©2019 by System Plus Consulting | Murata Incredible High Performance (IHP) SAW Filter | Sample 1
22 bd Benoni Goullin44200 NANTES - FRANCE +33 2 40 18 09 16 [email protected] www.systemplus.fr
Murata Incredible High Performance (IHP) SAW FilterThe first thin-film SAW filter for 2.4 GHz Wi-Fi smartphonefront-endsSP19454 - RF report by Stéphane ELISABETH
Laboratory Analysis by Youssef EL GMILIOctober 2019 – SAMPLE
REVERSE COSTING® – STRUCTURAL, PROCESS & COST REPORT
©2019 by System Plus Consulting | Murata Incredible High Performance (IHP) SAW Filter | Sample 2
Table of Contents
Overview / Introduction 4
o Executive Summary
o Reverse Costing Methodology
Company Profile 8
o Murata
o SAW Filter technologies
o Sony Xperia XA2 Ultra
Market Analysis 16
o RFFE Market Forecast
o RFFE Supply Chain
Physical Analysis 21
o Summary of the Physical Analysis 22
o Package Assembly 25
Package Views & Dimensions
Package Opening & Cross-Section
o Filter Die 33
Die View & Dimensions
Die Overview: IDT, Reflector, Polyimide
Die Cross-Section
Die Process Characteristic
Manufacturing Process 56
o Die Front-End Process & Fabrication Unit
o Filter Die process Flow
o Final Test & Packaging Fabrication unit
Cost Analysis 67
o Summary of the cost analysis 68
o Yields Explanation & Hypotheses 70
o Filter die 72
Wafer Front-End Cost
Wafer Probe Test & Dicing
Wafer Cost
Die Cost
o Packaging & Component 80
Packaging Cost
Final test
Component Cost
Selling price 90
Physical & Cost Comparison 85
o I.H.P. SAW vs. SAW vs. TC-SAW
o I.H.P SAW vs. BAW (FBAR and SMR)
Feedbacks 94
SystemPlus Consulting services 96
©2019 by System Plus Consulting | Murata Incredible High Performance (IHP) SAW Filter | Sample 3
Overview / Introductiono Executive Summaryo Reverse Costing Methodologyo Glossary
Company Profile & Supply Chain
Market Analysis
Physical Analysis
Manufacturing Process Flow
Cost Analysis
Selling Price Analysis
Physical & Cost Comparison
Related Reports
About System Plus
Executive Summary
This full reverse costing study has been conducted to provide insight on technology data, manufacturing cost and selling price of theMurata SAFQA2G45MA0G0A.3
Found in a low-end smartphone, the Sony Xperia XA2 Ultra and the Asus ZenFone 4 Pro, the filter die is packaged using a standard 5-pinLGA manufactured by Murata. The component is located near the Wifi transceiver and is part of the 2.4GHz Wifi Front-End path. Untilnow, it was common to find a BAW filter at this place.
Indeed, due the new structure of the IHP SAW, BAW filter could be replaced by this component. The filter realizes mainly with surfacemicromachining take the SAW filter to a new area. With a thin film of lithium tantalate bonded on a silicon substrate, the structure is ableto provide similar performances of BAW filter at lower cost.
Moreover, compared to other SAW filter that provides Murata to the smartphone industry, the IHP SAW filter show high performances interm of attenuation, insertion losses and thermo compensation. Indeed, the Chip Scale Packaging (CSP) is done in order to provide an aircavity that protect the transducer and limit the temperature effect.
This complete analysis of the IHP SAW Component includes analyses of the filter die and the CSP packaging, along with a cost analysis andprice estimation for the component. It also includes a physical and cost comparison with the Murata’s SAW filters offer. Finally, atechnical and cost comparison is included with the BAW filter technologies.
©2019 by System Plus Consulting | Murata Incredible High Performance (IHP) SAW Filter | Sample 4
Overview / Introduction
Company Profile & Supply Chain o Muratao SAW Filters technologieso Sony Xperia XA2 Ultra
Market Analysis
Physical Analysis
Manufacturing Process Flow
Cost Analysis
Selling Price Analysis
Physical & Cost Comparison
Related Reports
About System Plus
Sony Xperia XA2 Ultra Schematic
• The I.H.P. SAW is used on the Wifi 2G path between the transceiver and the triplexer before the antenna.
Source: FCC
©2019 by System Plus Consulting | Murata Incredible High Performance (IHP) SAW Filter | Sample 5
Overview / Introduction
Company Profile & Supply Chain
Market Analysis
Physical Analysis o Summaryo Package Assembly
o Views & Dimensionso Openingo Cross-Sectiono Synthesis
o Filter Dieo Views & Dimensionso Die Overviewo Die Cross-sectiono Synthesis
Manufacturing Process Flow
Cost Analysis
Selling Price Analysis
Physical & Cost Comparison
Related Reports
About System Plus
Summary of the Physical Analysis
©2019 by System Plus Consulting | Murata Incredible High Performance (IHP) SAW Filter | Sample 6
Overview / Introduction
Company Profile & Supply Chain
Market Analysis
Physical Analysis o Summaryo Package Assembly
o Views & Dimensionso Openingo Cross-Sectiono Synthesis
o Filter Dieo Views & Dimensionso Die Overviewo Die Cross-sectiono Synthesis
Manufacturing Process Flow
Cost Analysis
Selling Price Analysis
Physical & Cost Comparison
Related Reports
About System Plus
Package Cross-Section
©2019 by System Plus Consulting | Murata Incredible High Performance (IHP) SAW Filter | Sample 7
Overview / Introduction
Company Profile & Supply Chain
Market Analysis
Physical Analysis o Summaryo Package Assembly
o Views & Dimensionso Openingo Cross-Sectiono Synthesis
o Filter Dieo Views & Dimensionso Die Overviewo Die Cross-sectiono Synthesis
Manufacturing Process Flow
Cost Analysis
Selling Price Analysis
Physical & Cost Comparison
Related Reports
About System Plus
Package Cross-Section
©2019 by System Plus Consulting | Murata Incredible High Performance (IHP) SAW Filter | Sample 8
Overview / Introduction
Company Profile & Supply Chain
Market Analysis
Physical Analysis o Summaryo Package Assembly
o Views & Dimensionso Openingo Cross-Sectiono Synthesis
o Filter Dieo Views & Dimensionso Die Overviewo Die Cross-sectiono Synthesis
Manufacturing Process Flow
Cost Analysis
Selling Price Analysis
Physical & Cost Comparison
Related Reports
About System Plus
Die overview
©2019 by System Plus Consulting | Murata Incredible High Performance (IHP) SAW Filter | Sample 9
Overview / Introduction
Company Profile & Supply Chain
Market Analysis
Physical Analysis o Summaryo Package Assembly
o Views & Dimensionso Openingo Cross-Sectiono Synthesis
o Filter Dieo Views & Dimensionso Die Overviewo Die Cross-sectiono Synthesis
Manufacturing Process Flow
Cost Analysis
Selling Price Analysis
Physical & Cost Comparison
Related Reports
About System Plus
Die overview
©2019 by System Plus Consulting | Murata Incredible High Performance (IHP) SAW Filter | Sample 10
Overview / Introduction
Company Profile & Supply Chain
Market Analysis
Physical Analysis o Summaryo Package Assembly
o Views & Dimensionso Openingo Cross-Sectiono Synthesis
o Filter Dieo Views & Dimensionso Die Overviewo Die Cross-sectiono Synthesis
Manufacturing Process Flow
Cost Analysis
Selling Price Analysis
Physical & Cost Comparison
Related Reports
About System Plus
Die Cross-Section
©2019 by System Plus Consulting | Murata Incredible High Performance (IHP) SAW Filter | Sample 11
Overview / Introduction
Company Profile & Supply Chain
Market Analysis
Physical Analysis
Manufacturing Process Flowo Summaryo Filter Front-End Processo Filter Die process Flowo Filter Fabrication Unito Final Test & Assembly Unit
Cost Analysis
Selling Price Analysis
Physical & Cost Comparison
Related Reports
About System Plus
Filter Die Process Flow (1/6)
©2019 by System Plus Consulting | Murata Incredible High Performance (IHP) SAW Filter | Sample 12
Overview / Introduction
Company Profile & Supply Chain
Market Analysis
Physical Analysis
Manufacturing Process Flow
Cost Analysiso Cost Analysis Summaryo Yields Explanation &
Hypotheseso Filter Die Costo Package Costo Component Cost
Selling Price Analysis
Physical & Cost Comparison
Related Reports
About System Plus
Wafer Front-End Cost
©2019 by System Plus Consulting | Murata Incredible High Performance (IHP) SAW Filter | Sample 13
Overview / Introduction
Company Profile & Supply Chain
Market Analysis
Physical Analysis
Manufacturing Process Flow
Cost Analysiso Cost Analysis Summaryo Yields Explanation &
Hypotheseso Filter Die Costo Package Costo Component Cost
Selling Price Analysis
Physical & Cost Comparison
Related Reports
About System Plus
Component Cost
©2019 by System Plus Consulting | Murata Incredible High Performance (IHP) SAW Filter | Sample 14
Overview / Introduction
Company Profile & Supply Chain
Market Analysis
Physical Analysis
Manufacturing Process Flow
Cost Analysis
Selling Price Analysiso Definition of Priceso Manufacturer Financialso Complete Module Price
Physical & Cost Comparison
Related Reports
About System Plus
Estimated Selling Price
©2019 by System Plus Consulting | Murata Incredible High Performance (IHP) SAW Filter | Sample 15
Overview / Introduction
Company Profile & Supply Chain
Market Analysis
Physical Analysis
Manufacturing Process Flow
Cost Analysis
Selling Price Analysis
Physical & Cost Comparisono I.H.P SAW vs. SAW vs. TC-SAWo I.H.P SAW vs. BAW (FBAR and
SMR)
Related Reports
About System Plus
Technical Comparison – I.H.P. SAW vs. SAW and TC-SAW
©2019 by System Plus Consulting | Murata Incredible High Performance (IHP) SAW Filter | Sample 16
Overview / Introduction
Company Profile & Supply Chain
Market Analysis
Physical Analysis
Manufacturing Process Flow
Cost Analysis
Selling Price Analysis
Physical & Cost Comparisono I.H.P SAW vs. SAW vs. TC-SAWo I.H.P SAW vs. BAW (FBAR and
SMR)
Related Reports
About System Plus
Cost Comparison – I.H.P. SAW vs. BAW (FBAR and SMR)
©2019 by System Plus Consulting | Murata Incredible High Performance (IHP) SAW Filter | Sample 17
Overview / Introduction
Company Profile & Supply Chain
Market Analysis
Physical Analysis
Manufacturing Process Flow
Cost Analysis
Selling Price Analysis
Physical & Cost Comparison
Related Reports
About System Plus
Related Reports
MARKET AND TECHNOLOGY REPORTS - YOLE DÉVELOPPEMENT
RF Devices• 5G’s Impact on RF Front-End Module and Connectivity for Cell
phones 2019• Advanced RF System-in-Package for Cellphones 2019
REVERSE COSTING ANALYSES - SYSTEM PLUS CONSULTING
RF• Qualcomm 5G mmWave Front-End Module• RF Front-End Module Techical Comparison 2019• Broadcom AFEM-8092 – High/Mid Band FEM
PATENT ANALYSIS - KNOWMADE
Rf Devices• RF Acoustic Wave Filters – Patent Landscape Analysis 2019
©2019 by System Plus Consulting | Murata Incredible High Performance (IHP) SAW Filter | Sample 18
SystemPlusConsultingSERVI CES
©2019 by System Plus Consulting | Murata Incredible High Performance (IHP) SAW Filter | Sample 19
Overview / Introduction
Company Profile & Supply Chain
Market Analysis
Physical Analysis
Manufacturing Process Flow
Cost Analysis
Selling Price Analysis
Physical & Cost Comparison
Related Reports
About System Pluso Company serviceso Contact
Business Models Fields of Expertise
Custom Analyses(>130 analyses per year)
Reports(>60 reports per year)
Costing Tools
Trainings
©2019 by System Plus Consulting | Murata Incredible High Performance (IHP) SAW Filter | Sample 20
Overview / Introduction
Company Profile & Supply Chain
Market Analysis
Physical Analysis
Manufacturing Process Flow
Cost Analysis
Selling Price Analysis
Physical & Cost Comparison
Related Reports
About System Pluso Company serviceso Contact
Contact
Headquarters22 bd Benoni Goullin44200 NantesFRANCE+33 2 40 18 09 [email protected]
Europe Sales OfficeLizzie LEVENEZFrankfurt am MainGERMANY+49 151 23 54 41 [email protected]
www.systemplus.fr
Asia Sales OfficeTakashi ONOZAWATokyoJAPANT : +81 804 371 [email protected]
Mavis WANGTAIWANT :+886 979 336 [email protected]
NANTESHeadquarter
FRANKFURT/MAINEurope Sales Office
LYONYOLE HQ
TOKYOYOLE KK
GREATER CHINAYOLE
PHOENIXYOLE Inc.
KOREAYOLE
America Sales OfficeSteve LAFERRIEREPhoenix, AZWESTERN UST : +1 310 600 [email protected]
Chris YOUMANEASTERN US & CANADAT : +1 919 607 9839 [email protected]
©2019 by System Plus Consulting | Murata Incredible High Performance (IHP) SAW Filter | Sample 2
Table of Contents
Overview / Introduction 4
o Executive Summary
o Reverse Costing Methodology
Company Profile 8
o Murata
o SAW Filter technologies
o Sony Xperia XA2 Ultra
Market Analysis 16
o RFFE Market Forecast
o RFFE Supply Chain
Physical Analysis 21
o Summary of the Physical Analysis 22
o Package Assembly 25
Package Views & Dimensions
Package Opening & Cross-Section
o Filter Die 33
Die View & Dimensions
Die Overview: IDT, Reflector, Polyimide
Die Cross-Section
Die Process Characteristic
Manufacturing Process 56
o Die Front-End Process & Fabrication Unit
o Filter Die process Flow
o Final Test & Packaging Fabrication unit
Cost Analysis 67
o Summary of the cost analysis 68
o Yields Explanation & Hypotheses 70
o Filter die 72
Wafer Front-End Cost
Wafer Probe Test & Dicing
Wafer Cost
Die Cost
o Packaging & Component 80
Packaging Cost
Final test
Component Cost
Selling price 90
Physical & Cost Comparison 85
o I.H.P. SAW vs. SAW vs. TC-SAW
o I.H.P SAW vs. BAW (FBAR and SMR)
Feedbacks 94
SystemPlus Consulting services 96
©2019 by System Plus Consulting | Murata Incredible High Performance (IHP) SAW Filter | Sample 3
Overview / Introductiono Executive Summaryo Reverse Costing Methodologyo Glossary
Company Profile & Supply Chain
Market Analysis
Physical Analysis
Manufacturing Process Flow
Cost Analysis
Selling Price Analysis
Physical & Cost Comparison
Related Reports
About System Plus
Executive Summary
This full reverse costing study has been conducted to provide insight on technology data, manufacturing cost and selling price of theMurata SAFQA2G45MA0G0A.3
Found in a low-end smartphone, the Sony Xperia XA2 Ultra and the Asus ZenFone 4 Pro, the filter die is packaged using a standard 5-pinLGA manufactured by Murata. The component is located near the Wifi transceiver and is part of the 2.4GHz Wifi Front-End path. Untilnow, it was common to find a BAW filter at this place.
Indeed, due the new structure of the IHP SAW, BAW filter could be replaced by this component. The filter realizes mainly with surfacemicromachining take the SAW filter to a new area. With a thin film of lithium tantalate bonded on a silicon substrate, the structure is ableto provide similar performances of BAW filter at lower cost.
Moreover, compared to other SAW filter that provides Murata to the smartphone industry, the IHP SAW filter show high performances interm of attenuation, insertion losses and thermo compensation. Indeed, the Chip Scale Packaging (CSP) is done in order to provide an aircavity that protect the transducer and limit the temperature effect.
This complete analysis of the IHP SAW Component includes analyses of the filter die and the CSP packaging, along with a cost analysis andprice estimation for the component. It also includes a physical and cost comparison with the Murata’s SAW filters offer. Finally, atechnical and cost comparison is included with the BAW filter technologies.
©2019 by System Plus Consulting | Murata Incredible High Performance (IHP) SAW Filter | Sample 4
Overview / Introduction
Company Profile & Supply Chain o Muratao SAW Filters technologieso Sony Xperia XA2 Ultra
Market Analysis
Physical Analysis
Manufacturing Process Flow
Cost Analysis
Selling Price Analysis
Physical & Cost Comparison
Related Reports
About System Plus
Sony Xperia XA2 Ultra Schematic
• The I.H.P. SAW is used on the Wifi 2G path between the transceiver and the triplexer before the antenna.
Source: FCC
©2019 by System Plus Consulting | Murata Incredible High Performance (IHP) SAW Filter | Sample 5
Overview / Introduction
Company Profile & Supply Chain
Market Analysis
Physical Analysis o Summaryo Package Assembly
o Views & Dimensionso Openingo Cross-Sectiono Synthesis
o Filter Dieo Views & Dimensionso Die Overviewo Die Cross-sectiono Synthesis
Manufacturing Process Flow
Cost Analysis
Selling Price Analysis
Physical & Cost Comparison
Related Reports
About System Plus
Summary of the Physical Analysis
©2019 by System Plus Consulting | Murata Incredible High Performance (IHP) SAW Filter | Sample 6
Overview / Introduction
Company Profile & Supply Chain
Market Analysis
Physical Analysis o Summaryo Package Assembly
o Views & Dimensionso Openingo Cross-Sectiono Synthesis
o Filter Dieo Views & Dimensionso Die Overviewo Die Cross-sectiono Synthesis
Manufacturing Process Flow
Cost Analysis
Selling Price Analysis
Physical & Cost Comparison
Related Reports
About System Plus
Package Cross-Section
©2019 by System Plus Consulting | Murata Incredible High Performance (IHP) SAW Filter | Sample 7
Overview / Introduction
Company Profile & Supply Chain
Market Analysis
Physical Analysis o Summaryo Package Assembly
o Views & Dimensionso Openingo Cross-Sectiono Synthesis
o Filter Dieo Views & Dimensionso Die Overviewo Die Cross-sectiono Synthesis
Manufacturing Process Flow
Cost Analysis
Selling Price Analysis
Physical & Cost Comparison
Related Reports
About System Plus
Package Cross-Section
©2019 by System Plus Consulting | Murata Incredible High Performance (IHP) SAW Filter | Sample 8
Overview / Introduction
Company Profile & Supply Chain
Market Analysis
Physical Analysis o Summaryo Package Assembly
o Views & Dimensionso Openingo Cross-Sectiono Synthesis
o Filter Dieo Views & Dimensionso Die Overviewo Die Cross-sectiono Synthesis
Manufacturing Process Flow
Cost Analysis
Selling Price Analysis
Physical & Cost Comparison
Related Reports
About System Plus
Die overview
©2019 by System Plus Consulting | Murata Incredible High Performance (IHP) SAW Filter | Sample 9
Overview / Introduction
Company Profile & Supply Chain
Market Analysis
Physical Analysis o Summaryo Package Assembly
o Views & Dimensionso Openingo Cross-Sectiono Synthesis
o Filter Dieo Views & Dimensionso Die Overviewo Die Cross-sectiono Synthesis
Manufacturing Process Flow
Cost Analysis
Selling Price Analysis
Physical & Cost Comparison
Related Reports
About System Plus
Die overview
©2019 by System Plus Consulting | Murata Incredible High Performance (IHP) SAW Filter | Sample 10
Overview / Introduction
Company Profile & Supply Chain
Market Analysis
Physical Analysis o Summaryo Package Assembly
o Views & Dimensionso Openingo Cross-Sectiono Synthesis
o Filter Dieo Views & Dimensionso Die Overviewo Die Cross-sectiono Synthesis
Manufacturing Process Flow
Cost Analysis
Selling Price Analysis
Physical & Cost Comparison
Related Reports
About System Plus
Die Cross-Section
©2019 by System Plus Consulting | Murata Incredible High Performance (IHP) SAW Filter | Sample 11
Overview / Introduction
Company Profile & Supply Chain
Market Analysis
Physical Analysis
Manufacturing Process Flowo Summaryo Filter Front-End Processo Filter Die process Flowo Filter Fabrication Unito Final Test & Assembly Unit
Cost Analysis
Selling Price Analysis
Physical & Cost Comparison
Related Reports
About System Plus
Filter Die Process Flow (1/6)
©2019 by System Plus Consulting | Murata Incredible High Performance (IHP) SAW Filter | Sample 12
Overview / Introduction
Company Profile & Supply Chain
Market Analysis
Physical Analysis
Manufacturing Process Flow
Cost Analysiso Cost Analysis Summaryo Yields Explanation &
Hypotheseso Filter Die Costo Package Costo Component Cost
Selling Price Analysis
Physical & Cost Comparison
Related Reports
About System Plus
Wafer Front-End Cost
©2019 by System Plus Consulting | Murata Incredible High Performance (IHP) SAW Filter | Sample 13
Overview / Introduction
Company Profile & Supply Chain
Market Analysis
Physical Analysis
Manufacturing Process Flow
Cost Analysiso Cost Analysis Summaryo Yields Explanation &
Hypotheseso Filter Die Costo Package Costo Component Cost
Selling Price Analysis
Physical & Cost Comparison
Related Reports
About System Plus
Component Cost
©2019 by System Plus Consulting | Murata Incredible High Performance (IHP) SAW Filter | Sample 14
Overview / Introduction
Company Profile & Supply Chain
Market Analysis
Physical Analysis
Manufacturing Process Flow
Cost Analysis
Selling Price Analysiso Definition of Priceso Manufacturer Financialso Complete Module Price
Physical & Cost Comparison
Related Reports
About System Plus
Estimated Selling Price
©2019 by System Plus Consulting | Murata Incredible High Performance (IHP) SAW Filter | Sample 15
Overview / Introduction
Company Profile & Supply Chain
Market Analysis
Physical Analysis
Manufacturing Process Flow
Cost Analysis
Selling Price Analysis
Physical & Cost Comparisono I.H.P SAW vs. SAW vs. TC-SAWo I.H.P SAW vs. BAW (FBAR and
SMR)
Related Reports
About System Plus
Technical Comparison – I.H.P. SAW vs. SAW and TC-SAW
©2019 by System Plus Consulting | Murata Incredible High Performance (IHP) SAW Filter | Sample 16
Overview / Introduction
Company Profile & Supply Chain
Market Analysis
Physical Analysis
Manufacturing Process Flow
Cost Analysis
Selling Price Analysis
Physical & Cost Comparisono I.H.P SAW vs. SAW vs. TC-SAWo I.H.P SAW vs. BAW (FBAR and
SMR)
Related Reports
About System Plus
Cost Comparison – I.H.P. SAW vs. BAW (FBAR and SMR)
©2019 by System Plus Consulting | Murata Incredible High Performance (IHP) SAW Filter | Sample 17
Overview / Introduction
Company Profile & Supply Chain
Market Analysis
Physical Analysis
Manufacturing Process Flow
Cost Analysis
Selling Price Analysis
Physical & Cost Comparison
Related Reports
About System Plus
Related Reports
MARKET AND TECHNOLOGY REPORTS - YOLE DÉVELOPPEMENT
RF Devices• 5G’s Impact on RF Front-End Module and Connectivity for Cell
phones 2019• Advanced RF System-in-Package for Cellphones 2019
REVERSE COSTING ANALYSES - SYSTEM PLUS CONSULTING
RF• Qualcomm 5G mmWave Front-End Module• RF Front-End Module Techical Comparison 2019• Broadcom AFEM-8092 – High/Mid Band FEM
PATENT ANALYSIS - KNOWMADE
Rf Devices• RF Acoustic Wave Filters – Patent Landscape Analysis 2019
©2019 by System Plus Consulting | Murata Incredible High Performance (IHP) SAW Filter | Sample 18
SystemPlusConsultingSERVI CES
©2019 by System Plus Consulting | Murata Incredible High Performance (IHP) SAW Filter | Sample 19
Overview / Introduction
Company Profile & Supply Chain
Market Analysis
Physical Analysis
Manufacturing Process Flow
Cost Analysis
Selling Price Analysis
Physical & Cost Comparison
Related Reports
About System Pluso Company serviceso Contact
Business Models Fields of Expertise
Custom Analyses(>130 analyses per year)
Reports(>60 reports per year)
Costing Tools
Trainings
©2019 by System Plus Consulting | Murata Incredible High Performance (IHP) SAW Filter | Sample 20
Overview / Introduction
Company Profile & Supply Chain
Market Analysis
Physical Analysis
Manufacturing Process Flow
Cost Analysis
Selling Price Analysis
Physical & Cost Comparison
Related Reports
About System Pluso Company serviceso Contact
Contact
Headquarters22 bd Benoni Goullin44200 NantesFRANCE+33 2 40 18 09 [email protected]
Europe Sales OfficeLizzie LEVENEZFrankfurt am MainGERMANY+49 151 23 54 41 [email protected]
www.systemplus.fr
Asia Sales OfficeTakashi ONOZAWATokyoJAPANT : +81 804 371 [email protected]
Mavis WANGTAIWANT :+886 979 336 [email protected]
NANTESHeadquarter
FRANKFURT/MAINEurope Sales Office
LYONYOLE HQ
TOKYOYOLE KK
GREATER CHINAYOLE
PHOENIXYOLE Inc.
KOREAYOLE
America Sales OfficeSteve LAFERRIEREPhoenix, AZWESTERN UST : +1 310 600 [email protected]
Chris YOUMANEASTERN US & CANADAT : +1 919 607 9839 [email protected]
ORDER FORMPlease process my order for Murata Incredible High Performance (IHP) SAW Filter, Reverse Costing® – Structure, Process & Cost Report Ref: SP19454
Full Structure, Process & Cost Report : EUR 3,990* Annual Subscription offers possible from 3 reports, including this
report as the first of the year. Contact us for more information.
SHIP TO
Name (Mr/Ms/Dr/Pr): .............................................................
Job Title: …….............................................................................
Company: ….............................................................................
Address: …….............................................................................
City: ………………………………… State: ..........................................
Postcode/Zip: ..........................................................................
Country: ……............................................................................
VAT ID Number for EU members: ..........................................
Tel: ……………….........................................................................
Email: .....................................................................................
Date: ......................................................................................
Signature: ..............................................................................
BILLING CONTACT
First Name : ............................................................................
Last Name: …….......................................................................
Email: …..................................................................................
Phone: ……..............................................................................
PAYMENT
By credit card:
Number: |__|__|__|__| |__|__|__|__| |__|__|__|__|
|__|__|__|__|
Expiration date: |__|__|/|__|__|
Card Verification Value: |__|__|__|
By bank transfer:HSBC - CAE- Le Terminal -2 rue du Charron - 44800 St Herblain FranceBIC code: CCFRFRPP• In EUR
Bank code : 30056 - Branch code : 00955 - Account : 09550003234 IBAN: FR76 3005 6009 5509 5500 0323 439
• In USDBank code : 30056 - Branch code : 00955 - Account : 09550003247 IBAN: FR76 3005 6009 5509 5500 0324 797
REVERSE COSTING® – STRUCTURE, PROCESS & COST REPORTMURATA INCREDIBLE HIGH PERFORMANCE (IHP) SAW FILTER
Each year System Plus Consultingreleases a comprehensive collectionof new reverse engineering andcosting analyses in various domains.You can choose to buy over 12months a set of 3, 4, 5, 7, 10 or 15Reverse Costing® reports.
Up to 47% discount!
More than 60 reports released eachyear on the following topics(considered for 2018):• MEMS & Sensors: Accelerometer
– Environment - Fingerprint - Gas - Gyroscope - IMU/Combo -Microphone - Optics - Oscillator -Pressure
• Power: GaN - IGBT - MOSFET - Si Diode - SiC
• Imaging: Camera - Spectrometer• LED and Laser: UV LED – VCSEL -
White/blue LED• Packaging: 3D Packaging -
Embedded - SIP - WLP• Integrated Circuits: IPD –
Memories – PMIC - SoC• RF: FEM - Duplexer• Systems: Automotive - Consumer
- Energy - Telecom
ANNUAL SUBSCRIPTIONS
Return order by: FAX: +33 2 53 55 10 59MAIL: SYSTEM PLUS CONSULTING
22, bd Benoni GoullinNantes Biotech44200 Nantes – France
EMAIL: [email protected]
*For price in dollars please use the day’s exchange rate *All reports are delivered electronically in pdf format*For French customer, add 20 % for VAT*Our prices are subject to change. Please check our new releases and price changes on www.systemplus.fr. The present document is valid 6 months after its publishing date: October 2019
1.INTRODUCTIONThe present terms and conditions apply to the offers, sales and deliveries of services managed by System PlusConsulting except in the case of a particular written agreement.Buyer must note that placing an order means an agreement without any restriction with these terms and conditions.
2.PRICESPrices of the purchased services are those which are in force on the date the order is placed. Prices are in Euros andworked out without taxes. Consequently, the taxes and possible added costs agreed when the order is placed will becharged on these initial prices.System Plus Consulting may change its prices whenever the company thinks it necessary. However, the companycommits itself in invoicing at the prices in force on the date the order is placed.
3.REBATES and DISCOUNTSThe quoted prices already include the rebates and discounts that System Plus Consulting could have granted accordingto the number of orders placed by the Buyer, or other specific conditions. No discount is granted in case of earlypayment.
4.TERMS OF PAYMENTSystem Plus Consulting delivered services are to be paid within 30 days end of month by bank transfer except in thecase of a particular written agreement.If the payment does not reach System Plus Consulting on the deadline, the Buyer has to pay System Plus Consulting apenalty for late payment the amount of which is three times the legal interest rate. The legal interest rate is thecurrent one on the delivery date. This penalty is worked out on the unpaid invoice amount, starting from the invoicedeadline. This penalty is sent without previous notice.When payment terms are over 30 days end of month, the Buyer has to pay a deposit which amount is 10% of the
total invoice amount when placing his order.
5. OWNERSHIPSystem Plus Consulting remains sole owner of the delivered services until total payment of the invoice.
6.DELIVERIESThe delivery schedule on the purchase order is given for information only and cannot be strictly guaranteed.Consequently any reasonable delay in the delivery of services will not allow the buyer to claim for damages or tocancel the order.
7.ENTRUSTED GOODS SHIPMENTThe transport costs and risks are fully born by the Buyer. Should the customer wish to ensure the goods against lost ordamage on the base of their real value, he must imperatively point it out to System Plus Consulting when theshipment takes place. Without any specific requirement, insurance terms for the return of goods will be the carriercurrent ones (reimbursement based on good weight instead of the real value).
8.FORCE MAJEURESystem Plus Consulting responsibility will not be involved in non execution or late delivery of one of its dutiesdescribed in the current terms and conditions if these are the result of a force majeure case. Therefore, the forcemajeure includes all external event unpredictable and irresistible as defined by the article 1148 of the French CodeCivil?
9.CONFIDENTIALITYAs a rule, all information handed by customers to system Plus Consulting are considered as strictly confidential.A non-disclosure agreement can be signed on demand.
10.RESPONSABILITY LIMITATIONThe Buyer is responsible for the use and interpretations he makes of the reports delivered by System Plus Consulting.Consequently, System Plus Consulting responsibility can in no case be called into question for any direct or indirectdamage, financial or otherwise, that may result from the use of the results of our analysis or results obtained usingone of our costing tools.
11.APPLICABLE LAWAny dispute that may arise about the interpretation or execution of the current terms and conditions shall be resolvedapplying the French law.It the dispute cannot be settled out-of-court, the competent Court will be the Tribunal de Commerce de Nantes.
TERMS AND CONDITIONS OF SALES