-
8/12/2019 Pumps-Yantai Gemsun Import and Export Co,.Ltd
1/21
7/22/14 Pumps-Yantai Gemsun Import and Export Co,.Ltd.-Boiller accessories,Mining machinery,Packaing machine,Pumps valves motor,Solar power,Cereals Oil m
www.gemsunmachine.com/Productview.asp?id=311
Home About us Products Service Contact us
Oil and Fats
Oleochemical
Auxiliary Equipment
Power Plant
>> Products>> Auxiliary Equipment>> Pumps
Pumps
ZA chemical pump
Introduction:
ZA standard chemical process pump is designed and produced according to API610 and VDMA24297
(light/medium) s tandard. It can convey sulphuric acid, nitric acid, hydrochloric acid, and phosphoric acid,
etc. inorganic acids and organic acid wi th all kinds of temperatures and thickness , and all kinds of liquid
petrochemical products, organic compound, and other corrosive liquids. It is widely used in refinery,
petrochemical industrial coal process ing engineering, low temperature engineering, paper-making
industry, sugar-making indus try, water supply plant, sea-water desalination plant, power plant,
environment engineering and shipping indus try, etc.
Performance:
Caliber25-400mm
Q: 5.5-2600m3/h
H: 16-250m
Working press ure P 2.5MPa
Working temperature T-80-+450
Model
e.g.ZA40-160ZAO40-160
ZA- chemical process pumpshrouded impeller
http://www.gemsunmachine.com/About.asp?id=338http://www.gemsunmachine.com/About.asp?id=397http://www.gemsunmachine.com/About.asp?id=377http://www.gemsunmachine.com/About.asp?id=339http://www.gemsunmachine.com/About.asp?id=373http://www.gemsunmachine.com/About.asp?id=377http://www.gemsunmachine.com/About.asp?id=369http://www.gemsunmachine.com/About.asp?id=363http://www.gemsunmachine.com/About.asp?id=345http://www.gemsunmachine.com/About.asp?id=340http://www.gemsunmachine.com/About.asp?id=339http://www.gemsunmachine.com/About.asp?id=338http://www.gemsunmachine.com/index.asphttp://www.gemsun.com/ -
8/12/2019 Pumps-Yantai Gemsun Import and Export Co,.Ltd
2/21
7/22/14 Pumps-Yantai Gemsun Import and Export Co,.Ltd.-Boiller accessories,Mining machinery,Packaing machine,Pumps valves motor,Solar power,Cereals Oil m
www.gemsunmachine.com/Productview.asp?id=311 2
40-pump outlet diametermm
160pump impeller diametermm
MZAOpetrochemical process systemopen impeller
Structure:
It is s ingle-stage, horizontal, radial split casing pum p. Pump body has two types: foot support (ZA type)
and central support (ZAH). It is s ingle-stage radial im peller, axial suction and radial discharge.
According to its operating conditions, it may use front, back seal ring and balancing hole in its hydraulic
balance. Its s tuffing box has cooling or heating pipe joint. Its shaft seal uses stuffing seal and s ingle-
end or double-end mechanical s eal. From its drive end, pump is clockwise rotation. Its materials refer to
the table of corrosion resis tant alloy materials of CZ-type pump.
CZ chemical pump
Instruction:
CZ chemical process pum p is horizontal single-stage single-suction cantilever centrifugal pump; its s ize
reaches DIN24256/ISO2858standard.
It can convey low-temperature or high-temperature liquid, neutral or corrosive liquid, clear liquid or the
liquid with solid particles. It is widely used in chem icals, fertilizer, petroleum, metallurgy, electric power,
paper-making, pharmacy, and synthetic fibre, etc.
Performance
1Q:2000m3/h
2H:160m
3Working pressureP2.5Mpa
4Working temperatureT-80-300
5Smooth characteristic curve, low cavitation, and high efficiency. Under non full-load, it still can keep
these characteristics.
Design:
1. Its installation s ize and base are des igned according to international standard, and it can replace
import pump.
2. Its inlet and outlet are put at same axis, which is good for design and process connecting pipe;
3. Bearing bracket including axes, impeller and s tuffing box etc forms an as sem bly, so its pump body
neednt be dism antled from pipe when in repair. It uses lengthened coupling, so its motor neednt be
dismantled.
4. The pressure at the place of shaft seal is compensated by balancing hole on its blades or im peller.
Its shaft seal can us e soft stuffing seal (cooling or not cooling), or all kinds of s ingle or double
mechanical seal.
5. Durable ball bearing and enough s ize of shaft diameter ass ure balancing operation.
Parts of pump bodies are designed into double volute to balance radial force.
-
8/12/2019 Pumps-Yantai Gemsun Import and Export Co,.Ltd
3/21
7/22/14 Pumps-Yantai Gemsun Import and Export Co,.Ltd.-Boiller accessories,Mining machinery,Packaing machine,Pumps valves motor,Solar power,Cereals Oil m
www.gemsunmachine.com/Productview.asp?id=311 3
Conveying m edium:
1. sulphuric acid, nitric acid, hydrochloric acid, and phosphoric acid, etc. inorganic acids and organic
acid with all kinds of temperatures and thickness ;
2. sodium hydroxide and carbonic acid etc alkaline dope under various temperatures and thicknesses;
3. All kinds of salt solutions;
4. all kinds of liquid petroleum and chemical products, organic compounds and other corrosive
materials and products;
Now our factory has the following anti-corrosive materials such as 303305306307316316L
904904L804ECR alloyNicr alloyHastelloyCD-4MnCu and titanium alloy, etc., which can
meet the requirement of various media. When ordering, please you provide us with the details of
conveying media.
Mode
CZ32-160A
M-standard chemical process pump
Diameter of 32-pump dischargemm
nominal diameter of 160-impellermm
After A-homotype impellers are cut at one time, its perform ance param eter is reduced.
AY oil pum p
AY-type oil pum p is reconstructed on the bases of old Y-type oil pum p. It is new product which is to meet
modern cons truction and to adapt to the updating of energy-saving centered equipment.
Characteristics:
1. Its bearing body uses 45, 55, 70 bearing body instead of 35, 50, 60 bearing body, which is m ore
reliable;
2. Water power over-current post adopts water-power m odel of high-efficient energy-saving pump; its
efficiency is 58higher than that of old Y-type oil pump;
3. AY-type oil pump has s ame s tructural model, ins tallation size and scope of performance parameter
with old Y-type oil pump, which is good for the reconstruction of old device.
4. Its parts are universal highly. Its universal s tandard parts are s hared by several series ;
5. Its main body adopts type materials and its bearing body, etc include two materials: cast steel
and cast iron, which provide good conditions for its use in cold areas, opening condition and boat.
6. According to pumps different use temperatures, its bearing includes : air cooling, fan cooling and
water cooling. Fan cooling is applied to the areas where it is lack of water or has poor water quality.
Performance:
Q=2.5600m3h
H30330m
Temperature T=-45+420
-
8/12/2019 Pumps-Yantai Gemsun Import and Export Co,.Ltd
4/21
7/22/14 Pumps-Yantai Gemsun Import and Export Co,.Ltd.-Boiller accessories,Mining machinery,Packaing machine,Pumps valves motor,Solar power,Cereals Oil m
www.gemsunmachine.com/Productview.asp?id=311 4
AY-type oil pum p is used in the conveying of petroleum, liquefied petroleum gas and other medium in
petroleum refinery, petrochemical, and chemical industry and other fields.
Model:
50AY602B 250AYS 150C
50250-inlet diameter (mm)
A-firs t reconstruction, Y-centrifugal o il pum p, S-first impel ler double-suction,
material code of over-current partsI-class HT12547-class ZG25-class
ZG1Cr13Ni.
60, 150-single-stage lift (m) 2-stage
Bthe orders of C-impel ler cutting times are represented by A, B......
Structure:
AY-type oil pum p has s ix models : single-stage single-s uction cantilever type, double-stage single-
suction cantilever type, single-stage double-s uction cantilever type, single-stage double-s uction double-
support type, double-stage double-suction double-support type and double-s tage single-suction
double-support type. Structural models: (fig. 1fig. 6)
Its shell is radially split type. It is suitable to the conveying of high-temperature, high-pressure,
flammable, explosive, noxious liquid. Its ins tallation type is horizontal centerline support. Its inlet and
outlet flanges are ins talled on its pum p body, vertical and upward. Shaft seal (stuffing box) is combined
pump cover, and includes two seals : stuffing seal and mechanical s eal (balancing type, bellow type and
tandem type). There are alternative water channel jackets outside s haft seal. Equipment of water
channel has special requirement or it is used when its m edium is water temperature above 66and
hydrocarbon temperature over 150.
The impeller is mono-block cast and s tatic balancing. Its axial force is balanced by impellers balancing
hole.
Its bearing body has a s et of radial ball bearing and back-to-back ball thrust bearing. Its bearing adopts
oil s linger oil lubricating system. There is radiator outside bearing body, which may adopt air cooling (T
120),fan cooling (T=120260) and water cooling (T260-42).
In order that it can dismantle rhachis , shaft, bearing and shaft seal, etc. with no need of dismantling
suction or dis charging pipe when repairing the pump, AY-type oil pum p uses flexible membrane type
lengthened coupling.
F type stainless steel pump
Uses
It is applied to the conveying of the corrosive liquids with no s olid particle. Medium temperature:
-20-160; Pressure at its inlet: less than 6MPa; Scope of flow rate: 2m3/h to 400m3/h; Range of lift:
15m to 105m ; Lower limi t of lift after changing down: up to 3m
-
8/12/2019 Pumps-Yantai Gemsun Import and Export Co,.Ltd
5/21
7/22/14 Pumps-Yantai Gemsun Import and Export Co,.Ltd.-Boiller accessories,Mining machinery,Packaing machine,Pumps valves motor,Solar power,Cereals Oil m
www.gemsunmachine.com/Productview.asp?id=311 5
Structure
It is s ingle stage s ingle suction cantilever centrifugal pump. Its main components include: pump
body, pump cover, impeller, s haft, bracket, and coupling, etc. Its s tructure includes two kinds: front
opening door and back opening door. Front opening door means that pump body fixes, its impeller can
be taken out by its inlet; reversely, it is called as back opening door. Bearing is rolling bearing, which
adopts grease lubrication.
Shaft seal:
According to users requirements, seal cavity may install s ingle-end mechanica l seal or double-end
mechanical seal.
Drive:
Pump uses jaw coupling, which is driven by prime m over. Looking at the pump through the end of
prime m over, pump is counterclockwise rotation.
Materials:
According to its corros ion res istance and appl ication temperature, the materials at its main
components include:
1Cr18Ni9(B) Cr28(E) Cr18Ni12Mo2Ti(M)
Supply range of complete set
1. pump1
2. prime m over1
3. base: 1, coupling cover: 1
4. spare partsimpeller 1shaft cover 1junk ring 2 or 1 AY AYP centrifugal oi l pumps
G type high silicon-cast iron pump
Scope of application:
High-sil icon cast iron pum p is applied to the conveying of sulphuric acid, nitric acid, mixed acid,
phosphoric acid, chromic acid and hypochlorous acid, etc. acid, salt, alkali and l iquid medicine. It has
strong corrosion resistance.
Scope of performance:
Flow rate36-191m3/h
Range of lift16-60m
Temperature0-100
Pressure0.6Mpa
Structure:
Single stage s ingle suction suspens ion structure, grease lubrication, and flapper type loose flange.
Shaft seal:
-
8/12/2019 Pumps-Yantai Gemsun Import and Export Co,.Ltd
6/21
7/22/14 Pumps-Yantai Gemsun Import and Export Co,.Ltd.-Boiller accessories,Mining machinery,Packaing machine,Pumps valves motor,Solar power,Cereals Oil m
www.gemsunmachine.com/Productview.asp?id=311 6
Stuffing seal, single-end and double-end mechanical s eal .
IH standard chemical flow pump
APPLICATION:
Non-ferrous metallurgy: in production line of electrolyte for electrolyte copper and nicks ,acid fog liquid of
cubit,ammonium vanadate for vanadium,pumping acid and thiourea liquid for gold.
Iron and steel industry: for treatment of electroplating,pickling process,and was te acid.
Acid indus try: in production line of nitric acid,sulfuric acid,hydroch-loric acid,phosphoric acid,acetic acid.
Basic industry: in production line of A amm onium salt for soda and sodium hydroxide,common
temperature sodium hydroxide for chlorine,chlorine products and chlorate,hypochlorite.
Petrochemical in dustry: in production line of antic aldehyde,oil tefining,alkyl-benzene.
Synthetic fiber and platic industry: in production line of Dacron,polyvinyl chloride,textile,textile printing.
Paper and pulp industry: pumping paper boiling liquid and bleaching solution.
Chemical fertilizer industry: in production line of urea,amm onium nitrate.
Pharmaceuticals industry: in production line of semi-finished products for medicine and pesticides.
Environmental protection: pumping acid fog liquid.
Ocean Engineering: in desal ination plant and extract oil in the sea,for seas ide electric power
station,vacuum s alt-made.
MATERIALS:
Depending on the liquid pumped the components contacted with the liquid are manufactured in the
following materials:
1Cr18Ni9Cr28Cr18Ni12Mo2TiTA2OCr20Ni25Cu2(904),OOCr20Ni42Mo3Cu2(804).
OOCr18Ni12Mo2(316L), STSi15RSTNiCr202
SHAFT SEALING:
Depending on the purchasers requirnent the packedstuffing boxes,single or doubt faces mechanical
seals can used all shaft seat.
ISG Serial single stage single suction pipeline centrifugal pump
-
8/12/2019 Pumps-Yantai Gemsun Import and Export Co,.Ltd
7/21
7/22/14 Pumps-Yantai Gemsun Import and Export Co,.Ltd.-Boiller accessories,Mining machinery,Packaing machine,Pumps valves motor,Solar power,Cereals Oil m
www.gemsunmachine.com/Productview.asp?id=311 7
Use:
1. ISG vertical pipe centrifugal pump is used in the conveying of clear water or other liquids sim ilar as
clear water in its physical chem ical property. It is widely applied to water supply and drainage of industry
and city, supercharging water s upply of highrise building, garden sprinkling irrigation, fire-control
supercharging, remote transportation, warm refrigeration cycle supercharging and equipment match.
Application temperature T80C.
2. IRGGRGvertical hot-water (high temperature) circulating pump is widely used in boiler high-
temperature hot-water supercharging circulating conveying and city heating s ystem of energy, chemical,
metallurgy, weaving, paper-making, and hotel , etc. Application temperature T120C.
3. IHG vertical pipe chemical pump is us ed in corrosive liquids without any solid particle and s imilar as
water in its viscos ity. It is widely applied to petroleum, chemical, m etallurgy, electric power, paper-
making, food, pharmacy and synthetic fibre, etc. Application temperature -20C120C.
4. YG vertical pipe oil pum p is used in the conveying of gasoline and coal oil , etc. Application
temperature -20C120C.
Characteristics:
1. vertical structure, same caliber s ize of inlet and outlet, same central line, it can be installed ins ide
pipeline like valve, compact and handsom e appearance, small floor space, low building cos t. It it is
added protective cover, it can be us ed outside.
2. Its im peller is installed on the lengthened lifting shaft of its m otor. It has short axial size and compact
structure. Its configuration of pump and m otor bearing is reasonable, which can balance the radial and
axial load caused by running of ballast pump to assure balancing operation, small vibration and low
noise.
3. Its axial seal adopts mechanical seal or the combination of mechanical seals . It uses import titanium
alloy sealing ring, medium high-temperature resis tant mechanical seal, hard alloy material and wear
resis tant seal, which can prolong the service life of mechanical s eal effectively.
4. It is eas y to install and maintain, without dism antling pipeline system. As long as you dism antle the
nuts of pump deck, you may draw out all rotors.
5. It uses tandem or parallel operation according to its use requirem ents in its flow rate and lift.
6. It may use vertical or horizontal installation according to i ts requirements in its pipeline layout.
Working conditions:
1. Suction pressure1.0MPaor max. working pressure1.6MPathat is, pump inlet pressure +
pump lift1.6MPatest pressure of pump s tatic pressure test press ure 2.5MPa. When ordering,
please you specify working pressure. When working pressure of pump system is m ore than 1.6MPa,
you mus t specify specially so that we use cast s teel material in its overflowing part and connecting part.
2. Ambient temperature40Crelative temperature95%
3. The volume of solid particles of medium is less than 0.1% of unit volume. Particle size0.2mm
NotesIf the medium has sm all particles, please you specify when ordering so that we use wear-
-
8/12/2019 Pumps-Yantai Gemsun Import and Export Co,.Ltd
8/21
7/22/14 Pumps-Yantai Gemsun Import and Export Co,.Ltd.-Boiller accessories,Mining machinery,Packaing machine,Pumps valves motor,Solar power,Cereals Oil m
www.gemsunmachine.com/Productview.asp?id=311 8
resistant mechanical seal.
MBY centrifugal pump
APPLICATION:
Type MB-Y centrifugal pumps are used for pumping corrosive liquids containing no solid particles. The
temperature of pumped medium are from -20 ~140.The s tandard range of the pump includes
capacities Q 3.6 m3/h -360 m3/h,against total head s H 15m-41m .When speed is reduced for
operation,the lowes t head may teach to 6m.
CONSTRUCTION:
The main components and parts of Type MB-Ysingle-s tage,sing le-suction vertical subm erged
centrifugal pumps have pump casing,pump cover impeller,shaft,connecting pipes,bearing bracket and
coupling etc.The shaft of pump is supportedby the roller bearing which are lubricated by grease.
DRIVE:
The pumps are driven by the driver through the jaw coupling.The rotating direction of the pump is
counter clockwise,when viewed from the driver end.
MATERIALS:
According to their abilities of corrosion-res istance and operating temperature,the materials of main
parts of Type MB-Y pump m ay be classified into those categories shown following table.
Materials 1Cr18Ni9Ti Cr18Ni9Mo2Ti
No.of grade B M
MJ series corrosion-proof pump
MJ series corrosion-proof pump is single-s tage,single-suction,and cantilever centrifugal pump,its
mark,specified properties ,size,etc.are all conformed with the s tandard GB5662-1985,equivalent to
-
8/12/2019 Pumps-Yantai Gemsun Import and Export Co,.Ltd
9/21
7/22/14 Pumps-Yantai Gemsun Import and Export Co,.Ltd.-Boiller accessories,Mining machinery,Packaing machine,Pumps valves motor,Solar power,Cereals Oil m
www.gemsunmachine.com/Productview.asp?id=311 9
ISO2858-1975.It is the same kind as IH type popularized by the State.
USE:
Rite produced with chlorine alkali:
Nonferrous m etallurgy: transport electrolytic liquid of electrolyzed copper and nickel,acid droplet used to
produce cobalt.ore pulp used to produce zinc,amononium vanadate used to produce vandalium,acid
and thiacetazone us ed to produce gole,etc.
Iron and steel industry: electroplating,caid pickling,dispos al of waste acid,etc.
Acid-making indus try: nitric acid,sulphuric acid,hydrochloric acid,phosphoric acid,acetic acid,etc.
Petrochemical indus try: acetaldehyde refined with petroleum,making of alkylbenzol.
Synthetic fibre and plas tic industry: production of polyester fibre and polyvinyl chloride,textile,printing
and dyeing industry.
Paper-making industry: transtort steamed liquid of paper pulp and bleaching liquid.
Chemical fertilizer industry: production of carbamide and nitramine.
Pharmaceutical industry: production of medicines and pesticides.
Enviroment protection: transport acid droplet.
ML small discharge high lift pump
Application: The pump is m ainly used to transport clear or less than 2% s olid granule content neutral or
corrosive liquid at different temperatures.
For :
Refinery, petrochemical, coal process ing and low temperature project;
Chemical, papermaking, paper pulp and s ugar manufacturing industry;
Water supply plant, seawater desalination plant;
Heating and air-conditioning system;
Power plant, environmental protection project, shipping and offshore indus try.
Parameter:Capaci ty: Q 0.815m3/h
Head: H 12125m
Pressure: P 2.5MPa
Temperature: t -80+450
Structure:
The pump is cantilever, single-s tage, single-suction, and radial with flow in spiral. Pump body is
supported by the central line with axial suction and radial discharge. To drill holes with im peller is to
balance the axial force. Axle seal box has cooling or heating joints, and axle seal that adopts filling seal
and mechanical seal i s equipped with cooling, flushing, and seal liquid system. When disassem bly, it is
unnecessary to uninstall inlet and outlet pipes and motor.
http://dict.cnki.net/dict_result.aspx?r=1&t=seawater+desalination&searchword=%e6%b5%b7%e6%b0%b4%e6%b7%a1%e5%8c%96 -
8/12/2019 Pumps-Yantai Gemsun Import and Export Co,.Ltd
10/21
7/22/14 Pumps-Yantai Gemsun Import and Export Co,.Ltd.-Boiller accessories,Mining machinery,Packaing machine,Pumps valves motor,Solar power,Cereals Oil m
www.gemsunmachine.com/Productview.asp?id=311 10
The pump was designed and manufactured completely in accordance with the eight edition of GB5662
85 standard and AP1610 standard. The pipeline was des igned according to AP1 standard. In a view of
suction inlet, the pump rotates counterclockwise.
Transporting Medium:
Inorganic acids, including vitriol, nitric acid, hydrochloric acid, and phosphoric acid, at all
temperatures and concentrations;
Alkaline sointions, including s odium hydrate, sodium carbonate, at all temperatures and
concentrations;
All salt solutions ;
The liquid petrochemical products, organic compounds and other corrosive materials and products.
MLB aluminum process pump for aluminum industry
Abstract:
MLB low-abrasion process pump for aluminum industry is used to transport suspension with solidgranule (diameter less than 0.5mm, sometimes solid less than20mmis allowable) less than 35% (by
weight), as well as weak acid, weak alkali, or other weak corrosive sewage or slurry, etc. The
temperature can reach100if the medium is non-corrosive.
Parameter: Capacity:50m3/h900m3/h, Head20m100m
Application:
Production sewage from industrial and mining industries, urban domestic sewage and dejection;
Sewage from urban environmental-protection departments, rainwater, sewage blackout and
disposal;
Paste chemicals or sewage in chemical industry;
Irrigation with abrasive water (water with sedim ent from the Yellow River) in agriculture industry;
Liquid with sol id or corrosive liquid in metallurgy;
Hydraulic transportation of coal s lurry in coal mining indus try;
Hydraulic ash removal to coal burning units in power indus try;
The similar liquid in cement, mining, porcelain, founding, and sugar making industries, etc.
In accordance with the content of solid and the hardness of solid in transporting medium, the
process parts of pump can be made of HT250, ZG270-500, alloy nodular cast iron, or Cr15M03,
etc. Any special requirements shall be well listed in the contract.
Structure:
The series pumps include 64 specs in 26 varieties. The pump is composed of pump body, pump
cover, bearing body, pump bracket and rotor. It is with high generalization , steady operation and
easy maintenance and installation. The unique triangle and pentagon structure for pump body and
http://dict.cnki.net/dict_result.aspx?r=1&t=generalization&searchword=%e9%80%9a%e7%94%a8%e5%8c%96http://dict.cnki.net/dict_result.aspx?r=1&t=alloy+nodular+cast+iron&searchword=%e5%90%88%e9%87%91%e7%90%83%e9%93%81http://dict.cnki.net/dict_result.aspx?r=1&t=sodium+carbonate&searchword=%e7%a2%b3%e9%85%b8%e9%92%a0http://dict.cnki.net/dict_result.aspx?r=1&t=sodium+hydrate&searchword=%e6%b0%a2%e6%b0%a7%e5%8c%96%e9%92%a0http://dict.cnki.net/dict_result.aspx?r=1&t=alkaline+sointion&searchword=%e7%a2%b1%e6%80%a7%e6%ba%b6%e6%b6%b2http://dict.cnki.net/dict_result.aspx?r=1&t=phosphoric+acid&searchword=%e7%a3%b7%e9%85%b8 -
8/12/2019 Pumps-Yantai Gemsun Import and Export Co,.Ltd
11/21
7/22/14 Pumps-Yantai Gemsun Import and Export Co,.Ltd.-Boiller accessories,Mining machinery,Packaing machine,Pumps valves motor,Solar power,Cereals Oil m
www.gemsunmachine.com/Productview.asp?id=311 1
pump cover enable them sealed tightly and demountable. The inlet is in axial horizontal direction, and
outlet tangential vertical upward.
Bearing:
The pump adopts cylindrical roller bearing and thrust ball bearing, which enjoy strong bearing
capacity and low noise and can prevent pump axle from being influenced by the external conditions,
such as temperature variation.
Drive:
The pump is driven by motor through the elastic coupling, which is simple and reliable. In a view of
motor, the pump rotates counterclockwise.
Seal:
Dynamic seal and soft packing seal are normally combined. Dynamic seal, which is made up of the
back blade and back impeller of impeller, has good effect without cooling water for lubrication and
cooling, or without diluting slurry, or without cooling water. It is simple and easy to maintain. Soft
packing seal has long lifespan, normally more than half month. Mechanical seal also can be adopted
if the pressure of inlet is too high.
Hydraulic Design & Spectrum:
Impeller is normally closed, or can be made semi-open upon customers requirements. The impeller
made of quality material is with wide channel, strong throughout capacity, rational profile for blade,
high efficiency and good cavitation performance, large abrasion surplus to process parts, not easy
to scab or jam. The spectrum is dense with wide coverage. Most operating points that users need
can be found in the spectrum, which makes the operation more economical.
Model Interpretation:
6/8MLB46AK
6/8Diameter for inlet and outlet:8and6
MLBLow-abrasion single-shell process pump for aluminum industry
46Head (m)
AFootnote A or B means the derived pump after the 1st or 2nd impeller trim, no footnote for
prototype.
KFootnote K means open impeller, and theres no K for closed impeller.
MLH vertical diagonal flow pump
Abstract:MLH Vertical diagonal-flow pump was developed upon the advanced technology abroad.
It can be single-stage or double-stage, single-stage vertical centrifugal or diagonal-flow with guide
vane.
This series pumps are efficient with stable performance, small occupation, and no water pouring
http://dict.cnki.net/dict_result.aspx?r=1&t=prototype&searchword=%e5%8e%9f%e5%9e%8bhttp://dict.cnki.net/dict_result.aspx?r=1&t=thrust+ball+bearing&searchword=%e6%8e%a8%e5%8a%9b%e7%90%83%e8%bd%b4%e6%89%bfhttp://dict.cnki.net/dict_result.aspx?r=1&t=tangential&searchword=%e5%88%87%e5%90%91 -
8/12/2019 Pumps-Yantai Gemsun Import and Export Co,.Ltd
12/21
7/22/14 Pumps-Yantai Gemsun Import and Export Co,.Ltd.-Boiller accessories,Mining machinery,Packaing machine,Pumps valves motor,Solar power,Cereals Oil m
www.gemsunmachine.com/Productview.asp?id=311 12
before starting.
Capacity: 4005000m3/h
Head:95m
Pressure: 1.6MPa
Temperature: -20+125
Purpose: It can be used to transport clear or granule neutral or corrosive liquid in refinery, power
plant, boatyard, w ater treatment, supply and drainage system, etc.
Structural Features:
The pump is composed of the central rotary body and exterior shell with medium through in the
center and discharge in outlet, which highly shrunk its occupation. The pump is installed on base
seat through exit, and the rotary body is supported by the sliding bearing in pedestal and the bearing
in motor to reinforce the rational stiffness of rotor. The axial force is endured by thrust bearing in
motor. Adjusting nut or gasket can lift the axle, and bring in axial clearance on impeller to rotate the
rotary body. The adjacent pump axles, pump axle and motor axle are connected by rigid coupling.
Parameter:
Nominal Diameter: DN 350700mm
Capaci ty: Q 4005000M3/h
Head: H up to95m
Pressure: P 1.6MPa
Temperature: T -20
+125
Model Interpretation
MLH: Model number
B: Impeller type (Close: B, Open K)
35: Outlet diameter is divided by10mm
- 23: Single stage head m
2: Number of stage, no display for single-stage.
ML Small discharge high head pumps
Applica, tion: The pump is mainly used to transport clear or les s than 2% s olid granule content neutral or
corrosive liquid at different temperatures.
For
Refinery, petrochemical, coal process ing and low temperature project;
Chemical, papermaking, paper pulp and s ugar manufacturing industry;
Water supply plant, seawater desalinationplant;
Heating and air-conditioning system;
Power plant, environmental protection project, shipping and offshore industry.
Parameter:
Capacity: Q 0.815m3/h
Head: H 12125m
Pressure: P 2.5MPa
Temperature: t -80+450
Structure:The pump is cantilever, single-stage, single-suction, and radial with flow in spiral. Pump body is
supported by the central line with axial suction and radial discharge. To drill holes with impeller is to
balance the axial force. Axle seal box has cooling or heating joints, and axle seal that adopts filling
seal and mechanical seal is equipped with cooling, flushing, and seal liquid system. When
disassembly, it is unnecessary to uninstall inlet and outlet pipes and motor.
The pump was designed and manufactured completely in accordance with the eight edition of
GB566285 standard and AP1610 standard. The pipeline was designed according to AP1 standard.
In a view of suction inlet, the pump rotates counterclockwise.
Transporting Medium:
Inorganic acids, including vitriol, nitric acid, hydrochloric acid, and phosphoric acid, at all
http://dict.cnki.net/dict_result.aspx?r=1&t=phosphoric+acid&searchword=%e7%a3%b7%e9%85%b8http://dict.cnki.net/dict_result.aspx?r=1&t=seawater+desalination&searchword=%e6%b5%b7%e6%b0%b4%e6%b7%a1%e5%8c%96 -
8/12/2019 Pumps-Yantai Gemsun Import and Export Co,.Ltd
13/21
7/22/14 Pumps-Yantai Gemsun Import and Export Co,.Ltd.-Boiller accessories,Mining machinery,Packaing machine,Pumps valves motor,Solar power,Cereals Oil m
www.gemsunmachine.com/Productview.asp?id=311 13
temperatures and concentrations;
Alkaline sointions, including sodium hydrate, sodium carbonate, at all temperatures and
concentrations;
All salt solutions ;
The liquid petrochemical products, organic compounds and other corrosive materials and products.
MLYA vertical sewage pump
Abstract:
MLYA Long-shaft underwater pump, one of the s ingle-stage s ingle-suction pum ps, is a newly energy-
saving and environmentally-friendly product we developed independently by absorbing the advanced
technique abroad upon the market requirements. When the depth of immers ion reaches 2m , spindle
structure is adopted to prolong the depth to 7m. It is mainly used in cement plant, power plant, sewage
disposal and petrochemical industries.
Executive Standard:
ISO 2858 Axial suction centrifugal pump (16bar) - Marking rated performance and size.
GB565685 Single-stage s ingle-suction chemical centrifugal pump technical conditions.
GB/T321491Determination of capacity of water pump.
GB/T321689 Test method for centrifugal pum p, mixed-flow pump, axial-flow pump, and vortex
pump.
Model Interpretation:
M: Company Code
LYA: Series Code
40: Outlet Diameter
160: Impeller Nominal Diameter
2: Depth of Immers ion
Parameter:
Nominal Diameter: DN 15150 mm
Capaci ty: Q 2400 m3/h
Head: H 5100 m Pressure: P 1.6 MPa
Temperature: T -20+125
Structural Feature:
The new hydraulic model for im proving pumps efficiency;
The new and reliable spindle;
The unique balancing chamber;
Wadding seal and pipeline flushing;
New material and technique for improving products reliabi lity and prolonging pumps lifespan.
MUH self-sucking pump
http://dict.cnki.net/dict_result.aspx?r=1&t=sodium+carbonate&searchword=%e7%a2%b3%e9%85%b8%e9%92%a0http://dict.cnki.net/dict_result.aspx?r=1&t=sodium+hydrate&searchword=%e6%b0%a2%e6%b0%a7%e5%8c%96%e9%92%a0http://dict.cnki.net/dict_result.aspx?r=1&t=alkaline+sointion&searchword=%e7%a2%b1%e6%80%a7%e6%ba%b6%e6%b6%b2 -
8/12/2019 Pumps-Yantai Gemsun Import and Export Co,.Ltd
14/21
7/22/14 Pumps-Yantai Gemsun Import and Export Co,.Ltd.-Boiller accessories,Mining machinery,Packaing machine,Pumps valves motor,Solar power,Cereals Oil m
www.gemsunmachine.com/Productview.asp?id=311 14
eneral
Type MUH self-priming pum p is designed with the advanced technology of forced air-liquid separation of
Japan.
Type MUH self-priming pump is s ingle stage,single suction,horixontal centrifugal pump,whoseassembling dlimension conform to ISO2858.
Type MUH self-priming pum p has universal performance,its efficiency,NPSH,Self-priming characters are
superior to other types of Self-priming pump.
Characteristics of type MUH self-priming pum p
(1) Type MUH self-priming pum p has siple construction no vulnerable to have trouble esay to
maintance.
(2) Type MUH sel f-priming pump does not need bottom valve,vaccum pump,gas seperater ect.Auxiliary
equipments.Except for first start,does not need to fill liquids so eas y to operate.
(3) Type MUH sel f-priming pump has high adility to recovery,allow gas contained in the liquid strong
capability of suction.
(4) Type MUH sel f-priming pump has flat curve high efficiency no vulnerable to cavitate.Self-priming principle
Self-priming principle
Before start-up there is a certain quantity of liquid in the pump after start with the rota-tion of im peller and
the centrifugal force,the liquid is thrown into of the back liquid cavity for recirculation.During the
continuous circulation,the air in the s uction pipe will be taken to the circulating liquid then from air-liquid
separating cavity to separate,the air is exhausted theough the air exhausted eye,while the liquid return
back to the impeller inlet for recirculation continue like this until completely exhausted all the air in the
suction pipe(see drawing1).
Scope of performance
The capacity of MUH self-priming pump can reach 400 m3/htotal up to 80m, the tem perature of
pumped liquids is -20~125,the maxuaccum rate can reach 500~700mm Hg.
The Max.self-sucpion lift decreases with the increasement of vapour pressure,and is in inverse
proportion with liquid gravity.
Application
Type MUH self-priming pump is used in petrochemical,metallurgy,light,industry power
electronical,pharmacy,textile,environment,sea and foodstuff etc.various fielda for pumping low or high
temperatured,neutral or corrosives,clean or solid containde liquids.type MUH self-priming pum p is
especially suitable for pumping liquids contained gases frequently start,stop or moving operation.
Material
To satisfy the customers ,material of hydraulic parts of type MUH can select anti-cor rosive material
-
8/12/2019 Pumps-Yantai Gemsun Import and Export Co,.Ltd
15/21
7/22/14 Pumps-Yantai Gemsun Import and Export Co,.Ltd.-Boiller accessories,Mining machinery,Packaing machine,Pumps valves motor,Solar power,Cereals Oil m
www.gemsunmachine.com/Productview.asp?id=311 15
according to the corrosion-res istant characteristlcs,operation temperature,liquid dens ity etc.besides the
ordinary 1Cr18Ni9(B);1Cr18Ni12Mo2Ti;Cr28(E);HT200(H).
7Shaft sealing
Type MUH self-priming can adopt stuff packing single face mechanical sealing and douboe face
mechanical sealing.
8Rotation
Type MUH self-priming pump are driven through the jaw coupling,the rotating direction of this pump is
clockwise viewed from the drive end.
9Ordering ins tructions
(1)Pump size,pump material,type of shaft sealing as well as driver should be determined according to
the service condition and capacity.Total head suction pressure the nam e of the medium specific gravity
and temperature of medium should be specified when prdering.
(2)If special m otor is required the customer should specify the explosive proof grade rated
output,frequency and voltage etc.
(3)If the customer requires to the mechanical sealing should be specified by customer in ordering.
(4)If spare parts are requird,the customer should specify his requirements .
MZJ centrifugal slurry pump
MZJ type centrifugal slurry pump:
Introduction:
High-efficient wear-resis tant slurry pump is single-s tage single-suction, axial suction cantilever
horizontal centrifugal pump, which is widely used in the conveying of abrasive or corrosive slurry with a
great amount of solid materials in the fields of m etallurgy, mine, electric power, coal mine, water
conservancy, chemical, light industry, and petroleum, etc.
1. Its over-current parts adopt high-s trength wear-resistant materials , which is applied to the conveying
of the slurry with strong corrosiveness, high-dens ity and big particle. Within pumps maximum workingpressure, it may adopt multilevel tandem.
2. According to different medium, it has all kinds of interchangeable over-current part, which is applied to
the slurry with abrasiveness or corrosiveness and big or smal l particle.
3. Meaning of model: e.g. MZJ65-20-40
MZJhigh-efficient abrasive slurry pump
65outlet diam etermm
20range of liftm
40flow ratem3/h
Structure:
MZJ type pump, except for its head (including fore-and-aft pump case, scroll case, fore-and-aft cover
-
8/12/2019 Pumps-Yantai Gemsun Import and Export Co,.Ltd
16/21
7/22/14 Pumps-Yantai Gemsun Import and Export Co,.Ltd.-Boiller accessories,Mining machinery,Packaing machine,Pumps valves motor,Solar power,Cereals Oil m
www.gemsunmachine.com/Productview.asp?id=311 16
sheet, impeller etc), is sim ilar in other parts, which adopt same drive system.
1. Head: MZJ type pump is double pump cases structure, that is, foreand-aft pump case and
changeable over-current part (including im peller, scroll case, and fore-and-aft cover sheet). According to
working press ure, its fore and-aft pump case are made by gray iron or ductile cast iron, which are
vertical and central spl it, and are connected by bolt. After pump case has seam allowance and bracket,
which are connected by bolt. Its discharge opening m ay be ins talled rotarily. Fore-and-aft cover sheets
with back blades can reduce leakage and enhance pum ps service life and efficiency. Its inlet is
horizontal direction, and its drive direction is clockwise rotation.
2. Seal shaft: accessory impeller seal, stuffing seal and mechanical seal
(1). Accessory impeller s eal: when positive pressure of its inlet is less than 10% that of its outlet, its
primary pump of single-stage or multi-stage in series use accessory impeller seal, which cant dilute
slurry and has good seal effect.
(2). Stuffing seal: it is featured by its sim ple s tructure and easy maintenance. It needs s eal water. For the
working conditions that arent suitable to accessory impeller seal and pump s uction, it may use s tuffing
seal.
(3). Mechanical seal : for the working conditions that arent suitable to above two shaft seals, it uses
mechanical seal to reduce the maintenance of its s haft seal.
Drive part:
This pump s eries use sam e drive system, including its bracket and bearing module. Its pump shaft has
big diam eter, good rigidity and short cantilever, which cant bend and vibrate under bad working
conditions. Its bearing uses single-row tapered roller bearing and deep groove ball bearing, and its
combined use can bear maximum axial and radial loading. Its bearing uses oil lubricating. Seal covers
at both ends of its bearing body can keep slurry, etc from the bearing. Its bearing body has two rubber
hose couplings , which can be connected with water source to cool bearing chamber; so it can assure
bearings s afe running and long service life under high temperature.
SH series double suction centrifugal pump
SH centrifugal pump is used in the conveying of the clean liquid under 80C without solid particle.
Performance:
Flow rate Q112m3/h6250m3/h
Lift H9m140m
Allowable in let pressure0.3MPaUser must specify pump inlet pressure when ordering.
Structure:
Horizontal central opening type, single-s tage, double-suction impeller; suction and discharge pipe are
cast with pump body at its lower part; it is easy to check pump rotor, without dismantling pipeline and
engine.
Shaft seal:
It has soft stuffing seal and mechanical seal. It has changeable shaft cover.
-
8/12/2019 Pumps-Yantai Gemsun Import and Export Co,.Ltd
17/21
7/22/14 Pumps-Yantai Gemsun Import and Export Co,.Ltd.-Boiller accessories,Mining machinery,Packaing machine,Pumps valves motor,Solar power,Cereals Oil m
www.gemsunmachine.com/Productview.asp?id=311 17
Drive:
Through resilient shaft coupling, it drives pump by motor. From the drive end, pump is counter-clockwise
rotation. (According to your special requirements, we can supply clockwise rotation pump.)
Bearing and equilibrator:
Bearing (fluid bearing or sliding bearing) is installed at its ends . Its axial force is balanced by double-
suction impel ler. Its res idual axial force is balanced by rolling bearing. Its fluid bearing us es non-grease
lubrication. Its sl iding bearing uses oil lubricating.
Materials
Materials at the parts in touch with medium:
HT2002535steelICr18Ni9,Cr28,Cr18Ni12Mo2Ti,TA2(Titanium)
OCr20Ni25Cu2(904),OOCr20Ni42M03Cu2(804),
OOCr18Ni12Mo2(316L),STSi15Rhigh-silicon cast ironSTNiCr202(nickel cast iron)
OCr18Ni9(304)
Shielding motorelectric pump
Abstract:
YB, YBP shielding flame-proof three-phase asynchronous motors are normally known as s hielding
motor for pump or shielding motor for short. Pumps impeller i s directly installed to motors axle, and it
forms a sealed chamber (shielding electric pump) when being put into pump. Still seal replaces rotary
seal, which solves the leakage for comm on pump on propeller axle. The shielding motor is featured by
absolute sealing, reliable operation, low vibration and nois e, easy maintenance, and remote operation,
and more important, it improves operators working condition to guarantee body safety and prevent
peoples property from los ing. It plays an im portant part in atomic energy, chemical, air-conditioning, and
heating industries, etc.
The shielding pump, which is composed of this shielding motor and pump, is used to transport liquid
without solid, especially virulent, corrosive, radioactive, flammable, or explosive liquid, or liquid atexpensive price, or liquid that will bring in great harm if leaking.
YP Shielding motor (shielding three-phase asynchronous motor) is suitable to work under the condition
without explosive gas mixture; YBP Shielding m otor (flame-proof shielding three-phase asynchronous
motor) is suitable to work under the condition with explosive gas m ixture, and forms flame-proof
structure ExdBT3, ExdBT4 in accordance with GB3836.1-2.
The motor can be installed both vertically and horizontally:
Motors Shell: IP 55
Rubber jacket cable for connection.
Standard material for parts of motor that contact medium:
1. Shield Sleeve: 1Gr18Ni9Ti;
-
8/12/2019 Pumps-Yantai Gemsun Import and Export Co,.Ltd
18/21
7/22/14 Pumps-Yantai Gemsun Import and Export Co,.Ltd.-Boiller accessories,Mining machinery,Packaing machine,Pumps valves motor,Solar power,Cereals Oil m
www.gemsunmachine.com/Productview.asp?id=311 18
2. Axle: 1Gr17Ni2;
3. Gasket: PTFE;
4. Bearing: Phenolic impregnated graphite or furan resin;
5. Bearing sleeve, back impeller: Overlaying cobalt-chromium-tungsten alloy or spraying Ni-base
wearing-proof alloy upon 1Gr18Ni9Ti basal body;
6 Other material: 1Gr18Ni9Ti (1Gr17Ni2 for mos t fasteners).
The motors basic s tructure is that a layer of non-magnetic stainless s teel sleeve (called shielding
sleeve) is soldered to the plates of s tator cavity and rotator exterior surface to shield s tator and rotator
respectively from mediums imm ersion and corrosion. Motors rotator cavity is connected to pump cavity,
and filled with pumping liquid. The liquid recycles inside m otor to cool the motor (also lubricate bearing).
Cooled-water jacket is ins talled around motor seat to control water to cool motor.
Normal temperature shielding or flame-proof shielding three-phase asynchronous motor is leading a
sm all amount of pumping liquid to back bearing through filter, then to front bearing through the gap
between stator and rotator, and finally to pumps inlet for recycle.
High temperature shielding or flame-proof shielding three-phase asynchronous motor is also leading a
sm all amount of liquid from the joint of heat shielder and motor, through the cooling coiled pipe of water
jacket, the gap between s tator and rotator, and front bearing, then to the joint of heat shielder and m otor,
and back to cooling coiled pipe for recycling. A back impeller is installed on rotator to transport the
recycled liquid, and a heat shielder is installed between motor and pump to avoid motor from heating.
SPP mixed flow pump
Capability range:
Capacities: Q upto 7000m 3/h
Heads: H upto 25m
Operating temperatures: P -20+120
Application:
Compuls ory circulating media pumps for breeding.
Sea water pumps for breeding living things.
Pumps for filte plant.
In shortm,whatever clean or slightly polluted,chemically neutral or aggres sive liguids have to be
transported economically in large quantities and wi th low delivery hesds .
Characteristics:
Favourable energy consumption thanks to the high efficiency.
Practically uniform power requirement over the complete performance range:the pump can the refore
operate with closed valves with out overloading the drive motor.
Due to the large cross s ections minimal risk of clogging.
-
8/12/2019 Pumps-Yantai Gemsun Import and Export Co,.Ltd
19/21
7/22/14 Pumps-Yantai Gemsun Import and Export Co,.Ltd.-Boiller accessories,Mining machinery,Packaing machine,Pumps valves motor,Solar power,Cereals Oil m
www.gemsunmachine.com/Productview.asp?id=311 19
Robust cinstruction and long wording life.
Horizontal des ign:
Pump of ipull-outi design,i.e.the pipework does not have to be disconnected for inspection and
dism antling of the impeller and shatt seal.The precision-machined pump shaft sleeve in the stuffing box
area.The oil level in the bearing hous ing is controlled by way of a constantleveloiler.
The easily access ible styuffing-box with soft packing can also be s upplied with a seal ring and seal
liquid.
The integrally-cast feet of the casing transmit any forces originating from the pipework directly to the
foundation.This means that the rotor is not s ubject to any bending and optimal working life of the
bearings is assured.
The flange dimens ions of the tangential,vertical delivery branch and the axial suction branch for the
sizes up to and including 35-40 are in accordance with NEN 5802/DIN 2532(Nominal Press ure
1.0MPa)and the larger pumps according to nominal pres sure 0.6MPa.
Direction of rotation of the pump:clockwise,when viewed from the driven end.
Electric motors or combustion engines m ay be employed for the drive.
To facilitate venting of the suction pipe,the pump s et can be provided with a cpm plete venting device.
Type of shaft sael:
Being fitted with either stuffing-box packing or double mechanical s eal.
TCF cantilever submerged pump
Abstract:
Slurry pump is a key equipment in the process of production of ammonium phos phate. To satis fy the
technique of production of amm onium phosphate in China, we developed TCF slurry pump to make the
related equipment further localized. The pump is suitable for the transportation of slurry with particles or
crystallization. In addition to the production of amm onium phosphate, the pump is widely used in
chemical fertilizer, mining, coal-chemical, and sewage dispos al industries , etc.Structure:
The pump is vertical with cantilever, rigid axle and without sl iding bearing, which completely overcomes
the quick abrasion for subm erged bearing.
The bearing is compos ed of a set of radial thrust ball bearings and a radial bearing, which form the
double support of pump and im prove its reliability during operation.
Material:
Since the pump is used for transporting medium with more solid or crystallization, its main parts can be
made of the following material(by consideration of abrasion res istance):
CD-4MCu Cr30 M02Ti 1Cr18Ni9
Direction for Installation:
-
8/12/2019 Pumps-Yantai Gemsun Import and Export Co,.Ltd
20/21
7/22/14 Pumps-Yantai Gemsun Import and Export Co,.Ltd.-Boiller accessories,Mining machinery,Packaing machine,Pumps valves motor,Solar power,Cereals Oil m
www.gemsunmachine.com/Productview.asp?id=311 20
I. Installation:
1. The foundation shall be s olid;
2. It is not allowed to load the whole weight of pipelines to pump;
3. After installation, put level meter on pump soleplate to check if pumps axle is vertical t to the horizontal
plane, with tolerance 3mm per 1m.
II. Start:
1. Before start, there should be enough lubrication grease in bearing box, about 1/2 of capacity of
bearing chamber, and turning should be s mooth;
2. Checking if pump is in the sam e rotary direction as that stated on plate.
III. Operation:
1. During operation, the temperature for bearing shall not be higher than 70;
2. If theres any fault, such as noise, vibration, the pump shall be s topped for checking.
VI. Shutting Down:
ZLH propeller pumps
Structural Feature:
In accordance with lifting line theory and design experience of propeller, we developed axial-flow pum p
with circulation in radial way and had model experiment internally . Comparing with s imilar pum ps, it is
featured by light weight, small volume, good rigidity and high efficiency, etc.
Seal:
Radial vibration within 0.05mm in the seal chamber guarantees the reliability and endurance of seal and
prolongs m aintenance period. It can be equipped with wadding seal and s ingle-end/double-end
mechanical seal, and dynamic seal for special purpose.
Gasket seal can adopt synthetic rubber, such as VITON. The wadding can adopt quality anticorrosive,
anti-abrasion material, such as asbes tos, carbon fiber, flexible graphite, etc.
Material:All process parts are made of 1Cr18Ni9, 1Cr18Ni12Mo2Ti, 0Cr20Ni25Mo3Cu2, lncolloy825, Monel 400
904L 316L.
ZLH axial-flow pump is mainly used in the s ites with large flowage and low head, especiall y in the forced
recycling systems for making salt or alkaline.
Parameter List:
Spec Capacitym3/h Headm Rotate Speed(rpm)
ZLH200 300600 3.58.5 2900
ZLH300 460900 2.753.5 1450
ZLH350 7601500 4.85.5 1450
ZLH450 13002000 4.05.5 850
ZLH500 20003000 3.25.2 800
-
8/12/2019 Pumps-Yantai Gemsun Import and Export Co,.Ltd
21/21
7/22/14 Pumps-Yantai Gemsun Import and Export Co,.Ltd.-Boiller accessories,Mining machinery,Packaing machine,Pumps valves motor,Solar power,Cereals Oil m
ZLH600 30004000 2.44.8 650
ZLH700 40006500 3 5 750
ZLH800 60009000 3 5 750
ZLH900 900011000 3 4.5 580
Steam driven reciprocating pump
Model 2QS is a horizontal, reciprocating pump with double cylinder,steam-driven, used for water feeding
for boiler or mine drain
parameter
Newmodel
Oldmodel
Dia ofsteam
cylindermm
Dia ofwater
cylindermm
Reciprocatingstrokemm
Q
(m3/h)
Reciprocatingtime
per min
Dia of couplingmm
Steamin
outWater
inout
2QS-3.5/17 QB-2 80 50 75 2.4 75 10 15 25 20
2QS-4.8/17 QB-3 115 70 102 3-6 38-70 15 20 50 40
2QS-9/17 QB-4 133 89 127 5-11.5 30-64 20 32 65 40
2QS-15/17 QB-5 152 102 152 6-16.5 39-63 25 32 80 50
2QS-21/17 QB-6 190 110 200 11-20.5 30-50 40 50 100 80
2QS-29/17 QB-7 190 130 200 16.5-29.5 30-50 40 50 100 80
2QS-53/17 QB-9 250 150 250 22.5-44 26-45 50 65 125 100
2QS-63/17 QB-11 300 180 360 58-63 24-40 50 65 150 100
Parameter for high pressure pumps
model Dia of steamcylindermm
Dia ofwater
cylindemm
Reciprocatingstroke
mm
Q
m3/h
Reciprocatingtime
per min
Dia ofcouplingmm
dimension
Steamin
outWater
inout
2QS-9/25
52 80 152 55 30-60 20 40 65 40 1124*406*526
2QS-53/25
25 130 25024-40
30-60 50 65 125 1001515*652*787
Home About us Products Service Contact us
Copyright (c) 2009Yantai Gemsun Import and Export Co,.Ltd.All rights res erved.
http://www.gemsunmachine.com/About.asp?id=345http://www.gemsunmachine.com/About.asp?id=340http://www.gemsunmachine.com/About.asp?id=339http://www.gemsunmachine.com/About.asp?id=338http://www.gemsunmachine.com/index.asp