Download - Dynasep Peach Depth Cartridge
-
5/21/2018 Dynasep Peach Depth Cartridge
1/4
P E R R Y E Q U I P M E N T C O R P O R AT I O
Series PCHG Gas Filtration Produ
USA Patent No. 5827430 and 5893856 (International Patents GE N G I N E E R E D F I L T R A T I O N T E C H N O L O G
-
5/21/2018 Dynasep Peach Depth Cartridge
2/4
The PEACH
Conical HelixStructureyields high flowand maximumefficiency.
THE PEACH
The PEACH consists of severallateral sections of PEM formed into aconical helix pattern. Each section
consists of multiple helicaly wrappedlayers. Through thermal bonding,
these spiral layers are applied toconform and overlap the previous
layer, forming a conethe conicalhelix structure. This structure resultsin a graded density pattern that yields
high contaminant loading, structuralstrength, maximum
efficiency, and excellent reproducibility.
GRADED DENSITY
Each layer of the PEACH filter
performs a particular function.While all layers are designed to a
specific micron rating, each lateralsection removes contaminants. The
outer layer typically removes thebulk solids. As contaminants move
through the depth of the cone,the filter densities increase to meetthe required micron rating. The
inner layers of the filter providestructural strength.
Peach Media 150XSEM Photo by Southwest Research Institute
PEACH FILTRATION TECHNOLO GY
A performance engineered cartridge
Predictable performance Performance assured from star t-up No unloading High dirt holding capacity No media migration
ENVIRONME NTAL FEATURES
100% synthetic Incinerable (CO2 + Water) Trace ash & no plastic residue Ease of disposal: crush, shred, chop, etc. Coreless, no metal parts
No fiberglass media
PECO ENGINEERED MEDIAPEM, specifically designed for filtrationcoalescing, is the key component in
the production of the PEACH gaselement.The PEM is designed with
an assigned micron rating andefficiency. Raw fibers of various
denier are weighed, blended andthermally bonded, then formed intoa compressed filter media sheet.
Various layers of PEM are then usedin the manufacture of the PEACH
gas element.
PECO ENGINEERED APPLIEDCONICAL HELIX TECHNOLOGYPEACH is the manufacturingprocess incorporating PEM to
form an element into a conicalhelix.This innovative patentedprocess makes possible a graded
density pattern which yieldsoutstanding filtration.
PEACH FILTRATIO N TECHNOLOGYgives you consistent, predictable performance,high contaminant loading, and high efficiency.
PEACH - an innovative gas filtering/coalescing technology.
-
5/21/2018 Dynasep Peach Depth Cartridge
3/4
CONSTRUCTION
Media Polyester or Polypropylene
Gaskets/End Cap Integral thermally bondedpolyester or polypropylene.Optional buna-n or viton with
metal end caps.
Core None in standard construction.If required louvered,carbon steel.
OPERATIONAL DATA
Recommended Element Change Out:12 - 14 PSID / .83 - .97 bar.
See chart below for collapse strengths
Maximum Operating Temp:
Polyester 240 F / 116 CPolypropylene 180 F / 82 CNote:Temps from 200 - 240F require a corefor 4.5 & 5.5 O.D. filters.
Micron Ratings:0.5, 1, 5, 10 SCW=0.3
Recommended Torque to Seal Filters: 5-10 ft-lbsNOTE:This Torque should not be exceeded.
PRODUCT ADVANTAGES
PEACH element has a high density twith tolerances of +/- 5%, as comparto fiber glass tubes with tolerances o+/- 15%
Integral end cap serves as gasket =60 Durometer
Long shelf life on elements without cResistant to erosion at high velocitiesDirect replacement to standard Fiber
element
Cylindrical elasticity eliminates collapon element carrier
Multiple bonded layers for strength arigidity
Graded density for higher dirt loadinand coalescing efficiencies
Hydrophilic and oliophilic materialsmeans greater coalescing efficiencies higher rates
No binders or glues for more directchemical compatibility
ISO 9001 CERTIFICATIOPECO Filtration Elements are manufactured u
a quality management system certified to ISO 9
This assures that each PECO Filter is engineere
manufactured to the highest level of q
standards therefore assuring you cons
tolerances and qualityfilter after filter!
CORE COLLAPSE STRENGTHS: PSID
Size
3
4.5
5.5
Temp F
100
150
200
100
150
200
100
150
200
No Core
40
35
20
30
25
N/R
N/A
N/A
N/A
STD Core
N/A
N/A
N/A
50
50
50
35
35
35
High PressureCore
N/A
N/A
N/A
145
145
145
N/A
N/A
N/A
N/R = Not RecommendedN/A = Not Applicable
Notes:
1. Polypropylene is recommended in filter/separators which are
downstream of an amine processing plant due to possible contact
with carryover amine fluids.
2. It is recommended that a core be used in the PCHG elements when
retrofitting into some vessels other than PECO. PECO vessels
incorporate a full length element z-bar carrier to support the element
and therefore do not require a core in the standard 4.5 O.D. filters.
3. Refer to Core Reference Chart on back page to determine if cores
are available as standard.
PEACH GAS ELEMENTS
-
5/21/2018 Dynasep Peach Depth Cartridge
4/4
W/Core
Standard
Standard
Standard
W/O Core
N/A
N/A
N/A
Style
All KPCHG
All PPCHG
All BPCHC (S)
B
END CONFIGURATIONNo Symbol = No Gasket G = Thick Buna-N Gasket
V = Standard Viton B = Standard Buna-N Gasket
EXT = Extension
E = Extension CE = Closed Endcap w/bolt hole
5
MICRONNo Symbol = 1 Micron
SCW = 0.3 Iron Sulfide Barrier
A = 0.5 Micron5 = 5 Micron
10 = 10 Micron
336
DIMENSIONS
O.D. X LENGTH 12 = 3.0" X 12''
24 = 3.0'' X 24" 36 = 3.0'' X 36"
72 = 3.0'' X 72"
312 = 4.5'' X 12"324 = 4.5'' X 24"
336 = 4.5'' X 36"
372 = 4.5'' X 72"536 = 5.5'' X 36"
572 = 5.5'' X 72"
PCHG
PRODUCT LINE
PCHG
PECO Conical Helix Gas
PPCHG
Peerless PECO Conical Helix Gas
KPCHGKing Tool PECO Conical Helix Gas
BPCHC(S)BS&B PECO Conical Helix
Closed (Spring)
C
CORE TYPENo Symbol = No Core
C = Carbon Steel Core
MATERIALNone = Polyester
PP = Polypropylene
PCHG NOMENCLATURE CHART
AVAILABLE MODELS The PCHG is a direct replacement to the PECO FG gas element. *Comparisons illustrated for 1 Micron Elements
Length(in/mm)
12/304
24/609
36/914
72/1828
12/304
24/609
36/91472/1828
36/914
72/1828
OD(in/mm)
3/76
3/76
3/76
3/76
4.5/114
4.5/114
4.5/1144.5/114
5.5/139
5.5/139
ID(in/mm)
2.08/53
2.08/53
2.08/53
2.08/53
3.125/79.38
3.125/79.38
3.125/79.383.125/79.38
4.25/108
4.25/108
Model
PCHG-12
PCHG-24
PCHG-36
PCHG-72
PCHG-312
PCHG-324
PCHG-336PCHG-372
PCHG-536
PCHG-572
PCHG Dirt Loading(lbs/gms)
.71/323
1.50/684
2.24/1021
4.43/2020
1.17/533
2.33/1062
3.50/15967.00/3192
4.27/1947
8.11/3698
FG Dirt Loading(lbs/gms)
.70/319
1.45/661
2.2/1003
4.4/2006
1.05/478
2.09/953
3.14/14316.28/2863
3.83/1748
7.67/3496
* *
*See core reference chart as applicable.
*
CORE REFERENCE CH ART
W/Core
N/A
N/A
Optional
Standard
Standard
Standard
Standard
Standard
W/O Core
Standard
Standard
Standard
N/A
N/A
N/A
N/A
N/A
Style
PCHG 3 O.D.
PCHG SCW 3 O.D.
PCHG 4.5 O.D.
PCHG 4.5 O.D., 5 & 10
PCHG 5.5 O.D., 5 & 10
PCHG 5.5 O.D.
PCHG SCW 4.5 & 5.5 O.D.
PCHG A 3, 4.5 & 5.5 O.D.
N/A = Not Applicable
PrinPlease refer to www.perryequipment.com for most current literature edition.
Corporate Offices & PlantPERRY EQUIPMENT CORPORATION
Wolters Industrial Park
P.O.Box 640
Mineral Wells,Texas 76068
Telephone: 940-325-2575
800-877-PECO
Telefax: 940-325-4622
e-mail: [email protected]
Houston Branch Office1758 West Sam Houston Parkway N.
Houston,Texas 77043-3115
Telephone: 713-973-2575
Telefax: 713-467-0475
e-mail: [email protected]
Perry EquipmentItaliana S.R.L.via Camozzi, 106
24121 Bergamo (BG)
Italy
Telephone: 3903-523-6340
Telefax: 3903-523-6380
e-mail: [email protected]
Perry EquipmentDe MxicoParque Industrial Benito Jurez
Acceso III, 4-A
Quertaro, Quertaro, Mxico C.P. 76120
Telephone: 52-42-10-34-89
Telefax: 52-42-10-90-39
Parque Industrial Quertaro
Calle Cerrada La Noria #108
Santa Rosa Jaurequi
Quertaro, Quertaro, Mxico C.P. 76220e-mail: [email protected]
Perry EquipmentCorporationS.E. ASIA REGIONAL OFFICE
35-4 Jalan SP2/1
Taman Serdang Perdana, Seksyen2,
43300 Seri Kembangan
Selangor D.E., Malaysia
Telephone: 603-8941-2366
Telefax: 603-8941-1366
e-mail: [email protected]
Peco Filters, Ltd.1351 Hastings Crescent S.E.
Calgary, Alberta
Canada T2G-4C8
Telephone: 403-243-6700
Telefax: 403-287-9304
e-mail: canadasales@perryequipmen
European OfficesPERRY EQUIPMENT LTD.
Brunel Business CourtBrunel Way, Thetford
Norfolk 1P24 1HP
England
Telephone: 01842 821000
Telefax: 01842 821050
e-mail: [email protected]
www.perry-equipment.co.uk
e-mail:[email protected]
web si te :www.perryequipment.com
EL-PCHG-SL-01 (LHA 1/04))
Your loca l d istr ibutor :
*Above results are based on standard PECO testing protocol.