M320 Mobile Receipt and Label Printer QUICK START GUIDE
Printer Overview
LED Indication and Keys
Note: Wireless devices are optional.
LED Status Indication
Printer status LED indicator
Off Pinter is ready Green (blinking) Printer is paused Red (solid) Media cover is open Red (blinking) Printer error
Battery status LED indicator Green (blinking) Recharge the battery Amber (solid) Battery is charging
Battery charge level LED indicator Green (solid)
Full charged 2/3 charged level 1/3 charged level
Wireless status LED indicator Blue (solid) Wireless device is ready
Blue (blinking) Wireless device is communicating
Keys Function 1. Press and hold for 2-3 seconds to turn on the printer.
2. Press and hold for 2-3 seconds to turn off the printer.
1. Feed one label when printer is ready. 2. Pause the print job while printing.
Media cover
Print head Wireless status LED indicator
Feed button Power on/off button
Printer status LED indicator
Battery status LED indicator
Battery charge level LED indicator
Power jack
Media holder
Media holder
Media cover release button
Platen
Tear edge
Media holder adjustment knob
Media holder position for 2” label or paper roll
Media holder position for 3” label or paper roll
Li-ion battery Battery open clasp
USB interface
Media holder alignment indicator
1
Loading the Media
Note: Please see User Guide if you need to adjust the width of the media guide. * For more information and features
about this printer, please refer to the user’s manual on the CD disk.
Install the Battery CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS. Charge the Battery Install the Belt Clip
2
Changing the Default Emulation All printers come standard with CPCL / Line Mode enabled.
To change the emulation, open the diagnostics tool, connect to the printer, and
press the “Active Emulation” button.
Select whichever emulation you want and click “Set.”
Copyright 2016 CognitiveTPG. M320-SUG0001 Rev B 3