M320 Mobile Receipt and Label Printer QUICK START GUIDE

Printer Overview

LED Indication and Keys

Note: Wireless devices are optional.

LED Status Indication

Printer status LED indicator

Off Pinter is ready Green (blinking) Printer is paused Red (solid) Media cover is open Red (blinking) Printer error

Battery status LED indicator Green (blinking) Recharge the battery Amber (solid) Battery is charging

Battery charge level LED indicator Green (solid)

Full charged 2/3 charged level 1/3 charged level

Wireless status LED indicator Blue (solid) Wireless device is ready

Blue (blinking) Wireless device is communicating

Keys Function 1. Press and hold for 2-3 seconds to turn on the printer.

2. Press and hold for 2-3 seconds to turn off the printer.

1. Feed one label when printer is ready. 2. Pause the print job while printing.

Media cover

Print head Wireless status LED indicator

Feed button Power on/off button

Printer status LED indicator

Battery status LED indicator

Battery charge level LED indicator

Power jack

Media holder

Media holder

Media cover release button

Platen

Tear edge

Media holder adjustment knob

Media holder position for 2” label or paper roll

Media holder position for 3” label or paper roll

Li-ion battery Battery open clasp

USB interface

Media holder alignment indicator

1

Loading the Media

Note: Please see User Guide if you need to adjust the width of the media guide. * For more information and features

about this printer, please refer to the user’s manual on the CD disk.

Install the Battery CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS. Charge the Battery Install the Belt Clip

2

Changing the Default Emulation All printers come standard with CPCL / Line Mode enabled.

To change the emulation, open the diagnostics tool, connect to the printer, and

press the “Active Emulation” button.

Select whichever emulation you want and click “Set.”

Copyright 2016 CognitiveTPG. M320-SUG0001 Rev B 3