Download - Roxtec_Product_Overview_2011-2012_GB.pdf
-
7/30/2019 Roxtec_Product_Overview_2011-2012_GB.pdf
1/8
We Seal Your World
PRODUCT OVERVIEW
-
7/30/2019 Roxtec_Product_Overview_2011-2012_GB.pdf
2/8
Rectangular solutions
Wedge Clip
Assembly GelCM EMC modules
Frame
LubricantCM modules
Frame
RM modules
Wedge
Stayplate
Lubricant
Frame
www.roxtec.com
-
7/30/2019 Roxtec_Product_Overview_2011-2012_GB.pdf
3/8
RS seal
RM modules
Lubricant
LubricantFrame
Round solutions
Kit including all components
Round solutions for single cable or pipe
Thanks to Multidiameter, our flexiblesolution based on sealing moduleswith removable layers, we can alwayssupply you with a kit containing allnecessary components to create acomplete seal. Any frame or seal inour product range can be delivered asa tailored kit. To simplify your work,a selection of our products is onlyavailable in kits complete sealingsolutions!
Kit solutions
Sleeve (optional)
www.roxtec.com
Sleeve (optional)
-
7/30/2019 Roxtec_Product_Overview_2011-2012_GB.pdf
4/8
RM module
Roxtec sealing systemModules
Round frames/seals
S frame
RM module kit
R X sealRS OMD sealRS sealR frame
ComPlus frameKFO frameG frameB frame
GHM frameSF frameSRC frame
Rectangular frames
Waveguide core
CF 8 frame CF 24 frame
C KFO frame
CF 16 frameCF 32 frame
CM module
Swan Neck frame
SBTB frameSK frame
www.roxtec.com
RS PPSback-to-back seal
RS PPS/Ssingle-side seal
EzEntryComSeal
ComShelt
-
7/30/2019 Roxtec_Product_Overview_2011-2012_GB.pdf
5/8
DD Cover
StayplateWedgeWedge kit
GE extension frame
Assembly parts
Accessories
Entry plate
RG M63 tools
C StayplateC WedgeC Wedge kit
Lubricant Assembly Gel
Sleeves with/without flange
Casting mould Casting mould
Sealing strips
Top packingpuller
Stayplate clamps
Pre-compressionwedge
Pre-compressiontool
Stayplateclips
Pre-compressioneccentric tool
Top packingpuller adapter
ModuleAdaption Indicator
Pre-compressionhandgrip tool
RTM Software CAD Library EMC marking tool
www.roxtec.com
SE PPS extensionframe
RS X seal RG M63 sealC RS T seal CRL seal
Pressure Test Pipe
-
7/30/2019 Roxtec_Product_Overview_2011-2012_GB.pdf
6/8
C Compression unit ES
EMC rectangular frames
Roxtec EMC sealing system
Assembly parts
RM ES module RM PE B moduleRM PE moduleRM ES B module
S frame
StayplateWedgeWedge kit
SF frame G frame
Wedge cover ES
CM ES module CM PE module
CF 16 frame EMCCF 32 frame EMCCF 8 frame EMC
EMC modules
C Compression unitIP/PE
Lubricant/Assembly Gel
Roxtec Ex sealing systemFor product range, please contact your local Roxtec supplier, email: [email protected], or visit www.roxtec.com.
EMC round frames/seals
RS PE sealRS ES sealR frame EMC
www.roxtec.com
B frame ComSeal EMC
-
7/30/2019 Roxtec_Product_Overview_2011-2012_GB.pdf
7/8
1 C
6
2
3 7
A
4
8
0.11.0 mm
0.0040.039"
B
5
9 10 11
How it works
Make sure that the inside surfacesof the frame are free from dirtor dust.
Lubricate all modules for the framethoroughly, both the inside and theoutside surfaces.
Before inserting the final row ofmodules, insert two stayplates.
Lubricate the inside surfaces ofthe frame with Roxtec Lubricant,especially into the corners.
Insert the modules according toyour installation plan (transit plan).It is recommended to seal cables/pipes at the bottom of the frameand put spare modules on top.
Separate the two stayplates andinsert the final row of modulesbetween the stayplates.
Adapt modules, which are to holdcables or pipes, by peeling off layersuntil you reach the gap seen in pic. B.The halves may not differ by more thanone layer.
Insert a stayplate on top of everyfinished row of modules.
Drop the upper stayplate on top ofthe modules.
Achieve a 0.11.0 mm gapbetween the two halves when heldagainst the cable/pipe.
Continue to fill up the packingspace of the frame, until one finalrow is left. See pictures Pack-ing space for the full size of thespace.
Lubricate all sides of the wedge spar-sely, except front and back. Pleaseread the markings on the wedge andturn it correctly before inserting it inthe top of the frame (standard posi-tion). Face with Stayplate this sidemust always face a stayplate.
Tighten the screws until full stop,approx 20 Nm (15 ft.lb.).
Attach the Wedge Clip to thewedge bolts to check that thewedge is properly tightened.
DISCLAIMERThe Roxtec cable entry sealing system (the Roxtec system) is a modular-based system ofsealing products consisting of different components. Each and every one of the componentsis necessary for the best performance of the Roxtec system. The Roxtec system has beencertified to resist a number of different hazards. Any such certification, and the ability of theRoxtec system to resist such hazards, is dependent on all components that are installed asa part of the Roxtec system. Thus, the certification is not valid and does not apply unlessall components installed as part of the Roxtec system are manufactured by or under licensefrom Roxtec (authorized manufacturer).
Roxtec gives no performance guarantee with respect to the Roxtec system, unless (I) allcomponents installed as part of the Roxtec system are manufactured by an authorizedmanufacturer and (II) the purchaser is in compliance with (a), and (b), below.
(a) During storage, the Roxtec system or part thereof, shall be kept indoors in its originalpackaging at room temperature.
(b) Installation shall be carried out in accordance with Roxtec installation instructions ineffect from time to time.
The product information provided by Roxtec does not release the purchaser of the Roxtecsystem, or part thereof, from the obligation to independently determine the suitability of theproducts for the intended process, installation and/or use.
Roxtec gives no guarantee for the Roxtec system or any part thereof and assumes noliability for any loss or damage whatsoever, whether direct, indirect, consequential, loss ofprofit or otherwise, occurred or caused by the Roxtec systems or installations containingcomponents not manufactured by an authorized manufacturer.
Roxtec expressly excludes any implied warranties of merchantability and fitness for a parti-cular purpose and all o ther express or implied representations and warranties provided bystatute or common law. User determines suitability of the Roxtec system for intended useand assumes all risk and liability in connection therewith. In no event shall Roxtec be liablefor consequential, punitive, special, exemplary or incidental damages.
-
7/30/2019 Roxtec_Product_Overview_2011-2012_GB.pdf
8/8
WeSealYourWorld
GB Productcatalogue
ProduktkatalogCatlogodeproductosCatalogueproduits
ES
FR
CN
DE
ue
ductosits
WeSealYourWorld
GB Productcatalogue
ProduktkatalogCatlogo deproductosCatalogue produits
ES
FR
CN
DE
rl
WeSealYourWorld
B Productcata ogue
rodukt atalogCat logo deproductosatalogue produitsi
S
FR
N
DE
We Seal YourWorld
GB Product catalogue
Produktkatalog
Catlogo de productosCatalogue produits
ES
FR
CN
DE
Roxtec International AB
Box 540, SE-371 23 Karlskrona, SWEDEN
PHONE+46 455 36 67 00, FAX+46 455 820 12
EMAIL [email protected], www.roxtec.com
Standard and customized solutionsThis index contains our standard
range of products. If you needhelp finding a special solution thatfits into your design or structure,please do not hesitate to con-tact your local Roxtec supplieror e-mail [email protected] for
Six module sizesOur adaptable solutionMultidiameter, based on sealingmodules with removable layers,makes installation easy and safe.The modules consist of two halvesand a center core. You can seal
Multidiameter by Roxtec
cables or pipes of several differentsizes simply by peeling off layersfrom the module halves, until a per-fect fit is achieved. If not removed,the center core turns the moduleinto a spare capacity unit.
guidance. The list of local Roxtec
representatives is available atwww.roxtec.com.
For more product information, see
the Roxtec Product Catalogue.
All rights reservedWe reserve the right to make changes to the product and technicalinformation without further notice. Any errors in print or entry are noclaims for indemnity. The content of this publication is the propertyof Roxtec International AB and is protected by copyright.