TTS has developed and patented a revolutionary mooring system which replaces
mooring winches, capstans and wrapping drums as well as the standard bollards
conventionally used for mooring. The system makes a saving on deck space but,
more significantly, mooring operations are made easier and safer than with the
standard methods currently available. The system is available in both hydraulic
and electric versions.
Winch bollards
MARINE
SHIPBOARDHANDLINGEXCELLENCE
www.ttsgroup.com
WINCH BOLLARDS
www.ttsgroup.com
Basic features• One-man operated• Direct mooring without the
use of stoppers• Optimal and safe control
during mooring• Controlled by foot pedal• Integrated emergency stop
and flexible cable connection• Failsafe brakes• Stepless speed control with
high light line speed• Automatic reduction of line
speed when load is increased• Low noise during operation• Self-lubricating bearings for
low maintenance• Compact, clean and water-
resistant design
Standard equipment• Complete winch bollard with
necessary equipment to ensure safe operation
• Frequency converter with control unit (electrical version)
• Prepared for connection to the vessel’s ring line system or HPU (hydraulic version)
• Foundation prepared for welding to the vessel’s main deck structure
• Entire steel structure made of certified steel and sandblasted to Sa 2.5 prior to painting
• Exterior paintwork: top quality, two-component epoxy/acrylic paint of highest marine standard. Colour according to owner’s choice
• Full set of operating manuals and spare parts list
• Optional pipe hatch; rope; storage drums; HPU; radio control etc, on request.
Technical specification for winch (based on ISO 3730)Size Units WB250 WB400 WB500
Rated pull kN 40 80 150Nominal speed, max m/min 12 12 6Light line speed, max m/min 45 45 30Design rope diameter mm 40 52 64Holding load, max kN 104 247 366Stalling load, max kN 40 80 150
Technical specification for bollard (based on ISO 3913)Size Units WB250 WB400 WB500
Mooring, single rope kN 104 247 366figure-of-eight belayed*Towing, rope attached kN 240 640 920with eye at one post**
*Same as for holding load **Safety factor minimum 2.36 on yield
TTS Marine reserves the right to change the specifications and measurements without notice.
TTS MARINE ASContact us today on:Switchboard: +47 38 04 95 00Fax: +47 38 04 93 [email protected] 24/7: +47 38 04 93 02