CARRIAGE BOLTS w/ square nut Finished points, rolled threads, square shoulders Hot Dip Galvanize Open-Hearth Steel 4,250 lb. Rated Tensile Strength
POLE LINE HARDWARE
POLE LINE HARDWAREPo
le L
ine
Har
dwar
e
Cat. No. Dia. O.A.
LengthThreadLength
StdPack
860412 3/8" 4.5" 3" 2508706
1/2"
6" 3" 1008707 7" 3" 1008708 8" 4" 1008710 10" 4" 508712 12" 6" 508808
5/8"
8" 4" 508810 10" 6" 508812 12" 6" 508814 14" 6" 508816 16" 6" 308818 18" 6" 308820 20" 6" 308822 22" 6" 258824 24" 6" 258910
3/4"
10" 6" 308912 12" 6" 258914 14" 6" 258916 16" 6" 258918 18" 6" 258920 20" 6" 258922 22" 6" 258924 24" 6" 158926 26" 6" 158928 28" 6" 15
MACHINE BOLTS w/ square nut Rolled threads; Bolts six inches or longer have con-type points. Hot dip galvanized.
Cat. No. Dia. O.A.
LengthThreadLength
StdPack
8634
3/8"
4" 1.75" 350863412 4.5" 1.75" 2508635 5" 1.75" 2508636 6" 1.75" 2508645
1/2"5" 3" 150
864512 5.5" 3" 1008646 6" 3" 100
Cat. No. Dia. O.A.
LengthThreadLength
StdPack
29959
5/8"
9" 4" 2529960 10" 6" 2529962 12" 6" 2529964 14" 6" 2529966 16" 6" 2529982
3/4"
12" 6" 2529984 14" 6" 2529986 16" 6" 2529988 18" 6" 15
OVAL EYE BOLTS w/ square nuts 9/16"x1-1/2"x2" Oval Eye 7,800 lb Rated Tensile Strength
DOUBLE ARMING, FULL THREAD BOLTS w/ 4 nutsCone type point. Hot dip galvanized steel. • 5/8" bolts: 12,400 lb Rated Tensile Strength • 3/4" bolts: 18,350 lb Rated Tensile Strength
Cat. No. Dia. O.A.
LengthThreadLength
StdPack
8862
5/8"
12" 12" 208864 14" 14" 208866 16" 16" 258868 18" 18" 208870 20" 20" 208872 22" 22" 208874 24" 24" 208876 26" 26" 208877 28" 28" 158878 30" 30" 158884
3/4"
14" 14" 208886 16" 16" 208892 22" 22" 158894 24" 24" 158896 26" 26" 158897 28" 28" 15
146HI-LINE UTILITY SUPPLY CO.Phone: 800-323-6606 Fax: 847-488-1285 www.hilineco.com
147HI-LINE UTILITY SUPPLY CO.Phone: 800-323-6606 Fax: 847-488-1285 www.hilineco.com
POLE LINE HARDWARE POLE LINE HARDWARE
POLE LINE HARDWAREDescription Cat.
No. Dia. O.A. Length
ThreadLength
StdPack
A) STRAIGHT THIMBLE EYE BOLTCone-Type Points; Drop-Forged Steel; Hot Dipped Galvanized; 12,400 Pound Rated Tensile Strength
5510
5/8"
10" 6" 255512 12" 6" 255514 14" 6" 255516 16" 6" 255614 3/4" 14" 6" 25
B) SINGLE UPSET BOLTSHot Dip Galvanized; 12,400 Pound Rated Tensile Strength
7741125/8"
13.75"/9" 4" 257742 14.75"/10" 4" 257743 16/75"/12" 6" 25
C) DOUBLE UPSET BOLTS w/ 2 Square Nuts, 1 Round Washer, 1 Cotter Key, 1 Lock Nut
78305/8"
15.75"/10" 6" 30
7832 17/75"/12" 6" 25
B C
Description Cat. No. Bolt Size Dimensions Std Pack
G) CURVED WASHERSGalvanized
680912 7/8" 4" x 4" x 1/4" 25
681012 5/8" 2.25" x 2.25" x 3/16" 250
682212 3/4" 3" x 3" x 1/4" 75
682312 5/8" 3" x 3" x 1/4" 75
H) SQUARE WASHERSGalvanized
6811 1/2" 2" x 2" x 1/8" 3006812 5/8" 2" x 2" x 1/8" 3006813 5/8" 2.25" x 2.25" x 3/16" 2006814 3/4" 2.25" x 2.25" x 3/16" 2006818 3/4" 4" x 4" x 3/16" 50
I) ROUND WASHERSGalvanized
PS6803 1/2" 1-3/8" OD x 12 GA 10006805 5/8" 1-3/4" OD x 10 GA 500
J) SPRING CLIP WASHERSGalvanized
3539 1/2" 5/32" x 1" 2003540 5/8" 1/4" x 1-3/4" 503541 3/4" 1/4" x 1-3/4" 50
K) DOUBLE COILSPRING LOCKWASHER
C205-0186 5/8" 3/16" x 1-3/16" 500
C205-0187 3/4" 7/32" x 1-3/8" 250
Description Cat. No. Size Dimensions Std Pack
L) STANDARD EYENUTSDrop-forged, hot dip galvanized steel
6502 5/8" 1-3/8" Shoulder - 3" High 75
6503 3/4" 1-3/8" Shoulder - 3" High 75
M) THIMBLEYE EYENUTSDrop-forged, hot dip galvanized steel
6510 5/8" 1-1/2" Shoulder - 3-1/4" High 50
6511 3/4" 1-1/2" Shoulder - 3-1/4" High 50
6512 1" 1-1/2" Shoulder - 3-1/4" High 25
N) ANGLE THIMBLEYEDrop-forged, hot dip galvanized steel
0100 5/8" 5" w/ 13/16" wire opening 500101 3/4" 5" w/ 13/16" wire opening 25
O) STRAIGHT THIMBLEYEDrop-forged, hot dip galvanized steel
6519 5/8" 4-5/16" x 11/16" x 1 hole 506520 3/4" 4-5/16" x 11/16" x 1 hole 50
A
D
Description Cat. No.
Bolt Size Std Pack
D) PALNUT HEX LOCK NUTSGalvanized
3530 3/8" 5,500
3531 1/2" 5,500
3532 5/8" 3,600
E) CURVED LOCK NUTSGalvanized
3510 3/8" 10003511 1/2" 20003512 5/8" 12503513 3/4" 10003514 7/8" 7503515 1" 400
F) REGULAR SQUARE NUTSGalvanized
55084P 5/8" 250
55085P 3/4" 250
E F G H I J K
M
L
N O
Pole Line Hardw
are
POLE LINE HARDWARE
POLE LINE HARDWARE
Description Cat. No. Dia. O.A. Length
ThreadLength
StdPack
A) LAG SCREW w/ Gimlet PointHot Dip Galvanized
8722GP 1/4" 2" 1-1/2" 2000
872212GP 1/4" 2.5" 1-3/4" 2000
B) LAG SCREW w/ Twist-Drive Pilot Point, Hot Dip Galvanized
508500 1/2" 4" 2-5/8" 250
C) LAG SCREW w/ Fetter-Drive Pilot Point Hot Dip Galvanized
508743 3/8" 3" 2" 500508754 1/2" 4" 2-5/8" 250
50875412 1/2" 4.5" 3" 150
D) DRIVE & HOOK SCREW w/Fetter-Drive Thread and Pilot Point
C205-0190 7/16" 4.75" 2.5" 200
E) POLE STEP- Hot Dip Galvanized w/Fetter-Drive Thread and Pilot Point
506125 5/8" 10" 50
Description Cat. No. Dia. O.A. Length StdPack
F) SERVING SLEEVE Hot Dip Galvanized w/Flared End
6454 3/8" 1-3/4" 5006455 7/16" 2" 1006456 1/2" 2-1/4" 100
G) BONDING CLAMPSFor Power Installed Screw Anchors
G5067 1/2" & 5/8" for Thimbleye Rods 100G5068 3/4", 1" for Thimbleye Rods 100G5069 5/8", 3/4", 1" for Twineye Rods 100
C203-0148 5/8", 3/4", 1" for Tripleye Rods 100
G) BONDING CLAMPSFor Expanding & Rock Anchors
G5060 1/2", 5/8" for Thimbleye Rods 250G5061 5/8", 3/4", 1" for Twineye Rods 250G5063 3/4", 1" for Tripleye Rods 250
H) STANDARD GROUND RODGalvanized w/48" Electro-brazed
pigtail8578 5/8" 8' 5
I) GROUND ROD CLAMPfor .128-.460 wire C203-0344 5/8" 50
B CA
D E
F
G
H
I
Description Cat. No. Dia. Length StdPack
J) ECONOMY GUY MARKERS Full round yellow markers, high densitiy polyethylene.
Easy installation.96FRPE 1-1/8" 8' 25
FLAME RETARDENT GUY MARKERS Full round yellow markers, high densitiy polyethylene.
Easy installation. Fits 3/16" - 1/2" strand.96FRPMYEL 1.5" 96" 20
Description Cat. No. Nom. Size H W T Length Std
PackStraps
Cat. No.
K) KOVER-GARD Plastic Molding
Flame retardent, easy to install
96KG12 1/2" 1/2" 1/2' 1/16" 96" 50 KS1296KG34 3/4" 3/4" 3/4" 1/16" 96" 50 KS3496KG1 1" 1" 1" 5/64" 96" 50 ---
96KG112 1-1/2" 1.5" 1.5" 5/64" 96" 25 ---
J
K
K-S Straps
Pole
Lin
e H
ardw
are
148HI-LINE UTILITY SUPPLY CO.Phone: 800-323-6606 Fax: 847-488-1285 www.hilineco.com
149HI-LINE UTILITY SUPPLY CO.Phone: 800-323-6606 Fax: 847-488-1285 www.hilineco.com
POLE LINE HARDWARE POLE LINE HARDWARE
POLE LINE HARDWARE
Description Cat. No. Dia. Shoulder Pin Length
O.A. Length
Std Pack
Pins for 1" InsulatorsFor Wood Crossarms
Long Shank w/nut, washer & lock nut
881 5/8" 2" 5" 10-3/4" 25881A 5/8" 2" 5" 11-1/2" 25883 5/8" 2" 6" 12-1/2" 25884 5/8" 2" 6" 11-3/4" 25
Pins for 1" InsulatorsFor Steel Crossarms
Short shank w/nut, washer & lock nut
886 5/8" 2" 5" 6-1/2"PS887 5/8" 2" 6" 7-1/2"PS893 3/4" 2-1/2" 6" 7-3/4"
Description Cat. No.
Pin Length
Bolt Length
Bolt Dia.
Thread Length Shoulder Pin
Dia.Std
PackHV Pins for 1-3/8" Insulators
for Wood CrossarmsLong Shank w/nut, washer, lock nut
4717 7" 7" 5/8" 2-1/2" 3" 1" 15
Description Cat. No. ThreadHeight Above
CrossarmCrossarm Size Std
Pack
Crossarm Type Pinswith 2 - 5/8" x 7" carriage bolts, 2 nuts, 2
lock nuts & washer plate
14322 1" 5-3/4" 3-3/4" x 4-3/4" 8
14322-1 1-3/8" 6-3/4" 3-3/4" x 4-3/4" 8
Description Cat. No. Thread O.A. Length Bolt Dia Stud
LengthStd
PackThimble Adapter Pins for 1" Insulatorswith 5/8" nut crimped to thimble bottom 4258 1" 5-1/4" 5/8" up to 3" 25
Description Cat. No.
O.A. Length "A" "B" Std
Pack
Pole Top Pins for 1" InsulatorsStraight base pins, 1" threads
2162 15" - 5" 152170 18" 3" 5" 152199 20" - 8" 102171 24" 2" 6" 10
2197-1 24" 3" 5" 10Same as above with 1-3/8" threads 2195 20" - 8" 10
Description Cat. No. Finish Length x Width x Dia
Std Pack Package Box
Qty
STAPLESRolled Diamond Point
C205-0225 Copper Coated 1-1/2" x 5/16" x .144" 25009153 Copper Coated 1-3/4" x 3/8" x .144" 25009154 Copper Coated 2" x 1/2" x .162" 1000
STAPLESCut Point (Sold by the pound)
9167 Copper Coated 1-1/2" x 3/8" x .162" 50 50 lb box 2900751134 Electro Zinc 1-1/2" x 1/4" x .148" 50 50 lb box 36007511 Electro Zinc 1" x 5/16" x .12" 1000
Pole Line Hardw
are
ALLEY ARM CROSSARM BRACECat. No. 6984
Used for side-arm construction. Furnished with lineman's step. Hot dip galvanized.
"V" CROSSARM BRACECat. No. 6942
Furnished with 9/16" crossarm mounting holes spread 60" apart and 11/16" pole mounting hole. 18" offset. 1-1/2" x 1-1/2" x 3/16" Hot dip galvanized.
POLE MOUNT CUTOUT AND ARRESTER BRACKETCat. No. C206-0299
Galvanized 3/8" x 2" steel with 12" pole clearance. A grounding lug connector is provided along with two 3/8" x 1-1/2" carriage bolts with nut, round washer and lock washer.
POLE TOP BRACKETCat. No. 2157
This bracket can be used with two pole-top pins to give additional clearance from the pole. It has an 11/16" hole at one end and an 11/16" x 1-1/4" slot at the other.
CURVED BASE POST INSULATOR BRACKETCat. No. C206-0010
This bracket can be used for mounting distribution post-type insulators from 15 kV to 34.5 kB on the side of the pole. The base has a pole-shaped back for convenient installation. Brackets can be placed in a phase-over-phase arrangement or can be mounted on opposite sides of the pole for "armless" construction. Includes a 13/16" stringing block hole.L-12" x D-13/16" x W-4"; A-15°
SIDE MOUNTED POST INSULATOR BRACKETCat. No. C206-0209
Formed of high-quality 3/8" x 2-1/2" bar steel and hot dip galvanized. Use to mount distribution post insulators from 15 kV to 34.5 kV. Includes stringing block holes.
Crossarm Cat. No. Description to Mtg. Bolt
C206-0127 NEMA Type A 2-9/16"
C206-0283 NEMA Type B 2-5/8"
C206-0280 Crossarm Mounting Bracket 5-1/4"
POLE LINE HARDWARE
CROSSARM MOUNT CUTOUT & ARRESTER BRACKETS
These mounting brackets adjust to fit arms from 3" x 4" to 4" x 5" crossarms and come complete with bolts, nuts and washers. Hot dip galvanized.
CUTOUT, ARRESTER & POTHEAD BRACKET Cat. No. C206-0189
Vertical member can be mounted with the vertical member running either up or down the pole. 12-1/8" x 8"
FLAT CROSSARM BRACE
Cat. No. 7128 - 28" longCat. No. 7132 - 32" long
Rounded ends are punched with a 9/16" hole on one end and a 7/16" hole on the other. Hot dip galvanized.
Pole
Lin
e H
ardw
are
150HI-LINE UTILITY SUPPLY CO.Phone: 800-323-6606 Fax: 847-488-1285 www.hilineco.com
