dynasep peach depth cartridge

5/21/2018 Dynasep Peach Depth Cartridge

1/4

P E R R Y E Q U I P M E N T C O R P O R AT I O

Series PCHG Gas Filtration Produ

USA Patent No. 5827430 and 5893856 (International Patents GE N G I N E E R E D F I L T R A T I O N T E C H N O L O G


2/4

The PEACH

Conical HelixStructureyields high flowand maximumefficiency.

THE PEACH

The PEACH consists of severallateral sections of PEM formed into aconical helix pattern. Each section

consists of multiple helicaly wrappedlayers. Through thermal bonding,

these spiral layers are applied toconform and overlap the previous

layer, forming a conethe conicalhelix structure. This structure resultsin a graded density pattern that yields

high contaminant loading, structuralstrength, maximum

efficiency, and excellent reproducibility.

GRADED DENSITY

Each layer of the PEACH filter

performs a particular function.While all layers are designed to a

specific micron rating, each lateralsection removes contaminants. The

outer layer typically removes thebulk solids. As contaminants move

through the depth of the cone,the filter densities increase to meetthe required micron rating. The

inner layers of the filter providestructural strength.

Peach Media 150XSEM Photo by Southwest Research Institute

PEACH FILTRATION TECHNOLO GY

A performance engineered cartridge

Predictable performance Performance assured from star t-up No unloading High dirt holding capacity No media migration

ENVIRONME NTAL FEATURES

100% synthetic Incinerable (CO2 + Water) Trace ash & no plastic residue Ease of disposal: crush, shred, chop, etc. Coreless, no metal parts

No fiberglass media

PECO ENGINEERED MEDIAPEM, specifically designed for filtrationcoalescing, is the key component in

the production of the PEACH gaselement.The PEM is designed with

an assigned micron rating andefficiency. Raw fibers of various

denier are weighed, blended andthermally bonded, then formed intoa compressed filter media sheet.

Various layers of PEM are then usedin the manufacture of the PEACH

gas element.

PECO ENGINEERED APPLIEDCONICAL HELIX TECHNOLOGYPEACH is the manufacturingprocess incorporating PEM to

form an element into a conicalhelix.This innovative patentedprocess makes possible a graded

density pattern which yieldsoutstanding filtration.

PEACH FILTRATIO N TECHNOLOGYgives you consistent, predictable performance,high contaminant loading, and high efficiency.

PEACH - an innovative gas filtering/coalescing technology.


3/4

CONSTRUCTION

Media Polyester or Polypropylene

Gaskets/End Cap Integral thermally bondedpolyester or polypropylene.Optional buna-n or viton with

metal end caps.

Core None in standard construction.If required louvered,carbon steel.

OPERATIONAL DATA

Recommended Element Change Out:12 - 14 PSID / .83 - .97 bar.

See chart below for collapse strengths

Maximum Operating Temp:

Polyester 240 F / 116 CPolypropylene 180 F / 82 CNote:Temps from 200 - 240F require a corefor 4.5 & 5.5 O.D. filters.

Micron Ratings:0.5, 1, 5, 10 SCW=0.3

Recommended Torque to Seal Filters: 5-10 ft-lbsNOTE:This Torque should not be exceeded.

PRODUCT ADVANTAGES

PEACH element has a high density twith tolerances of +/- 5%, as comparto fiber glass tubes with tolerances o+/- 15%

Integral end cap serves as gasket =60 Durometer

Long shelf life on elements without cResistant to erosion at high velocitiesDirect replacement to standard Fiber

element

Cylindrical elasticity eliminates collapon element carrier

Multiple bonded layers for strength arigidity

Graded density for higher dirt loadinand coalescing efficiencies

Hydrophilic and oliophilic materialsmeans greater coalescing efficiencies higher rates

No binders or glues for more directchemical compatibility

ISO 9001 CERTIFICATIOPECO Filtration Elements are manufactured u

a quality management system certified to ISO 9

This assures that each PECO Filter is engineere

manufactured to the highest level of q

standards therefore assuring you cons

tolerances and qualityfilter after filter!

CORE COLLAPSE STRENGTHS: PSID

Size

3

4.5

5.5

Temp F

100

150

200

100

150

200

100

150

200

No Core

40

35

20

30

25

N/R

N/A

N/A

N/A

STD Core

N/A

N/A

N/A

50

50

50

35

35

35

High PressureCore

N/A

N/A

N/A

145

145

145

N/A

N/A

N/A

N/R = Not RecommendedN/A = Not Applicable

Notes:

1. Polypropylene is recommended in filter/separators which are

downstream of an amine processing plant due to possible contact

with carryover amine fluids.

2. It is recommended that a core be used in the PCHG elements when

retrofitting into some vessels other than PECO. PECO vessels

incorporate a full length element z-bar carrier to support the element

and therefore do not require a core in the standard 4.5 O.D. filters.

3. Refer to Core Reference Chart on back page to determine if cores

are available as standard.

PEACH GAS ELEMENTS


4/4

W/Core

Standard

Standard

Standard

W/O Core

N/A

N/A

N/A

Style

All KPCHG

All PPCHG

All BPCHC (S)

B

END CONFIGURATIONNo Symbol = No Gasket G = Thick Buna-N Gasket

V = Standard Viton B = Standard Buna-N Gasket

EXT = Extension

E = Extension CE = Closed Endcap w/bolt hole

5

MICRONNo Symbol = 1 Micron

SCW = 0.3 Iron Sulfide Barrier

A = 0.5 Micron5 = 5 Micron

10 = 10 Micron

336

DIMENSIONS

O.D. X LENGTH 12 = 3.0" X 12''

24 = 3.0'' X 24" 36 = 3.0'' X 36"

72 = 3.0'' X 72"

312 = 4.5'' X 12"324 = 4.5'' X 24"

336 = 4.5'' X 36"

372 = 4.5'' X 72"536 = 5.5'' X 36"

572 = 5.5'' X 72"

PCHG

PRODUCT LINE

PCHG

PECO Conical Helix Gas

PPCHG

Peerless PECO Conical Helix Gas

KPCHGKing Tool PECO Conical Helix Gas

BPCHC(S)BS&B PECO Conical Helix

Closed (Spring)

C

CORE TYPENo Symbol = No Core

C = Carbon Steel Core

MATERIALNone = Polyester

PP = Polypropylene

PCHG NOMENCLATURE CHART

AVAILABLE MODELS The PCHG is a direct replacement to the PECO FG gas element. *Comparisons illustrated for 1 Micron Elements

Length(in/mm)

12/304

24/609

36/914

72/1828

12/304

24/609

36/91472/1828

36/914

72/1828

OD(in/mm)

3/76

3/76

3/76

3/76

4.5/114

4.5/114

4.5/1144.5/114

5.5/139

5.5/139

ID(in/mm)

2.08/53

2.08/53

2.08/53

2.08/53

3.125/79.38

3.125/79.38

3.125/79.383.125/79.38

4.25/108

4.25/108

Model

PCHG-12

PCHG-24

PCHG-36

PCHG-72

PCHG-312

PCHG-324

PCHG-336PCHG-372

PCHG-536

PCHG-572

PCHG Dirt Loading(lbs/gms)

.71/323

1.50/684

2.24/1021

4.43/2020

1.17/533

2.33/1062

3.50/15967.00/3192

4.27/1947

8.11/3698

FG Dirt Loading(lbs/gms)

.70/319

1.45/661

2.2/1003

4.4/2006

1.05/478

2.09/953

3.14/14316.28/2863

3.83/1748

7.67/3496

* *

*See core reference chart as applicable.

*

CORE REFERENCE CH ART

W/Core

N/A

N/A

Optional

Standard

Standard

Standard

Standard

Standard

W/O Core

Standard

Standard

Standard

N/A

N/A

N/A

N/A

N/A

Style

PCHG 3 O.D.

PCHG SCW 3 O.D.

PCHG 4.5 O.D.

PCHG 4.5 O.D., 5 & 10

PCHG 5.5 O.D., 5 & 10

PCHG 5.5 O.D.

PCHG SCW 4.5 & 5.5 O.D.

PCHG A 3, 4.5 & 5.5 O.D.

N/A = Not Applicable

PrinPlease refer to www.perryequipment.com for most current literature edition.

Corporate Offices & PlantPERRY EQUIPMENT CORPORATION

Wolters Industrial Park

P.O.Box 640

Mineral Wells,Texas 76068

Telephone: 940-325-2575

800-877-PECO

Telefax: 940-325-4622

e-mail: [email protected]

Houston Branch Office1758 West Sam Houston Parkway N.

Houston,Texas 77043-3115

Telephone: 713-973-2575

Telefax: 713-467-0475


Perry EquipmentItaliana S.R.L.via Camozzi, 106

24121 Bergamo (BG)

Italy

Telephone: 3903-523-6340

Telefax: 3903-523-6380


Perry EquipmentDe MxicoParque Industrial Benito Jurez

Acceso III, 4-A

Quertaro, Quertaro, Mxico C.P. 76120

Telephone: 52-42-10-34-89

Telefax: 52-42-10-90-39

Parque Industrial Quertaro

Calle Cerrada La Noria #108

Santa Rosa Jaurequi

Quertaro, Quertaro, Mxico C.P. 76220e-mail: [email protected]

Perry EquipmentCorporationS.E. ASIA REGIONAL OFFICE

35-4 Jalan SP2/1

Taman Serdang Perdana, Seksyen2,

43300 Seri Kembangan

Selangor D.E., Malaysia

Telephone: 603-8941-2366

Telefax: 603-8941-1366


Peco Filters, Ltd.1351 Hastings Crescent S.E.

Calgary, Alberta

Canada T2G-4C8

Telephone: 403-243-6700

Telefax: 403-287-9304

e-mail: canadasales@perryequipmen

European OfficesPERRY EQUIPMENT LTD.

Brunel Business CourtBrunel Way, Thetford

Norfolk 1P24 1HP

England

Telephone: 01842 821000

Telefax: 01842 821050


www.perry-equipment.co.uk

e-mail:[email protected]

web si te :www.perryequipment.com

EL-PCHG-SL-01 (LHA 1/04))

Your loca l d istr ibutor :

*Above results are based on standard PECO testing protocol.

dynasep peach depth cartridge

Documents