Download - reda cv update 02, July, 2016
1
Reda Mohamed Rashad Donia Kafr Sonbat – Zefta- Gharbeyi - Egypt
Tel: 0405760982 Mob:002 01021596710 00966536225530
E-mail : [email protected] : [email protected] Aramco Approval SAP # 70017138 PERSONAL INFORMATIOM Nationality : Egyptian Gender : Male Date of birth : 23/3/1983 Marital status : Married and I have two children. Military statues : Finally Exemption
EDUCATION B.SC. In mechanical engineer. Power section, Alazhar University Cairo May 2006. Grade : Excellent
Graduation Project:-
Homogeneous charge compression Ignition engine (HCCI)
Grade : Excellent.
Computer Background • Good experience of operating system Microsoft Win XP, Win vista. • Good knowledge about Microsoft office package (Excel, word, power point). • Good knowledge with internet, (e-mail, searching).
Language • Arabic: mother tongue • English: Fluent {Written & Spoken}
Certificates
• Certified CSWIP welding inspector level-2, certification No 64889, valid up to 21 April 2017.
• Visual inspection testing. (VT) ASNT- level II. • Radiographic testing. (RT) ASNT-level II. • Ultrasonic testing. (UT) ASNT- level II. • Magnetic particle testing. (MT) ASNT- level II. • Liquid penetration testing. (PT) ASNT- level II.
TRAINING Fertilizers and Chemicals Factory of Delta, July 2005. GAPCO , 13/7/2005
2
Material codes and standards: DIN- BS-ASME II- ASME B36.10- ASME B36.19- ASME B16.5- ASME B16.9-
ASME B 16.11- ASME B 16.25 - ASME B16 .34- ASME B 16.47- ASME B16.10- ASTM- API 5L , ARAMCO specification.
Welding, Construction codes and standards: ASME II- ASME V- ASME VIII - ASME IX – ASME B31.3- API 1104- API 650- API 653
Work Experience WORK HISTORY:
now: till 2014 SeptemberFrom: ManagerPosition : QC
Aramco Approval SAP # 70017138
The QCM is responsible for keeping and maintaining all records related to personnel, supplies, equipment use, and equipment calibration and sampling. His function will be to ensure compliance with the contract plans and specifications.
Responsibilities include:
• Performing and documenting field inspections. • Preparing daily Quality Control Reports. • Preparing weekly two week look ahead and submitted to client and monthly report for all activities. • Scheduling, reviewing, certifying, and managing project submittals. • Providing coordination of required quality control testing, reviewing results, and submitting. • Coordinating, documenting, and tracking preparatory, initial, and follow-up inspections. • Training welder's according to ASME sec. IX and AWS D1.1. • Performance qualification test and performed by third party with client. • Monitoring all inspection requirements daily with the Q/C inspectors. • Daily meeting to check the inspection plan in the same direction we assumed. • Solve the problems regarding to welding, piping, pressure vessels with stand up the standard and technical wise and point of view. • Weekly meeting with the contractor/client for checking review the inspection problems last week. • Reporting and get alarms for the management for any technical issues not matching with client requirements or standard. • Tracking construction deficiencies and ensuring timely corrective action. • Reviewing calibration of test equipment (as necessary). • Coordinating responses to vendors’ requests for information and technical issues. • Serving as main point of contact at the site for client questions and discussions on quality and technical issues.
Project : CLEAN TRANSPORTATION FUELS AT RIYADH REFINERY
3
Scope of work:- - Installation and erection of steel structure for main pipe racks and all
equipment’s with all inspection activities. - Fabrication and installation and laying of GRE & RTR underground Pipes
with all inspection activities. - Installation and laying of cement lined CS underground pipes with all
inspection activities. - Installation and laying of aboveground pipes (CS & SS & AS) with all
inspection activities. - Installation and erection of rotating & static equipment’s with all inspection
activities.
January 2014 up 15 September 2014:From: Position : QC Supervisor
Aramco Approval SAP # 70017138
Responsibilities include:
• Performing and documenting field inspections. • Preparing daily Quality Control Reports. • Preparing weekly two week look ahead and submitted to client and monthly report for all activities. • Scheduling, reviewing, certifying, and managing project submittals. • Providing coordination of required quality control testing, reviewing results, and submitting. • Coordinating, documenting, and tracking preparatory, initial, and follow-up inspections. • Training welder's according to ASME sec. IX and AWS D1.1. • Performance qualification test and performed by third party with client. • Monitoring all inspection requirements daily with the Q/C inspectors. • Daily meeting to check the inspection plan in the same direction we assumed. • Solve the problems regarding to welding, piping, pressure vessels with stand up the standard and technical wise and point of view. • Weekly meeting with the contractor/client for checking review the inspection problems last week. • Reporting and get alarms for the management for any technical issues not matching with client requirements or standard. • Serving as main point of contact at the site for client questions and discussions on quality and technical issues.
Project : CLEAN TRANSPORTATION FUELS AT RIYADH REFINERY
4
Olayan Descon Industrial Co. Ltd.
Olayan Descon Engineering Company. TEL: 00966(3) 341-0671 - FAX: 00966(3) 341-0950 - TLX: 832089 ODICO SJ
Organization: OLAYAN DESCON INDUSTRIAL CO. LTD.
Position: QC Engineer
30 Nov. 2013TO Aug. 201228 From:
Brief Description of job responsibilities:
: - Responsible for Preparation for Quality Control & Quality Assurance Procedures, NDE Reports, QC
Dossiers/Inspection Records. Coordination / Follow up with QC Inspectors for site inspection activities. Responsible for Liaise with client inspector and / or their nominated representative
regarding all activities related to the inspection at site Checking for consistency with Isometric Drawing as to size, rating and material. Material traceability (Fitting, Pipe & Consumable Material). Spool marking and welds marking. Inspection of Piping fabrication and erection according to client’s specification and
Code B31.1, B31.3, B31.8 Pre- and Post-welding Inspections. Witness of Welder Qualification Test (WQT) according to ASME IX. Control of welding material (Electrode, Filler Wire) backing of Low Hydrogen
Electrode Monitor welder performance and welding activities to ensure work is being carried
out in accordance with the qualified & approved welding procedure. Visual inspection of welding. Monitor all NDT (PT, MT) according to client’s specification and Codes. Confirmation for the achievement of all required inspection through Construction
Management System (CMS) in computer. Preparing of the Test Packages, QA/QC Format, and Reports. Verification of punch list after rectification. Monitoring Inspection of Hydro test. Responsible for the preparation of QC Documents.
Project Experience
Water industrial treatment plant at Yanbu city
GAN to PTC Jubail‐2
5
Repair of Heat Exchangers
.
Standby Pump for Warm Flare Blow Down Pump P-1901 at YANSAB
Re-Tubing For Heat Exchangers at PETRO RABIGH.
November Turn Around 2013 Modifications Proposals at LUBEREF.
DR PLANT MODULE A/B SHUTDOWN Installation of On/Off valve on the Butane Inlet Line of the Mixed Butane Sphere (84V1).
Re‐tubing for heat exchanger.
Installation of New Flare Line From Olefins Storage Area To Existing LP Polyethylene Elevated Flare Header.
Diversion Of Glycol Condensate From (V-41222) To
Suction Of EO Striping Column Reflux Pump (P-41311).(
Divert P-41623 A/B (MFG Column Hot Well Pump)
Effluent From C-41531 (First Effect Evaporator) Feed To
C-41610 (Drying Column) Feed Line In EOEG Plant.
Inter Connection of neutralization sump SU41975 and
process water sump SU41970.
Condensate Hammering Piping Modification Project @
MTBE Plant.
6
Aug. 2012Till 1020.FebFrom
Client: Egyptian sponge iron &steel CO. (ESISCO) BESHAY STEEL. Sub Contractor: Project Company.
Job Title: QC Engineer & Welding & PIPING Inspector. Perform Inspection as per Approved ITP. Project Procedure as per Client
Specification & Standards. Material Receiving Inspections as per P.O, MTC with Heat Numbers. Perform Piping Dimensional Inspection as per IFC. Prepare Surveillance Inspection Report, NCR that Violates the Codes & Project
Standards. Review / Prepare Piping Test Packages. Ensure satisfactory identification of materials, proper protection of piping and
fittings. Verify proper size and schedule of pipe, rating of flanges, proper flange face and fittings.
Witnessing of Re-in forced pad test and flush grinding of orifice flanges. Check flow direction arrows on valves; verify that the properly identified valves are
installed in accordance with the flow diagram. Ensure that pipe supports, hangers and guides have been installed in accordance
with the piping drawings and the pipe support details. Confirm the piping system concurs with flow diagrams to verify completeness of
system. Lines checking against drawing requirements to ensure completeness and accuracy
of the piping system as per the code and project standards. And to incorporate the punch list with category "A & B" items.
Verify initiation of field piping and equipment pressure test punch list. Ensure completion of cat "A" punch list items prior to Pressure test. Verify preparation of testing package including piping test record.
Check and assure that all joint are exposed for examination during pressure test. Ensure that isolation or disconnection of equipment not to be used. Check vents are open when filing and draining lines.
Verify that control valves and other items that were removed for the test are replaced. Check that water has been removed from check valves.
Verification of closed punch items and conduct walk through for each completed piping system prior to mechanical acceptance.
Painting and insulation inspections from surface to final visual inspection of the equipment’s and pipelines.
Responsible for modification of piping drawings such as revisions. Verification of test packages Witnessing of leak testing such as hydro test, pneumatic test, etc. Inspection of welding and piping in assigned area Line checking inspection t test packages and punch listing Witnessing flushing of test packages Re-instatement inspection of packages Listing and rectifying check of re-instatement punch list Witnessing of leak testing such as hydro test, pneumatic test, etc. Witnessed testing of pressure safety valves Make sure subcontractor observes safety procedure and job site activity regulations
and oblige them to eliminate dangerous situation. Check the correct installation of special pipe support and the use of correct type of
standard support in accordance with the information shown on the drawing.
7
Follow up welder’s performance qualification according to ASMI IX & AWS D1.1. Perform inspection before welding (review fitting up of joints, welding electrodes,
dimension check according to isometric drawing, gas shielding and other variables according to WPS), during, and after welding.
Perform inspection activities on all welding activities in plant like (VT, RT, MT, and PT) & interpretation the films.
Ultrasonic thickness measurements for flow lines to make hot tapping and follow up welding for this hot tap.
Record all modification on master copy of drawing for the future use in the as-built drawing
Keep up date copies of all drawings related to work supervised and maintain, in separate file superseded copies.
Reviewing final documentation.
Projects: Project Name Country Contractor Type of Work
Air separation plant “OXYGEN PLANT” EGYPT
PROCESS PIPING
Direct reduction of iron “DRI PLANT” EGYPT
PROCESS PIPING & PRESSURE VESSELS
No. 2 (Long products melt shop) “LMS PLANT”
NO. 2 (Water treatment plant) EGYPT
PROCESS PIPING
LIME STONE PLANT EGYPT
PROCESS PIPING
Fire fighting network EGYPT
PROCESS PIPING
Natural gas lines EGYPT
PROCESS PIPING
From August 2006. To January 2010
Client: Belayim Petroleum Company (Petrobel Port said).
Contractor: Petro jet Company.
Job Title: Welding & Piping Inspector.
8
Activities:
Performed QC Welding Inspection in accordance with approved quality plan, QCP per applicable code of Practice.
Ensure that approved WPS are employed in production, process and activities. Maintain QA/QC activities, records and documents. Reviewed NDT reports and HYDROTEST PACKAGE. Witnessed Hydro Testing as per required working pressure (x1.5 for the test
pressure). Ensure proper dimensions are carried out upon the fabrication prior to welding. Verified fabricated spools/pipe as per AFC and P&ID drawing. Involves in mechanical material’s inspections as per job requirements per client and
industry standards. Witnessing TIE-IN activities as per approved tie-in procedures. Follow up welder’s performance qualification according to AGIP specs. In work shop. Perform inspection before welding (review fitting up of joints, welding electrodes,
dimension check according to isometric drawing, gas shielding and other variables according to WPS), during, and after welding.
Perform inspection activities on all welding activities in plant like (VT, RT, MT, and PT) & interpretation the films.
Ultrasonic thickness measurements for flow lines to make hot tapping and follow up welding for this hot tap.
Projects: Project Name Country Contractor Type of Work
NITROGEN PLANT EGYPT
PROCESS PIPING
turbo compressors EGYPT PROCESS PIPING
low temperature separation (LTS). EGYPT PROCESS PIPING
Slug catcher & receiving trap EGYPT PROCESS PIPING
Personal Criteria
Dynamic, Self-motivated, Active, Hard Working, Creative, Smart, Presentable Appearance; Has Excellent Inter-personal and Communication Skills, Ability to Work under Pressure Wish to explore my desire to apply for available position within your reputable company
(References & supporting documents available upon request)