HMDX Jam Battery ReplacementShow you step by step how to replace the jambox battery that is past its charge cycle.

Written By: Prince Tendai Dzonga

HMDX Jam Battery Replacement Draft: 2017-02-08Guide ID: 36903 -

This document was generated on 2019-09-21 01:16:16 PM (MST).

© iFixit — CC BY-NC-SA www.iFixit.com Page 1 of 5

INTRODUCTION

Outline what you are going to teach someone how to do.

TOOLS:Soldering Iron (1)iFixit Opening Tools (1)Phillips #1 Screwdriver (1)

HMDX Jam Battery Replacement Draft: 2017-02-08Guide ID: 36903 -

This document was generated on 2019-09-21 01:16:16 PM (MST).

© iFixit — CC BY-NC-SA www.iFixit.com Page 2 of 5

Step 1 — Opening speaker

Use the plastic opening tool to pryoff the rubber cover at the bottom ofthe speaker.

Step 2 — remove rubber cover

Gently remove the rubber cover toexpose the screws. If necessary,poke holes through the glue residueto expose the screw heads.

HMDX Jam Battery Replacement Draft: 2017-02-08Guide ID: 36903 -

This document was generated on 2019-09-21 01:16:16 PM (MST).

© iFixit — CC BY-NC-SA www.iFixit.com Page 3 of 5

Step 3 — Remove screws

Once you have exposed the screws,use a #1 Phillips screwdriver toremove the four 9 mm screws.

It would be wise to use a magneticmat for the screws for safekeeping.

Step 4 — Exposing Battery

Once you've removed the screws,open the case slowly. The battery iscovered in blue packaging.

HMDX Jam Battery Replacement Draft: 2017-02-08Guide ID: 36903 -

This document was generated on 2019-09-21 01:16:16 PM (MST).

© iFixit — CC BY-NC-SA www.iFixit.com Page 4 of 5

To reassemble your device, follow these instructions in reverse order.

Step 5 — Removing Battery

Very gently remove the battery fromthe motherboard.

Step 6 — Remove battery attachments

Use a solder gun to remove the battery attachments from the motherboard.

HMDX Jam Battery Replacement Draft: 2017-02-08Guide ID: 36903 -

This document was generated on 2019-09-21 01:16:16 PM (MST).

© iFixit — CC BY-NC-SA www.iFixit.com Page 5 of 5