Download - IBW
8/12/2019 IBW
http://slidepdf.com/reader/full/ibw 1/19
8/12/2019 IBW
http://slidepdf.com/reader/full/ibw 2/19
8/12/2019 IBW
http://slidepdf.com/reader/full/ibw 3/19
8/12/2019 IBW
http://slidepdf.com/reader/full/ibw 4/19
8/12/2019 IBW
http://slidepdf.com/reader/full/ibw 5/19
Typ UniRex® Power KW Flow rate
(water) l/h
URL-60 1,5 – 3,0 1500 – 2500
URL-80 2,2 – 5,5 1800 – 3000
URL-115 3,0 – 15,0 5000 – 13000URL-150 5,5 – 22,0 8000 – 17000
URL-200 15,0 – 30,0 18000 – 22000
URL-250 22,0 – 37,0 25000 – 55000
URL-280 30,0 – 45,0 30000 – 80000
URL-300 37,0 – 55,0 50000 – 90000
For specific fields of applications, the inline mixers
are also available in 3 stages. This means that 3 ro-tor-stator combinations are turned on subsequently.
As a standard, the rotor-stator combinations are
available in high/middle/low shear. Our machines
can be delivered also in sterile design with sterile
sealing systems. Material and surface in accordance
to FDA.
Seal:
Standard axial face seal, single operation, optionallyfor double operation. For blockage, product neutral
liquid is employed. As pressure transmitter, thermo-
siphon systems or controlled movement units are
available.
ibW Rührwerkstechnik GmbH
Im unteren Ried 16 • 75382 Althengstett
phone: +49(0)7051/930100 • fax: +49(0)7051/930102
eMail: [email protected] • http://www.ibw-ruehrer.de
Components that get in contact with the product are
made of stainless steel (1,4301), at request it can be
customized as 1,4571.
Fields of Application
Emulsions (liquid/liquid)
Suspensions (solid/liquid)Lyosoles (gas/liquid)
Homogenizing
Inline Dispersing Machines
UniRex® Inline dispersing machines for continuous
and batch processes. ibW inliner type UniRex® have
played an important part in the dispersing techno-
logy for many years.
Our popular models were optimized for a better efficiency in 2002. With an individual geometric de-
sign, the rotor-stator combination of UniRex® Inline
mixers can be adjusted to fit any kind of processing
and application.
8/12/2019 IBW
http://slidepdf.com/reader/full/ibw 6/19
UniRex® URC High Performance DispersingMachines for Discontinuing Mix Technology
For manufacturing finest dispersing and emulsion products with high long time stability
ibW Rührwerkstechnik GmbHIm unteren Ried 16D–75382 Althengstettphone: +49 7051/930100fax: +49 70 51 /93 01 02
http://www.ibw-ruehrer.deE-Mail: [email protected] Your competent partner for quality
The UniRex® URC
The advantage of the UniRex® URC lies in the robust and simpleconstruction.ibW supplies three products for the batch operation.
The machine elements that get in contact with the product are
available in 1.4301, 1.4404 and 1.4571.
The stator of the UniRex® URC mixers is either available in a hose pipe,
at three guiding shafts made of round bars or directly fixed at the
mounting flange.
The first two designs are for installation into the vessel from above or to
be lowered into an open or closed vessel. Both designs are available for
without pressure as well as under pressure operations and/or vacuum
respectively. For this purpose, there are various types of seals and sealunits with thermo siphon system available.
Rührwerkstechnik GmbH
The design with a rotor-stator directly at ate mountingflange is equipped with a gliding ring seal and issuitable for application independent of mountinglocation.
Optionally, the UniRex® URC mixers are offered
in the pharmaceutics design with electropolished surface Ra < 0.8 µm.
UniRex® URCwith rotor-stator mounting for eachdriving rod.
8/12/2019 IBW
http://slidepdf.com/reader/full/ibw 7/19
8/12/2019 IBW
http://slidepdf.com/reader/full/ibw 8/19
8/12/2019 IBW
http://slidepdf.com/reader/full/ibw 9/19
RotoRex ®
Pilot Beam Mixer
The operational area ranges from liquid to very viscous media,the special advantage is:
– High circulation
– No dust devils and sedimentation
– No air entry into the media
– No floating
– High suspension performance, intensive mixture in the turbine
– Even coverage of the entire container volume
– Overcoming pronounced flow anomalies
– No current crushers in the tank necessary
– Small power requirement
– Short mixing and process time
– Gentle product treatment due to short retention time
– High economy
– Also in explosion-proof design with Atex permission 94/9/EG
Technical Structure:
Depending on requirement profile, ibW works with or withoutstorage (PTFE support bearing) and seal in dip part. Therefore, the
RotoRex® Pilot Beam Mixer is applicable without any problems
also with strongly abrasive products. Depending on design, two
different series are available. With the standard version, the turbine
is led by three round bars. For products with an easy and fast
cleaning requirement, the turbine is hold by a shaft pipe. In this
shaft pipe, special seals between stator and agitator wave are set.
Thus, the penetration of the media between shank pipe and drive
shaft is prevented. All product-affected parts of theRotoRex® Pilot
Beam Mixer consist of 1.4301 alternatively of 1.4404 or 1.4571.
ibW Rührwerkstechnik GmbH
Im unteren Ried 16D–75382 Althengstettphone: +49 7051/930100fax: +49 70 51 /93 01 02
http://www.ibw-ruehrer.deE-Mail: [email protected] Rührwerkstechnik GmbH 0
4 5_
E__
0 4 0 6
The design takes place individually, in order to obtain respective
setting of tasks and achieving optimal results.
ibW Rührwerkstechnik GmbH stands for competent process
engineering consultation and high-quality mechanical engineering.
RotoRex® RR-105Turbine fixed via shaft pipe
RotoRex® asside agitator RRSK-350
8/12/2019 IBW
http://slidepdf.com/reader/full/ibw 10/19
Accessories:
– Supporting cross arm for IBC-Container, material: Steel, galvanized
– On/Off switch with integrated motor protection and
low voltage trigger (not with Ex-design)
– Safety type IP 55
– Fork lift shoes
– Handles
– Electric controlling, also in the Ex-design
– speed control via frequency converter or rotary current integral motor with integratedfrequency converter
– Alternative to the supporting cross arm: wall, bottom or driving support
– Ex-design with ATEX approval 94/9/EG
Vessel drawing:
ibW Rührwerkstechnik GmbHIm unteren Ried 16D–75382 Althengstettphone: +49 7051/930100fax: +49 70 51 /93 01 02
http://www.ibw-ruehrer.deE-Mail: [email protected]
RotoRex® RRC-115Conductive Beam Container Mixer
For all IBC-Container / the better alternative to the standard container mixers
RotorRex® RRC-115Conductive Beam Container Mixer without cross arm
S t a n d
0 9 / 0 4
On/Off switch
Rührwerkstechnik GmbH
8/12/2019 IBW
http://slidepdf.com/reader/full/ibw 11/19
RotoRex® RRC-115Conductive Beam Container Mixer
For all IBC-Container / the better alternative to the standard container mixers
Subject to technical changes
ibW Rührwerkstechnik GmbHIm unteren Ried 16D–75382 Althengstettphone: +49 7051/930100fax: +49 70 51 /93 01 02
http://www.ibw-ruehrer.deE-Mail: [email protected] Your competent partner for quality
R
R
R R
RRC-115-15 RRC-115-22 RRC-115-30 RRC-115-40
KW 1,5 2,2 3,0 4,0
r.p.m 3000 3000 3000 3000
Safety type IP 54 IP 54 IP 54 IP 54
Voltage (V) 230/400 230/400 230/400 400/690Frequency (Hz) 50 50 50 50
Turbine-Ø (mm) 115 115 115 115
Shaft length (mm) 920 920 920 920
Weight (kg) 18,2 22,8 27,5 31,8
The RotoRex®
is a further developed beam mixer, especially to meet the requirements set for mix tasks in
transport containers.
With the RotoRex®, the content is stirred up to the seams within the
shortest time. Thus, sediments and residues in the container
seams are avoided. The are of us reaches from low to high
viscose agents, the special advantages:
– High circulation power
– No air inlet into the agent
– Fits in perfectly due to 140 mm big container opening
– No flap mechanism which gets dirty or collects residues
– No foaming
– Very effective mixing, even with high viscose agents
– High suspension power, intensive mixing in the turbine
– Even coverage of the entire container content
– Overcoming distinct flow anomalies
– Low energy consumption
– Short mixing without sediments
– High economic efficiency
– Also in Ex-design with ATEX approval 94/9/EG
Rührwerkstechnik GmbH
8/12/2019 IBW
http://slidepdf.com/reader/full/ibw 12/19
Side Entry Mixer TurboRex® DRSKThe economical and professional solution for big vessels
The TurboRex® Side Entry Mixers
are designed for extensive mixing tasks in big vessels. Due to the side entry,an efficient performance is achieved and the work process simplified. In
addition, the bottom and top areas remain free.
Due to the short mixing shaft, the bending
strain remains low and thus the mixer can be
equipped with a smaller dimension. The asy-
mmetric flow enables to do without a flow
blocker.
Vessels with big diameter and relatively low
height, several mixers are attached outer
mantle of the vessel at a certain radial angle.
Thus, sediments are avoided to greater
extend.
Various sizes of mantling flanges enable the
usage with various vessel types. In combi-
nation of various types, you always achieve
the maximum flow rate.
Your competent partner for quality
ibW Rührwerkstechnik GmbHIm unteren Ried 16D–75382 Althengstettphone: +49 7051/930100fax: +49 70 51 / 93 01 02
http://www.ibw-ruehrer.deeMail: [email protected]
8/12/2019 IBW
http://slidepdf.com/reader/full/ibw 13/19
ibW Rührwerkstechnik GmbHIm unteren Ried 16D–75382 Althengstettphone: +49 7051/930100fax: +49 70 51 / 93 01 02
http://www.ibw-ruehrer.deeMail: [email protected]
TurboRex® – DRSKSide Entry Mixer by ibW
The high quiet running typical for ibW Mixers are achieved by reinforced and encased bearings and stablesteel bearing bars.
In order to meet any kind of mixing demands, there are different kinds of mixing elements. Optionally axialface seal for the side entry fitting is available. This has the entry directly at the fitting flange and thus thechange of the axial face seal is fast and easy. Via an additionally available standstill seal, the axial face sealcan be replaced with full vessel.
Components that get in contact with the product are made of stainless steel 1,4301or 1,4571. For usagewith aggressive products, it is possible to coat the components that get in contact with the product withhard rubber (Emoxit).
The standard paint of all mixers is RAL 6011, Reseda green; other colors can be used at request.
There is a choice of 2-pole, 4-pole, and 6-pole IEC motors, in general produced in IP54. Optionally it canbe produced in IP55 with Ex-protection in Eexell-T3 or EEXdell-T4.
M O D E L STurboRex®
Meas. A Ø (mm)
Meas. B Ø (mm)
Meas. C Ø (mm)
Meas. D Ø (mm)
Meas. E Ø (mm)
Max. mixing element
Power
DRSK-40
265
300
30
710
712300
1,0-3,0
DRSK-50
265
300
30/40
710
712350
4,0-9,0
DRSK-60
300
350
50
850
820400
11,0-15,0
DRSK-70
350
400
80
1000
940600/800
18,5-37
Subject to technical changes
8/12/2019 IBW
http://slidepdf.com/reader/full/ibw 14/19
TurboRex® Two-Hand MixersType DRH with rotary current gear / type DRHL with pneumatic gear
The TurboRex® Hand Mixer From the series DRH and DRHL are all purpose mixers which are
designable to be fitted for special mixing dispersing applications.
For the gear there are the rotary current gear and pneumatic gear alterna-tives. Depending on the field of application, the rotary current gear can bedelivered in Ex- or Exd-Design.
The two handles on the sides enable an easy operation. The mantle of the rotary currentgear can be equipped with an on/off switch with a CEE-plug. All gears are fitted with areinforced and encased bearings. For heavy industrial usage, all mixers can be equipped
with an additional bearing. Thus, the mixer shaft is protected from damages in roughhandling and the shaft length can be extended to 1000 mm in total.
Optionally we offer an integrated 300 mm protection bushing for the shaft.
In order to meet any kind of mixing demands, there are different kinds of mix-ing elements.
Subject to technical changes *PA = Propeller with outer ring
The standard paint of all mixers is RAL 6011, Reseda green.
Components that get in contact with the product are made of stainless steel 1,4301, at requestit can be customized as 1,4571. Other coatings are possible as well.
ibW Rührwerkstechnik GmbHIm unteren Ried 16D–75382 Althengstettphone: +49 7051/930100fax: +49 70 51 /93 01 02
http://www.ibw-ruehrer.deeMail: [email protected] competent partner for quality
R O
R
C U R R E
DRH-10 DRH-20 DRH-30 DRH-40 DRH-50
KW 0,37 0,55 0,75 1,1 1,5
R/min 1500 1500 1500 1500 1500
Protection IP 54 IP 54 IP 54 IP 54 IP 54
Voltage (V) 230/380 230/380 230/380 230/380 230/380
Frequency (Hz) 50 50 50 50 50
Shaft-Ø (mm) 20 20 20 25 30
Shaft length (mm) 650 650 650 650 650
Mixing element PA* 150 PA* 150 PA* 150 PA* 150 PA* 150
Weight (kg) 12 15,2 18,5 21,3 26,1
8/12/2019 IBW
http://slidepdf.com/reader/full/ibw 15/19
TurboRex® – DRHLTwo-Hand Mixer with pneumatic gear
TurboRex® – DRHPLSingle-Hand Mixer with pneumatic gun mixer
All pneumatic motors used are special gears for mixing. The free movable blades are adjusted automaticallyin case of wear out.
The inlet and outlet air supply is via a screw thread connection based on inch at the housing of the gear.Optionally, a locking screw can be integrated to enable a continuous control of the speed. For the exhaustair damping there are various sound absorbers available.
P
E U M
I C
P
E U M
I C
The TurboRex® DRHPL is equipped with a robust industrial pneumatic gun motor with aplanetary gear. The mixing shaft is connected directly to the shaft.
With a switch, the model DRHPL-10 can be switched to left or right revolving.The pressure meter at the handle of the gun enables a continuous regulation of the speed.For both models, a second handle option is possible.
ibW Rührwerkstechnik GmbHIm unteren Ried 16D–75382 Althengstettphone: +49 7051/930100fax: +49 70 51 /93 01 02
http://www.ibw-ruehrer.deeMail: [email protected]
Other dimensions at request. Subject to technical changes.
* PA = Propeller with outer ring
DRHPL-10 DRHPL-20
KW 0,33 0,44
R/min 1800 500
Air consumption (L/h) 480 462
Max. operation pressure(bar) 6,3 6,3
Shaft (mm) 20 20
Shaft length (mm) 650 850
Mixing element KP125 PA* 150
Weight (kg) 6 9,8
KP 125
FoldingPropeller
KW
R/min
Air consumption (L/h)
Shaft (mm)Shaft length (mm)
Weight (kg)
DRHL-20
0,58
3000
730
25650
13
DRHL-30
0,68
4000
830
25650
15,2
DRHL-09
0,27
1000
500
20650
8
DRHL-10
0,42
2000
630
20650
10,1
8/12/2019 IBW
http://slidepdf.com/reader/full/ibw 16/19
Container and Barrel Agitators
With the ibW TurboRex® DRF the medium can be mixed directly in a
60-220 litre barrel through the bunghole. The mounting flange is equip-
ped with two lifting handles. The reinforced and enclosed bearingsensure a long service life. All barrel agitators are equipped with a folding
propeller type KP125 as a standard feature. The mounting flange, shaft
and agitator unit are made of stainless steel type 1.4301. Special mate-
rials are available upon request.
TurboRex®
DRF-10
Folding propeller KP125
Pricing: Payment within eight days with 2% discount, 30 days net, plus VAT
We supply a wide range of solutions for other applications(e.g. installations of agitators in various vessel covers)
Barrel agitator type TurboRex® DRF
ibW Rührwerkstechnik GmbHIm unteren Ried 16D–75382 Althengstettphone: +49 7051/ 930100fax: +49 70 51 / 93 01 02http://www.ibw-ruehrer.deeMail: [email protected] Your competent partner for quality
Type DRF-09 DRF-10 DRF-20
Capacity (KW) 0,12 0,37 0,55
Frequency (Hz) 50 50 50
Voltage (V) 230/380 230/380 230/380
Protection class IP 54 IP 54 IP 54
Speed (U/min) 1500 1500 1500
Shaft diameter (mm) 20 20 20
Shaft length (mm) 800 800 800
Agitator unit KP125 KP125 KP125
Mount 2" bunghole 2" bunghole 2" bunghole
Weight (kg) 9,5 12,3 13,8
Price (Euro + VAT) 746,– E 836,– E 911,– E
Accessoires
Protection class IP55 41,– E
Explosion protection EExell-T3 90,– E
Drive Compressed air motor upon request
8/12/2019 IBW
http://slidepdf.com/reader/full/ibw 17/19
Container Agitators Typ TurboRex® DRC and DRGCWith the ibW TurboRex® DRC/GC container agitators the medium can be mixed directly in 500
- 2,500 litre containers. A support mount with reinforced and enclosed bearings and a support
frame are available as accessoires and recommended for each agitator.
All agitators are available as fast-running (DRC) and slow-running (DRGC) versions and fitted
with a propeller type P150 as a standard feature. Other agitator units are available upon request.
On the standard version the shaft and agitator are made of stainless steel type 1.4301. Special
materials are, however, available upon request.
Various agitator securing fittings are available
for different container types. Various support
frames and a threaded seal are also available.
The threaded seal can be supplied with a sup-
port mount.
TurboRex®
DRC-20 withthreaded seal
Fast-running agitators DRC Slow-running agitators DRGC
Type DRC-20 DRC-30 DRC-40 DRGC-10 DRGC-20 DRGC30
Capacity (kw) 0,55 0,75 1,5 0,55 0,75 1,5
Voltage (V) 230/400 230/400 230/400 230/400 230/400 230/400
Frequency (Hz) 50 50 50 50 50 50
Protection class IP 54 IP 54 IP 54 IP 54 IP 54 IP 54
Speed (U/min.) 1500 1000 1000 250 250 250
Shaft diameter (mm) 25 30 35 25 30 35
Shaft length 920 920 920 800 920 920Agitator unit P150 P150 P150 P150 P150 P150
Weight 18,5 21,3 38,8 23,6 21,3 38,8
Price (Euro zzgl. MwSt.) 501,– E 612,– E 644,– E 734,– E 814,– E 899,– E
Support frame
Support mount with enclosed an reinforced bearings
Protection class IP 55
Explosion protection EExell-T3
Variable gear motor with manual wheel, approx. 37-357 U/min.
Low speed approx. 50 rpm
Folding propeller KP250 (Shaft length 800 mm)
Folding propeller KP300 (Shaft length 800 mm)
Alternative drive with compressed air motor
Threaded seal DN 150Pricing: Payment within eught dayswith 2% discount, 30 days net, plus VAT
235,– E
298,– E
41,– E
135,– E
–
–
178,– E
–
upon request
168,– E
235,– E
337,– E
41,– E
135,– E
294,– E
197,– E
–
210,– E
upon request
168,– E
It is important to indicate containertype, size and if needed the diameter of bunghole on your order!
ibW Rührwerkstechnik GmbHIm unteren Ried 16D–75382 Althengstettphone: +49 7051/930100fax: +49 70 51 /93 01 02
http://www.ibw-ruehrer.deeMail: [email protected]
Accessory range
Support frame
8/12/2019 IBW
http://slidepdf.com/reader/full/ibw 18/19
8/12/2019 IBW
http://slidepdf.com/reader/full/ibw 19/19