La Technologie Rust-Anode®
L'alternative à la galvanisation à chaud
Même performances que la galvanisation à chaudPerform as well as hot dip galvanizing
Tours/ Towers
Ponts/ Bridges
Structures/ Stuctures
Maritime / Maritime
Transport/ Transport
La Technologie Rust-Anode®
L’alternative à la Galvanisation à chaud!
Technologie RUST-ANODE® / StatistiquesRust-Anode®Technology / Statistics
La Technologie de la GALVANISATION À FROIDQu’est-ce exactement qu’une galvanisation à froid authentique?La galvanisation à froid est un enduit organique de zinc,mono composant, qui contient du zinc pur à 99.995%, formant un lien électro chimique.
TECHNOLOGIE RUST-ANODE® La galvanisation à froid avec la TECHNOLOGIE RUST-ANODE®: Cette technologie offre un lien électro chimique sur les surfaces traitées en formant un couple actif avec le métal de base en créant un lien électrolytique, résultant en un potentiel de 1060 mV.
À épaisseur égale, cette technologie offre la même protection cathodique que la galvanisation à chaud, la métallisation ou le zingage électrolytique. (Ce type de protection est de loin supérieur à celles de tous les produits antirouille traditionnels)
Appliqué sur de la rouille brune exempte de friable, cette technologie la transformera en hydroxyde de fer et formera la connexion électrique à travers la couche, provocant ainsi la protection cathodique requise. Peut être appliquée en atelier ou directement sur les chantiers.
La technologie Rust-Anode® suit les dilatations thermiques et les déformations du métal, sans fissuration, et peut être recouvert de peinture au choix.
Sur un vieux zinc ou métallisation, dont l’ancienne couche de zinc est épuisée et non active, la Technologie Rust-Anode® EST LA SEULE TECHNOLOGIE capable de se lier (fondre) parfaitement avec l’ancienne galvanisation à chaud et/ou la métallisation puis recharger le potentiel de protection cathodique.
Il devient donc possible, avec la Technologie Rust-Anode® de donner une nouvelle vie à votre galvanisation à chaud et ceci sans démanteler vos structures existantes. Aucun autre produit ne peut vous offrir cet avantage unique.
La Technologie Rust-Anode® est utilisée dans des domaines où se rencontrent des facteurs corrosifs et agressifs. Approuvé alimentaire selon l’Agence Canadienne d’inspection des aliments. Cette technologie a été utilisée exclusivement par les Forces militaires de l’Otan depuis les années 1954 jusqu’à 2003.
Pour les techniques de préparation de surface et d’application, consulter nos fiches techniques sur notre site internet www.galvatech2000.com
Cyclic Corrosion
Corrosion by immersion
Coating rich in organic zinc
Abrasion
Perpendicular pullingAdhesionHardnessImpactFlexibility-Folding-PlasticityUVSalt spray
Chemical Resistance
ASTM D5894-10 with cold period, 10,000 hours
ASTM G44-99 (2013), 3.5% Sodium Chloride, 90 day resultsONGC -1,181/CAN/CGSB-1.181-92ASTM D4060-14 1000 cycles CS10,charge 1000gASTM D4541, 27 mm, 1mm/mn, 343 psiASTM D3359ASTM D3363ASTM D2794, 100 pounds, impactor 0,625 inchesASTM D522, tapered mandrel, 180° ASTM G154-12aASTM GB117/ISO 12944-6/7253
Diesel
Gaz
Hydraulic Fluid (Skydrol)
Urea
Acetone
Brake fluid
Blister: none Corrosion: noneBlister: None Corrosion: less than 3%OK
116 mg
No detachment100%ExcellentNo cracksElongation: 15%,Resistance: 1/4 inchesLittle effectExcellent
Blister: none Corrosion: noneAdhesion: 100% Hardness: Low HBlister: none Corrosion: noneAdhesion: 100% Hardness: Low 2HBlister: very little Corrosion: noneAdhesion: 100% Hardness: FailureBlister: none Corrosion: noneAdhesion: 100% Hardness: Low HBlister: none Corrosion: noneAdhesion: 100% Hardness: Low HBlister: none Corrosion: noneAdhesion: 100% Hardness: Failure
Blister: none Corrosion: noneBlister: none Corrosion: 33%N/A
N/A
N/AN/AN/AN/AN/AN/AExcellent
N/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/A
APPLICATION
Pinceau Rouleau Pistolet Air less
Rust-Anode®TechnologyThe alternative to hot dip galvanizing
StandardTest name Cold galvanized Rust-Anode® Primer
Hot-dip galvanized
30 days complete immersion
CARACTÉRISTIQUES DE PERFORMANCES
Échantillons d'acier Préparation de surface: SSPC-SP10/NACE 2 / SA 2.5 Produits testé: Rust-Anode® Primer versus Galvanisation à Chaud Application d'une seule couche de Rust-Anode® Primer sans aucun autre revêtement de peinture
PERFORMANCE CHARACTERISTICS
Steel samples Surface preparation: SSPC-SP10 / NACE 2 / SA 2.5 Products tested: Rust-Anode® Primer versus Hot Dip Galvanization Application of a single coat of Rust-Anode® Primer without any paint coating
Corrosion Cyclique
Corrosion par immersion
Enduit riche en zinc organique
Abrasion
Arrachement perpendiculaireAdhésionDuretéImpactFlexibilité-Pliage-PlasticitéUVBrouillard salin
Résistance Chimique
ASTM D5894-10 avec période de froid, 10,000 heuresASTM G44-99 (2013), Chlorure Sodium à 3,5%(Résultats à 90 jours)ONGC -1,181/CAN/CGSB-1.181-92ASTM D4060-14 1000 cycles CS10, charge 1000gASTM D4541, 27 mm, 1mm/mn, 343 psiASTM D3359ASTM D3363ASTM D2794, 100 lbs, impacteur 0,625 poASTM D522, mandrin conique, 180°ASTM G154-12aASTM GB117/ISO 12944-6/7253
Diésel
Gasoline
Fluide hydraulique (Skydrol)
Urée
Acetone
Liquide de frein
Cloque: aucune Corrosion: aucuneCloque: Aucune Corrosion: moins de 3%OK
116 mg
aucun décollement100%ExcellentAucune craqueRésistance: 1/4 pc, Allongement: 15%Peu d'effetExcellent
Cloque: Aucune Corrosion: Aucune Adhésion: 100% Dureté: Faible HCloque: Aucune Corrosion: Aucune Adhésion: 100% Dureté: Faible 2HCloque: très peu Corrosion: Aucune Adhésion: 100% Dureté: ÉchecCloque: Aucune Corrosion: Aucune Adhésion: 100% Dureté: Faible HCloque: Aucune Corrosion: Aucune Adhésion: 100% Dureté: Faible HCloque: Aucune Corrosion: Aucune Adhésion: 100% Dureté: Échec
Cloque: aucune Corrosion: aucuneCloque: Aucune Corrosion: 33%N/A
N/A
N/AN/AN/AN/AN/AN/AExcellent
N/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/A
NormeNom du test Galvanisé à froid Rust-Anode® Primer
Galvanisé à chaud
Immersion complète 30 jours
297, rue Gendron, C.P. 123St-Léon le Grand (Québec)
Canada G0J 2W0
Phone : 418 743-2046Toll free : 1 888 743-2046
www.galvatech2000.com [email protected]
The Cold galvanizing technologyWhat is an authentic cold galvanization?
A cold galvanizing product is zinc (99.995% pure) coating with at least 90% of zinc in the dry film, creating an electrochemical bond with the substrate.
RUST-ANODE® TECHNOLOGYCold galvanizing using RUST-ANODE® TECHNOLOGY : This technology uses what is called a cathodic protection that is created by the electrolytic bondof the product with the substrate, resulting with a potential of 1060 mV.
Compared with a hot dip galvanization, metallization and electrolytically applied at equal thickness, offers the same cathodic galvanizing performances.
This technology can be applied over rust without compromising performances. It turns the rust into ferric hydroxide, thus making the electrochemical connection possible by penetrating this layer. The cathodic protection remains.
The Rust-Anode® technology follows thermal expansions and deformations of the substrate without cracking. Additionally it may be top-coated with any paint.
On older galvanized structures with a worn out cathodic protection, the Rust-Anode® technology IS THE SOLE TECHNOLOGY able to perfectly merge with the existing zinc in order to recharge the cathodic protection.
It is thus possible, with the Rust-Anode® technology, to give a second life to existing galvanized structures without dismantling them. No other product can offer this unique advantage.
The Rust-Anode® technology is used in corrosive and aggressive sectors. It is food approved by the Canadian Food Inspection Agency. This technology was also used by the NATO military forces since 1954 up to 2003.
Please refer to our technical data sheets on our website www.galvatech2000.com for additional surface preparation and application techniques.
Claude DupontDirecteur TechniqueTechnical Director
Recherche et développementResearch and development
Cell. [email protected]
APPLICATION
Brush Roller Paint Gun Air less
Contacts
Technologie RUST-ANODE® / AvantagesRust-Anode®Technology / Advantages
Rust-Anode® TechnologyThe Alternative to hot dip galvanizing process
AVANTAGES / Advantages
✓ ✓
✓
✓ ✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓✓
✓
✓ ✓
✓
✓ ✓
✓
✓
Galvanisation à chaudHot dip galvanization
Technologie Rust-Anode®
Rust-Anode® Technology
Simon DubéConseiller TechniqueTechnical Advisor
Cell: [email protected]
Technologie RUST-ANODE® / Photographies Rust-Anode®Technology / Pictures
Protection cathodique Cathodic protection
Contrôle de l’épaisseur en zinc Zinc thickness control
Longévité de la protection Longevity of the protection
Uniformité de la surface Surface uniformity
Temps minimal, de mise en service Minimal lead time
Soudabilité Weldability
Retouches possibles en tout temps Touch-ups at any time
Facile d’application en tout temps Easy to apply
Procédé non énergivore Non-energivore process
Recharge de zinc âgé existant Can recharge worn out existing zinc
Préparations minimales du substrat Minimal substrate preparation
Application avec équipement standard Applied with standard equipment
Aucune distorsion des pièces galvanisées Will not deform galvanized parts
Résistance en milieu salin High resistance in saline mediums
Applicable sur différents métaux Can be applied to various metals
Approbation Santé Canada Approved by Health Canada
Flexible au pliage des pièces galvanisées Flexible when bent
Équivalence de performance de protection Equivalent protection to hot dip galvanized
Applicable selon vos échéanciers de production Easily integrable to your production time frame
Procédé non polluant pour l’environnement Non-polluting process for the environment