8

EN

Impo

rtant

In

form

atio

nK

now

You

r Uni

tO

pera

ting

Inst

ruct

ions

Car

e an

d M

aint

enan

ceTe

chni

cal D

ata,

W

arra

nty,

etc

.

● Using an autoclaveRefer to the sterilizer’s instruction manual and precautionary information. Parts should be placed in the autoclave for 15 minutes at a temperature of 121 °C.Notes:•Whensterilizinginanautoclave,exercisecaresothatnopartscomeintocontactwithmetalpartsthatarein

contact with the sterilizer heater or heater. Because the heater becomes hot, any parts that come into contact with it may melt or become misshapen. •Somepartsmaybecomeslightlydiscolouredovertime,butthisdoesnotindicateaproblemwiththeirmaterial

properties.

● Disinfection chartParts can be disinfected using the methods listed in the chart below. For more information about disinfecting the main unit, see “Disinfecting the main unit”. ( Page 7) For more information about the disinfection process, see the disinfectant’s instructions and precautions. Note: Materials are indicated by the following abbreviations:

Acrylonitrile butadiene styrene resin: ABS, Poly phenylene sulfide resin: PPS, Polyethylene resin: PE, Polycarbonate resin: PC, Polymethylpentene: PMP, Polypropylene resin: PP, Polystyrene resin: PS, Polyvinyl chloride resin: PVC, Thermoplastic elastomer: TPE

Medication cup cover (with silicon packing (Washer))

Medication cup

Removable water tankNote: Disassemble the handle cover before disinfection.

Fan cover

Medication cup holder

PP

PP

ABS

Parts Materials Chemicaldisinfectant

Boilingwater Autoclave

Fan cover for bacterial filter

ABS

PP

Fan

Air filter case

Medication cup cover: PMPSilicon packing (Washer): Silicon rubber

Removable water tank: ABS/PPSHandle cover: ABS

PP

: applicable : not applicable

Before Inhalation

9

Inhalation hose MInhalation hose L

Hose: TPEHose ends: TPE

Inhalation mask (S) set Mask: TPEString: Rubber**

Inhalation mask (L) set Mask: TPEString: Rubber**

(Do not disinfect string.) (Do not disinfect string.) (Do not disinfect string)

(Do not disinfect string.)

*Heat-resistant polypropylene**The band is not made with natural rubber latex.

(Do not disinfect string.) (Do not disinfect string.)

Cover: PMPCap: Silicon rubberSilicon packing (Washer):

Silicon rubberBottle: PPSilicon packing (Washer):

Silicon rubberTube: Silicon rubberHanger: Stainless steel

Long time Nebulization set

Supply Medication set

(Do not disinfect hanger.)

Parts Materials Chemicaldisinfectant

Boilingwater Autoclave

PS

ABS

PS

Air filter

Protective Filter Case

Protective Filter

Mouthpiece PP*

Before Inhalation

IM-NE-U780-E-05-10/2018