Facts are facts and details are details.
Royal® Building Products offers
a seriously complete line of 100%
cellular PVC trim, moulding and siding
accessories. Which means you can
always rely on us for everything
from show-stealing window and
door surrounds to dormer and garage
door fascia. When it comes
to building homes that make
statements: Everything is important.
2
3
Table of Contents
Window & Door Mouldings .....................................................4
Trimplank .................................................................................6
Ceiling & Wall Mouldings ........................................................7
Decorative Mouldings .............................................................8
Garage Door Mouldings ........................................................10
Royal Trimboard.....................................................................11
Installation Tips .....................................................................12
Product Cross Reference.......................................................14
How to Place a Special Order ...............................................15
4
7526 3/0 Brick Mould Kit
2"
1 1/4"
Kit contains: 2 pc. 7' & 1 pc. 3'
7526 Brick Mould WM180
2"
1 1/4"
Lengths: 8', 10', 17'
7252 Florida Brick Mould
1 5/8"
11/16"
Lengths: 8', 10'
2590 Backband Casing
4 1/2"
1 3/16"
Lengths: 8', 12'
Window & Door Moulding
Item availability is subject to change. 5
7181 Door Frame Jamb
4 9/16"
1 1/4"
Length: 7' Length: 7'
7117 Window Sill
5 1/4"
1 1/4"
7118 Sill Nose
1 3/8"
1 5/16"
Length: 7'
2449 Drip Cap
1 5/8"
11/16"
Lengths: 8', 12'
6
7318 Trimplank 1x4
Lengths: 8', 12'
7311 Trimplank 1x6
Lengths: 8', 12', 16'
2150 Stop
Length: 12'
2709 Flat Utility Trim
Length: 8'
5 1/2"
3/4"3 1/2"
3/4"
1 1/2"
5/8"
5 13/16"
5/16"
Trimplank
7Item availability is subject to change.
Ceiling & Wall Moulding
9734 Beaded Planking
Length: 12'
2352 Exterior Planking
Lengths: 8', 12', 16'
7527 Base WM623
Lengths: 12', 16'
5 3/4"
1/2"5 15/32"
3/8"
3 1/4"
9/16"
8
Decorative Moulding
2435 Crown
Length: 12'
7158 Rams Crown
Length: 12'
7901 Shingle Mould
Length: 8'
2598 Bed Mould
Length: 12'
3 5/8"
9/16"
2"
1 13/32"
1 23/32"
21/32"
1 9/16"
9/16"
9Item availability is subject to change.
2355 Colonial Casing
Lengths: 12', 16' Lengths: 12', 16'
7719 Outside Corner
2599 Shingle Mould
Lengths: 8', 12'
2450 Base Cap
Lengths: 8', 12'
2 1/4"
11/16"
1 1/8"
1 1/8"
1 5/8"
11/16"
1 1/8"
11/16"
2018 Lattice
Length: 8'
2021 Scotia/Cove
Length: 8'
2689 Quarter Round
Lengths: 8', 12'
2024 Quarter Round
Length: 8'
2258 Quarter Round/Glass Bead
Length: 8' Length: 8'
2330 Stop
1 35/64"
1/4"
3/4"
3/4"
3/4"
3/4"1/2"
1/2"
13/32"
1/2"5/8"
5/8"
10
White Sandstone Brown
Available Colors
Garage Door Moulding
2497 Jamb*
Lengths: 7', 10'* Available in white
2149 Garage Door Stop*
Length: 12'* Available in sandstone and brown
2100 Garage Door Stop*
Length: 8'* Available in white
7526 Brick Mould WM180*
2"
1 1/4"
Lengths: 8', 10', 17'* Available in white, sandstone, brown
5 13/16"
11/16"
7/16"1 7/8" plus 1 1/4" flex
7/16"2" plus 1 1/4" flex
Garage Door Moulding
11Item availability is subject to change.
Royal Trimboard
Royal Trimboard
NOMINAL WIDTH
ACTUAL DIMENSIONS
PROFILE NUMBER
ACTUAL LENGTH
4/4 THICKNESS1" x 2" 3/4" x 1 1/2" 7832 8', 12'1" x 4" 3/4" x 3 1/2" 7834 8', 12'1" x 6" 3/4" x 5 1/2" 7835 8', 12'1" x 8" 3/4" x 7 1/4" 7836 8', 12'1" x 10" 3/4" x 9 1/4" 7837 8', 12'5/4 THICKNESS5/4" x 4" 1" x 3 1/2" 7840 10'5/4" x 6" 1" x 5 1/2" 7841 10'
1"3/4"5/8"
Royal S4S Trimboard is reversible and available in a smooth/smooth or smooth/woodgrain finish.
12
Sawing/Cutting• Royal Trim and Moulding can be cut
using the same techniques and tools as are used for wood
• Use standard woodworking equipment for most applications
• If using a power miter saw, a carbide-toothed blade with 80 teeth or more is recommended
Drilling• Drill in the same fashion as most hardwoods• Drill holes may require the removal of shavings periodically• High-speed steel bits are satisfactory for this process• Unless product is installed in lower temperatures (< 40°F) pre-drilling is
typically not required
Nailing• Use 6d and 8d galvanized nails• Place nails 12-in on center, approximately 3/4-in from
each edge• Pre-drilling is required at temperatures of 40˚ F or below• Royal Moulding and Trim can also be installed using a
pneumatic nailer, with stainless steel or painted head screws or with construction grade adhesives
Fastening:• Use fasteners designed for wood trim and wood siding (thinner shank,
blunt head, full round head) with trimboard• Use only fasteners intended for exterior use such as stainless steel or hot-
dipped galvanized.• DO NOT USE staples, small brads and wire nails• Fasteners should be long enough to penetrate the solid wood substrate a
minimum of 1-1/2 in.• Use two fasteners per every framing member for trimboard applications• Trimboards 12 in. or wider as well as sheets will require additional
fasteners• Fasteners must be installed no more than 2 in. from the end of each board• Trimboards should be fastened into a flat, solid substrate• Fastening trim boards into hollow or uneven areas must be avoided
Installation Tips
13
Gluing• To reduce or eliminate open joints, pipe glue or PVC
pipe cement is recommended • Temperature variations will cause PVC moulding to
expand and contract• It is highly recommended to splice (scarf) and/or
miter all joints
Painting• Royal Moulding and Trim requires no painting
for Rot Free protection.• 100% acrylic latex paints can be used to
achieve custom finishes• For darker custom colors (colors that fall
within the lightness (L) value of 56 to 0, with 100 being white and 0 being black), the use of heat-reflective paint is required.
Cleaning• Royal Moulding and Trim can be cleaned using any of
the recommended household cleaners listed below; however, glass cleaner has been shown to be best at keeping the finish intact
• Recommended cleaners: Windex, 409 Glass and Surface Cleaner, Spic & Span Cinch, Fantastik All Purpose, etc.
• Apply the cleaning solution and immediately wipe dry for best results
• Avoid harsh cleaners with glycol ethers, ethanol type solvents and/or isopropyl alcohol as they can soften the PVC finish if left on for several minutes
Additional Tips• Typically a paintable exterior high quality acrylic latex caulk is
recommended• When adhering Royal Trim and Moulding to wood a construction type
adhesive may be used• Royal Trimboard should always be stored in a flat level position
14
Product Cross Reference
Backband Casing .....................................2590 ......................4Base Cap ..................................................2450 ......................9Base WM623 ...........................................7527 ......................7Beaded Planking ......................................9734 ......................7Bed Mould ................................................2598 ......................8Brick Mould Kit ........................................7526 ......................4Brick Mould WM180 ...............................7526 ............... 4, 10Colonial Casing ........................................2355 ......................9Crown .......................................................2435 ......................8Door Frame Jamb ....................................7181 ......................5Drip Cap ...................................................2449 ......................5Exterior Planking .....................................2352 ......................7Flat Utility Trim ........................................2709 ......................6Florida Brick Mould .................................7252 ......................4Garage Door Stop ....................................2100 ....................10Garage Door Stop ....................................2149 ....................10Jamb ........................................................2497 ....................10Lattice ......................................................2018 ......................9Outside Corner ........................................7719 ......................9Quarter Round .........................................2024 ......................9Quarter Round .........................................2689 ......................9Quarter Round/Glass Bead......................2258 ......................9Rams Crown ............................................7158 ......................8Royal Trimboard............................................All ....................11Scotia/Cove ..............................................2021 ......................9Shingle Mould ..........................................2599 ......................9Shingle Mould ..........................................7901 ......................8Sill Nose ...................................................7118 ......................5Stop ..........................................................2150 ......................6Stop ..........................................................2330 ......................9Trimplank 1x4 ..........................................7318 ......................6Trimplank 1x6 ..........................................7311 ......................6Window Sill ..............................................7117 ......................5
Product Name Item Number Page
15Item availability is subject to change.
How to Place a Special Order
1. Browse our catalog and select the desired profiles.
2. Carefully measure to determine the needed amount of moulding.
3. Complete the form below and provide it to any associate in your local store.
Today’s Date: ______________________________________
Store Number: _____________________________________
Store Associate Name: _____________________________
Customer Name: __________________________________
Item 1
Model #: __________ Qty: _____ Color: _______________
Product Description: _______________________________
Promised Ship Date: _______________________________
Item 2
Model #: __________ Qty: _____ Color: _______________
Product Description: _______________________________
Promised Ship Date: _______________________________
Item 3
Model #: __________ Qty: _____ Color: _______________
Product Description: _______________________________
Promised Ship Date: _______________________________
Item 4
Model #: __________ Qty: _____ Color: _______________
Product Description: _______________________________
Promised Ship Date: _______________________________
Item 5
Model #: __________ Qty: _____ Color: _______________
Product Description: _______________________________
Promised Ship Date: _______________________________