Download - sieve gradation
-
8/7/2019 sieve gradation
1/8
Gradation
123
tel: 1-800-323-1242 fax:1-970-663-9781 web:www.eleusa.com
Shakers 124Sieves 127 Sample Splitters 129
-
8/7/2019 sieve gradation
2/8
GradationS H A K E R S
124
tel: 1-800-323-1242 fax:1-970-663-9781 web: www.eleusa.com
Aggregate Screen Shakers
Screen size range from 4" to No. 200. Grades bulk samples up to 1 cu. ft. (0.03 m3) in minutes. Independently removable screen trays.
The Aggregate Screen Shaker is designed for sizing test samples of crushed stone,sand, gravel, slag, coal, ores, and other similar materials.The shaker will receive andgrade up to 1 cu.ft. (0.03 m3) of bulk materials in one operation.
The unit is designed primarily for sizing in the range of 4" down to a #4 screensize, and with smaller amounts of finer materials down to a #200.
The standard series shaker utilizes a manually-operated, threaded clamping rodarrangement to hold the screen trays during operation.The other series features ahydraulic pump clamping system for quick clamping and release of trays in just afew motions.
Both versions are supplied complete with five coarse series screen trays and adustpan tray.
SpecificationsCapacity. 1 cu. ft. (0.03 m3).
Motor. Capacitor-type; 1/3 h.p. with overload protection.
Tray Dimens ions . Screen Area: 1 4-3/4" x 22-3/4" (375 x 578 mm) .Overall: 18" x 26" (457 x 660 mm).
Trays. Steel wire cloth; five included: 2", 1-1/2", 1", 3/4",1/2" plus dustpan tray.
O verall Dimens ions . 23" w. x 31" d. x 43" h. ( 584 x 787 x 1,092 mm) .
Weight. Shpg. 500 lbs. (227 kg).
Ordering Information
Note: EI80-0405 series with hydraulic clamping system shown.
EI80-0400/02. With Manually-Operated Clamping. 115vAC, 60 Hz, 1.EI80-0400/01. With Manually-Operated Clamping. 230vAC, 50 Hz, 1.EI80-0405/02. With Hydraulically-Operated Clamping. 115vAC, 60 Hz, 1.EI80-0405/01. With Hydraulically Operated Clamping. 230vAC, 50 Hz, 1.
Special Note:Trays with an asterisk are supplied with Aggregate Screen Shakers as standard. If dif-ferent trays are desired, advise factory at time of order.
Tray Size ornumber
Mesh OpeningStandard Alternative(mm) (in.)
Coarse SeriesSteel Wire Cloth
Model No.
Medium & FineSeriesBrass Wire Cloth
Model No.
4" 100.00 4.000 EI80-0400/10
3-1/2" 90.00 3.500 EI80-0400/12
3" 75.00 3.000 EI80-0400/14
2-1/2" 63.00 2.500 EI80-0400/16
2" 50.00 2.000 EI80-0400/18*
1-3/4" 45.00 1.750 EI80-0400/20
1-1/2" 38.10 1.500 EI80-0400/22*
1-1/4" 31.50 1.250 EI80-0400/24
1" 25.00 1.000 EI80-0400/26*
7/8" 22.40 0.875 EI80-0400/28
3/4" 19.00 0.750 EI80-0400/30*
5/8" 16.00 0.625 EI80-0400/32
1/2" 12.50 0.500 EI80-0400/34*
7/16" 11.20 0.438 EI80-0400/36
3/8" 9.50 0.375 EI80-0400/38
5/16" 8.00 0.312 EI80-0400/40
1/4" 6.30 0.250 EI80-0400/42
#3-1/2 5.60 0.223 EI80-0400/44
#4 4.75 0.187 EI80-0400/46
#5 4.00 0.157 EI80-0400/48
#6 3.35 0.132 EI80-0400/50
#7 2.80 0.111 EI80-0400/52
#8 2.36 0.0937 EI80-0400/54
#10 2.00 0.0787 EI80-0400/56
#12 1.70 0.0661 EI80-0400/58
#14 1.40 0.0555 EI80-0400/60
#16 1.18 0.0469 EI80-0400/62
#18 1.00 0.0394 EI80-0400/64
#20 850 m 0.0331 EI80-0400/66
#25 710 m 0.0278 EI80-0400/68
#30 600 m 0.0234 EI80-0400/70
#35 500 m 0.0197 EI80-0400/72
#40 425 m 0.0165 EI80-0400/74
#45 355 m 0.0139 EI80-0400/76
#50 300 m 0.0117 EI80-0400/78
#60 250 m 0.0098 EI80-0400/80
#70 212 m 0.0083 EI80-0400/82
#80 180 m 0.0070 EI
80-0400/84#100 150 m 0.0059 EI80-0400/86
#200 75 m 0.0029 EI80-0400/88
Dustpan Tray EI80-0400/90
-
8/7/2019 sieve gradation
3/8
GradationS H A K E R S
125
tel: 1-800-323-1242 fax:1-970-663-9781 web:www.eleusa.com
ELE RotasiftTM Laboratory Sifter
Quiet and highly efficient with rotational sifting and tappingaction.
Sieves are simply laid in place with no clamping required.
Door safety switch prevents opening door while sifter is inoperation. Accepts 8" (203 mm) and 12" (305 mm) standard test sieves. Built-in 30 minute timer.
The ELE RotasiftTM Laboratory Sifter is designed to accept up to ten 8"(203 mm) diameter by 2" (50.8 mm) high or six 12" (305 mm) by 3" (76.2 mm)high standard test sieves and cover.
In addition to all of the features found in competitive models, the ELE RotasiftTM
incorporates an internal switch in the door for operator safety.This feature pre-vents the user from opening the unit while in operation.
SpecificationsCapacity. Ten 8" (203 mm) or six 12" (305 mm) diameter sieves
plus cover.
Timer. Built-in 30 minute.
Motor. 1/3 h.p.
Dimensions. 19.9" w. x 30.7" d. x 59" h. (505 x 780 x 1,500 mm).Width and depth dimensions are the base dimensions ofthe frame.
Weight. Net 175 lbs. (79.4 kg).
Ordering InformationEI80-0417/02. 110vAC, 60 Hz, 1.EI80-0417/06. 220vAC, 60 Hz, 1.EI80-0417/01. 220vAC, 50 Hz, 1.
Laboratory Sieve Shaker
Cost effective design for the efficient separation of materials.
Accepts 8" (203 mm) and 12" (305 mm) standard test sieves.
Built-in 30 minute timer.The new Laboratory Sieve Shaker is designed to accept up to eleven 8" (203 mmdiameter by 2" (50.8 mm) high or seven 12" (305 mm) by 3" (76.2 mm) high stan-dard test sieves and cover.
The unit is fitted with a 1/4 h.p. motor and 30-minute timer.
SpecificationsCapacity. Eleven 8" (203 mm) or seven 12" (305 mm) diameter sieves
plus cover.
Timer. Built-in 30 minute.
Motor. 1/4 h.p.
Dimensions. 14.5" w. x 18" d. x 48" h. (368 x 457 x 1219) mm.
Weight. Net 73 lbs. (33.2 kg).
Ordering InformationEI80-0455/02.
110vAC, 60 Hz, 1.
-
8/7/2019 sieve gradation
4/8
GradationS H A K E R S
126
tel: 1-800-323-1242 fax:1-970-663-9781 web: www.eleusa.com
Portable Sieve Shakers
Ideally suited for either laboratory or field use. Hand-operated version for use where electrical power is not
available. Inexpensive, yet efficient design for accurate separation of
materials.
Accepts up to 7 full height,8" (203 mm) diameter sieves, pluspan and cover. Supplied complete with belt guard on motorized versions.
Portable Sieve Shakers are available in either hand-operated or motorizedversions.They utilize a horizontal and vertical motion along with a tapping action.Spring loaded tie rods allow vertical motion.The shaker imparts a tap to the sievesat each change in direction as the sieve holders move from side to side. Inaddition, during each tap an upward jolt takes place. Proper separation of allmaterials takes place with the tapping action, allowing the materials to movequickly through the sieve meshes. Sample testing time is greatly reduced.Thiscombination of shaking actions assures an accurate sieving or grading test on largequantities of material.The shakers have a capacity of 7 U.S. Standard, 8" (203 mm)diameter sieves with pan and cover.
SpecificationsCapacity. 7 sieves, 8" (203 mm) diam., plus pan and cover.
Guard. Steel construction; supplied as standard on motorized versions.Motor. EI80-0445:1/4 h.p.;belt driven.
Dimensions. EI80-0440:12" w. x 13" d. x 33" h. (305 x 330 x 838 mm).EI80-0445:23" w. x 13" d. x 33" h. (584 x 330 x 838 mm).
Weights. EI80-0440:Net 42 lbs. (19 kg).EI80-0445:Net 63 lbs. (28.6 kg).
Ordering Information
Note: ModelEI80-0445 series shown.
EI80-0440. Hand-Operated.EI80-0445/02. Motorized. 110vAC, 60 Hz, 1.EI80-0445/06. Motorized. 220vAC, 60 Hz, 1.EI80-0445/01. Motorized. 220vAC, 50 Hz, 1.
Ro-Tap Sieve Shakers
Totally enclosed, vertically-mounted motor. Built-in 30 minute digital timer.
Ro-Tap Sieve Shakers are designed to accurately reproduce the circular andtapping motion of hand-sieving, but with a uniform, mechanical action to assuredependable and comparable test results.
SpecificationsCapacity. 6 full-height sieves, 8" (203 mm) diam., plus pan
and cover.Motor. 1/4 h.p.
Timer. Built-in; 30 minute digital timer.
Support Plate. Adjustable.
Dimensions. 28" w. x 21" d. x 25" h. (711 x 533 x 635 mm).
Weights. Net 165 lbs. (75 kg); Shpg. 185 lbs. (84 kg).
Ordering Information
Note: Shown with sieves; not included, order separately.
EI80-0420/02. For 8" (203 mm) Diam.Sieves. 110vAC, 60 Hz,1.EI80-0420/06. For 8" (203 mm) Diam.Sieves. 220vAC, 60 Hz,1.EI80-0420/01. For 8" (203 mm) Diam.Sieves. 220vAC, 50 Hz,1.
-
8/7/2019 sieve gradation
5/8
GradationS I E V E S
127tel: 1-800-323-1242 fax:1-970-663-9781 web:www.eleusa.com
U.S. Standard Testing SievesASTM E-11.
Unique epoxy fillet design ensures smooth and uninterruptedflow of material through sieving medium.
Constructed using the finest quality mesh. Certificate of conformity to ASTM standards supplied with
every sieve.
ELE Testing Sieves are built to last longer.Our unique epoxy fillet design assures auniform tautness and leaves no gap between the mesh and frame to trap material.Manufactured in one piece with no seams, they are solder-sealed to eliminatecrevices and to make the sieve opening precise.This not only makes them morecomfortable to handle since there are no raw edges, but also provides a smoothuninterrupted flow of material through the aperture with minimal loss.
Every ELE Sieve is meticulously checked and undergoes rigorous inspection ateach stage of manufacture to ensure that the product meets ASTM standards.The
certificate of examination that accompanies eve r y sieve is more than just a formalstatement of accuracy and performance on which you can depend; it is an assur-ance of outstanding quality, reliability, and strict adherence to testing standards.
SpecificationsFrames. 8" (203 mm) Diam.: Full height; 2" (51 mm) depth to mesh.
12" (305 mm) Diam.:Full height; 3-1/4" (82.5 mm) depth to mesh.
Construction. Polished and lacquered brass with S.S. mesh.
Nameplates . Show standard, a lternate and Tyler Screen Scale equivalentdesignations.
Weights. 8" (203 mm) Diam.: Net 1 lb. (453 g).12" (305 mm) Diam.: Net 4 lbs. (1.8 kg).
Sieve Analysis Test Set
Ordering InformationSet Includes 1 Each of sieves marked with an asterisk (see Sieves Table).
1 Fine Sieve Brush (79-7225).1 Wire Sieve Brush (79-7230).
EI4200.
U.S. Standard Testing Sieves Table
Sieve Size orNumberFine Series
1/4" 6.3 mm 0.250 EI79-5000 EI79-5800
No. 3-1/2 5.6 mm 0.223 EI79-5010 EI79-5810
No. 4 4.75 mm 0.187 EI79-5020* EI79-5820
No. 5 4.00 mm 0.157 EI79-5030 EI79-5830
No. 6 3.35 mm 0.132 EI79-5040 EI79-5840
No. 7 2.80 mm 0.111 EI79-5050 EI79-5850
No. 8 2.36 mm 0.0937 EI79-5060* EI79-5860
No. 10 2.00 mm 0.0787 EI79-5070 EI79-5870
No. 12 1.70 mm 0.0661 EI79-5080 EI79-5880
No. 14 1.40 mm 0.0555 EI79-5090 EI79-5890
No. 16 1.18 mm 0.0469 EI79-5100* EI79-5900
No. 18 1.00 mm 0.0394 EI79-5110 EI79-5910
No. 20 850 m 0.331 EI79-5120 EI79-5920
No. 25 710 m 0.0278 EI79-5130 EI79-5930
No. 30 600 m 0.0234 EI79-5140* EI79-5940
No. 35 500 m 0.0197 EI79-5150 EI79-5950
No. 40 425 m 0.0165 EI79-5160 EI79-5960
No. 45 355 m 0.0139 EI79-5170 EI79-5970
No. 50 300 m 0.0117 EI79-5180* EI79-5980
No. 60 250 m 0.0098 EI79-5190 EI79-5990
No. 70 212 m 0.0083 EI79-5200 EI79-6000
No. 80 180 m 0.0070 EI79-5210 EI79-6010
No. 100 150 m 0.0059 EI79-5220* EI79-6020
No. 120 125 m 0.0049 EI79-5230 EI79-6030
No. 140 106 m 0.0041 EI79-5240 EI79-6040
No. 170 90 m 0.0035 EI79-5250 EI79-6050
No. 200 75 m 0.0029 EI79-5260* EI79-6060
No. 230 63 m 0.0025 EI79-5270 EI79-6070
No. 270 53 m 0.0021 EI79-5280 EI79-6080
No. 325 45 m 0.0017 EI
79-5290EI
79-6090No.400 38 m 0.0015 EI79-5300 EI79-6100
Coarse Series
5/16" 8.0 mm 0.312 EI79-5500 EI79-6200
3/8" 9.5 mm 0.375 EI79-5510* EI79-6210
7/16" 11.2 mm 0.438 EI79-5520 EI79-6220
1/2" 12.5 mm 0.500 EI79-5530* EI79-6230
5/8" 16.0 mm 0.625 EI79-5550 EI79-6250
3/4" 19.0 mm 0.750 EI79-5560* EI79-6260
7/8" 22.4 mm 0.875 EI79-5570 EI79-6270
1" 25.0 mm 1.00 EI79-5580 EI79-6280*
1-1/4" 31.5 mm 1.25 EI79-5600 EI79-6300
1-1/2" 38.1 mm 1.50 EI79-5610 EI79-6310*
1-3/4" 45 mm 1.75 EI79-5620 EI79-6320
2" 50 mm 2.00 EI79-5630 EI79-6330*
2-1/2" 63 mm 2.50 EI79-5650 EI79-6350*
3" 75 mm 3.00 EI79-5660 EI79-6360*
3-1/2" 90 mm 3.50 EI79-5670 EI79-6370*
4" 100 mm 4.00 EI79-5680 EI79-6380*
Pan EI79-5410* EI79-6160*
Pan with extended rim EI79-5415 EI79-6165
Cover without ring EI79-5400* EI79-6150*
Cover w/recessed center ring EI79-5405
Note: For stainless steel rim sieves add "/S" to the catalog numbers above.
Sieve Opening
Standard Alternate(mm) (in)
12" (305 mm)Diameter
8" (203 mm)Diameter
-
8/7/2019 sieve gradation
6/8
GradationS I E V E S
128
tel: 1-800-323-1242 fax:1-970-663-9781 web: www.eleusa.com
Wet Washing Sieves
ASTM E-11. Stainless mesh standard on all 8" (203 mm) diameter models. Optional models available with stainless steel back-up mesh.
Wet Washing Sieves are designed for wet testing of soils, cement, and other finematerials.
In the wet washing process, fines are washed through the sieve without loss of anyportion of the sample. In most applications, the water is sprayed into the sieve fora set time and under a specified pressure. After the fines have been washed
through, the residue which remains in the sieve is dried in the sieve prior to theweighing operation.
SpecificationsFrame. Brass.
Mesh. No. 200; brass on EI79-7010, stainless steel on EI79-7015,EI79-7025 series.
Weights. EI79-7010:Net 2 lbs. (0.9 kg).EI79-7015:Net 3 lbs. (1.4 kg).EI79-7025:Net 6 lbs. (2.7 kg).
Ordering InformationEI79-7010. 3" diam. x 3-1/2" h.x 3" depth to mesh (76 x 89 x 76 mm).EI79-7015. 8" diam. x 4-1/2" h. x 4" depth to mesh (203 x 114 x 102 mm).EI79-7020. Same as EI79-7015 with No. 26 back-up mesh.EI79-7025. 8" diam. x 8-1/2" h. x 8" depth to mesh (203 x 216 x 203 mm).EI79-7030. Same as EI79-7025 with No. 26 back-up mesh.
Wet Washing Spray AttachmentASTM C-115, C-430.
Machined brass nozzle construction. 30 psi (207 kPa) pressure gauge. Standard pipe fittings for mounting on a laboratory water line
system.
The Wet Washing Spray Attachment is used to control the water pressure andspraying flow during wet washing procedures.The unit consists of a machinedbrass spray nozzle, valve and pressure gauge.
SpecificationsSpray Nozzle. Machined brass.
Gauge. 30 psi (207 kPa) capacity.
Fittings. Standard pipe.
Weight. Net 11 lbs. (5 kg).
Ordering InformationEI79-7040.
Sieve Brushes
To avoid damage, Sieve Brushes are recommended for use in cleaning the wirecloth and frame of the test sieve.
SpecificationsConstruction. EI79-7220: Stiff bristles with wood handle;
1-1/4" diam.x 5-3/4" l. (32 x 146 mm).
EI79-7225: Fine hair bristles with wood handle;1" w. x 10-1/2" l. (25 x 267 mm).
EI79-7230:Wire bristles with wire loop handle.1-1/4" w. x 5-1/2" l.(32 x 140 mm).
Weight. Net 1 oz. (28 g).
ModelsEI79-7220. For fine sieves.EI79-7225. For fine sieves.EI79-7230. For coarse sieves.
-
8/7/2019 sieve gradation
7/8
129tel: 1-800-323-1242 fax:1-970-663-9781 web:www.eleusa.com
GradationS A M P L E S P L I T T E R S
Large Capacity Sample Splitter
Adjustable chute widths. Lever-actuated, clamshell type hopper. Chute attachment for direct loading of one half of final
sample into container or bag.
The Large Capacity Sample Splitter is designed for samples too large in volume forconvenient handling.This heavy-gage welded steel splitter divides samples so thathalf is representative of the original sample. It handles any material from sand sizesup to 4" (102 mm).The lever-actuated hopper holds up to 1 cu. ft. (0.028 m3) ofmaterial.
The universal chute section design consists of a set of aluminum bars that pivot ona rod at their lower ends.The top ends of the bars are flipped to alternate sides toform the desired chute width. Each chute bar is 1/2" (13 mm) wide so that adjust-ment is provided for any increment of 1/2" which will divide into the total 24"(610 mm) chute width an even number of times. Chute widths of 1/2", 1", 1-1/2",2", 3", 4", or 6" may be selected by proper positioning of the bars.
SpecificationsCapacity. 1 cu. ft. (0.028 m3); for sand sizes up to 4" (102 mm).
Hopper. Lever-actuated, clamshell design.
Chute Bars. 48 aluminum bars, 1/2" (13 mm) width.
Chute Area. 24" (610 mm) overall width.
Chute Openings. Adjustable; 1/2", 1", 1-1/2", 2", 3", 4", or 6".
Frame. Welded, heavy-gage steel.
Chute Attac hment. Replaces pan to allow sample collection in bag;28-1/4" l. x 7"w. x 5-1/2" h.(718 x 178 x 140 mm).
Material Pans. Two included; 25-3/4" l. x 9" w. x 6-1/2" h.(654 x 229 x 165 mm).
Ov erall Dimensi ons . 29" l. x 19" w. x 39" h. ( 737 x 483 x 999 mm) .
Weight. Shpg. 142 lbs. (64 kg).
Ordering Information
Note: Includes two pans and chute attachment.
EI23-3425.
AccessoriesEI23-1420. Sample Bag. 10" x 18" (254 x 457 mm).EI23-1422. Sample Bag. 17" x 32" (432 x 813 mm).
Replacement PartsEI23-3425/10. Material Catch Pan.
Sample Splitters (Riffles)ASTM C-136,C-702, D-271, D-421, D-492;AASHTO T-27, T-87,T-248.
Short, steep channels for rapid flow and easy cleaning. Stainless steel hopper for rust resistance and long life . Includes three pans, scoop and cleaning brush.
The ELE Sample Splitters are designed for dividing or halving dry materials such assoils, sands, cement, gravel, powdered ores, coal, and similar material.The materialspoured into the hopper are divided into two equal por tions by a series of chuteswhich discharge alternatively in opposite directions into two separate pans.
Each Sample Splitter includes a stainless steel hopper supported on a painted steeframe, three pans, a flat-type scoop and a cleaning brush.
SpecificationsChutes. Stainless steel.
Hopper. Stainless steel.
Frame. Painted steel.
Hopper Dimensions. EI23-3052: 6" x 9-3/4" (152 x 248 mm).EI23-3102: 7" x 13" (173 x 330 mm).EI23-3152: 9-5/8" x 19-1/4" (244 x 489 mm).EI23-3302: 9-3/4" x 19-1/4" (248 x 489 mm).EI23-3352: 9-5/8" x 23-1/2" (244 x 597 mm).
Weights. EI23-3052: Net 9 lbs. (4.1 kg).EI23-3102: Net 22 lbs. (10 kg).EI23-3152: Net 23 lbs. (10.4 kg).EI23-3302: Net 37 lbs. (16.8 kg).EI23-3352: Net 39 lbs. (17.7 kg).
Ordering Information
Note: Includes three sample pans, scoop and brush.
EI23-3052. 14 chutes, 1/2" (13 mm) chute width.EI23-3102. 14 chutes, 3/4" (19 mm) chute width.EI23-3152. 16 chutes, 1" (25 mm) chute width.EI23-3302. 8 chutes, 2" (51 mm) chute width.EI23-3352. 8 chutes, 2-1/2" (64 mm) chute width.
-
8/7/2019 sieve gradation
8/8
Precision Sample Splitters
Stainless steel and aluminum alloy construction for rustresistance and long life.
Convenient cut-off gate control. Includes two sample pans.
This line of splitters has been developed to meet the requirements of reducingsmall size samples in the field or laboratory. Constructed of stainless steel andaluminum alloys, these splitters incorporate a cut-off gate which stops the flowof materials from the hopper.
The Precision Sample Splitter is ideally suited for use in fine powdered or pulver-
ized materials which frequently tend to segregate.
SpecificationsSplitter Blades. Stainless steel.
Cut-Off Gate. Lever operated.
Hopper Dimensions. EI23-3360: 2-1/16 x 3-3/4" (52 x 95 mm).EI23-3370: 6-5/8" x 8-15/16" (168 x 227 mm).EI23-3380: 6-7/8" x 7-15/16" (175 x 202 mm).
Weights. EI23-3360:Net 2-1/2 lbs. (1.1 kg).EI23-3370:Net 7-1/2 lbs. (3.4 kg).EI23-3380:Net 11 lbs. (5 kg).
Ordering Information
Note: Includes two sample pans.
EI23-3360. 14 chutes, 1/8" (3.18 mm) blade width.EI23-3370. 32 chutes, 1/4" (6 mm) blade width.EI23-3380. 16 chutes, 1/2" (13 mm) blade width.
Aggregate Scoop Pan
Stainless steel construction. Tapered design for easy control material flow.
The aggregate scoop pan has a tapered design to simplify the control of granularmaterials into splitters, shakers or sieve sets.
SpecificationsConstruction. 18 gauge stainless steel; o ne fixed and one bail handle.
Dimensions. 27-3/8 x 12-1/4: x 3-15/16: d. (695 x 311 x 100 mm).
Weight. Net 8 lbs. (3.6 kg).
Ordering InformationEI23-3390.
130
GradationS A M P L E S P L I T T E R S
tel: 1-800-323-1242 fax:1-970-663-9781 web: www.eleusa.com