Download - PolySprint_Trifold.pdf
1-800-221-3689 • Fax: 770-623-1398 • www.nitta.com
PolySprint TM
Belting Products for the
PrintingIndustry
7605 Nitta Drive • Suwanee, GA 300241-800-221-3689 • Fax: 770-623-1398
www.nitta.com
“The Advantage”Superior Product • Superior Quality • Superior Service
Nitta’s PolySprint range of finger-splicebelting is ideally suited for use in theprinting and bookbinding industries.
PolySprint outperforms all competitivefinger-spliceable products and is available
in a broad range of styles. PolySprintmachine tapes and belts are widely used
in gravure, web offset, sheetfed, andbindery operations. PolySprint products
greatly reduce costly downtime as a quickand easy alternative to time-consuming
skived machine tape installations.
Nitta PolySprint belting improves thebottom line for printers with higher running
speeds, less downtime, and extendedruntime, boosting production and
lowering the total cost of ownership.That’s “The Nitta Advantage.”
PolySprint TM Belting
NBP-0002-1008“The Advantage”
Features and Benefits
Nitta’s PolySprint finger-splice belting is made with a variety of covers and carcasses fora wide range of applications. Some belts are elastic with thermoplastic carcasses; somebelts are non-elastic with carcasses reinforced with polyamide or polyester fabrics.Nitta PolySprint outlasts and outmatches all similar competitive materials, with manyadvantages for end users:
• Greatly reduces costly downtime as a quick and easy-to-install alternative to skived products
• Simple and fast QuikFlex finger-splice system requires no adhesives and minimal training
• Long service life due to highly abrasion-resistantcovers – abrasion resistance proven best in industry
• Much lower permanent elongation than competitors
• Splice is much stronger than a butt splice
• Immune to moisture as humidity levels change
PolySprint TM – Reduce Downtime and Save Money with “The Advantage”
Belting for Printing Applications
Belt TypeThickness
(mm)Standard
Elongation e (%)Tension ate% (N/mm)
Min. PulleyDiameter (mm)
Top Cover Coeff. ofFriction (on paper)
Pulley Side Coeff. ofFriction (on steel)
Color (Top Cover /Pulley Side)
TA* 1.2 5 0.7 25 0.7 ~ 0.8 0.3 ~ 0.4 Blue / Black
TC* 1.4 5 0.8 40 0.6 ~ 0.7 0.3 ~ 0.4 Green / Black
DBTW-0514 1.4 5 0.5 25 0.7 ~ 0.8 0.2 ~ 0.3 Blue / Black
STC-10 1.35 5 0.5 25 0.2 ~ 0.3 0.3 ~ 0.4 Blue / Black
DB-4E14 1.4 1 4 25 0.7 ~ 0.8 0.3 ~ 0.4 Blue / Blue
FZ-5E12 1.25 1 5 35 0.6 ~ 0.7 0.5 ~ 0.6 Green / Green
GLTE-4E18 1.8 1 4 40 0.8 ~ 0.9 0.1 ~ 0.2 Blue / White
LA-4E14 1.4 1 4 25 0.8 ~ 0.9 0.5 ~ 0.6 Blue / Blue
LA-15E20 2.0 1 15 40 0.8 ~ 0.9 0.5 ~ 0.6 Blue / Blue
TTF-4E10 1.0 1 4 15 0.2 ~ 0.3 0.1 ~ 0.2 Gray / Gray
TTZ-4E10 1.0 1 4 30 0.6 ~ 0.7 0.6 ~ 0.7 (on paper) Green / Green
TTE-4E18 1.8 1 4 40 0.2 ~ 0.3 0.1 ~ 0.2 White / White
TTE-8E18 1.8 1 8 40 0.2 ~ 0.3 0.1 ~ 0.2 White / White
SLA-8E14 1.4 1 8 25 0.8 ~ 0.9 0.5 ~ 0.6 Blue / Blue
Joining Tools
Nitta offers a complete line of high-quality, durable toolsfor making endless PolySprint belts. We offer finger-cutters, digitally controlled heating presses, coolingpresses, and pre-setters for splice alignment.
Nitta’s PolySprint tools make it quick and easy to replacebroken belts with minimal downtime. Our presses aredesigned with small profiles to fit into tight spaces, sothere is no need to disassemble the machine. Both 50mmand 100mm maximum-width equipment lines are available,accommodating all common belting sizes for printing.
*Please note: recommended splice for this belt type is butt splice
rev. Apr. 20, 2011