TTS has developed and patented a revolutionary mooring system which replaces

mooring winches, capstans and wrapping drums as well as the standard bollards

conventionally used for mooring. The system makes a saving on deck space but,

more significantly, mooring operations are made easier and safer than with the

standard methods currently available. The system is available in both hydraulic

and electric versions.

Winch bollards

MARINE

SHIPBOARDHANDLINGEXCELLENCE

www.ttsgroup.com

WINCH BOLLARDS

www.ttsgroup.com

Basic features• One-man operated• Direct mooring without the

use of stoppers• Optimal and safe control

during mooring• Controlled by foot pedal• Integrated emergency stop

and flexible cable connection• Failsafe brakes• Stepless speed control with

high light line speed• Automatic reduction of line

speed when load is increased• Low noise during operation• Self-lubricating bearings for

low maintenance• Compact, clean and water-

resistant design

Standard equipment• Complete winch bollard with

necessary equipment to ensure safe operation

• Frequency converter with control unit (electrical version)

• Prepared for connection to the vessel’s ring line system or HPU (hydraulic version)

• Foundation prepared for welding to the vessel’s main deck structure

• Entire steel structure made of certified steel and sandblasted to Sa 2.5 prior to painting

• Exterior paintwork: top quality, two-component epoxy/acrylic paint of highest marine standard. Colour according to owner’s choice

• Full set of operating manuals and spare parts list

• Optional pipe hatch; rope; storage drums; HPU; radio control etc, on request.

Technical specification for winch (based on ISO 3730)Size Units WB250 WB400 WB500

Rated pull kN 40 80 150Nominal speed, max m/min 12 12 6Light line speed, max m/min 45 45 30Design rope diameter mm 40 52 64Holding load, max kN 104 247 366Stalling load, max kN 40 80 150

Technical specification for bollard (based on ISO 3913)Size Units WB250 WB400 WB500

Mooring, single rope kN 104 247 366figure-of-eight belayed*Towing, rope attached kN 240 640 920with eye at one post**

*Same as for holding load **Safety factor minimum 2.36 on yield

TTS Marine reserves the right to change the specifications and measurements without notice.

TTS MARINE ASContact us today on:Switchboard: +47 38 04 95 00Fax: +47 38 04 93 41service.krs@tts-marine.noEmergency 24/7: +47 38 04 93 02