8
EN
Impo
rtant
In
form
atio
nK
now
You
r Uni
tO
pera
ting
Inst
ruct
ions
Car
e an
d M
aint
enan
ceTe
chni
cal D
ata,
W
arra
nty,
etc
.
● Using an autoclaveRefer to the sterilizer’s instruction manual and precautionary information. Parts should be placed in the autoclave for 15 minutes at a temperature of 121 °C.Notes:•Whensterilizinginanautoclave,exercisecaresothatnopartscomeintocontactwithmetalpartsthatarein
contact with the sterilizer heater or heater. Because the heater becomes hot, any parts that come into contact with it may melt or become misshapen. •Somepartsmaybecomeslightlydiscolouredovertime,butthisdoesnotindicateaproblemwiththeirmaterial
properties.
● Disinfection chartParts can be disinfected using the methods listed in the chart below. For more information about disinfecting the main unit, see “Disinfecting the main unit”. ( Page 7) For more information about the disinfection process, see the disinfectant’s instructions and precautions. Note: Materials are indicated by the following abbreviations:
Acrylonitrile butadiene styrene resin: ABS, Poly phenylene sulfide resin: PPS, Polyethylene resin: PE, Polycarbonate resin: PC, Polymethylpentene: PMP, Polypropylene resin: PP, Polystyrene resin: PS, Polyvinyl chloride resin: PVC, Thermoplastic elastomer: TPE
Medication cup cover (with silicon packing (Washer))
Medication cup
Removable water tankNote: Disassemble the handle cover before disinfection.
Fan cover
Medication cup holder
PP
PP
ABS
Parts Materials Chemicaldisinfectant
Boilingwater Autoclave
Fan cover for bacterial filter
ABS
PP
Fan
Air filter case
Medication cup cover: PMPSilicon packing (Washer): Silicon rubber
Removable water tank: ABS/PPSHandle cover: ABS
PP
: applicable : not applicable
Before Inhalation
9
Inhalation hose MInhalation hose L
Hose: TPEHose ends: TPE
Inhalation mask (S) set Mask: TPEString: Rubber**
Inhalation mask (L) set Mask: TPEString: Rubber**
(Do not disinfect string.) (Do not disinfect string.) (Do not disinfect string)
(Do not disinfect string.)
*Heat-resistant polypropylene**The band is not made with natural rubber latex.
(Do not disinfect string.) (Do not disinfect string.)
Cover: PMPCap: Silicon rubberSilicon packing (Washer):
Silicon rubberBottle: PPSilicon packing (Washer):
Silicon rubberTube: Silicon rubberHanger: Stainless steel
Long time Nebulization set
Supply Medication set
(Do not disinfect hanger.)
Parts Materials Chemicaldisinfectant
Boilingwater Autoclave
PS
ABS
PS
Air filter
Protective Filter Case
Protective Filter
Mouthpiece PP*
Before Inhalation
IM-NE-U780-E-05-10/2018
