How to reportyour energy / CO2 datain the SEAP template?
Energy carriers
Sect
ors
& s
ub-s
ecto
rs
The Table A of the SEAP template helps you to summarize the key data related to your final energy consumption, i.e. the amount of electricity, heat/cold, fossil fuels and renewable energy consumed by the final
end-users as a commodity within your territory
Specify here for example the electricity consumed or oil used for space heating in the building sector
Specify here for example the fuel consumed and/or vehicle miles
travelled in the transport section
IMPORTANT: the sub-totals & totals per sector and per energy carrier are mandatory
fields
TABLE A: FINAL ENERGY CONSUMPTION
Energy carriers
Sect
ors
& s
ub-s
ecto
rs
The Table B summarises the quantity of CO2 (or CO2 equivalent) emitted as a result of the energy consumption within your local authority. Compared to the table A (final energy consumption), the emissions are reported in a
similar way.
1/ Report here the CO2 emission factors
2/ For each energy source, the CO2 emissions are calculated by multiplying the final energy consumption
(reported in table A) by the corresponding emission factors (reported in the orange frame)
TABLE B: CO2 (OR CO2 EQUIVALENT) EMISSIONS
The Tables C & D summarises the quantity of CO2 (or CO2 equivalent) emitted as a result of the energy production within your local authority.
1/ List the main plants or units (ETS excluded, ≤ 20 MWh) that provide heat/coldas a commodity to end-users within your territory
2/ Indicate what they produce
3/ Indicate what they consume
4/ Specify your emission factors and calculate corresponding CO2 emissions (mandatory)
5/ Calculate the totals (mandatory)
TABLE C: LOCAL ELECTRICITY PRODUCTION AND CORRESPONDING CO2 EMISSIONS
TABLE D: LOCAL HEAT/COLD PRODUCTION AND CORRESPONDING CO2 EMISSIONS
For more information:look at
the SEAP template instructions