HMDX Jam Battery ReplacementShow you step by step how to replace the jambox battery that is past its charge cycle.
Written By: Prince Tendai Dzonga
HMDX Jam Battery Replacement Draft: 2017-02-08Guide ID: 36903 -
This document was generated on 2019-09-21 01:16:16 PM (MST).
© iFixit — CC BY-NC-SA www.iFixit.com Page 1 of 5
INTRODUCTION
Outline what you are going to teach someone how to do.
TOOLS:Soldering Iron (1)iFixit Opening Tools (1)Phillips #1 Screwdriver (1)
HMDX Jam Battery Replacement Draft: 2017-02-08Guide ID: 36903 -
This document was generated on 2019-09-21 01:16:16 PM (MST).
© iFixit — CC BY-NC-SA www.iFixit.com Page 2 of 5
Step 1 — Opening speaker
Use the plastic opening tool to pryoff the rubber cover at the bottom ofthe speaker.
Step 2 — remove rubber cover
Gently remove the rubber cover toexpose the screws. If necessary,poke holes through the glue residueto expose the screw heads.
HMDX Jam Battery Replacement Draft: 2017-02-08Guide ID: 36903 -
This document was generated on 2019-09-21 01:16:16 PM (MST).
© iFixit — CC BY-NC-SA www.iFixit.com Page 3 of 5
Step 3 — Remove screws
Once you have exposed the screws,use a #1 Phillips screwdriver toremove the four 9 mm screws.
It would be wise to use a magneticmat for the screws for safekeeping.
Step 4 — Exposing Battery
Once you've removed the screws,open the case slowly. The battery iscovered in blue packaging.
HMDX Jam Battery Replacement Draft: 2017-02-08Guide ID: 36903 -
This document was generated on 2019-09-21 01:16:16 PM (MST).
© iFixit — CC BY-NC-SA www.iFixit.com Page 4 of 5
To reassemble your device, follow these instructions in reverse order.
Step 5 — Removing Battery
Very gently remove the battery fromthe motherboard.
Step 6 — Remove battery attachments
Use a solder gun to remove the battery attachments from the motherboard.
HMDX Jam Battery Replacement Draft: 2017-02-08Guide ID: 36903 -
This document was generated on 2019-09-21 01:16:16 PM (MST).
© iFixit — CC BY-NC-SA www.iFixit.com Page 5 of 5