plug design in your purchase order
G1/4
Ø 27
83,5
12ca
. 43,
5
SW 15
SW 19
ca. 2
5,5
Ø19
4 31 2
5
Stecker 5- poligplug 5- pin
Weichdichtungresilient seal
Steckerform * / plug design * (DIN 17530-803B)
A B
PI
Ausführung Pin 1 Pin 2 Pin 3...5 Design
Stromausgang (2-Leiter)
+ Versorgung+ supply
- Versorgung- supply -
current output4 ... 20 mA(2-wire)
BSD ELEKTRONISCHER
DRUCKAUFNEHMER
Description:
Electronic pressure transducer for gas / hydraulic applications, with internal stainless steel diaphragm, linearity error 0.5 % f. s.
Features:
Solid stainless steel construction for higher demands, compact design.
BSD ELECTRONIC PRESSURE
TRANSDUCER
43
BOLE
NZ
& SC
HÄ
FER
44 1.2.2 BSD KOLBENSPEICHERZUBEHÖR 01-2010 1.2.2 BSD PISTON ACCUMULATOR ACCESSORIES 01-2010
BSD DRUCKBEHÄLTER
BSD Druckbehälter dienen zum Speichern von Gasen und / oder Flüssigkeiten unter Druck. Sie werden primär als N2-Nachschaltbehälter für BSD Kolben-speicheranlagen eingesetzt. Sie können aber, nach individueller Prüfung, auch für andere Gase oder Flüssigkeiten verwendet werden.
Abnahme:
Alle Druckbehälter werden entsprechend ihrer Ver-wendung mit Stickstoff nach DGRL 97/23/EG, ASME, China SQL, GOST-Russland oder anderen Normen ausgelegt. Sie verfügen somit über alle notwen-digen Prüfungen, Zertifikate und Bauteil-Kenn-zeichnungen, die für den ordnungsgemäßen Einsatz erforderlich sind. Die einzelnen Druckbehälterzulas-sungen, sind der entsprechenden Komponentenbe-schreibung zu entnehmen.
Standard Anschlüsse:
Alle Druckbehälter beruhen in ihren Anschlüssen auf den nachfolgenden Normen:
DIN ISO 228 (andere Anschlüsse auf Anfrage)• SAE-Flansch-Anschlüsse SAE J518• Avit Flansch-Anschlüsse ISO 6164•
Oberflächen:
Die Druckbehälter werden in der Regel innen mit Schutzöl konserviert ausgeliefert. Außen sind die Druckbehälter grundiert und werden je nach Kun-denwunsch mit Decklack versehen. Sonderfarbauf-bauten, wie z. B. off-shore Lackierungen, auf Anfrage möglich.
Übersicht Druckbehälter
Druckbehälter bis 75 l ________________ 45
Groß-Druckbehälter bis 11.000 l ________ 46
Groß-Druckbehälter Grundausführung 220/350 bar ______ 47-50
Sonder-Druckbehälter geschweißt _____ 51
Sonder-Druckbehälter / Autoklaven ____ 52
Overview pressure vessels
Pressure vessel up to 75 l _____________ 45
Large-Pressure vessel up to 11.000 l ____ 46
Large-Pressure vessel basic version 220/350 bar __________ 47-50
Special Pressure vessel welded _________51
Special Pressure vessel / autoclaves __________ 52
BSD PRESSURE VESSELS
BSD pressure vessels serve to store gases and /or liquids under pressure. They are primarily used as N2-vessels switched in series for BSD Piston accu-mulator installations. After having been tested individually, they also can be used for storing other gases or liquids.
Inspection:
Due to their use together with nitrogen, all pressure vessels are designed according to the DGRL 97/23/EC / China SQL, GOST-Russia or other standard reg-ulations. As such, they have passed all mandatory tests, have been certified, and carry the component tags that are mandatory for their proper use. The individual pressure vessel approvals are stated in the description of the respective component.
Standard Connections:
The connections of all pressure vessels are designed according to the following standards:
DIN ISO 228 (Other connections are available • upon request) SAE flange ports J518 • Avit Flange connections ISO 6164 •
Surfaces:
Normally, the pressure vessels are delivered with a layer of protective oil on the inside. On the outside, the pressure vessels are primed, and a topcoat is applied upon customer request. Special color paint-ings, such as offshore coatings, are also available.
BOLE
NZ
& SC
HÄ
FER
1.2.2 BSD KOLBENSPEICHERZUBEHÖR 01-2010 1.2.2 BSD PISTON ACCUMULATOR ACCESSORIES 01-2010 45
BSD DRUCKBEHÄLTER BIS 75 L
Beschreibung
Druckbehälter aus nahtlosen Stahlrohren, beider-seits halbrund geschmiedet, innen gestrahlt (SIS BSa 2 1/2) und mit Schutzöl konserviert. Außen gestrahlt (SIS BSa 2 1/2) und mit 2-Komponenten EP-Grundierung RAL 1001 grun-diert. Öffnungen für den Versand verschlossen.
Typ 1 / type 1
Technische Daten / Artikel-Nr. Technical data / Part-no.
Inhalt (l)capacity (l)
Betriebsdruckworking pressure
Abnahme (1)
acceptance (1)
wor
king
tem
-pe
ratu
re ra
nge
wor
king
m
ediu
m
Typ type
Anschlussconnection
L(mm)
Ø B(mm)
Ge-wicht
weight
Artikel-Nr.part-No.
A B35 290 bar / 4210 psi 50, 534, 520 2 G1 1/2 G 3/4 1280 219 75 420201879935 276 bar / 4000 psi 15 2 G1 1/2 G 3/4 1330 219 89 4202018355
-20.
..+80
°C
Stic
ksto
ff (2
)
nitr
ogen
(2)50 220 bar / 3200 psi 50, 534, 520 1 G 1 G 3/4 1500 229 68 4204008255
50 220 bar / 3200 psi 30 1 G 1 1/2 G 3/4 1730 229 154 4204009437
50 360 bar / 5230 psi 50, 534, 520 1 G 3/4 G 3/4 1590 229 98 420201880250 290 bar / 4210 psi 50, 534, 520 2 G1 1/2 G 3/4 1780 219 100 420201880050 276 bar / 4000 psi 15
Betr
iebs
tem
pe-
ratu
rber
eich
Betr
iebs
med
ium 2 G1 1/2 G 3/4 1835 219 120 4202018357
50 345 bar / 5000 psi 15 1 G 3/4 G 3/4 1730 228 130 420005829150 220 bar / 3200 psi 15 1 G 1 G 3/4 1590 229 98 420401026275 220 bar / 3200 psi 15 1 G 1 G 3/4 2280 229 133 420401026875 360 bar / 5230 psi 50, 534 1 G 1 G 3/4 2280 229 133 4202018805
Abnahmevorschrift Code acceptance regulation
ASME:DGRL 97/23/EG:
GOST (Russland):SEL (China):
M.E.T.I. HPGSL (JIS) Japan:
1550
52053430
ASME:PED 97/23/EC:GOST (Russia):
SEL (China):M.E.T.I. HPGSL (JIS) Japan:
(1) andere Druckbehälterabnahmen auf Anfrage (2) verwendung für andere Fluide auf Anfrage
(1) other pressure vessels acceptance are available upon reuqest (2) usage for other fluids are available upon reuqest
B ±1%
Ø42
G3/4
G1Ø47
Rz25
L ±
25
min
19
min
19 Rz25
A
B
A1
A3
Ø42
G3/4
min
19
B
Rz25
G1 1/2
Ø62
min
25
A2
Rz25
L ±
25
B ±1%
30
Ø42
G3/4
Ø75Ø68
G1 1/2Rz6.3
36
Rz25
A
B
A
B
BSD PRESSURE VESSEL UP TO 75 L
Description
Pressure vessels made of seamless steel tubes, forged to a half-round shape on both sides.Blasted inside surface, (SIS BSa 2 1/2) sealed with protective oil
for conservation. Blasted outside surface (SIS BSa 2 1/2) primed with a 2-component epoxy resin RAL 1001. Openings are closed for delivery purposes.
Typ 2 / type 2
41
BOLE
NZ
& SC
HÄ
FER
46 1.2.2 BSD KOLBENSPEICHERZUBEHÖR 01-2010 1.2.2 BSD PISTON ACCUMULATOR ACCESSORIES 01-2010
BSD GROSS-DRUCKBEHÄLTER
BIS 11.000 L
Beschreibung:
Sie dienen der Speicherung großer Stickstoffvo-lumen, als alternative zu mehreren kleinen Druck-behältern. Sie sind komplett gestrahlt (SIS BSa 2 1/2) sowie innen mit Schutzöl konserviert. Die Farbbe-handlung außen erfolgt nach Kundenwunsch. Die Behälter können horizontal (Abb. 1) und vertikal (Abb. 2) einge-setzt werden.
Besondere Eigenschaften
hohe Wirtschaftlichkeit• Stickstoff fast unbegrenzt speicherbar• ermöglichen große hydraulische Leistungen• sehr montagefreundlich•
Abb. 1 / fi g. 1
Technische Daten Technical data
Betriebsüberdruck (PN) 220 / 350 bar (1) working pressure (PN)Betriebstemperaturbereich -25...+50°C working temperature rangeBetriebsmedium Stickstoff (2) / nitrogen (2) working mediumVolumen pro Behälter max. 11.000 l volume per vesselAbnahmevorschrift siehe Typenschlüssel Seite 50 / see type code page 50 acceptance regulation(1) andere Drücke auf Anfrage(2) andere Medien auf Anfrage
(1) other pressures are available upon reuqest (2) other mediums are available upon reuqest
Description:
BSD large-pressure vessels serve to store large nitrogen volumes instead of using several smaller pressure ves-sels. They are completely blasted (SIS BSa 2 1/2) as well as sealed on the inside with protective grease for con-
servation. The outside is colored according to the customer’s request. The vessels can be employed horizontally (fi g. 1) or ver-tically (fi g. 2).
Special features
high cost effectiveness• almost unlimited storage of nitrogen• high degree of hydraulic power • simple installation•
Abb. 2 / fig. 2
BSD LARGE-PRESSURE VESSEL
UP TO 11.000 L
41
BOLE
NZ
& SC
HÄ
FER
1.2.2 BSD KOLBENSPEICHERZUBEHÖR 01-2010 1.2.2 BSD PISTON ACCUMULATOR ACCESSORIES 01-2010 47
Ø B
L1
Ø 37
5
Ø 3
75
Ø15
0
Ø50
L1
Ø B
Standard Anschluss G 3/4
für BSD Entlüfterstutzen
Standard connection G3/4
for BSD bleed valve
BSD N2 GROSS-DRUCKBEHÄLTER
GRUNDAUSFÜHRUNG 220/350 BAR
Typ 1
Typ 2
Beispiel Anschlusstypen / Example type connections
axialer Flanschanschluss axialer Gewindeanschluss radialer Gewindeanschluss
axial flange connection axial thread connection radial thread connection
* Anschlusstyp sowie Anschlussbohrung bei Bestellung mit angeben.
* please quote connection type as well as bore connection in your purchase order
Standard
Anschluss
G 3/4
für BSD Ent-
lüfterstutzen
Standard
connection
G3/4 for BSD
bleed valve
Beispiel Anschlusstypen / Example type connections
axialer Flanschanschluss axialer Gewindeanschluss radialer Gewindeanschluss radialer Flanschanschluss
axial flange connection axial thread connection radial thread connection radial flange connection
* Anschlusstyp sowie Anschlussbohrung bei Bestellung mit angeben.
* please quote connection type as well as bore connection in your purchase order
BSD LARGE-PRESSURE VESSEL
BASIC VERSION 220/350 BAR
Type 1
Type 2
41
BOLE
NZ
& SC
HÄ
FER
48 1.2.2 BSD KOLBENSPEICHERZUBEHÖR 01-2010 1.2.2 BSD PISTON ACCUMULATOR ACCESSORIES 01-2010
Auslegung nach DGRL 97/23/EGAccording to PED 97/23/EC
Volumen Ø B (mm) (1) L1 (mm) (1)
Gewicht (kg) (1) Typ (2)
volume weight (kg) (1) type (2)
250 l355 3350 600 1650 1090 404 1
500 l 650 1970 752 1750 l 650 2850 1100 1
1000 l 650 3730 1448 11250 l 650 4610 1796 1
1500 l650 5600 2144 1800 3820 2990 1
1750 l650 6480 2492 1800 4400 2650 1
2000 l650 7360 2840 1800 4980 2990 1950 3710 3335 2
2250 l650 8240 3188 1800 5560 3330 1950 4120 3670 2
2500 l650 9120 3536 1800 6140 3670 1950 4530 4005 2
2750 l650 10000 3884 1800 6720 4010 1950 4940 4340 2
3000 l800 7300 4350 1950 5350 4675 2
1350 3050 4900 2
3250 l800 7880 4690 1950 5760 5010 2
1350 3250 5230 2
3500 l800 8460 5030 1950 6170 5345 2
1350 3450 5560 2
3750 l800 9040 5370 1950 6580 5680 2
1350 3650 5890 2
4000 l800 9620 5710 1950 6990 6015 2
1350 3850 6220 2
4250 l950 7400 6350 2
1350 4050 6550 2
Auslegung nach DGRL 97/23/EGAccording to PED 97/23/EC
Volumen Ø B (mm) (1) L1 (mm) (1)
Gewicht (kg) (1) Typ (2)
volume weight (kg) (1) type (2)
4500 l950 7810 6685 2
1350 4250 6880 2
4750 l950 8220 7020 2
1350 4450 7210 2
5000 l950 8630 7355 2
1350 4650 7540 2
5250 l950 9040 7690 2
1350 4850 7870 2
5500 l950 9450 8025 2
1350 5050 8200 2
5750 l950 9860 8360 2
1350 5250 8530 2
6000 l950 10270 8695 2
1350 5450 8860 2
6250 1350 5650 9190 2
6500 1350 5850 9520 2
6750 1350 6050 9850 2
7000 1350 6250 10180 2
7250 1350 6450 10510 2
7500 1350 6650 10840 2
7750 1350 6850 11170 2
8000 1350 7050 11500 2
8250 1350 7250 11830 2
8500 1350 7450 12160 2
8750 1350 7650 12490 2
9000 1350 7850 12820 2
9250 1350 8050 13150 2
9500 1350 8250 13480 2
9750 1350 8450 13810 2
10000 1350 8650 14140 2
10250 1350 8850 14470 2
10500 1350 9050 14800 2
10750 1350 9250 15130 2
11000 1350 9450 15460 2
BSD N2 GROSS-DRUCKBEHÄLTER
BIS 220 BAR
BSD LARGE-PRESSURE VESSEL
BIS 220 BAR
(1) Maß- und Gewichtsänderungen vorbehalten.(2) In Abhängigkeit der Anschlussbohrungen können
die Typen bezogenen Flanschabmessungen abweichen.
(1) Dimension and weight are subject to change.(2) Depending on the bore connection,
the fl ange type dimension may diff er.
41
BOLE
NZ
& SC
HÄ
FER
1.2.2 BSD KOLBENSPEICHERZUBEHÖR 01-2010 1.2.2 BSD PISTON ACCUMULATOR ACCESSORIES 01-2010 49
Auslegung nach DGRL 97/23/EGAccording to PED 97/23/EC
Volumen Ø B (mm) (1) L1 (mm) (1)
Gewicht (kg) (1) Typ (2)
volume weight (kg) (1) type (2)
250 l355 3550 900 1630 1200 1052 1
500 l 630 2200 1576 1750 l 630 3200 2100 1
1000 l 630 4200 2624 21250 l 630 5200 3148 2
1500 l630 6200 3672 2788 4300 4495 2
1750 l630 7200 4196 2788 4950 4940 2
2000 l630 8200 4720 2788 5600 5385 2
1000 3710 5562 2
2250 l630 9200 5244 2788 6250 5830 2
1000 4120 6144 2
2500 l630 10200 5768 2788 6900 6410 2
1000 4530 6726 2
2750 l788 7550 6855 2
1000 4940 7308 21350 3080 8092 2
3000 l788 8200 7300 2
1000 5350 7890 21350 3310 8714 2
3250 l788 8850 7745 2
1000 5760 8472 21350 3540 9336 2
3500 l788 9500 8190 2
1000 6170 9054 21350 3770 9958 2
3750 l788 10150 8635 2
1000 6580 9636 21350 4000 10580 2
4000 l1000 6990 10218 21350 4230 11202 2
4250 l1000 7400 10800 21350 4460 11824 2
Auslegung nach DGRL 97/23/EGAccording to PED 97/23/EC
Volumen Ø B (mm) (1) L1 (mm) (1)
Gewicht (kg) (1) Typ (2)
volume weight (kg) (1) type (2)
4500 l1000 7810 11382 21350 4690 12446 2
4750 l1000 8220 11964 21350 4920 13068 2
5000 l1000 8630 12546 21350 5150 13690 2
5250 l1000 9040 13128 21350 5380 14312 2
5500 l1000 9450 13710 21350 5610 14934 2
5750 l1000 9860 14292 21350 5840 15556 2
6000 l1000 10270 14874 21350 6070 16178 2
6250 l 1350 6300 16800 2
6500 l 1350 6530 17422 2
6750 l 1350 6760 18044 2
7000 l 1350 6990 18666 2
7250 l 1350 7220 19288 2
7500 l 1350 7450 19910 2
7750 l 1350 7680 20532 2
8000 l 1350 7910 21154 2
8250 l 1350 8140 21776 2
8500 l 1350 8370 22398 2
8750 l 1350 8600 23020 2
9000 l 1350 8830 23642 2
9250 l 1350 9060 24264 2
9500 l 1350 9290 24886 2
9750 l 1350 9520 25508 2
10000 l 1350 9750 26130 2
10250 l 1350 9980 26752 2
10500 l 1350 10210 27374 2
10750 l 1350 10440 27996 2
11000 l 1350 10670 28618 2
1) Maß- und Gewichtsänderungen vorbehalten.(2) In Abhängigkeit der Anschlussbohrungen können
die Typen bezogenen Flanschabmessungen abweichen.
(1) Dimension and weight are subject to change.(2) Depending on the bore connection,
the fl ange type dimension may diff er.
BSD N2 GROSS-DRUCKBEHÄLTER
BIS 350 BAR
BSD LARGE-PRESSURE VESSEL
BIS 350 BAR
41
BOLE
NZ
& SC
HÄ
FER
50 1.2.2 BSD KOLBENSPEICHERZUBEHÖR 01-2010 1.2.2 BSD PISTON ACCUMULATOR ACCESSORIES 01-2010
Beispiel:
Bestellbezeichnung:Typ: GDBN2-Inhalt: 1000 LiterDruck: 350 barAußen-Ø: 650 mmOrientierung: horizontal (H)Abnahmevorschrift: DGRL 97/23/EGAnschlüsse: (Anschlussbeschreibung)
GDB - 1000- 350 - 650 - H - 50 - Text
GD
B -... - ... - ... - ... - ... - ...
Typ
N2-Inhalt 250 ... 11000 L
Druckstufen 220 / 350 bar (1)
Außen-ø 355, 630, 650, 788, 800,
950, 1000, 1350 mm
Orientierung horizontal (H) vertikal (V)
Abnahmevorschrift
ASME =DGRL 97/23/EG =
GOST (Russland) =SEL (China) =
DNV (Det Norske Veritas) =M.E.T.I. HPGSL Japan =
1550
520534509
30
Anschlüsse bitte im Klartext spezifizierenz. B. SAE 1 1/2" 6000 psi, radial
(1) andere auf Anfrage (1) others on request
TYPENSCHLÜSSEL
GROSS-DRUCKBEHÄLTER (GDB)
Bestellbezeichnung Order designation
TYPE CODE
LARGE-PRESSURE VESSEL (GDB)
Type
250 ... 11000 L N2-capacity
220 / 350 bar (1) pressure rating
355, 630, 650, 788, 800, 950, 1000, 1350 mm
external-ø
(H) horizontal(V) vertical orientation
155052053450930
= ASME= PED 97/23/EC= GOST (Russia)= SEL (China)= DNV (Det Norske Veritas)= M.E.T.I. HPGSL Japan
acceptance regulation
please specify details of specifi -cation, e. g. SAE 1 1/2" 6000 psi, radial, (in your purchase order)
connections
Example:
Order designation:Type: GDBN2-capacity: 1000 LiterPressure: 350 barExternal-ø: 650 mmOrientation: horizontal (H)Acceptance regulation: PED 97/23/ECConnections: (specify connections)
GDB - 1000- 350 - 650 - H - 50 - text
BOLE
NZ
& SC
HÄ
FER
1.2.2 BSD KOLBENSPEICHERZUBEHÖR 01-2010 1.2.2 BSD PISTON ACCUMULATOR ACCESSORIES 01-2010 51
BSD SONDER-DRUCKBEHÄLTER
GESCHWEISST
Beschreibung:
BSD Sonder-Druckbehälter geschweisst orientieren sich konstruktiv an den BSD Groß-Druckbehälter Baureihen. Sie sind geeignet für die Aufnahme von großen Volumen sowie für spezi-elle Medien, wie Luft, Wasser ect.. Zu Prüf- und Wartungszwecken können die Behälter mit Revisionsöffnungen ausge-führt werden. Optional sind sie auch mit Füllstandsanzeige lieferbar.
Ausführungsbeispiel:
Volumen: 4000 l• Betriebsdruck: 63 bar• Betriebstemperatur: -10 ... +50°C• Gewicht: 3.490 kg• Betriebsmedium: Öl/Luft/Wasser•
SDBG
-... - ... -...
Typ
Volumen (1) 250 ... 11000 l
Druck (1) 0 ... 100 bar
Außen-ø (mm) (1) 1200, 1400 mm
im Bestelltext mit angeben:
Betriebsmedium •Betriebstemperaturbereich •
Abnahmevorschrift / Aufstellungsland •Druckschwankungsbreite / Lastwechsel •
Anschlüsse (ggf. Skizze hinzufügen) •
(1) andere auf Anfrage* zusätzliche Ausstattungen, z. B. Revisionsöffnung,
Füllstandsanzeige etc. auf Anfrage.
Typenschlüssel
Description:
In their construction BSD special-welded pressure vessels are oriented towards the production series of BSD‘s large pressure vessel. They are suitable
for accommodating large volumes and specific media, such as air, water etc. For testing and maintenance purposes these vessels can include a revision opening. Optionally, they are also avail-able with a level indicator.
Design example:
volume: 4000 l• working pressure: 63 bar• working temperature: -10 ... +50°C• weight: 3.490 kg• working medium: oil/air/water•
BSD SPECIAL PRESSURE VESSEL
WELDED
Type
250 ... 11000 l volume (1)
0 ... 100 bar set pressure (1)
1200, 1400 mm outside-ø (mm) (1)
specify by receipt of order:
working medium• working temperature range• acceptance regulation / country of final installation• fluctuation of pressure / cycle of stress• connections ( please add draft version if necesary)•
(1) other are available upon request* further equipment, e. g. revision opening, level indi-
cator etc. is available upon request.
Type code
41
BOLE
NZ
& SC
HÄ
FER
52 1.2.2 BSD KOLBENSPEICHERZUBEHÖR 01-2010 1.2.2 BSD PISTON ACCUMULATOR ACCESSORIES 01-2010
BSD SPEZIAL-DRUCKBEHÄLTER
GESCHRAUBT
Beschreibung:
BSD Spezial-Druckbehälter orientieren sich an den Kolbenspeicher Baureihen. Es sind Sonderlösungen für besonders hohe Drücke, hohe Druckschwan-kungsbreiten, verschiedenste Medien oder spezielle Materialien (Edelstahl).
Versuchsautoklavmit Schnellversch• lussseewasserbeständig • (Edelstahl)Volumen 40 l• Betriebsdruck 400 bar• Betriebstemperatur bis +200 °C• Schauglas möglich•
Versuchsautoklavmit autom. Versch• lussSeewasserbeständig (Edelstahl)• Volumen 25 l• Betriebsdruck 660 bar•
Resonatordämpft • Druckstoße in Hydrauliksystemenhohe Druckschwankungsbreite• Betriebsdruckbereich 0...460 bar, • dauerfest ausgelegtVolumen 200 l•
Ausführungsbeispiele:
SDB -... - ... -...
Typ
Volumen * 0 ... 900 l
Druck * 0 ... 1000 bar
Innen- ø (mm) * 60, 80, 100, 150, 180, 250, 360
im Bestelltext mit angeben:
Betriebsmedium •Betriebstemperaturbereich •
Abnahmevorschrift / Aufstellungsland •Druckschwankungsbreite / Lastwechsel •
Anschlüsse (ggf. Skizze hinzufügen) •
Typenschlüssel Type code
* andere auf Anfrage * other are available upon request
BSD SPECIAL PRESSURE VESSEL
SCREWED
Description:
BSD special pressure vessels follow the design of the piston accumulator production series. They are intended as special solutions for extremely high types of pressure, pressure fluctuation, and different media or particular materials (stainless steel).
Examples of design:
Test autoclavequick-release fastener• seawater resistant• (stainless steel)volume 40 l• working pressure 400 bar• working temperature up to +200 °C• inspection glass available•
Test autoclavewith autom. closer• seawater resistant (stainless steel)• volume 25 l• working pressure 660 bar•
Resonatorabsorbs • pressure surge in hydro systemshigh pressure variations• working pressure range 0 ... 460 bar, • fatigue-enduring designvolume 200 l•
Type
0 ... 900 l volume *
0 ... 1000 bar set pressure *
60, 80, 100, 150, 180, 250, 360 inside- ø (mm) *
specify by receipt of order
working medium• working temperature range• acceptance regulation / country of final installation• fluctuation of pressure / cycle of stress• connections (please add draft version if necesary)•
BOLE
NZ
& SC
HÄ
FER
1.2.2 BSD KOLBENSPEICHERZUBEHÖR 01-2010 1.2.2 BSD PISTON ACCUMULATOR ACCESSORIES 01-2010 53
NOTIZEN NOTES
BOLE
NZ
& SC
HÄ
FER
54 1.2.2 BSD KOLBENSPEICHERZUBEHÖR 01-2010 1.2.2 BSD PISTON ACCUMULATOR ACCESSORIES 01-2010
MONTAGETECHNIK
Beschreibung
Die Befestigungsart eignet sich in erster Linie für den senkrechten Einbau der BSD Kolbenspeicher oder N2-Druckbehälter. Die Konsolen nehmen dabei die Gewichtskräfte des Kolbenspeichers auf. Es ist daher auf eine ausreichende Tragfähigkeit der Wand zu achten. Die Schellen fi xieren den Speicher in seiner Position. Unter bestimmten Bedin-gungen, in der Regel nur bei kleinen Spei-chern, können die Schellen auch Gewichts-kräfte aufnehmen, so dass auf eine Konsole verzichtet werden kann. Befestigungen für besondere Einbausituationen auf Anfrage.
Ausführungsbeispiele
Montagetechnik
Abb. 1 Kolbenspeicherbefestigung mit Konsole und Spannschelle. Abb. 2 Kol-benspeicherbefestigung mit Konsole und Rundstahlbügel.
Übersicht Montagetechnik
Druckbehälter Konsole _______________ 55
Kolbenspeicher Konsolen ____________ 55
Spannschellen für Kolbenspeicher _____ 56
Spannschellen für Druckbehälter ______ 56
Rundstahlbügel mit Rohrunterlage für Kolbenspeicher __________________ 57
Rundstahlbügel ohne Rohrunterlage für Druckbehälter ___________________ 57
BSD KONSOLEN
Beschreibung
Konsole zur Befestigung von Kolbenspeichern und Druckbehältern. Die Konsolen dienen zur Aufnahme von Gewichtskräften und werden an eine Wand oder ein Gestell geschraubt. Bei Kolbenspeichern sind die Kon-solen off en und bei Druckbehältern geschlossen aus-geführt. Konsolen aus Stahlblech galvanisch verzinkt. Andere Werkstoff e und Abmessungen auf Anfrage.
Abb. 1fig. 1
Abb. 2fig. 2
Overview mounting technology
Pressure vessel brackets _____________ 55
Piston accumulator brackets __________ 55
Steel clamps for piston accumulators ___ 56
Steel clamps for pressure vessels ______ 56
U-bolt clamps with plastic pipe saddle for piston accumulators _________________ 57
U-bolt clamps without plastic pipe saddle for pressure vessels ____________________ 57
BSD BRACKETS
Description
Brackets for mounting piston accumulators and pres-sure vessels. The brackets serve to absorb the weight and are screwed onto a wall or a frame. For mounting piston accumulators the brackets have an open design, for mounting pressure vessel they are closed in design. Brackets are made of galvanized steel sheets. Other materials and dimensions are available upon request.
Description
This mounting method is mainly suitable for a vertical installation of the BSD piston accumulators or N2 – pressure vessels. The brackets absorb the weight of the accumulators. Therefore, suffi cient stability of the wall
is a key issue. The clamps fi x the accu-mulator in its position. Under certain conditions, especially when small units are installed, the clamps can absorb weight, too. In this case using a panel is not necessary. Fixing elements for special installation are available upon request.
Examples of design for
mounting technology
Fig. 1 Piston Accumulator with brackets and steel clamps. Fig. 2 Piston accumulator with brackets and u-bolt clamps.
MOUNTING TECHNOLOGY
BOLE
NZ
& SC
HÄ
FER
1.2.2 BSD KOLBENSPEICHERZUBEHÖR 01-2010 1.2.2 BSD PISTON ACCUMULATOR ACCESSORIES 01-2010 55
BSD Druckbehälter Konsole
Gummistützring für Druckbehälter ... Rubber support ring for pressure vessel ...
Typ A B B1 B2 B3 B4 B5 D1 D2 D3 H1 Artikel Nr. / Part-no.
... 32-18 260 225 123 100 35 40 15 159 14 200 200 4200040701
BSD Kolbenspeicher Konsolen
Konsole für KAK/AK ... Brackets for KAK/AK ...
Typ A B B1 B2 B3 B4 C D1 D2 H H1 Artikel Nr. / Part-no.... 220 / 375-10 140 100 70 80 30 30 70 9 13 90 100 4200058231
... 800-10 180 125 92 100 40 40 70 9 17 90 120 4200058232... 220 / 350-15 200 130 97 100 40 40 100 13 17 125 140 4204014559
... 200 / 280 / 375-18 240 150 111 100 40 40 140 13 17 160 180 4200058234... 600-18 280 175 133 160 40 40 140 18 22 220 220 4200058237
... 220 / 350-25 320 200 153 160 60 80 220 13 22 240 220 4200058238
... 220 / 350-36 440 260 212 240 60 120 290 18 26 330 300 4200058240
Konsole für UAK … Brackets for UAK ...
Typ A B B1 B2 B3 B4 C D1 D2 H H1 Artikel Nr. / Part-no.... 32 / 55-18 240 150 111 100 40 40 140 13 17 160 180 4200058234... 32 / 51-25 320 200 153 160 60 80 220 13 22 240 220 4200058238
... 32-36 440 260 212 240 60 120 290 18 26 330 300 4200058240
... 51-36 440 260 212 240 60 120 290 18 26 330 300 4200058242
H1A
Ø D2
B2 B5
B4B3B
B1
Ø D
1 Ø D
3
AHC
D1
Ø D2H
1
B1
B
B2
B4 B3
BSD piston accumulator brackets
BSD pressure vessel bracket
41
BOLE
NZ
& SC
HÄ
FER
56 1.2.2 BSD KOLBENSPEICHERZUBEHÖR 01-2010 1.2.2 BSD PISTON ACCUMULATOR ACCESSORIES 01-2010
Beschreibung:
Halterungsschellen mit Gummiprofi l für die Befes-tigung von Kolbenspeichern und Druckbehältern. Durch die konstruktive Gestaltung der Schellen können Gewichtskräfte nur in geringem Umfang über-tragen werden. Sie werden mit Schrauben Ø 8 an einer Wand oder auf einem Gestell befestigt. Schellenkörper aus Stahl komplett verzinkt, Gummiprofi l aus EPDM. Andere Werkstoff e und Abmessungen auf Anfrage.
BSD Spannschellen zweiteilig
BSD two-part steel clamps
Abb. 1 / fig. 1
Spannschellen für KAK / AK… Steel clamps for KAK / AK...
Typ / type Abb. / fi g. D H L±1 L1 L2 B Artikel Nr. / Part-no.... 220 / 375-06 2 70-80 ca. 56 114 155 - 40 4204014667... 220 / 375-08 2 100 ca. 68 114 155 - 40 4204014668... 220 / 375-10 1 115-125 ca. 71 100 194 195 30 4204002763... 220 / 350-15 1 170-180 ca. 101 148 194 248 30 4204014669
... 200 / 280 / 375-18 1 210-222 ca. 123 216 254 289 30 4202017360... 220-25 1 289 ca. 154 280 336 349 30 4200002978... 350-25 1 308 ca. 163 280 336 368 30 4200002979... 220-36 1 406 ca. 213 384 433 475 30 4200004237... 350-36 1 428 ca. 219 384 457 487 30 4200004540
Spannschellen für UAK … Steel clamps for UAK ...
Typ/type Abb. / fi g. D H L±1 L1 L2 B Artikel Nr. / Part-no.... 32 / 55-18 1 217 ca. 123 216 254 289 30 4202017360
... 32-25 1 289 ca. 154 280 336 349 30 4200002978
... 51-25 1 308 ca. 163 280 336 368 30 4200002979
... 32-36 1 406 ca. 213 384 433 475 30 4200004237
... 51-36 1 428 ca. 219 384 457 487 30 4200004540
Spannschellen für DB Ø227mm-238mm Steel clamp for DB from Ø227mm - 238mm
Typ Abb. / fi g. D H L±1 L1 B Artikel Nr. / Part No.DB 2 Ø227-238 ca. 132,5 199 246 65 4204001870
13
L2
L1
L ±1
Ø D
9
H
3
M12 x 70/100 DIN EN ISO 4017M12 DIN EN ISO 4032 B
BSD SPANNSCHELLEN
Description:
Mounting clamps with rubber profi le for the installa-tion of piston accumulators and pressure vessel. Due to the constructive design of the clamps, weight-forces can only be transmitted to a limited extent. They are fi xed with screws Ø 8 onto a wall or a frame. The body of the clamps is made of completely galvanized steel; the rubber profi le is made of EPDM. Other materials and dimensions are available upon request.
BSD Spannschellen einteilig
BSD one-part steel clamps
Abb. 2 / fig. 2
HB
9
L1
L±1
ØD
35
BSD STEEL CLAMPS
42
BOLE
NZ
& SC
HÄ
FER
1.2.2 BSD KOLBENSPEICHERZUBEHÖR 01-2010 1.2.2 BSD PISTON ACCUMULATOR ACCESSORIES 01-2010 57
Beschreibung:
Rundstahlbügel D16 (Pos. 1) mit Kunststoff -Rohrunter-lage (Pos. 2) für Kolbenspeicher sowie für Druckbe-hälter ohne Kunststoff -Rohrunterlage. Rundstahlbügel für Druckbehälter werden mit 2 bzw. für Kolbenspei-cher mit 4 Muttern und Scheiben (Pos. 3, 4) geliefert. Bügel, Muttern und Scheiben aus Normalstahl galva-nisch verzinkt. Andere Werkstoff e und Abmessungen auf Anfrage.
mit Rohrunterlage für Kolbenspeicher KAK / AK … with plastic pipe saddle for piston accu. KAK / AK ...
Typ D1 +2 T H1 +2 H2 +2 L +2 L1 L2 D2 B Artikel Nr. / Part-no.... 220 / 375-10 125 max.16 178,5 100 141 40 75 15,5 70 4204011128... 220 / 350-15 182 max.16 242 135 198 90 140 25,5 75 4204014558
... 200 / 280 / 375-18 224 max.16 273 145 240 90 140 25,5 75 4204009698... 220-25 292 max.16 344 182 308 90 140 25,5 75 4204011861... 350-25 312 max.16 364 192 328 90 140 25,5 75 4204005783... 220-36 412 max.16 467 245 428 150 220 30,5 75 4200058118... 350-36 434 max.16 494 252 450 150 220 30,5 75 4204004144
mit Rohrunterlage für Kolbenspeicher UAK … with plastic pipe saddle for piston accu. UAK ...
Typ D1 T H1 +2 H2 +2 L +2 L1 L2 D2 B Artikel Nr. / Part-no.... 32 / 55-18 224 max.16 273 145 240 90 140 25,5 75 4204009698
... 32-25 292 max.16 344 182 308 90 140 25,5 75 4204011861
... 51-25 312 max.16 364 192 328 90 140 25,5 75 4204005783
... 32-36 412 max.16 467 245 428 150 220 30,5 75 4200058118
... 51-36 434 max.16 494 252 450 150 220 30,5 75 4204004144
ohne Rohrunterlage für Druckbehälter without plastic pipe saddle for pressure vessel
Typ D1 T H1 +2 H2 +2 L +2 Artikel Nr. / Part no.Ø 227-238 230 max. 100 365 234 246 4202012215Ø 227-238 230 max. 16 296 165 246 4204009993
H2
+2
H1
+2
L1L2
L +2
B
ØD1 +2
M16 3, 4
2
1
8
T
Ø D2
31,4
9
Description:
U-bolt clamps D16 (Pos. 1) with plastic pipe saddle (Pos. 2) for piston accumulators and for pressure vessels without plastic pipe saddle. U-bolt clamps for pressure vessel are supplied with 2 nuts and discs, alternatively with 4 nuts and discs for piston accumulators (Pos. 3, 4). Clamp, nuts and discs are made of galvanized normal steel. Other materials and dimensions are available upon request.
BSD RUNDSTAHLBÜGEL BSD U-BOLT CLAMPS
42
BOLE
NZ
& SC
HÄ
FER
1.2.2 BSD KOLBENSPEICHERZUBEHÖR 01-2010 1.2.2 BSD PISTON ACCUMULATOR ACCESSORIES 01-2010
BOLENZ & SCHÄFER GmbH
Lahnstraße 34D - 35216 Biedenkopf-Eckelshausen
Telefon: + 49 64 61 933 - 0
Fax: + 49 64 61 933 - 161
E-Mail: [email protected]
Internet www.bolenz-schaefer.de
BSD PARTNER WELTWEIT
Adressen unserer Partner im Aus-land sowie weiterführende Informa-tionen zu BOLENZ & SCHÄFER oder zu unseren Produkten finden Sie im Internet unter:
www.bolenz-schaefer.de
BSD PARTNER WORLDWIDE
Further information about BOLENZ & SCHÄFER, and about our products or contact adresses of our partners in other countries are available on our website:
www.bolenz-schaefer.de
NiederlandeNetherlands Norwegen
NorwayGroßbritannienGreat Britain
KanadaCanada
PolenPoland
FrankreichFrance
ÖsterreichAustria
SpanienSpain
SchweizSwiss
USAUSA
Tschech. Rep.Czech.Rep.
ChinaChina
JapanJapan
Süd-KoreaSouth-Korea
ItalienItaly
IranIran
UngarnHungary
ChileChile
IndienIndia
BulgarienBulgaria
Süd-AfrikaSouth-Africa
SingapurSingapore
TaiwanTaiwan
AustralienAustralia