Incorporating Gekko IPJ Technology
GEKKO MODULARCOAL PLANTS
PREPARATION FOR THE FUTURE, NOW
BACKGROUND
The Gekko IPJ-C is an innovation developed specifically for the coal industry over a period in excess of
seven years. It is based on many years of successful operation of a very similar unit in the metalliferous
industry. The IPJ-C is a high capacity, low cost coal separation device that efficiently upgrades run-of-
mine coal to meet customer quality requirements. It can effectively process coal in the size range 30 x
0.075mm with high unit throughput capacity.
The IPJ-C does not use dense medium or any other form of consumable other than power and water.
Fig 1: IPJ-C Cross-section �����������
������������������������������������
������������������������������������
����������������������������������������������
������������������������������������������
������������������������������������������
������������������������������������
��������������������������������
������������������
����������������
����������������
INNOVATIVE PROCESSING
Proven materials handling and advanced technology drive Gekko’s production of modular plant
systems. Offering significant cost benefits and a low environmental footprint; Gekko process
designers customise self-contained high recovery plants for minimal start up capital, using high-quality
components and in-house expertise.
MODULAR PLANTS
“Fulfilling environmental obligations at the lowest total cost”
• Gekko designed
• Low water consumption
• Low energy
• Fast construction and installation
• Less height/infrastructure
• Cost 0.05 cents per tonne
The InLine Pressure Jig Coal Separator (IPJ-C) has been successfully tested using Australian coals
from the Hunter Valley and the Bowen Basin. Two sets of tests have been conducted: one using
600mm unit and one using a 1000mm diameter unit. Good results were obtained in both sets of tests,
with separating efficiency increasing considerably at the larger scale.
BENEFITS
GEKKO COAL R&D
Modular R&D skid designed for coal applications
GRAVITY MODULE ARRANGEMENT
• Australian technology
• Modular efficiency
• High productivity/returns
�������� � �� ���� ������������������� ������������������� �����������������
����������� ������������������ �����������������
���������������� ������������������� ��������������������������������������
������������� ������������������� �����������������������������������
����������
��������+61 8 9328 7200���� �����������������
���
��
��
��
��
��
��� � �� �� ��
����������
����
����
�
�������������������
���
��
��
��
��
��
��� � �� �� ��
����������
����
����
�
�������������������
���
��
��
��
��
��
��� � �� �� ��
������������
����
���
�������������������
Model/diameter 1500 2400 3500
Max. capability (t/h dry solids) 40 80 200
Max. feed size (mm) 30 30 30
Effective lower size (mm) 0.075 0.075 0.075
Installed power (kW) 1.5 2.2 3.2
Hutch water (m³/h) 7-36 21-54 35-70
Dry mass (kg) approx. 1900 3800 5300
IPJ MODELS
��������������������������������������������������������
GEKKO IPJ OPERATING PT