Download - Power generation from speed breakers
![Page 1: Power generation from speed breakers](https://reader035.vdocument.in/reader035/viewer/2022070313/554a5963b4c90531228b5065/html5/thumbnails/1.jpg)
POWER GENERATION FROM SPEED BREAKERS
Submitted by:-Brati Sundar Nanda1011016238ECE-E
![Page 2: Power generation from speed breakers](https://reader035.vdocument.in/reader035/viewer/2022070313/554a5963b4c90531228b5065/html5/thumbnails/2.jpg)
CONTENTS
Introduction Different mechanisms Spring coil mechanism Roller mechanism Rack pinion mechanism Different Comparisons Merits and Demerit Scope and Uses Conclusion References
![Page 3: Power generation from speed breakers](https://reader035.vdocument.in/reader035/viewer/2022070313/554a5963b4c90531228b5065/html5/thumbnails/3.jpg)
INTRODUCTION A large amount of energy is wasted at the speed
breakers through friction , every time a vehicle passes over it.
So electricity can be generated using the vehicle weight and speed (kinetic energy) as input.
So, this is a small step to try to improve this situation.
![Page 4: Power generation from speed breakers](https://reader035.vdocument.in/reader035/viewer/2022070313/554a5963b4c90531228b5065/html5/thumbnails/4.jpg)
POSSIBLE USING DIFFERENT MECHANISMS
SPRING COIL MECHANISM
ROLLER MECHANISM
CRANK-SHAFT MECHANISM
RACK- PINION MECHANISM
![Page 5: Power generation from speed breakers](https://reader035.vdocument.in/reader035/viewer/2022070313/554a5963b4c90531228b5065/html5/thumbnails/5.jpg)
CONSTRUCTION OF THE SPEED BREAKER Here we are making the speed breaker of vibrating
type, when a vehicle crosses the speed breaker, it gets pressed and then it gets back to its original position.
Dimensions of speed breaker:-
Height : 0.2m
Width : 0.4m
Length : 4mo The material used in construction of speed breakers is
steel.
o The shape of speed breaker is
trapezoidal .
![Page 6: Power generation from speed breakers](https://reader035.vdocument.in/reader035/viewer/2022070313/554a5963b4c90531228b5065/html5/thumbnails/6.jpg)
CONSTRUCTION OF THE TRENCH
• Height: 0.35m• Length : 4m• Width :0.45m• The bottom layer of the trench is filled with concrete or with wooden plates of 0.5m. •This is for cushion effect.
![Page 7: Power generation from speed breakers](https://reader035.vdocument.in/reader035/viewer/2022070313/554a5963b4c90531228b5065/html5/thumbnails/7.jpg)
DESIGN OF THE SPRING The actual height of spring is 0.3m before loading. The deflection of the spring is given by δ = 64 w *n*N*R^3 /(G^4) where δ-deflection (in our case maximum δ =0.1m) w=designed load R= mean diameter of coil n=no of spring turns G= Modulus of rigidity = 8*10^4 N/m^2 N= No. of springs The no of turns in the spring to get the
deflection of 0.1m is given by n= (0.1)G^4/(64 w*N*R^3)
![Page 8: Power generation from speed breakers](https://reader035.vdocument.in/reader035/viewer/2022070313/554a5963b4c90531228b5065/html5/thumbnails/8.jpg)
WORKING PROCESS Maximum load on the speed
breaker is when the vehicle is on the middle of the speed breaker.
When the pressure in the FRL unit exceeds the defined level the valve opens and the pressurized air is given to the nozzle.
![Page 9: Power generation from speed breakers](https://reader035.vdocument.in/reader035/viewer/2022070313/554a5963b4c90531228b5065/html5/thumbnails/9.jpg)
NOZZLE The diameter of the inlet
of nozzle must be greater than outlet.
Here the pressure energy is converted to kinetic energy i.e pressure→high velocity.
This high velocity compressd air when hits the runner,makes it to rotate.
![Page 10: Power generation from speed breakers](https://reader035.vdocument.in/reader035/viewer/2022070313/554a5963b4c90531228b5065/html5/thumbnails/10.jpg)
RUNNER It consists of a circular
disc on the periphery of which have number of buckets evenly spaced are fixed. Each bucket is divided in to 2 symmetrical parts by a dividing wall is know as splitter.
When the air strikes the runner ,it rotates & continues rotation due to inertia.
![Page 11: Power generation from speed breakers](https://reader035.vdocument.in/reader035/viewer/2022070313/554a5963b4c90531228b5065/html5/thumbnails/11.jpg)
ROLLER MECHANISM Here roller ,sprocket-chain arrangement is used. Ratio of speed of roller to dynamo shaft is 1:4.
![Page 12: Power generation from speed breakers](https://reader035.vdocument.in/reader035/viewer/2022070313/554a5963b4c90531228b5065/html5/thumbnails/12.jpg)
MECHANISM OF DIFFERENT PARTS Sprocket mechanism Transfers rotary motion between two shafts
Dynamo It is the dc generator which is use to generate current Generates current as per the Faraday’s Law
![Page 13: Power generation from speed breakers](https://reader035.vdocument.in/reader035/viewer/2022070313/554a5963b4c90531228b5065/html5/thumbnails/13.jpg)
BLOCK DIAGRAM1 •Speed Breaker Arrangement
2 •Roller Arrangement
3 •Sprocket Drives4 •Chain Drive
5 •Dynamo shaft
6 •Battery
![Page 14: Power generation from speed breakers](https://reader035.vdocument.in/reader035/viewer/2022070313/554a5963b4c90531228b5065/html5/thumbnails/14.jpg)
RACK-PINION MECHANISM
The various machine elements used in the construction of power hump are
RACK-PINION
SPROCKETS
GEARS
FLY WHEEL
Dynamo
![Page 15: Power generation from speed breakers](https://reader035.vdocument.in/reader035/viewer/2022070313/554a5963b4c90531228b5065/html5/thumbnails/15.jpg)
MECHANISM OF DIFFERENT PARTS Gear mechanism The input gear transfers rotational motion to the output gear.
RACK-PINION It coverts linear motion to rotational and vice versa.
![Page 16: Power generation from speed breakers](https://reader035.vdocument.in/reader035/viewer/2022070313/554a5963b4c90531228b5065/html5/thumbnails/16.jpg)
CONTINUED…Fly wheel This is used to regulate the energy and maintain the energy at an
uniform level so that the shaft rotate at an uniform r.p.m
Constructional details
![Page 17: Power generation from speed breakers](https://reader035.vdocument.in/reader035/viewer/2022070313/554a5963b4c90531228b5065/html5/thumbnails/17.jpg)
WORKING PROCEDURE Here the reciprocating motion of the speed-breaker is converted
into rotary motion using the rack and pinion arrangement.
Rack and pinion gears normally change rotary motion into linear motion, but sometimes we use them to change linear motion into rotary motion.
The axis of the pinion is coupled with the sprocket arrangement.
The axis of the smaller sprocket is coupled to a gear arrangement.
Finally the gear arrangement is coupled with the generator
![Page 18: Power generation from speed breakers](https://reader035.vdocument.in/reader035/viewer/2022070313/554a5963b4c90531228b5065/html5/thumbnails/18.jpg)
VOLTAGE GENERATED (VS) SPEED OF VEHICLE
Speed of vehicle (km\hr)
Voltage generated (volts)
10 7.93
20 6.28
30 5.03
40 4.66
50 3.03
![Page 19: Power generation from speed breakers](https://reader035.vdocument.in/reader035/viewer/2022070313/554a5963b4c90531228b5065/html5/thumbnails/19.jpg)
VOLTAGE GENERATED (VS) LOADVehicle load
(Kg)Max. Vol. generated
(volts)
Mean Power(Watt)
Charging Time
(sec)
205 10.73 7.99 3.9
250 12.83 9.47 4
320 13.05 10.5 4.1
400 14.91 11.21 4.2
![Page 20: Power generation from speed breakers](https://reader035.vdocument.in/reader035/viewer/2022070313/554a5963b4c90531228b5065/html5/thumbnails/20.jpg)
MERITS AND DEMERITSMerits Demerits
Pollution free power generation.
Selecting suitable generator.
No obstruction to traffic. Selection of springs.
Low Budget electricity production
Achieving proper balance of speed and torque.
Easy maintenance
It gives low electric output
![Page 21: Power generation from speed breakers](https://reader035.vdocument.in/reader035/viewer/2022070313/554a5963b4c90531228b5065/html5/thumbnails/21.jpg)
SCOPE AND USES
This mechanism is very economical and easy to install.
Two protocols of this type of speed breakers are developed in India .not practically implemented till date.
Practically implemented in New Jersey , China and Indonesia.
Lots of researches and investigations are going on to practically utilize this technique
By doing proper arrangements we may generate high power electricity
![Page 22: Power generation from speed breakers](https://reader035.vdocument.in/reader035/viewer/2022070313/554a5963b4c90531228b5065/html5/thumbnails/22.jpg)
CONCLUSION The existing source of energy such as coal, oil etc
may not be adequate to meet the ever increasing energy demands. These conventional sources of energy are also depleting and may be exhausted.
These are some non-conventional methods of producing energy. This is a one step to path of exploring the possibilities of energy from several non-conventional energy sources.
![Page 23: Power generation from speed breakers](https://reader035.vdocument.in/reader035/viewer/2022070313/554a5963b4c90531228b5065/html5/thumbnails/23.jpg)
REFERENCES C. K.Das1,S. M.Hossain2,M. S.Hossan3 "Introducing Speed Breaker
as a Power Generation Unit for Minor Needs"Informatics, Electronics & Vision (ICIEV), 2013 International Conference on 17-18 May 2013.
ASWATHAMAN.V,PRIYADHARSHINI.M"EVERY SPEED BREAKER IS NOW A SOURCE OF POWER",2010 International Conference on Biology, Environment and Chemistry IPCBEE vol.1 (2011) © (2011) IACSIT Press, Singapore.
Alok Kumar Singh,Deepak Singh,Madhawendra Kumar,Vijay Pandit,Prof.SurendraAgrawal "Generation of Electricity through Speed Breaker Mechanism"International journal of innovations in Engineering and Technology(IJIET) volume issue 2 April 2013.
Parul Bisht,Rajni Rawat,"Electricity Generation through Road Ribs using law of Electromagnetic Induction" Conference on Advances in Communication and Control Systems 2013 (CAC2S 2013)
![Page 24: Power generation from speed breakers](https://reader035.vdocument.in/reader035/viewer/2022070313/554a5963b4c90531228b5065/html5/thumbnails/24.jpg)
THANK YOU