Download - KAPITELG
-
Christian Dalloz Holding Deutschland GmbH & Co. KG, D-95015 Hof, P.O.Box 16 46, Phone +49/92 81/83 02-0, Fax +49/92 81/36 26, [email protected] G 105.2
003
Technical specifications are subject to change without notice.
Safety in Action Fall Protection Systems
MultiRail
Horizontal safety railAvailable in lengths from 200 - 6000 mm.Mounting distance max. 6000 mm
Stainless SteelWeight: 2,7 kg/mPart No. 17488
Standard length 6000 mmWeight: 16,2 kg/eachPart No. 19146
ConnectorFor connecting individual rail sections.
Anodized AluminiumWeight: 0,5 kg/eachPart No. 17332
Rail end-stop, without exitTo prevent the glider from running outunintentionally.
Stainless Steel/Anodized AluminiumWeight: 0,4 kg/eachPart No. 17404
Rail end-stop, with exitTo prevent the glider from running outunintentionally. Removal of the glider bypressing the opening mechanism. Attention:Not suitable for trolleys.
Stainless Steel/Anodized AluminiumWeight: 0,6 kg/eachPart No. 17861
-
Christian Dalloz Holding Deutschland GmbH & Co. KG, D-95015 Hof, P.O.Box 16 46, Phone +49/92 81/83 02-0, Fax +49/92 81/36 26, [email protected] 2 05.2
003
Technical specifications are subject to change without notice.
Safety in Action Fall Protection Systems
Summarising of the smallest possible bending radius in mm forthe anchoring device MultiRail
-
Christian Dalloz Holding Deutschland GmbH & Co. KG, D-95015 Hof, P.O.Box 16 46, Phone +49/92 81/83 02-0, Fax +49/92 81/36 26, [email protected] G 305.2
003
Technical specifications are subject to change without notice.
Safety in Action Fall Protection Systems
MultiRail
Horizontal bendFor horizontal use as corner turn. R = 80 mm,90 Angles from 30 to 150 are available onrequest.
Anodized AluminiumWeight: 0,9 kg/eachPart No. 17331
Vertical bendFor vertical use as corner turn. R = 80 mm,90 Angles from 30 to 150 are available onrequest.
Anodized AluminiumWeight: 0,9 kg/eachPart No. 17330
Horizontal track changeFor safe change of travel in two directions.The rail systems connected to the unit mustmeet the unit at 90 angle.
Stainless Steel/Anodized AluminiumWeight: 2,7 kg/eachPart No. 20449
Horizontal track change with bracketFor safe change of travel in two directions.The rail systems connected to the unit mustmeet the unit at 90 angle. To be used whenthe anchorage point to the buildingconstruction is right under the change. Easymounting with bracket (Part.No. 17489).
Stainless steel/Anodized aluminiumWeight: 3,2 kg/eachPart No. 21967
-
Christian Dalloz Holding Deutschland GmbH & Co. KG, D-95015 Hof, P.O.Box 16 46, Phone +49/92 81/83 02-0, Fax +49/92 81/36 26, [email protected] 4 05.2
003
Technical specifications are subject to change without notice.
Safety in Action Fall Protection Systems
BracketThe rail can move freely in the brackets (notsubject to any constraint). Bott diameter forfixing: M 12. Screw-on surface parallel to therail.
Stainless SteelWeight: 0,4 kg/eachPart No. 17489
BracketThe rail can move freely in the brackets (notsubject to any constraint). Bott diameter forfixing: M 12. Screw-on surface at right-anglesto the rail.
Stainless SteelWeight: 0,4 kg/eachPart No. 17112
MultiRail
BracketWith teflon easy-slide ribbons. For over headinstallation, use screw M12. Projection L=max. 200 mm. The rail slides freely in the bra-cket. When ordering, state projection L.
Stainless steelWeight: 0,4 kg/eachPart No. 21031
BracketWith teflon easy-slide ribbons. For over headinstallation, use screw M12. Projection L=max. 200 mm. The rail slides freely in the bra-cket. When ordering, state projection L.
Stainless steelWeight: 0,4 kg/eachPart No. 21677
-
Christian Dalloz Holding Deutschland GmbH & Co. KG, D-95015 Hof, P.O.Box 16 46, Phone +49/92 81/83 02-0, Fax +49/92 81/36 26, [email protected] G 505.2
003
Technical specifications are subject to change without notice.
Safety in Action Fall Protection Systems
MultiRail
Tube clampWith teflon easy-slide ribbons. The rail slidesfreely in the bracket. Projection L = 80-200mm. Complete with mounting screws. Whenordering, state projection L and diameter D.
Stainless steelWeight: depending on sizePart No. MR-BS-1AUSL-
SupportAs subconstruction for bracket. Completewith mounting elements for bracket. Heighth = max. 275 mm. When ordering, stateexact height h required.
Hot-dip galvanized steelWeight: depending on sizePart No. 20278
SupportAs subconstruction for bracket. Completewith mounting elements for bracket. Heighth = max. 540 mm. When ordering, stateexact height h required.
Hot-dip galvanized steelWeight: depending on sizePart No. 20768
BracketsWith teflon easy-slide ribbons. For mountingon a bend overhead; fixing screws M12,projection L=max.200 mm. State projectionL when ordering.
Stainless steelWeight: 0,4 kg/eachPart No. 23209
-
Christian Dalloz Holding Deutschland GmbH & Co. KG, D-95015 Hof, P.O.Box 16 46, Phone +49/92 81/83 02-0, Fax +49/92 81/36 26, [email protected] 6 05.2
003
Technical specifications are subject to change without notice.
Safety in Action Fall Protection Systems
MultiRail
Closed gliderWith sliding inserts (made of polyamide) andhook-on ring.
Stainless SteelWeight: 0,4 kg/eachPart No. 17407
Openable gliderWith sliding inserts (made of polyamide) andhook-on ring. Can be attached and removedat any point.
Stainless SteelWeight: 0,6 kg/eachPart No. 17792
Wheeled trolleyTo be used when a retractable lanyard (fallarrest block) is connected to the system. Therail system should always be installed abovethe user including chain link. Attention: it isnot possible to use it for narrow curves!
Stainless SteelWeight: 1,3 kg/eachPart No. 20386
-
Christian Dalloz Holding Deutschland GmbH & Co. KG, D-95015 Hof, P.O.Box 16 46, Phone +49/92 81/83 02-0, Fax +49/92 81/36 26, [email protected] G 705.2
003
Technical specifications are subject to change without notice.
Safety in Action Fall Protection Systems
MultiRail
LabelFor fall arrester system type MultiRail.Normally one label per system included.
Part No. 21466