SIASA project
This project is funded by the European Union and implemented by EASA.
TE.GEN.00409-001
Training
Yannick DUMOLLARD Flight Operations & Training Technology Evolution – Impact on Airworthiness 23-24 September 2014, Windhoek, Namibia
Introduction
Training philosophy and availability
Training portfolio
Conclusion
23-24 September 2014 Technology Evolution - Impact on Airworthiness, Windhoek, Namibia 2
Agenda
23-24 September 2014 Technology Evolution - Impact on Airworthiness, Windhoek, Namibia 3
UNIQUE to AIRBUS
30 years of experience
Pioneering use of Fly-By-Wire technology and side stick
Standardized flight deck layouts and common systems
A consistent pilot-aircraft interface across aircraft types
Our people
4
33 Pilots
70 Flight instructors
100 Maintenance instructors
Toulouse 503
Miami 69
Hamburg 37
Beijing 9
Bangalore 3
More than 600 people worldwide
23-24 September 2014 Technology Evolution - Impact on Airworthiness, Windhoek, Namibia
Our activities in 2012/2013
5
> 300 COURSES
in Airbus training catalogue*
Over the last 2 years, we have trained…
> 2700 pilots
> 6300 engineers
> 1500 flight ops engineers
*with approvals from EASA, CAAC, TCCA, CASA, GCAA, FAA
23-24 September 2014 Technology Evolution - Impact on Airworthiness, Windhoek, Namibia
Introduction
Training philosophy and availability
Training portfolio
Conclusion
23-24 September 2014 Technology Evolution - Impact on Airworthiness, Windhoek, Namibia 6
Agenda
23-24 September 2014 Technology Evolution - Impact on Airworthiness, Windhoek, Namibia 7
Our training philosophy
Highly qualified instructors
Innovation in training concepts and technology
“Learning by doing” pedagogy
Competency-based training
Human factors
FOCUS ON SAFETY AND EXPERTISE
8
Commonality
* Projected and subject to approval from the Aviation Authorities
Cross Crew Qualifications path
11 days*
A340 A380
A320
A330
A350
15 days
15 days
11 days*
Common Type Rating path
Significant savings: Reduced costs of training
Reduced time off duty
MOBILITY and FLEXIBILITY within the AIRBUS Aircraft Families
Cross Crew
Qualifications
23-24 September 2014 Technology Evolution - Impact on Airworthiness, Windhoek, Namibia
9
Commonality
Cross Maintenance
Qualifications
CMQ Intra Family
A330
A380
A340
A320
A350 7 days*
CMQ Inter Family
* Projected and subject to approval from the Aviation Authorities
23-24 September 2014 Technology Evolution - Impact on Airworthiness, Windhoek, Namibia
Our training network
•Page 10
Worldwide training availability: when, where and how you want it
Extended regional development has started…
Singapore
Miami Toulouse
Mexico City
New Delhi
Beijing
Hamburg
Bangalore
New
23-24 September 2014 Technology Evolution - Impact on Airworthiness, Windhoek, Namibia 10
Introduction
Training philosophy and availability
Training portfolio
Conclusion
23-24 September 2014 Technology Evolution - Impact on Airworthiness, Windhoek, Namibia 11
Agenda
Our Training Portfolio
12
Flight Flight Operations Structure Maintenance Cabin
TRAINING SERVICES PORTFOLIO Providing services throughout the aircraft operational life
Key benefits One stop shop offer for all training needs
OEM expertise and fleet wide experience
Cost effective and local solutions
23-24 September 2014 Technology Evolution - Impact on Airworthiness, Windhoek, Namibia
13
Long Entry Level Training
Airbus Pilot Transition Training
Recurrent Training
Airbus Pilot Instructor Course
Ab initio pilots
Short Entry Level Training
Propeller aircraft pilots
Jet aircraft pilots
Airbus aircraft pilots
Airbus aircraft
instructor
Airbus aircraft pilots
Cross Crew Qualification
Flight training
FLIGHT TRAINING
FLIGHT OPERATIONS TRAINING
CABIN TRAINING
MAINTENANCE TRAINING
STRUCTURE TRAINING
Initial Operating Experience (IOE)
Upgrade to command
Technical Flight Familiarisation
Fleet technical pilot
Three engine ferry flight
Refresher and recency trainings
And more:
23-24 September 2014 Technology Evolution - Impact on Airworthiness, Windhoek, Namibia
14
Standard Transition training
Aircraft knowledge modules
Full Flight Simulator (FFS)
Ground Phase
SYSTEMS
KNOWLEDGE
Handling Phase
MANOEUVRES PROCEDURES
Airbus Pilot Transition (APT) trainer
23-24 September 2014 Technology Evolution - Impact on Airworthiness, Windhoek, Namibia
Flight Operations training
15
FLIGHT TRAINING
FLIGHT OPERATIONS TRAINING
CABIN TRAINING
MAINTENANCE TRAINING
STRUCTURE TRAINING
Weight & Balance engineer
Load control transition (passenger or freighter)
Dispatcher
Performance Instructor
Basic or Advanced Performance Engineer
Operator SMS
FDA Safety Analyst
Administration of Flight Operations manuals for engineers
FlySmart with Airbus Administrator
Administration of Flight Operations manuals for engineers
A350 / A380 ECAM Customization
Weight and Balance
Performance
Safety
EFB Management
Documentation and Procedures
Technology Evolution - Impact on Airworthiness, Windhoek, Namibia 23-24 September 2014
16
Cabin training
FLIGHT TRAINING
FLIGHT OPERATIONS TRAINING
CABIN TRAINING
MAINTENANCE TRAINING
STRUCTURE TRAINING
Type Specific Cabin training
Airbus Cabin Crew Instructor Course (ACIC)
Cabin Crew Enhanced FAP (Flight Attendant Panel)
Corporate Jet Cabin training
Crew Resource Management
Initial Operating Experience (IOE)
INTERACTIVE HANDS-ON LEARNING EXPERIENCE
Cabin Emergency Evacuation Trainer (CEET)
Flight Attendant Panel (FAP) trainer
Virtual handset trainer
Virtual cabin
Technology Evolution - Impact on Airworthiness, Windhoek, Namibia 23-24 September 2014
17
Maintenance training
FLIGHT TRAINING
FLIGHT OPERATIONS TRAINING
CABIN TRAINING
MAINTENANCE TRAINING
STRUCTURE TRAINING
Approved by the Airworthiness Authorities
Learning by doing by interactively operating inside simulated aircraft and cockpit
Reduced practice on aircraft to the strict minimum
ACT CONCEPT Airbus Competence Training
Technology Evolution - Impact on Airworthiness, Windhoek, Namibia 23-24 September 2014
18
Maintenance training
FLIGHT TRAINING
FLIGHT OPERATIONS TRAINING
CABIN TRAINING
MAINTENANCE TRAINING
STRUCTURE TRAINING
General Familiarization
Certifying courses
Recurrent training
Specialized courses
Initial Operating Experience (IOE)
Instructor course (AMIC)
Technology Evolution - Impact on Airworthiness, Windhoek, Namibia 23-24 September 2014
Structure training
19
FLIGHT TRAINING
FLIGHT OPERATIONS TRAINING
CABIN TRAINING
MAINTENANCE TRAINING
STRUCTURE TRAINING
Metallic and composite courses
Covering each stage of the damage assessment and repair workflow
Damage assessment courses
Standard and specialized practices courses
Repair engineering courses
Technology Evolution - Impact on Airworthiness, Windhoek, Namibia 23-24 September 2014
Focus on Composite training
20
Basic or Advanced Composite repair
Radome repair
Composite Repair Engineering
COMPOSITE COURSES
FLIGHT TRAINING
FLIGHT OPERATIONS TRAINING
CABIN TRAINING
MAINTENANCE TRAINING
STRUCTURE TRAINING
Technology Evolution - Impact on Airworthiness, Windhoek, Namibia 23-24 September 2014
Introduction
Training philosophy and availability
Training portfolio
Conclusion
23-24 September 2014 Technology Evolution - Impact on Airworthiness, Windhoek, Namibia 21
Agenda
Exploring new perspectives
22
e-Learning:
on your terms and at your pace
Same pedagogical content as in traditional Airbus training courses
Savings on travel and living expenses
Higher availability of staff
Mobile solutions:
bringing Airbus expertise at your place
To address initial and recurrent training needs
Reduced development costs, travel and living expenses
Creating value for customer’s business
Technology Evolution - Impact on Airworthiness, Windhoek, Namibia 23-24 September 2014
23-24 September 2014 Technology Evolution - Impact on Airworthiness, Windhoek, Namibia 23
Training Contact
Details of courses and prerequisites
Course planning
Discussing specific competences needs and requirements
For further information:
SIASA project
This project is funded by the European Union and implemented by EASA.
End slide