CARRIAGE BOLTS w/ square nut Finished points, rolled threads, square shoulders Hot Dip Galvanize Open-Hearth Steel 4,250 lb. Rated Tensile Strength

POLE LINE HARDWARE

POLE LINE HARDWAREPo

le L

ine

Har

dwar

e

Cat. No. Dia. O.A.

LengthThreadLength

StdPack

860412 3/8" 4.5" 3" 2508706

1/2"

6" 3" 1008707 7" 3" 1008708 8" 4" 1008710 10" 4" 508712 12" 6" 508808

5/8"

8" 4" 508810 10" 6" 508812 12" 6" 508814 14" 6" 508816 16" 6" 308818 18" 6" 308820 20" 6" 308822 22" 6" 258824 24" 6" 258910

3/4"

10" 6" 308912 12" 6" 258914 14" 6" 258916 16" 6" 258918 18" 6" 258920 20" 6" 258922 22" 6" 258924 24" 6" 158926 26" 6" 158928 28" 6" 15

MACHINE BOLTS w/ square nut Rolled threads; Bolts six inches or longer have con-type points. Hot dip galvanized.

Cat. No. Dia. O.A.

LengthThreadLength

StdPack

8634

3/8"

4" 1.75" 350863412 4.5" 1.75" 2508635 5" 1.75" 2508636 6" 1.75" 2508645

1/2"5" 3" 150

864512 5.5" 3" 1008646 6" 3" 100

Cat. No. Dia. O.A.

LengthThreadLength

StdPack

29959

5/8"

9" 4" 2529960 10" 6" 2529962 12" 6" 2529964 14" 6" 2529966 16" 6" 2529982

3/4"

12" 6" 2529984 14" 6" 2529986 16" 6" 2529988 18" 6" 15

OVAL EYE BOLTS w/ square nuts 9/16"x1-1/2"x2" Oval Eye 7,800 lb Rated Tensile Strength

DOUBLE ARMING, FULL THREAD BOLTS w/ 4 nutsCone type point. Hot dip galvanized steel. • 5/8" bolts: 12,400 lb Rated Tensile Strength • 3/4" bolts: 18,350 lb Rated Tensile Strength

Cat. No. Dia. O.A.

LengthThreadLength

StdPack

8862

5/8"

12" 12" 208864 14" 14" 208866 16" 16" 258868 18" 18" 208870 20" 20" 208872 22" 22" 208874 24" 24" 208876 26" 26" 208877 28" 28" 158878 30" 30" 158884

3/4"

14" 14" 208886 16" 16" 208892 22" 22" 158894 24" 24" 158896 26" 26" 158897 28" 28" 15

146HI-LINE UTILITY SUPPLY CO.Phone: 800-323-6606 Fax: 847-488-1285 www.hilineco.com

147HI-LINE UTILITY SUPPLY CO.Phone: 800-323-6606 Fax: 847-488-1285 www.hilineco.com

POLE LINE HARDWARE POLE LINE HARDWARE

POLE LINE HARDWAREDescription Cat.

No. Dia. O.A. Length

ThreadLength

StdPack

A) STRAIGHT THIMBLE EYE BOLTCone-Type Points; Drop-Forged Steel; Hot Dipped Galvanized; 12,400 Pound Rated Tensile Strength

5510

5/8"

10" 6" 255512 12" 6" 255514 14" 6" 255516 16" 6" 255614 3/4" 14" 6" 25

B) SINGLE UPSET BOLTSHot Dip Galvanized; 12,400 Pound Rated Tensile Strength

7741125/8"

13.75"/9" 4" 257742 14.75"/10" 4" 257743 16/75"/12" 6" 25

C) DOUBLE UPSET BOLTS w/ 2 Square Nuts, 1 Round Washer, 1 Cotter Key, 1 Lock Nut

78305/8"

15.75"/10" 6" 30

7832 17/75"/12" 6" 25

B C

Description Cat. No. Bolt Size Dimensions Std Pack

G) CURVED WASHERSGalvanized

680912 7/8" 4" x 4" x 1/4" 25

681012 5/8" 2.25" x 2.25" x 3/16" 250

682212 3/4" 3" x 3" x 1/4" 75

682312 5/8" 3" x 3" x 1/4" 75

H) SQUARE WASHERSGalvanized

6811 1/2" 2" x 2" x 1/8" 3006812 5/8" 2" x 2" x 1/8" 3006813 5/8" 2.25" x 2.25" x 3/16" 2006814 3/4" 2.25" x 2.25" x 3/16" 2006818 3/4" 4" x 4" x 3/16" 50

I) ROUND WASHERSGalvanized

PS6803 1/2" 1-3/8" OD x 12 GA 10006805 5/8" 1-3/4" OD x 10 GA 500

J) SPRING CLIP WASHERSGalvanized

3539 1/2" 5/32" x 1" 2003540 5/8" 1/4" x 1-3/4" 503541 3/4" 1/4" x 1-3/4" 50

K) DOUBLE COILSPRING LOCKWASHER

C205-0186 5/8" 3/16" x 1-3/16" 500

C205-0187 3/4" 7/32" x 1-3/8" 250

Description Cat. No. Size Dimensions Std Pack

L) STANDARD EYENUTSDrop-forged, hot dip galvanized steel

6502 5/8" 1-3/8" Shoulder - 3" High 75

6503 3/4" 1-3/8" Shoulder - 3" High 75

M) THIMBLEYE EYENUTSDrop-forged, hot dip galvanized steel

6510 5/8" 1-1/2" Shoulder - 3-1/4" High 50

6511 3/4" 1-1/2" Shoulder - 3-1/4" High 50

6512 1" 1-1/2" Shoulder - 3-1/4" High 25

N) ANGLE THIMBLEYEDrop-forged, hot dip galvanized steel

0100 5/8" 5" w/ 13/16" wire opening 500101 3/4" 5" w/ 13/16" wire opening 25

O) STRAIGHT THIMBLEYEDrop-forged, hot dip galvanized steel

6519 5/8" 4-5/16" x 11/16" x 1 hole 506520 3/4" 4-5/16" x 11/16" x 1 hole 50

A

D

Description Cat. No.

Bolt Size Std Pack

D) PALNUT HEX LOCK NUTSGalvanized

3530 3/8" 5,500

3531 1/2" 5,500

3532 5/8" 3,600

E) CURVED LOCK NUTSGalvanized

3510 3/8" 10003511 1/2" 20003512 5/8" 12503513 3/4" 10003514 7/8" 7503515 1" 400

F) REGULAR SQUARE NUTSGalvanized

55084P 5/8" 250

55085P 3/4" 250

E F G H I J K

M

L

N O

Pole Line Hardw

are

POLE LINE HARDWARE

POLE LINE HARDWARE

Description Cat. No. Dia. O.A. Length

ThreadLength

StdPack

A) LAG SCREW w/ Gimlet PointHot Dip Galvanized

8722GP 1/4" 2" 1-1/2" 2000

872212GP 1/4" 2.5" 1-3/4" 2000

B) LAG SCREW w/ Twist-Drive Pilot Point, Hot Dip Galvanized

508500 1/2" 4" 2-5/8" 250

C) LAG SCREW w/ Fetter-Drive Pilot Point Hot Dip Galvanized

508743 3/8" 3" 2" 500508754 1/2" 4" 2-5/8" 250

50875412 1/2" 4.5" 3" 150

D) DRIVE & HOOK SCREW w/Fetter-Drive Thread and Pilot Point

C205-0190 7/16" 4.75" 2.5" 200

E) POLE STEP- Hot Dip Galvanized w/Fetter-Drive Thread and Pilot Point

506125 5/8" 10" 50

Description Cat. No. Dia. O.A. Length StdPack

F) SERVING SLEEVE Hot Dip Galvanized w/Flared End

6454 3/8" 1-3/4" 5006455 7/16" 2" 1006456 1/2" 2-1/4" 100

G) BONDING CLAMPSFor Power Installed Screw Anchors

G5067 1/2" & 5/8" for Thimbleye Rods 100G5068 3/4", 1" for Thimbleye Rods 100G5069 5/8", 3/4", 1" for Twineye Rods 100

C203-0148 5/8", 3/4", 1" for Tripleye Rods 100

G) BONDING CLAMPSFor Expanding & Rock Anchors

G5060 1/2", 5/8" for Thimbleye Rods 250G5061 5/8", 3/4", 1" for Twineye Rods 250G5063 3/4", 1" for Tripleye Rods 250

H) STANDARD GROUND RODGalvanized w/48" Electro-brazed

pigtail8578 5/8" 8' 5

I) GROUND ROD CLAMPfor .128-.460 wire C203-0344 5/8" 50

B CA

D E

F

G

H

I

Description Cat. No. Dia. Length StdPack

J) ECONOMY GUY MARKERS Full round yellow markers, high densitiy polyethylene.

Easy installation.96FRPE 1-1/8" 8' 25

FLAME RETARDENT GUY MARKERS Full round yellow markers, high densitiy polyethylene.

Easy installation. Fits 3/16" - 1/2" strand.96FRPMYEL 1.5" 96" 20

Description Cat. No. Nom. Size H W T Length Std

PackStraps

Cat. No.

K) KOVER-GARD Plastic Molding

Flame retardent, easy to install

96KG12 1/2" 1/2" 1/2' 1/16" 96" 50 KS1296KG34 3/4" 3/4" 3/4" 1/16" 96" 50 KS3496KG1 1" 1" 1" 5/64" 96" 50 ---

96KG112 1-1/2" 1.5" 1.5" 5/64" 96" 25 ---

J

K

K-S Straps

Pole

Lin

e H

ardw

are

148HI-LINE UTILITY SUPPLY CO.Phone: 800-323-6606 Fax: 847-488-1285 www.hilineco.com

149HI-LINE UTILITY SUPPLY CO.Phone: 800-323-6606 Fax: 847-488-1285 www.hilineco.com

POLE LINE HARDWARE POLE LINE HARDWARE

POLE LINE HARDWARE

Description Cat. No. Dia. Shoulder Pin Length

O.A. Length

Std Pack

Pins for 1" InsulatorsFor Wood Crossarms

Long Shank w/nut, washer & lock nut

881 5/8" 2" 5" 10-3/4" 25881A 5/8" 2" 5" 11-1/2" 25883 5/8" 2" 6" 12-1/2" 25884 5/8" 2" 6" 11-3/4" 25

Pins for 1" InsulatorsFor Steel Crossarms

Short shank w/nut, washer & lock nut

886 5/8" 2" 5" 6-1/2"PS887 5/8" 2" 6" 7-1/2"PS893 3/4" 2-1/2" 6" 7-3/4"

Description Cat. No.

Pin Length

Bolt Length

Bolt Dia.

Thread Length Shoulder Pin

Dia.Std

PackHV Pins for 1-3/8" Insulators

for Wood CrossarmsLong Shank w/nut, washer, lock nut

4717 7" 7" 5/8" 2-1/2" 3" 1" 15

Description Cat. No. ThreadHeight Above

CrossarmCrossarm Size Std

Pack

Crossarm Type Pinswith 2 - 5/8" x 7" carriage bolts, 2 nuts, 2

lock nuts & washer plate

14322 1" 5-3/4" 3-3/4" x 4-3/4" 8

14322-1 1-3/8" 6-3/4" 3-3/4" x 4-3/4" 8

Description Cat. No. Thread O.A. Length Bolt Dia Stud

LengthStd

PackThimble Adapter Pins for 1" Insulatorswith 5/8" nut crimped to thimble bottom 4258 1" 5-1/4" 5/8" up to 3" 25

Description Cat. No.

O.A. Length "A" "B" Std

Pack

Pole Top Pins for 1" InsulatorsStraight base pins, 1" threads

2162 15" - 5" 152170 18" 3" 5" 152199 20" - 8" 102171 24" 2" 6" 10

2197-1 24" 3" 5" 10Same as above with 1-3/8" threads 2195 20" - 8" 10

Description Cat. No. Finish Length x Width x Dia

Std Pack Package Box

Qty

STAPLESRolled Diamond Point

C205-0225 Copper Coated 1-1/2" x 5/16" x .144" 25009153 Copper Coated 1-3/4" x 3/8" x .144" 25009154 Copper Coated 2" x 1/2" x .162" 1000

STAPLESCut Point (Sold by the pound)

9167 Copper Coated 1-1/2" x 3/8" x .162" 50 50 lb box 2900751134 Electro Zinc 1-1/2" x 1/4" x .148" 50 50 lb box 36007511 Electro Zinc 1" x 5/16" x .12" 1000

Pole Line Hardw

are

ALLEY ARM CROSSARM BRACECat. No. 6984

Used for side-arm construction. Furnished with lineman's step. Hot dip galvanized.

"V" CROSSARM BRACECat. No. 6942

Furnished with 9/16" crossarm mounting holes spread 60" apart and 11/16" pole mounting hole. 18" offset. 1-1/2" x 1-1/2" x 3/16" Hot dip galvanized.

POLE MOUNT CUTOUT AND ARRESTER BRACKETCat. No. C206-0299

Galvanized 3/8" x 2" steel with 12" pole clearance. A grounding lug connector is provided along with two 3/8" x 1-1/2" carriage bolts with nut, round washer and lock washer.

POLE TOP BRACKETCat. No. 2157

This bracket can be used with two pole-top pins to give additional clearance from the pole. It has an 11/16" hole at one end and an 11/16" x 1-1/4" slot at the other.

CURVED BASE POST INSULATOR BRACKETCat. No. C206-0010

This bracket can be used for mounting distribution post-type insulators from 15 kV to 34.5 kB on the side of the pole. The base has a pole-shaped back for convenient installation. Brackets can be placed in a phase-over-phase arrangement or can be mounted on opposite sides of the pole for "armless" construction. Includes a 13/16" stringing block hole.L-12" x D-13/16" x W-4"; A-15°

SIDE MOUNTED POST INSULATOR BRACKETCat. No. C206-0209

Formed of high-quality 3/8" x 2-1/2" bar steel and hot dip galvanized. Use to mount distribution post insulators from 15 kV to 34.5 kV. Includes stringing block holes.

Crossarm Cat. No. Description to Mtg. Bolt

C206-0127 NEMA Type A 2-9/16"

C206-0283 NEMA Type B 2-5/8"

C206-0280 Crossarm Mounting Bracket 5-1/4"

POLE LINE HARDWARE

CROSSARM MOUNT CUTOUT & ARRESTER BRACKETS

These mounting brackets adjust to fit arms from 3" x 4" to 4" x 5" crossarms and come complete with bolts, nuts and washers. Hot dip galvanized.

CUTOUT, ARRESTER & POTHEAD BRACKET Cat. No. C206-0189

Vertical member can be mounted with the vertical member running either up or down the pole. 12-1/8" x 8"

FLAT CROSSARM BRACE

Cat. No. 7128 - 28" longCat. No. 7132 - 32" long

Rounded ends are punched with a 9/16" hole on one end and a 7/16" hole on the other. Hot dip galvanized.

Pole

Lin

e H

ardw

are

150HI-LINE UTILITY SUPPLY CO.Phone: 800-323-6606 Fax: 847-488-1285 www.hilineco.com