CREFORM PLACON® WIDE *”PLACON” is a special term for plastic conveyor from CREFORM.
2
- Steady flow- No metal chipping- Low noise- Chromium-free- Rich variety of wheels
Features:
Internal structure
Axle(Stainless steel)
Conveyor Clip(Plastic)
Slide(Plastic)
Conveyor Track(Steel)
Wheel(Plastic)
Wide plastic wheel
Side guide
Wheel setsEach part is easily assembled and dismantled. This allows easy part replacement and cleaning.
Assembling wheel set Inserting wheel set into track
Various combinations of wheels are available.
Conductive wheel usefor ESD structure
Antistatic wheel use for better rolling
PWA PWB PWC
Three wheel shapesThree wheel shapes Two colours
Conductive, mild rollingAntistatic, better rolling* Surface electrical resistance of conductive wheel : 1x106 Ω or less
Both side use
C
M
Y
CM
MY
CY
CMY
K
プラコンkaihen3-2.pdf 1 2015/03/11 10:09:47
Specifications of CREFORM PLACON® WIDE
3
Dimensions
Basic information
Unit: mmPWA typeWith straight wheels, multiple purpose Ideal for standard useEnd clip not inclusive
ø 41
88,6
71,6
36
(48)
PWA1 PWA2
ø 41
Unit: mmPWB typeWith tapered wheelsIdeal for deformed container by aging End clip not inclusive
ø 37,4
88,6
71,6
36 48,3
PWB1 PWB2
Unit: mmPWC typeWith thin straight wheelsIdeal for workpiece without container End clip not inclusive
ø 18
88,6
71,6
(40) 36
PWC1 PWC2
Outer diameterof wheel
Between axles
Length
Colourof wheel
WhiteBlackWhiteBlackWhiteBlack
between Axles(mm)
43
19
Part number
PWA1-**** PWA2-****PWB1-****PWB2-****PWC1-****PWC2-****
Wheelmaterial
PEPPPEPPPEPP
Note
AntistaticESD
AntistaticESD
AntistaticESD
Weight per meter(g/m, approx.)
275027902680274025502590
Outer dia. of wheel (mm)
Ø41
Ø18
PE = Polyethylene, PP = Polypropylene, ESD = Electro-Static Discharge
C
M
Y
CM
MY
CY
CMY
K
プラコンkaihen3-2.pdf 4 2015/03/11 10:09:54
CREFORM PLACON® WIDE Accessories
93,3 110
41
28
Material: SteelWeight: 427 g
Material: SteelWeight: 475 gEF-2065C EF-2065DW
End mount With drop stop
41
93,3 110
EF-2065D EF-2067CBWith blade stop To create angle
Material: SteelWeight: 347 g
Material: SteelWeight: 417 g
How to remove a mount safely
4
Track mount fitted on ø28mm pipe
28
93,3 11028
41
108
93,227,2
43,3
40,9
Once you put a conveyor track mount on pipe, it will be fixed securely. To remove it safely, please insert a hard stick (e.g. allen key) into a gap between the pipe and the mount and lift the mount slowly using lever principle.
EF-2065ETrack union
Material: SteelWeight: 712 g
41
93,3 124,3
110
EF-2065GIntermediate mount
Material: SteelWeight: 345 g
41
93,3 108
28
28
2828
2828
C
M
Y
CM
MY
CY
CMY
K
プラコンkaihen3-2.pdf 5 2015/03/11 10:09:58
CREFORM PLACON® WIDE Accessories
5
Track mount fitted on ø28mm metal joint
Material: SteelWeight: 435 g
Material: SteelWeight: 481 gEF-2066C EF-2066DW
End mount With drop stop
41
93,3 110
34
69,2
41
93,3 110
EF-2066D EF-2066DCWith high blade stop With round blade stop
Material: SteelWeight: 439 g
Material: SteelWeight: 433 g
EF-2066E EF-2066GTrack union for intersection Intermediate mount
Material: SteelWeight: 336 g
Material: SteelWeight: 712 g
How to use EF-2066 series
93,3 110
41
34
146,6 R5
2,334
10893,2
40,9
41
93,3 127,3
11033,4
41
93,3 108
EF-2066 series are designed to fit on the HJ/HEJ joint in combination with EF-2068 as the photo on left side. When you desire to use them directly on 28mm pipe, please put two EF-2068 beneath the mount, as the illustration on right side. (EF-2065 series are recommended for 28mm pipe.)
EF-2066C/DWEF-2066C/DW
EF-2068
ø28
28 32 28 32
28 3228 32
28 32 28 32
C
M
Y
CM
MY
CY
CMY
K
プラコンkaihen3-2.pdf 6 2015/03/11 10:10:02
CREFORM PLACON® WIDE Accessories
6
28 32
42
4242
Track mount fitted on ø42mm metal Joint
Adapters
Material: SteelWeight: 427 g
Material: SteelWeight: 475 gEL-2066C EL-2066DW
End mount With drop stop
93,2163,6
40,9 2,349,7
108
163,6
49,7
40,993,2
2,3
49,8
46,9
108
EF-2068 EF-2069Adapter for ø28mm Adapter for ø32mm
Material: SteelWeight: 55 g
Material: SteelWeight: 43 g
EL-2068 How to use EF-2069Adapter for ø42mm
Material: SteelWeight: 86 g
3028,5
26
92,531,9
26
EF-2069 is designed to use EF-2066 series with 32 mm pipe. Please put one EF-2069 beneath the mount, as the photo.
How to use EL-2066 seriesEL-2066C and DW are designed to fit on the LJ/LEJ joint in combination with EL-2068, as the illustration on left side. When you desire to use them directly on 42mm pipe, please put two EL-2068 between the pipe and the mount, as the illustration on right side.
3,2
32,649,8
49,5
37
EL-2066C/DW
ø42
EL-2068
EL-2066C/DWEL-2066C/DW
EL-2068
ø42
EF-2066 seriesEF-2066 series
EF-2069
ø32
EF-2069
ø32
C
M
Y
CM
MY
CY
CMY
K
プラコンkaihen3-2.pdf 7 2015/03/11 10:10:04
CREFORM PLACON® WIDE Accessories
7
30,5
2112
20,5
66
109,4
93,2
59,140,9 2,3
Other Accessories
Material: AluminiumWeight: c.a. 1400 gLength: 2400 mm
Material: AluminiumWeight: 96 gPGRA-2400 EF-2078A
Side guide Connector for side guide
EF-2073K EF-2074ESD-conveyor track End clip for PW series
Material: PolypropyleneWeight: 4,8 g
Material: SteelWeight: 1530 g/mLength: 2400 mm
88,674,6
36
87,6
35
172
EF-2065HBEnd mount
Material: SteelWeight: 288 g
10893,3
41
Tabs on the end of mount
EF-2065G, EF-2065HB and EF-2066G have two tabs on both sides of one end.
By bending them down, the mounted track can be prevented from unex-pected coming-off.
EF-2065HATrack union
Material: SteelWeight: 280 g
How to combine two PGRA rails
To combine two PGRA rails, you can use EF-2078A.
Put two rails on EF-2078A as the seam comes to the middle of the mount.
And fasten two setscrews securely.
41
93,3 108
C
M
Y
CM
MY
CY
CMY
K
プラコンkaihen3-2.pdf 9 2015/03/11 10:10:09
Technical Data
Flexural strength Test temperature: 26̊C
PW series
PGRA
Wheel strength
lateral strength
Test temperature: 26̊C
Load
900 mm
Load
90 mm
* Please note that these are calculated values based on the minimum test value.
Part number Proportional limit Flexurein case of 15 kgf load
1.60kN { 164kgf} Approx. 0.7mm1.50kN { 153kgf} Approx. 0.7mm1.62kN { 165kgf}
1.03kN { 105kgf}
Approx. 0.7mm
PWA* - ****
PWB* - ****
PGRA - 2 4 0 0
PWC* - ****
Part number Proportional limit per wheel0.79kN { 80kgf}0.69kN { 70kgf}0.69kN { 70kgf}0.69kN { 70kgf}0.65kN { 70kgf}0.59kN { 66kgf}
PWA1 - ****
PWA2 - ****
PWB1 - ****
PWB2 - ****
PWC1 - ****
PWC2 - ****
Part number Proportional limit 270 N { 28kgf}EF-2078A
8
Lateral load
Fixed surface
900 mm
Load
90 mm
C
M
Y
CM
MY
CY
CMY
K
プラコンkaihen3-2.pdf 3 2015/03/11 10:09:48
Technical Data
9
Inclined conveyor example
Point for design
W
FPulley
* Please note that these are calculated values based on the minimum test value.
Starting resistance
Pulling speed: 250 mm/minCoefficient of friction: µ = F / WF: Pulling forceW: Load
Note: Coefficient of friction µ is the value in case of 5 to 20 kg load. Our product PT-9 is used for the container.
°1
5.71
1000mm
Note: To make 1 degree inclination, as above, it requires 17.5mm height per 1000mm horizontal distance (not conveyor length).
Angle of inclination for starting
W=5kg
θ
WTray made of PP
1000 mm
Note: Height h in the table at right corresponds to the horizontal length of 1000 mm.
Our product PT-9 is used for the container.
h
* The conditions of weight, bottom shape, and material of the workpiece can affect the speed.Please make a trial of flowing to adjust the incline based on the result.
Part numberWithout PP tray With PP tray
θ h(mm)
θ h(mm)
1,3 23,0 0,9 16,02,6 46,0 1,8 32,01,3 23,0 0,9 16,02,6 46,0 1,8 32,01,9 33,0 1,5 26,06,4 112,0 4,1 72,0
PWA1 - ****
PWA2 - ****
PWB1 - ****
PWB2 - ****
PWC1 - ****
PWC2 - ****
Part number0,03 - 0,040,04 - 0,06
0,05 - 0,080,04 - 0,05
0,09
0,04 - 0,05
PWA1 - ****
PWA2 - ****
PWB1 - ****
PWB2 - ****
PWC1 - ****
PWC2 - ****
C
M
Y
CM
MY
CY
CMY
K
プラコンkaihen3-2.pdf 2 2015/03/11 10:09:47
Appendix I: Spare parts
Part numberCompatible typeWheel diameterBetween axles
Components
Weight
PWA-43PWA1
ø 41 mm43 mm
4 x EF-2054A PE2 x EF-2056F PP4 x EF-2072 SUS
ca. 188 g
PWA-43 EBLPWA2
ø 41 mm 43 mm
4 x EF-2054A PP EBL2 x EF-2056F PP EBL4 x EF-2072 SUS
ca. 192 g
Part numberCompatible typeWheel diameterBetween axles
Components
Weight
PWB-43PWB1
ø 41 mm43 mm
4 x EF-2054B PE2 x EF-2056F PP4 x EF-2072 SUS
ca. 184 g
PWB-43 EBLPWB2
ø 41 mm 43 mm
4 x EF-2054B PP EBL2 x EF-2056F PP EBL4 x EF-2072 SUS
ca. 185 g
Part numberCompatible typeWheel diameterBetween axles
Components
Weight
PWA-19PWC1
ø 18 mm19 mm
6 x EF-2054C PE2 x EF-2056G PP6 x EF-2072 SUS
ca. 106 g
PWC-19 EBLPWC2
ø 18 mm 19 mm
4 x EF-2054C PP EBL2 x EF-2056G PP EBL4 x EF-2072 SUS
ca. 106 g
10
Wheel sets
C
M
Y
CM
MY
CY
CMY
K
プラコンkaihen3-2.pdf 10 2015/03/11 10:10:10
Appendix II: Parts number information
Part numberCompatible type
DimentionsMaterialWeight
EF-2054A PEPWA1
ø 41 x 73,6 mmAntistatic PEca. 38,6 g
EF-2054A PP EBLPWA2
ø 41 x 73,6 mmConductive PP
ca. 39 g
EF-2054B PEPWB1
ø 41 x 73,6 mmAntistatic PEca. 37,6 g
EF-2054B PP EBLPWB2
ø 41 x 73,6 mmConductive PP
ca. 37,5 g
EF-2054C PEPWC1
ø 18 x 73,6 mmAntistatic PEca. 11,4 g
EF-2054A PP EBLPWA2
ø 41 x 73,6 mmConductive PP
ca. 39 g
EF-2056F PPPWA1, PWB1
171,4 x 12,2 x 6 mmAntistatic PPca. 7,7 g
EF-2056F PP EBLPWA2, PWB2
171,4 x 12,2 x 6 mmConductive PP
ca. 8,2 g
EF-2056G PPPWC1
111,4 x 12,2 x 6 mmAntistatic PPca. 5,0 g
EF-2056G PP EBLPWC2
111,4 x 12,2 x 6 mmConductive PP
ca. 5,3 g
EF-2072 SUSPWA/PWB/PWCø 3 x 84,6 mm
SUSca. 4,6 g
Part numberCompatible type
DimentionsMaterialWeight
Part numberCompatible type
DimentionsMaterialWeight
Part numberCompatible type
DimentionsMaterialWeight
Part numberCompatible type
DimentionsMaterialWeight
Part numberCompatible type
DimentionsMaterialWeight
11
Wheels
Slides
Axle pin
PE = Polyethylene, PP = Polypropylene
C
M
Y
CM
MY
CY
CMY
K
プラコンkaihen3-2.pdf 8 2015/03/11 10:10:06
CREFORM PLACON® WIDEAll rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form by any means, electronic, mechanical, photocopying, recording or otherwise, without the written authorisation from CREFORM Technik GmbH.This catalogue supersedes all previous editions. Technical data is subject to change at any time.This catalogue was produced with care and attention but if you find any errors or omissions, we welcome suggestions for improvement so please don’t hesitate to let us know.If you would like more information about CREFORM Technik GmbH, please contact us, we will be more than happy to help.CREFORM® and CREFORM PLACON® are registered trademarks of Yazaki Kako Corporation.
Wolfsburger Straße 10D-34225 BaunatalTel. +49 (0) 5 61 47 59 67-0Fax +49 (0) 5 61 47 59 [email protected]
Technik GmbHCREFORM
11.11.2014
C
M
Y
CM
MY
CY
CMY
K
プラコン_裏表紙.pdf 1 2015/03/11 10:14:59