Electric water heating
2 www.kospel.pl
KOSPEL company was established in 1990. It appeared on the market as a manufacturer of electric instantaneous water heaters. From the very beginning of our presence we have set the goal to preserve the highest quality and attain our customers' satisfaction.
Since our company expanded and advanced in technological abilities the range of products has widened and their quality has improved. In 1998 the company relocated to new premises. Further in our development we built a new factory which modernised our production and made it even more efficient. Later, we have taken over a factory equipped with a modern automatic enamelling line. Due to these facts we are able to manufacture not only instantaneous water heaters, electric boilers but also storage water heaters hot water cylinders and recently solar collectors.
Because we meet the toughest quality requirements, our products have been certified with numerous certification centres worldwide. It has enabled us to expand into foreign markets. European Union countries and former Soviet Union countries are our leading export markets .
Our prior aim is to offer modern and energy-saving heating appliances which will ensure convenient and never-failing operation.
Modernization of our products is based on their current and potential users' opinion and diligent researches carried out by our Engineering Department. We are proud to inform that Kospel's appliances are being sold to over 35 countries and used by more than 2,5 million customers.
The latest technology is employed as early as at the design stage. We deploy extremely precise numericallycontrolled automatic machines, components producedby renowned companies and strict procedures ofsupervision. A modern stock of machines and a well equippedtool - room al lows for automat iza t ion o f mos tmanufacturing processes.
The inner inspection system is based on the highestquality standards. Particular elements and semifinishedproducts undergo various tests and verifications at each manufacturing stage. Each appliance is put on final regulations, correctness check and safety control before it leaves the factory. The reliability of our quality control system is confirmed by the periodical audits of many European certification centres.
Research and Development
Modern technology
Multi-stage quality management
To learn more about our appliances and company, please visit our website at: www.kospel.pl
All technical data in this catalogue is based on standards of Central European countries. However, KOSPEL S.A. is fully flexible to adjust its appliances to other standards.
BEABApproved
Content
3www.kospel.pl
Electric instantaneous water heaters
Electric storage water heaters
Vertical hot water cylinders
Horizontal solid fuel hot water cylinders
Solar collectors
SlimLuna
.............................................. 14................................................ 15
SE; SW; SB.............................. 18
WZ; WW; WB; WP; WPZ......... 20
KSH............................................... 16
Optimus............................................ 6
Amicus.............................................. 7
Primus............................................... 8
Opus................................................. 9
.............................. 10Luxus hydraulic
Bonus c
Focus c
electroni ............................. 11
electroni ............................. 12
Maximus......................................... 13
Kospel S.A. reserves the right to introduce technical improvment changes which are not present in this catalogue.
EKCO........................................... 21
Electric central heating flow boilers
The three most important factors should be taken into consideration while deciding on the optimal water heater: type and number of taps as well as the electric power supplies.
Below you will find a chart enabling the choice. It is cruicial to remember that the higher the heater power the more hot water you get.
Optimus from 3,5 kW
Optimus 5,5 kW
Amicus 4 kWfrom
Amicus 4 kWfrom *
Amicus 6 kW
Amicus 6 kW**
Amicus 6 kW***
Primus PU 5,5 kW
Primus5,5 kW
Opus 6,8 kWfrom
Opus 6,8 kWfrom
Opus PU 6,8 kWfrom
Luxus 9-12 kW
hydraulic
Luxus9**-15 kW
hydraulic
Luxus12-15 kW
hydraulic
Luxus hydraulic 18 kWfrom
Focus electronic 15 kWfrom
Focus 15 kWelectronic
from
Focus 15 kWelectronic
from
Focus 18 kWelectronic
from
Bonus electronic 9 kWfrom
Bonus electronic 12 kWfrom
Bonus electronic 18 kWfrom
Opus 6,8 kWfrom
Bonus electronic 9 kWfrom
Bonus electronic 9 kWfrom
Bonus electronic 9 kWfrom
Luxus hydraulic9**-15 kW
Luxus hydraulic9-12 kW
The optimal choice of the water heater
4 www.kospel.pl
* Allows to use one tap at a time ** Recommended use of a fine-stream shower head***Allows to use one tap at a time. Recommended use of a fine-stream shower head.
5
36kW
27kW24kW21kW18kW15kW12kW
9kW
6kW5,5kW5kW4,4kW4kW3,5kW
2 4 6 8 10 12 14 16 18
50
40
30
20
10
Q[l/min]0The chart above shows the water heater efficiency dependent on temperature rise. In order to reach water temperature of 40 C, the
0heater should warm it up by about 30 C (horizontal line). For example, 21kW water heater makes possible to obtain 10 litres of hot water per minute (vertical line).
zone 1
60 cm 240 cm
zone 2 zone 3
zone 0
240 cm
60 cm 240 cm
zone 2 zone 3
zone 1
zone 0
240 cm
Cost-effectiveness Electric instantaneous water heater switches on automatically and allows to obtain water straight away after turning the tap on. Because energy is consumed only while water is being used, it eliminates losses related to heat storage.
Due to its small dimentions and aesthetic look it can be assembled in the immediate vicinity of a tap which substantially reduces heat and water losses.
electric instantaneous water heater situated close to a point of use
water tank situated far from a point of use
Efficiency characteristics of instantaneous water heaters
Compulsory requirements concerning electric water heater assembly in rooms equipped with a bath or a shower
According to IEC 60364-7-701 : 1999* standard there are 4 zones presented on the pictures above. The heater should posses an adequate safety class depending on its location:
- zone 0 – IPX7,
- zone 1 – IPX5 (Primus, Opus, Luxus, Bonus – within shower cabin),
- zone 2 – IPX4 (the rest of KOSPEL appliances),
- zone 3 – IPX1,
- in public bathrooms (both zones,2 and 3)
water and energy losses due to hot water distribution
water and energy losses due to hot water distribution
water and energy consumption
water and energy consumption
tO
[ C]
energy losses due to hot water storage and reheating in a tank
www.kospel.pl
*Note: this international standard may be restricted depending on a country.
Opt
imus
6
from 3,5kW 5,5kW
Regulating valve allows for setting comfortable temperature at a maxi-mum possible flow of water.
Copper shielded heating elements Reliable technology ensures long life, resistance to water decay and air bubbles.
Tap included in the set
3,5kW water heater is equipped with a supply cord and can be plugged into a socket. Water heaters of a greater power should be connected to an electric terminal.
Fine-stream spray-head guarantees comfortable use and savings on water and energy up to 50%.
Most important advantages
Application
www.kospel.pl
198
110
210
35
95
0,12 ÷ 0,60
l/min
A
mm 198 x 210 x 95
Gz 1/2''
IP24
kg ~2,8 ÷ ~3,0
3,5 4,4 5,5
230V~
16 20 25
1,7 2,1 2,7
15,2 19,1 23,9
3x1,5 3x2,52mm
EPJ OptimusType kW
MPa
A
Technical data
Gz 1/2'’
Rated power
Rated voltage
Rated current
Fuse rated current
Min. connecting wires section
0 0Efficiency (at 30 C/ 86 F temp. rise)
Supply water pressure
Dimensions
Weight
Inlet and outlet section
Safety class
electric instantaneous water heater
All technical data is based on standards of Central European countries. However, Kospel S.A. is fully flexible to adjust its appliances to other standards.
Am
icus
7
from 4kW from 4kW* 6 kW 6 kW*
Copper shielded heating elements Reliable technology ensures long life, resis-tance to water decay and air bubbles.
Included in the set fine-s t ream spray-head guarantees comfortable use and savings on water and energy up to 50%.
LN
PE
N U V
L1
L2
L3N
PE
N U V
The heating box consists of 2 heating elements, which can be connected to 1 phase 230V ~ or to 2 phases of 3 phase installation 400V 2N ~.
www.kospel.pl
R e g u l a t i n g v a l v e a l lows for se t t ing comfortable tempera-ture at a maximum possible flow of water.
229 87
120
117
~110
33
120
209
Version EPO.Gabove sink
Version EPO.Dunder sink
* Allows to use one tap at a time. Recommended use of a fine-stream shower head.
0,12 ÷ 0,60
l/min
A
mm
Gz 1/2''
IP24
kg
2mm
EPO AmicusTypekW
MPa
A
4 5 6
230V~ or 400V 2N~
17,4 (8,7)* 21,7 (10,9)* 26,1 (13,0)*
20 (10)* 25 (16)* 32 (16)*
1,9 2,4 2,9
mm ~110
209 x 229 x 87
~ 2,4
3x2,5 (4x2,5)* 3x4 (4x4)*
Most important advantages
Technical data
electric instantaneous water heater
Rated power
Rated voltage
Rated current
Fuse rated current
Min. connecting wires section
0 0Efficiency (at 30 C/ 86 F temp. rise)
Supply water pressure
Dimensions
Weight
Inlet and outlet section
Safety class
Distance between inlet and outlet
( )*values for 400V 2N
All technical data is based on standards of Central European countries. However, Kospel S.A. is fully flexible to adjust its appliances to other standards.
Application
7 KATALOG 2008/09
Primus
8
Copper shielded heating elementsReliable technology ensures long life, resistance to water decay and air bubbles.
Fine-stream spray-head guarantees comfortable use and savings on water and energy up to 50%.
Version EPJ.P
Version EPJ.PU
www.kospel.pl
Regulating valve allows for setting comfortable temperature at a maximum possible flow of water.
The water heater is a non-pressure appliance, it can only be connected to a three-way tap, included in the set.
610
535
210
35
95
198
kW
MPa
A
l/min
A
mm
kg
2mm
230V~
IP25
4,4 5,5
0,12 ÷ 0,60
20 25
2,1 2,7
19,1 23,9
198 x 210 x 95
Gz 1/2''
~3,6
3x2,5
EPJ.P Primus
elec
tric
ins
tant
aneo
us w
ater
hea
ter
Most important advantages
Technical data Type Rated power
Rated voltage
Rated current
Fuse rated current
Min. connecting wires section
0 0Efficiency (at 30 C/ 86 F temp. rise)
Supply water pressure
Dimensions
Weight
Inlet and outlet section
Safety class
All technical data is based on standards of Central European countries. However, Kospel S.A. is fully flexible to adjust its appliances to other standards.
Application
Opus
9
Copper shieldedheating elementsReliable technology ensures long life, resistance to water decay and air bubbles.
Electronic regulation of water temperature
Water flow regulation knob
Version EPA-U
Model EPA230V~
Model EPA-C400V 2~
Version EPA-P
Version EPA-PU
U N
L
NPE
U N
L2
L1
L3
PE
N
www.kospel.pl
100200
295
142
40
34
26
6,8 8,4 7,0 8,6
230 V~ 400 V 2~
32 40 20 25
3,3 4,0 3,4 4,1
29,6 36,5 17,5 21,5
IP25
0,1 ÷ 0,6
295 x 200 x 100
Gw 1/2''
~2,3
3x2,53x4 3x6
EPA.. Opus EPA C.. OpuskW
A
l/min
A
kg
2mm
MPa
mm
elec
tric
ins
tant
aneo
us w
ater
hea
ter
Most important advantages
Technical data Type Rated power
Rated voltage
Rated current
Fuse rated current
Min. connecting wires section
0 0Efficiency (at 30 C/ 86 F temp. rise)
Supply water pressure
Dimensions
Weight
Inlet and outlet section
Safety class
The water heater is a non-pressure appliance, it can only be connected to fittings included in the set.
All technical data is based on standards of Central European countries. However, Kospel S.A. is fully flexible to adjust its appliances to other standards.
Application
Luxu
shydraulic
10
from 18kW12-15kW
Power regulationAllows to set the heater on full power or economic mode.
Automatically switches on 2 steps of heating Automatic “switch on” system and power selection according to the water flow rate.
Regulating valveallows for setting comfortable tempera-ture at a maximum possible flow of water.
Modern design
3x21,7 3x26,0 3x30,3 3x34,63x13,0 3x17,3
400V 3~
9 12 15 18 21 24
Gw 1/2''
~100
IP 25
~ 5,1
440 x 245 x 120
0,15 ÷ 0,6
7,2 8,7 10,1 11,64,3 5,8
4x2,5 4x4 4x64x1,5
3225 4016 20
mm
mm
l/min
A
kg
2mm
MPa
kW
A
KDH Luxus hydraulic
www.kospel.pl
120245
440
82
~100
Most important advantages
Technical data
electric instantaneous water heater
Type Rated power
Rated voltage
Rated current
Fuse rated current
Min. connecting wires section
0 0Efficiency (at 30 C/ 86 F temp. rise)
Supply water pressure
Dimensions
Weight
Inlet and outlet section
Safety class
Distance between inlet and outlet
Copper shieldedheating elementsReliable technology ensures long life, resis-tance to water decay and air bubbles.
All technical data is based on standards of Central European countries. However, Kospel S.A. is fully flexible to adjust its appliances to other standards.
Application
Bon
uselectronic
11
from 18kW
Copper shielded heating elementsReliable technology ensures long life,resistance to water decay and air bubbles.
Electronic control system ensures stability and modulation of water temperature
0 0from 30 C to 60 C.
Priority switchCooperation with another electric high power consumption appliance.
Modern design Water flow sensorSensor operates at very low pressure 0,1MPa and water flow as little as 2,5 l/min.
Suitable for cooperation with solar panels and heat pumpsCan work on already pre-heated water. Inletting water
0temperature up to 70 C.
3x21,7 3x26,0 3x30,3 3x34,6 3x39,03x13,0 3x17,3
400V 3~
9 12 15 18 21 24 27
Gw 1/2''
~100
IP 25
~ 5,1
440 x 245 x 120
0,1 ÷ 0,6
7,2 8,7 10,1 11,6 13,04,3 5,8
4x2,5 4x4 4x64x1,5
3225 40 5016 20
mm
mm
l/min
A
kg
2mm
MPa
kW
A
KDE Bonus electronic
from 12kW
www.kospel.pl
120245
440
82
~100
Most important advantages
Technical data
electric instantaneous water heater
Type Rated power
Rated voltage
Rated current
Fuse rated current
Min. connecting wires section
0 0Efficiency (at 30 C/ 86 F temp. rise)
Supply water pressure
Dimensions
Weight
Inlet and outlet section
Safety class
Distance between inlet and outlet
All technical data is based on standards of Central European countries. However, Kospel S.A. is fully flexible to adjust its appliances to other standards.
Application
suitable for solar
panels
and heat pumps
12
from 18kWfrom 15kW
3x21,7 3x26,0 3x30,3 3x34,6
400V 3~
15 18 21 24
Gw 1/2''
~75-110
IP 24
~ 3,5
440 x 250 x 105
0,2 ÷ 0,6
5,4 6,5 7,6 8,7
4x2,5 4x4 4x6
3225 40
mm
mm
l/min
A
kg
2mm
MPa
kW
A
EPVE Focus electronic
Electronic control system ensures stability and smooth regualtion of water
0temperature from 30 C 0 0to 60 C (1 C step).
LCDThe display allows to read the inlet and outlet temperatures, the flow rate and current power consumption.
Protection from air bubblesElectronic system after detecting air bubbles cuts off power supply and protects the heating element from burning-out.
Priority switchWater heater is able to cooperate with another electric high power consumption appliance.
Water flow sensorSensor operates at very low pressure 0,2MPa and water flow as little as 2,5 l/min.
www.kospel.pl
~369
27
440
250
~75-110
62
105
Type Rated power
Rated voltage
Rated current
Fuse rated current
Min. connecting wires section
0 0Efficiency (at 40 C/ 104 F temp. rise)
Supply water pressure
Dimensions
Weight
Inlet and outlet section
Safety class
Distance between inlet and outlet
Most important advantages
Technical data
electric instantaneous water heater
All technical data is based on standards of Central European countries. However, Kospel S.A. is fully flexible to adjust its appliances to other standards.
suitable for solar
panels
and heat pumps
Application
Suitable for cooperation with solar panels and heat pumpsCan work on already pre-heated water. Inletting water
0temperature up to 70 C.
Focu
selectronic
13
3x52
400V 3~
36
Gw 1/2''
~110
IP 24
~ 10,6
570 x 300 x 160
0,1 ÷ 0,6
17,3
4 x 10
63
mm
mm
l/min
A
kg
2mm
MPa
kW
A
EPP-36 Maximus electronic
www.kospel.pl
Electronic control system ensures stability and modulation of water
0 0temperature from 30 C to 60 C.
Copper shielded heating elementsReliable technology ensures long life, resistance to water decay and air bubbles.
Priority switchWater heater is able to cooperate with another electric high power consumption appliance.
Water flow sensorSensor operates at very low pressure 0,1MPa and water flow as little as 2,5 l/min.
160
55
570
489
300
~100
Most important advantages
Technical data Type Rated power
Rated voltage
Rated current
Fuse rated current
Min. connecting wires section
0 0Efficiency (at 30 C/ 86 F temp. rise)
Supply water pressure
Dimensions
Weight
Inlet and outlet section
Safety class
Distance between inlet and outlet
All technical data is based on standards of Central European countries. However, Kospel S.A. is fully flexible to adjust its appliances to other standards.
suitable for solar
panels
and heat pumps
Application
Suitable for cooperation with solar panels and heat pumpsCan work on already pre-heated water.
0Inletting water temperature up to 70 C.Maximuselectronic
elec
tric
ins
tant
aneo
us w
ater
hea
ter
Slim
depth 36 cm only
80 litres 80 litres
20 litres
80 litres
40 litres
50 litres
60 litres
30 litres
30-40 litres20-30-40 litres 50-60 litres
Type OSV Slim
0,63 0,94 1,25
7 - 77
1500W / 230V ~
1,6 2,0
0,50 0,57 0,63 0,70 0,76 0,82
2,6
20 30 40 50 60 80
427 519 689 809 927 1167
110
Gw 1/2"
h
mm
l
OC
kWh/24h
mm
14 www.kospel.pl
elec
tric
sto
rage
wat
er h
eate
r
Capacity
Rated power / Voltage
Temperature range0Heating time T=40 C D
24hrs electricity losses
Height
Distance between water connections
Water connections
Technical data
All technical data is based on standards of Central European countries. However, Kospel S.A. is fully flexible to adjust its appliances to other standards.
Application
Slim storage water heater was designed for limited space. Thanks to reducing the width to 36 cm only, it occupies much less space than traditional storage water heaters.
*Also available with a 2kW heating element
The thermal isolation, made of thick polyure-thane, minimalizes the thermal loss.
Magnesium anodes give active anticorrosion protection what enhance its lifespan.
Pickled steel sheet covered with enamel ensures high durability of the heater. The enamel is spread by the dry enamelling technique which guarantees covering the tank precisely and evenly.
285 163 189305
427
438
15www.kospel.pl
Technical data
All technical data is based on standards of Central European countries. However, Kospel S.A. is fully flexible to adjust its appliances to other standards.
Type
Capacity
Rated power/voltage 2000W / 230V~
Rated pressure 0 MPaTemperature range 23 - 70OC
l
POW.G-10 POW.D-10
102000W / 230V~
POC.G-5 POC.D-5
5
0,623 - 70
Water connections
Weight kg
Dimensions mm 438x305x189~6,2~4,4
Gw 3/8" Gz 1/2"Gz 1/2"
427x285x163
Luna
POW.G-10 Luna with a tap
POC.Db-5 with a tap mixer
Luna inox
POW.D-10 with a tap
Luna
POC.G-5 Luna inox(connect it to a any tap mixer)
POC.D-5 (connect it to any tap mixer)
Luna inox
high density polyurethane thermal insulation
Pressure water heater POC Luna inox
Non-pressure POW Luna
POC.Gb-5 Luna inox with a tap mixer
5 litresstainless steel tank
Luna storage water heater was designed to ensure quick and easy access to hot water. It is perfectly suitable for being assembled next to the sink in a sanitary room, a bathroom or a kitchen.
! very short heating time:o- 5 litre - 5,5 min. at 25 C temperature rise
o- 10 litre - 8,5 min. at 25 C temperature rise
! resistant to corrosion, plastic (10l) or stainless steel (5l) tank
o! option of an anti-freezing setting at 7 C
o! temperature range between 23-70 C
10 litres
! Absorber plate is covered with high selective BlueTec ETA PLUS coat to ensure the highest level of solar radiation convertion. Absorption coefficient: 95%.
! Advanced ultrasonic welding technology is applied to connect the absorber to the copper tubes. It guarantees the highest efficiency of thermal energy transfer.
! High quality prismatic solar glass to improve the effectiveness of radiation permeability
! Sealed enclosure is made of powder painted aluminium sheet to ensure long term durability of collector structure.
! Thermal insulation is made of condensed mineral rock wool to minimise the thermal loss
! Collector elements are made of durable materials (copper, aluminium).
SOLAR KEYMARKCEN 025
Key advantages:
Hot water cylinder
Solar pump station with an expansion vessel
Solar fluid
Stainless steel flexible connectors
SolarComp 911 system controller
Connection kit
Electric instantaneous water heater made by Kospel (e.g. Focus electronic) heats water up when necessary
Electric boiler made by Kospel (e.g. EKCO.LN2) to support the solar system when necessary
Solar collectors
Diagram of solar water heating system
Mixing valve allows to keep water temperature stable and ensures its rational usage
Optional
Solar collectors
Construction
Prismatic solar glass (3,2mm thickness)
Absorber plate with high selective Blue Tec ETA PLUS coat
Copper tubes
Rock wool insulation
Aluminium enclosure
16 www.kospel.pl
Technical data
! Flat collector KSH-2,0 (2pcs.)! Cylinder SB-250! SolarComp 911/TDC3 solar system
controller! Solar pump station (double pipeline)! Expansion vessel (18liters) with
a connection kit ! Collectors connection kit ! Stainless steel flexible connectors
(2pcs.)! Masking frame! Solar fluid (20liters)
ZSH-2/250 duoSOL
ZSH.A-3x2,3/400
! Flat collector KSH.A-2,3 (3pcs.)! Cylinder SB-400! SolarComp 911/TDC3 solar system
controller! Solar pump station (double pipeline)! Expansion vessel (33liters) with
a connection kit ! Collectors connection kit ! Stainless steel flexible connectors
(2pcs.)! Masking frame (2 pcs.)! Solar fluid (20liters)
ZSH.A-2x2,3/300
! Flat collector KSH.A-2,3 (2pcs.)! Cylinder SB-300! SolarComp 911/TDC3 solar system
controller! Solar pump station (double pipeline)! Expansion vessel (25liters) with ! a connection kit ! Collectors connection kit ! Stainless steel flexible connectors
(2pcs.)! Masking frame ! Solar fluid (20liters)
ZSH-4/400 quattroSOL
! Flat collector KSH-2,0 (4pcs.)! Cylinder SB-400! SolarComp 911/TDC3 solar system
controller! Solar pump station (double pipeline)! Expansion vessel (33liters) with
a connection kit ! Collectors connection kit ! Stainless steel flexible connectors
(2pcs.)! Masking frame (3 pcs.)! Solar fluid (20liters)
ZSH-3/300 triSOL
! Flat collector KSH-2,0 (3pcs.)! Cylinder SB-300! SolarComp 911/TDC3 solar system
controller! Solar pump station (double pipeline)! Expansion vessel (25liters) with
a connection kit ! Collectors connection kit ! Stainless steel flexible connectors
(2pcs.)! Masking frame (2pcs.)! Solar fluid (20liters)
Note! Solar sets are also available without a cylinder.
Width/Height/Depth
Weight
Surface
Glass thickness
Absorber
Absorber's surface
Active surface
Absorption / Emission coefficient
Optical efficiency
Coefficient k1
Coefficient k2
Liquid content
Max. working pressure
Flow: min.-max.
Collector
3,2
95 / 5
3,49
0,004
81,5
2,00
1,98
1,13
0,6
36
2,27
1072 x 2119 x 90
1 - 4
95 / 5
KSH - 2,3
0,004
0,6
1 - 4
3,2
81,5
3,49
1,4
41,8
2,6
2,3
2,28
KSH - 2,0
1072 x 2424 x 90
KSH.A - 2,0 KSH.A - 2,3
1072 x 2119 x 90
0,6
36
2,27
3,2
2,00
1,98
95 / 5
80,1
3,89
0,005
1,13
1 - 4
Connection
Insulation thickness
R18
45 45
R18
45
R18
45
R18
0,6
3,2
95 / 5
77,0
4,62
0,003
1,4
1 - 4
1072 x 2424 x 90
41,8
2,6
2,3
2,28
copper plate, selective layer BlueTec ETA PLUS, ultrasonic welded copper tubes
copper plate, selective layer BlueTec ETA PLUS, ultrasonic welded copper tubes
aluminium plate, selective layer BlueTec ETA PLUS, ultrasonic welded copper tubes
aluminium plate, selective layer BlueTec ETA PLUS, ultrasonic welded copper tubes
Kospel offers complete solar heating system. The following assumptions has been used in order to size the systems: the average annual solar hot water demand - about 60%, active absorber surface area 1,2-1,6m per person, the average daily hot water consumption - about 60 litres per person, system height – 6 m (higher systems must be designed by professionals).
Solar sets
2-3 persons
4-5 persons
5-6 persons
5-6 persons
3-4 persons
mm
kg
2m
mm
mm
%
2W/m K
2 2W/m K
%
2m
2m
3dm
MPa
3dm /min
mm
17www.kospel.pl
Highly effective thermal insulationEffective thick thermal insulation minimises heat losses from the cylinder.
Its rigid silver colour enclosure ensures aesthetic look and provides protection against mechanical damages.
Immersion heaters may be fitted to the cylinders
High performance hot water cylindersCylinders feature a large surface area of heating coils, the lower one positioned at the very bottom of the cylinder. It guarantees fast heat transfer and steady water temperature distribution.
SW TERMO MAX single coil 100, 120, 140 litres
The most modern enamelling technologyKospel boasts the most modern fully automatic dry enamelling line for manufacturing hot water cylinders. The dry enemalling technology is an advanced method of applying enamel with optimal, even thickeness over the entire inner surface of the cylinder. This method as compared to traditional wet enamelling technology improves quality of enamel coat and ensures long-lasting cylinder performance.
magnesium anode
temperature indicator
D
F
I
L
M
hot water outlet Gw 3/4"
cold water inlet Gw 3/4"
connector for circulation Gw 3/4"
pipe for temperature sensor
A
BC
inspection hole and supplementary
magnesium anode (250, 300 litres)
immersion heater connector (cork)
Gw 6/4"
SE TERMO MAX 200, 250, 300, 400 litresVertical hot water cylinders
A
B
D
E
F
G
I
L
M
hot water outlet Gw 3/4"
cold water inlet Gw 3/4"
connector for circulation Gw 3/4"
temperature indicator
magnesium anode
immersion heater connector (cork)
Gw 6/4"
hot water feed Gw 3/4"
hot water return Gw 3/4"
pipe for temperature sensor
A very extensive range of immersion heaters can be used in our cylinders. They are available from 1.4kW up to 9kW.
SE-200 SE-250
250200
0,6
-
-
-
-
-
-
-
-
695
1089
249
443
127
600
1306
266
-
-
989
-
-
1109
-
-
1464
1609
-
-
833
-
-
943
-
-
1230
1379
-
A
B
C
D
E
G
I
K
M
N
F
H
J
L
l
MPa
2m
2m
kW
kW
kWh
mm
2,0 2,1
Storage capacity
Surface area of upper coil
Surface area of lower coil
Model
Rated pressure
Power of upper coilO 80/10/45 C*
Power of lower coilO 80/10/45 C*
24hrs electricity losses**
Diameter
Dimensions
18 www.kospel.pl
extra heat exchanger Gw 1” outlet
extra heat exchanger Gw 1" inlet
E
N
extra heat exchanger Gw 1” outlet
extra heat exchanger Gw 1" inlet
E
N
SW TERMO MAX single coil 200, 250, 300, 400 litres SWZ TERMO MAX entries of an external heat exchanger
single coil 200, 250, 300, 400 litres
SB TERMO SOLAR twin coil 200, 250, 300, 400 litres SBZ TERMO SOLAR entries of an external heat exchanger
twin coil 200, 250, 300, 400 litres
hot water outlet Gw 3/4"
cold water inlet Gw 3/4"
connector for circulation Gw 3/4"
temperature indicator
magnesium anode
immersion heater connector (cork) Gw 6/4”
hot water feed Gw 1”
hot water return Gw 1”
pipe for temperature sensor
D
E
G
F
I
L
M
A
B
C
inspection hole and supplementary
magnesium anode (250, 300 litres)
hot water outlet Gw 3/4"
cold water inlet Gw 3/4”
connector for circulation Gw 3/4"
temperature indicator
magnesium anode
immersion heater connector (cork) Gw 6/4"
hot water feed Gw 1”
hot water return Gw 1”
pipe for temperature sensor
pipe for temperature sensor
D
E
GF
H
I
J
L
K
M
heating medium feed Gw 1”
heating medium return Gw 1”
AB
C
inspection hole and supplementary
magnesium anode (250, 300 litres)
SW-250SWZ-250
SW-300SWZ-300
SW-400SWZ-400
SB-200SBZ-200
SB-250SBZ-250
SB-300SBZ-300
SB-400SBZ-400
SW-140 SW-200SWZ-200
SW-120SW-100SE-300 SE-400
100
-
0,8
423
-
34
1,2
923
-
727
817
-
1195
-
-
-
1064
120
-
-
1,3
1094
214
-
1365
-
-
-
1235
500
230
-
111
tank 0,6 / coil 1,0
1,0
37
250 300 400140 200300 400
0,6
-
-
-
-
-
-
-
-
2,4
755
1335
253
447
124
-
1015
-
-
1125
-
-
1498
1660
-
1,2
42
1,5 1,7
50 56
1,1
39
-
-
1,4
1163
-
858
675
-
-
-
2,0
1306
-
1610
1333
-
1464
-
258
127 124
600
813822
-
-
1435
-
-
1305
471
912 913
777
602
-
-
-
2,1
1089
740
841
-
1379
1121
-
1230
316
695 755695
1323
249
443
-
983
-
-
1093
-
-
1464
1614
-
241 245
916 920
714 717
- -
- -
- -
2,7 2,4
1323 1335
852 856
958 986
- -
1614 1660
1355 1551
- -
1464 1498
250 300 400200
858
395
903
0,75
1,1
32
39
2,0
1306
813
993
1290
1610
1333
1098
1464
-
258
127
600
tank coil 0,6 / 1,0
687
1,0
37
2,1
1089
628
836
1079
1379
1121
746
941
1230
316
124
695 755
241 245
378 381
0,8 0,9
34 36
916 920
1,5 1,7
50 56
2,7 2,42,7
1323 1335
852 856
1070 1076
1313 1319
1614 1660
1355 1551
980 986
1175 1181
1464 1498
O 3* Following parameters: 80/10/45 C – heating water temp./ feed water temp./ domestic water temp, flow rate of heating water through the coil -3 m /h.O** Constant water temp.(60 C).
19www.kospel.pl
20 www.kospel.pl
Temperature indicator
Horizontal hot water cylindersdesigned for cooperation with solid fuel sources of heat
TERMO HIT
Water diffuserThe water diffuser to reduce mixing of cold and hot water. It guarantees steady water temperature distribution.
Exceptional thermal insulationThe thermal insulation made of black hardened polystyrene foam designed for application in advanced heat engineering. The hardened and very dense foam provide better thermal insulation and protection against mechanical damages.
WZ modelfor co-operation with a traditional solid fuel cooker
WW model (twin heating coil)
for co-operation with a low temperature solid fuel boiler
WB model (twin heating coil)
for co-operation with both a solid fuel cooker and a low temp. solid fuel boiler
WP and WPZ***(double jacket) for co-operation with a low temperature solid fuel boiler
The double jacket model is characterised with the largest surface of heat transfer and the highest thermal power which ensures the shortest heating time.
A hole that enables to insert an immertion heater Gw 6/4” (in all models of heat exchangers)
Immersion heater with a thermostat – power 1400W or 2000W
Ý 4
80
mm
24
0 m
m
cold water inlet Gw 3/4"
circulation Gw 3/4”
lenght
hot water outlet Gw 3/4"
hot water inlet Gw 1"
Ý 5
10
mm
Gw 1"hot water outlet
Gw 3/4"cold water inlet
circulation Gw 3/4”
lenght
hot water outlet Gw 3/4"
circulation Gw 3/4”
lenght
connection to solid fuel cooker Gz 5/4"
Ý 4
80
mm
24
0 m
m
hot water outlet Gw 3/4"
cold water inlet Gw 3/4"
circulation Gw 3/4”
lenght
hot water outlet Gw 3/4"
Ý 4
80
mm
24
0 m
m
connection to solid fuel cooker Gz 5/4"
cold water inlet Gw 3/4"
A large surface of heat transfer and high thermal power support domestic hot water very quickly.
inlet from a boiler Gz 5/4" inlet from a boiler Gz 5/4"
outlet to a boiler Gz 5/4" outlet to a boiler Gz 5/4"
0 3* Following parameters: 80/15/45 C (heating water temp./feed water temp./domestic water temp.), heating water flow through the coil 2,67m /h.** WP model is designed for open vented central heating systems.*** WPZ double jacket hot water cylinder has additional entries for a solid fuel cooker – connecting pipes as in WZ model.
ModelWP-100
WPZ-100***
WP-120
WPZ-120***
WP-140
WPZ-140***
WZ-80WW-80WB-80
WZ-100WW-100WB-100
WZ-120WW-120WB-120
WZ-140WW-140WB-140
l
MPa
100
0,7
19,3
405
1085
120
0,93
25,2
526
1255
140
1,0
26,8
567
1325
2m
kW
l/h
mm
0,3
9,5
235
80
920
100
1125
0,4
120
1295
11,4
295
140
1365
container 0,6 / coil 0,6 container 0,6 / double jacket 0,15**
Capacity
Rated pressure
Surface of heat transfer
Thermal power*
Efficiency*
Cylinder lenght
Ideal for co-operation with solid fuel cookers, boilers and fire-places
Technical data
EKCO
21www.kospel.pl
electric central heating flow boiler
EKCO Boiler is one of the most modern and complete electric boilers in the world. It was designed as an installer’s friendly device to reduce unnecessary external plumbing and pipe work on the wet central heating system.
Its compact casing allows the boiler to be easily wall-mounted in the most convenient place (even in a kitchen cupboard). While installing an electric boiler there is no need for building either a chimney or a flue insert or a boiler room.
EKCO Boiler offers high thermal comfort and a precise temperature regulation in heated rooms. Electronic control system guarantees nearly maintenance free and economic work.
To ensure maximum efficiency, the boiler boasts a 6-stage heating using a single copper heat exchanger. With this unique facility both electricity consumption and running costs are controlled through any heating cycle.
The incorporated user-friendly control panel allows the user to identify flow rate, the operating temperature and certain power (kW) of the boiler at any given time. Apart from that, it helps to diagnose any faults, which may occur, by displaying the fault codes.
automatic air vent
over heat stat
expansion vessel
control panel
power board
heating box
pump
safety valve
magnetic filter
by-pass
#Noiseless operation
#No flue or chimney required
#Nearly no maintenance required
#Clean and flexible installation
#Can be located almost anywhere in a property
#Ideal for both apartments and traditional houses
#Energy efficient
#Automatic power selection
#Electronic power switching elements
#Economic running costs
#24-hour fully controllable by the user
#Easy to operate
#No exhaust fumes or any other contamination
#No risk of carbon monoxide poisoning or a gas explosion
#Multiple fail-safes fitted in unit
#Co-operation with a domestic hot water tank and a three-way valve
www.kospel.pl22
Kospel boasts an extensive range of electric wall-hung boilers. All of them are equipped with a pump, manometre, air-vent and a safety valve + other different accessories. The below information will allow you to select the best solution for your requirements.
EKCO.L1
EKCO.L1z
a universal solution for a wet central heating system (heating �Otemperature setting from 20 C to 85 C)
co-operation with a domestic hot water cylinder(tank), setting �temperature in the tank and control of a three-way valve
EKCO.LN1z
just like EKCO.L1z boiler but a 6 litre expansion tank incorporated �in the boiler
EKCO.L1p EKCO.L1Np�
a boiler dedicated to underfloor heating (heating temperature �O Osetting from 20 C to 60 C)
EKCO.L1Np
just like EKCO.L1p but a 6 litre expansion tank incorporated in the �boiler
EKCO.LN2
EKCO.LN2
all EKCO.L1Nz features including an expansion vessel(heating �O Otemperature setting from 20 C to 85 C)
built in by-pass and a magnetic filter�
EKCO.LN2p
a boiler dedicated to underfloor heating (heating temperature �O Osetting from 20 C to 60 C)
EKCO.M
EKCO.M1z
temperature control based on both outdoor and room sensors�
programming room temperatures according individual needs for �each day of the week, four room temperatures to be set by the user
O Oheating temperature setting from 40 C to 85 C�
control up to 8 boilers in a cascade connection�
control of 1 or 2 central heating circuits and many more�
EKCO.MNz
just like EKCO.Mz boiler but a 6 litre expansion tank incorporated �in the boiler
EKCO.T
EKCO.T
power from 30 to 48kW in a compact case�O Oheating temperature setting from 40 C to 85 C�
co-operation with a hot water cylinder�
doubled: over heat safety cut-out, air-vent�
EKCO.TM
all features of boiler EKCO.M1z and EKCO.T in one boiler�
O
EKCO.L1
EKCO.M
EKCO.LN2
EKCO.T
electric boilers
23
2
1
1
STER.
4 5
1
8
Parallel boiler co-operation with another gas or oil boiler as an alternative source of heat. Such a system permits the boiler to work during a cheap, off-peak tariff, as well as, an emergency source of heat.
31
Mixed energy-saving system with EKCO Boiler which worksin parallel with a heat pump or a solar system.
76
1STER.
8
EKCO.(z) Boiler connected to a domestic hot water tank (hot water exchanger).
4
1
8
To heat large buildings (e.g. factory rooms) a cascade connection is used. It allows for obtaining adequately high thermal power. In that system the EKCO.M boiler should be used as a master appliance and the EKCO.L - as subordinate ones.
1
1. 2. Electric instantaneous water heater3. Another boiler4. Domestic hot water tank5. Wood-open fireplace6. Heat pump7. Heat exchanger8. Three-way valve
EKCO electric central heating flow boiler
NOTE: The above figures present pictorial schemes only. These are examples of solutions frequently used. In order to install central heating, suitable for an individual, it needs to be entrusted to a company that is specialised in that field.
Sample schemes of central heating systemsCentral heating systems with KOSPEL EKCO boiler requires minimum investment, guarantee highly convenient maintenance and energy-savings.
EKCO.Mz with a domestic hot water tank and two wet central heating systems.
4
1
8
www.kospel.pl
Technical data
All technical data is based on standards of Central European countries. However, Kospel S.A. is fully flexible to adjust its appliances to other standards.
Co-operation with an electric instantaneous water heater To minimise your house max. power, give your heater priority, then when the heater is on, the boiler will be off. There are special entries on both appliances to interconnect them.
700x425x285 710x418x251,5700x425x285
EKCO boiler
40 - 85
660x380x175 660x380x175 660x380x175 700x425x285 815x503x197
16 24
20 - 60
16 24
20 - 85
24,5
20 - 60
24,5
40 - 85
16 24 29 29
EKCO.L1(n)z..p / EKCO.LN2(p) / EKCOM1(n)z EKCO.T(M)
kW
kg
mm
OC
4 6 8 12 15 18 21 24 30 36 42 48Rated power
Weight
Dimensions
Heating temperature
Heating output BTU/h ~13600 ~27300 ~40900 ~61400 ~71700 ~81900 ~102455 ~122946 ~122946 ~122946~20500 ~51200
EKCO.L1z EKCO.L1Nz EKCO.L1p EKCO.L1Np EKCO.LN2 EKCO.LN2p EKCO.M1z EKCO.M1Nz EKCO.T EKCO.TM
220 - 240V ~ / 380 - 400 V 3 N~ 380 - 400 V 3 N~ 3x400 V 3 N~Rated voltage
EKCO Boiler (EKCO.(z)) co-operation with a wood-open fireplace or with a solid fuel boiler. Such a system guarantees low costs and great running comfort at the same time.
EKCO.(p) Boiler is designed for a wet underfloor heating system. A control system adjusts water
O Otemperature from 30 C to 60 C. Such an installation does not require either mixing valves or additional accessories, which considerably lower investment costs.
KOSPEL S.A.ul. Olchowa 1 75-136 Koszalintel. +48 94 317 05 00fax +48 94 317 05 37e-mail: [email protected]
Electric instantaneous water heaters
Solar collectors
Electric storage water heaters
Domestic hot water cylinders
Electric central heating flow boilers