Download - T4.3 MacNeil Studio Manual
-
8/13/2019 T4.3 MacNeil Studio Manual
1/19
Miskin Music
Studio: A
Manual/Guide
-
8/13/2019 T4.3 MacNeil Studio Manual
2/19
Studio Plan
this is a birds eye view of the studio complex.
- Make sure you take note of where each exit, fire
exit/alarms/extinguisher are situated within the complex. he fire
alarms within the studios have visual indicators for obvious
reasons, relating to auditory difficulties in hearing while mixing
around loud speakers. !n the event of a fire, the assembly point is
located on the sports field east of the venue. IMPORTANT: thereis a raised platform in the walkway between "tudio# $ and %ive
&oom# $.
- !t is important that all cables etc. are either taped or made
known to the users and visitors of the studio, to avoid trip
ha'ards. $lso obstructions should be noted in walkways for similar
reasons.
-o ensure the safety of the e(uipment itself and maintain overall
-
8/13/2019 T4.3 MacNeil Studio Manual
3/19
hygiene and cleanliness, there is absolutely no food or drink
allowed on site.
-$ll $)/*) plugs are to be annually +$ +ortable $ppliance est
tested to ensure the safety of engineers and visitors alike. $llcables should be checked regularly.
Studio Control Room: A, Floor Plan
$bove is a basic, asterisked plan of the e(uipment in "tudio $,
complete with the order of connections.
0 1&1 23 monitor speakers.4567 +ower 8utput
467 9igh :re(uency
467 %ow :re(uency-;6d< - =>d
-
8/13/2019 T4.3 MacNeil Studio Manual
4/19
;> !nput, 5 "tereo )hannels, *uel :aders on each channel
=53v +hantom +ower
5 $uxiliaries selectable pre/post
3 "ends
;A4 +oint +atch 0 8utboard 2(uipment.see pg 6
H 0 2volution M1;> Midi controller keyboard.+itch bend
8ctave change
Modulator
5I keys
3 0 Mac +ro*ual processor systems
4-core software with %ogic +ro I and @
-
8/13/2019 T4.3 MacNeil Studio Manual
5/19
The Uses of a Channel
here are two uses of a channel on a console and they are mixing
and recording. Mixing involves changing the outputs via the
soundcard to appear on the mixer. he positives and negatives of
doing something like thisJ positives include, you have more
control over your mix, also you can use real outboard gear as
apposed to a cc fabricated copy. Kegatives includeJ you must
have both a mixer and enough soundcard outputs to cope withyour mix, also any outboard gear you want to use. he expense -
beyond that if you dont finish your mix, someone may utili'e the
desk in your absence dissembling the channels and settings on
the mixer. 8n an analogue mixer you cannot save your settings,
unlike the reliability software.
&ecording involves passing a signal through the desk, and into
the )+E via a soundcard. !t is practical to do this because it is
easier to find a level at which you are happy with and you canalso edit sounds while they are being recorded. he issue with
editing on the way into the computer is that once it is recorded,
you are unable to alter your track.
he )hannel "trip
Koise Gate
Gain Control: the levelbetween the input level of adevice to the mixer and the
output level of the mixer intothe speaker. he gain is usuallyin decibels and can go intonegative numbers as well aspositive numbers depending onwhether you want to increase or
Phantom Power: a direct current *)voltage sent through a cable to power adevice. !t is used most commonly withcondenser microphones but issometimes used to power *! boxes andpedals. !t is usually 53 volts but can beas low at 4. he microphone or otherdevice will take as much voltage as itneeds. he phantom power on thechannel strip can be applied to themicrophone input by pressing the =53?
ine Swit!h:his selects theline input socket to switchfrom M!) to %!K2.
Su"
-
8/13/2019 T4.3 MacNeil Studio Manual
6/19
he )hannel "trip continued "helf 2F
"emi-+arametric 2F
$uxillaries
&F:his section is a shelving2F and can boost or cut Ad669' - 4k9'and then boost or cut it byAd
-
8/13/2019 T4.3 MacNeil Studio Manual
7/19
he )hannel "trip continued
+anning, :ading, "ending and Mixing
C& PAN:he )9 +$K controldetermines the position of thesignal within the stereo %-&image and routes the signal to anyof the eight buses depending onwhich bus group is selected. 2g.
-
8/13/2019 T4.3 MacNeil Studio Manual
8/19
he )hannel strip continued
Monitoring
MON PAN:his pans thesignal across the stereo bus,either left or right, at a leveldetermined by the longthrowmonitor fader. !f panned tothe left, the signal from thatchannel will be sent to theleft monitor and vice versa.his is useful when mixingand layering to widen thesound.
SOO:he solo button mutes
all the other monitors.
CUT:his mutes the monitor
path chosen.
P)A0:his illuminates whenthere is less that >d< ofheadroom remaining at threeplaces in the signal.
chainJ in ut re-am , the
C& ACTI/):his monitorsthe output of the inputpreamp and illuminates ifthe level exceeds -46d
-
8/13/2019 T4.3 MacNeil Studio Manual
9/19
i1e Room: A, Floor Plan
0 "tage
-
8/13/2019 T4.3 MacNeil Studio Manual
10/19
The Out"oard )2ui(mentT AudioParametri!)3
his 2F canboost or cutata specific
fre(uency.
diom(ressormpression is
ed to makedio morensistent innamic range
4oe Mee56Mee2uali7ser8his e(ualisercan changethe sound ofan instrumentby alteringthe high, mid
or lowfre(uencies
Mee5m(ressormpression isd to makeo more
sistent inamic range
Fo!usritePream( 9Re!tifierPream($ preamp isan electronicamplifierwhich preparesan electronicsignal forfurtheramplification orprocessing.
Alesis TwinCom(ressor a
fantastic
compressor for
a side chaineffect
d(hone(lifiereadphoneplifier isan audio
plifiergnedicularly toedphonesead ofspeakers.
Power
Stri(
and *iie!ts
is aerb andrus unitd forducingh effects.
Son *elaUnit*elay is anaudio effectwhich playsback audio aftera controlledperiod of time.
maha
e!ts Unit a
tal
tieffect
cessor with
malgam of
erent
ctions.
-
8/13/2019 T4.3 MacNeil Studio Manual
11/19
The Pat!h .ahe patch bay is used to route and re-route signals
between the mixing desk and outboard e(uipmentand make inputs and outputs which are usually
tucked away, easily accessible.
-
8/13/2019 T4.3 MacNeil Studio Manual
12/19
S(readinGiven the aforementioned difficulties that occur with mixing on
the desk, that being the lack of continuity of your settings youmay prefer the manual approach to mixing, as opposed tomousing around on a %ogic arrange page. o spread yourrecording across the desk, open up the mixer on the arrange pageon %ogic. Kext, click and hold where it says "tereo 8ut and on thedropdown menu, select 8utput. Lou will then be presented withthe following options# =4, ;=5 and A=> and so on. "inglechannels will not be available so to rectify this, select the groupand +$K the channel on %ogicJ full left for channels ,;,A,H, whathave you or full right for channels 4,5,>,3 etc. :ollowing this you
can continue your mixing the old fashioned way with a moreNhands on approach.
Routin throuh the Com(ressor *urinand Post Re!ordin+rimarily a channel will need to be selected to record onto. :orinstance if you are using !nput of the stage box, the signal willbe received on channel 44 on the mixing desk. Kext on the list is
to find channel 44 on the patch bay and link, via bantam lead,from the N!K" "K* pot to the left input of the compressor that youare using. hen you must link one more bantam lead from therespective compressors left 8E+E to the N!K" &2 pot on thesame channel.
o route to the compressor after recording you will need to togglethe abovementioned N&2?
-
8/13/2019 T4.3 MacNeil Studio Manual
13/19
Re!ordin *rums =Multi7Tra!5Re!ordin>
Mi!ro(hone Sele!tion?
The 0i!5!n terms oforder, when micing up a drum kit,we start with the kick drum. !n thestudio we use an $udix :5microphone. his is a dynamicmicrophone with a tailoredfre(uency response of ;6 9' - 6k9'. !t has a much wider
diaphragm and so is specificallydesigned to ear much lower
fre(uencies. $ condenser microphone is not used as they are toosensitive for a kick drum. !t has a cardioid polar pattern tominimi'e feedback and isolate the drum from the others.Microphone placement is a big factor of the sound producedJwhether the microphone is placed inside the hole or outside on astand, how big the hole is, how many inches from the outside,what angle the microphone is at etc. he kick drum is connected
to the stage box via @%& cable and is commonly in input one Ochannel twenty two.
The Snare Kext on the list typically is the snare drum. :or thiswe use two microphonesJ one for the bottom and one for the top.:or the top we use the ever versatile "hure "MAH. !t is a dynamiccardioid directional microphone and is the industry standardinstrument microphone. !t has afre(uency response of 56 9' - A,666 9'. his is placednear the snare pointing towards the centre of the skin. !t is
commonly inserted into input 4 of the stage box.)urrently for the bottom side of the snare we use a
-
8/13/2019 T4.3 MacNeil Studio Manual
14/19
"ennheiser 23;A which is another directional, dynamicmicrophonewith a cardioid polar pattern and as a slightly less bright responseto the
AH. !t is nigh on identical in terms of sound (uality to the "hure"MA3 thebrother of the AH. $gain it is aimed directly at the centre of theskin and typically third in line for the stage box. 8f course it notbeing on the batter side of the snare, this proves far lesschallenging. !t is important to mic. the bottom of the snare as it isarguably one of the most essential parts of the kit, so it needssubstance to it.
-
8/13/2019 T4.3 MacNeil Studio Manual
15/19
Mi!ro(hone sele!tion !ontinued ?
The TomsKext on the list, the toms are miced with $udix :6s.his is a dynamic microphone with a cardioid polarpattern to pick up direct signals and minimi'e feedback.!t has a fre(uency response of A6 9' - 4,666 9' makingit good for picking up mid-bass and mid-high sounds.
he microphone is put onto a microphone clip onto thelug of the drum pointing, again towards the centre of theskin of the. hey are often plugged into input 5 A on the stage box. ypically, the rack tom is
ordered before the floor tom.
The &atshen cometh the 9i-9ats. hey are miced withthe $udix :A. his is a condenser microphone to get acrisp, clear hi-hat sound. !t has a fre(uency response of669' - 46 k9'. !t has a wide cardioid polar pattern alongwith high sensitivity. he mic is positioned >C above thehi-hat towards the centre to get the full spectrum ofsounds from the high hat. !t is commonly plugged intoinput > on the stage box.
The O1erheads%ast but certainly not least are the overheads. !nthe studio we use 4 Keumann 1M35s for overheads to recordoverall sound and also they are great at picking up cymbals. heyare condenser microphones with afre(uency range of 46 9' - 46,666 9'. heyhave a cardioid polar pattern to reducefeedback. here are multiple ways toposition these microphones one being the@L position, where the microphones areplaced at I6P from each other, central tothe kit hanging above. he other is spacedwhere the microphones are placed at e(ualradial distances from the snare drum either side of the kit. @Lplacement picks up more of the entire sound and is an optimumrecording techni(ue with such a small live room. he spacedmicing method is more suited to a much larger recording space.
hey are commonly plugged into input H 3 on the stage boxand panned left and right on the desk, dependant on which side
-
8/13/2019 T4.3 MacNeil Studio Manual
16/19
of the kit they are directed at. :or instance with the @L techni(ue,the right microphone would be panned left as it is facing the lefthand side of the kit in the I6P angle. "o for the spaced methodyou could either switch the leads round or inverse the panning on
the desk. 7hen using two condenser microphones so closetogether it is important to use phase inversion.
-
8/13/2019 T4.3 MacNeil Studio Manual
17/19
Mi!@ Positionin ?
$s mentioned above, the @L is the primepositioning for the overheads in the live room. "olike the photograph, right only above the kit.
$gain the kick drum is a world of variation and preference when itcomes to micing it up. his is thestandard way of micing the kick drum, it isgood for an overall sound, a happymedium some would say. Keither in nor
out. !f you wanted more texture to thesound and more of a higher and brighterend of the spectrum, there are severalthings you can do. 8ne is move themicrophone closer to the batter side of the kick drum inside thedrum. $nother is to mic. up the other side of the kick as well. Loumay want a deeper sound and less high end fre(uencies sonaturally you would do the inverse and move the mic. furtheraway but the problems that occur with this techni(ue is that youget too much bleed from other parts of the kit. $ way to alleviate
this, though is notrecommended for such asmall space is to build a kickdrum tunnel. here areseveral ways to do this. 9ereis an example of someoneusing mic. stands, carpets,foam and blankets. !n mypersonal experience sleeping
mats and or insulation foamdo Dust as well.
-
8/13/2019 T4.3 MacNeil Studio Manual
18/19
Mi!@ Positionin !ontinued ?
he "nare drum is fairly simple, you Dust have to ensure like withall of the stick-hit drums that the microphone is not obstructingthe performance of the drummer in any way but all the while stilldirected at the centre of the skin.!t doesnt sound pretty when adrummer or percussionist hits the microphonewith the drumstick. !n this picture righttheyre lucky enough to have a rim clip but inthe live room we use a boom mic. standwhich proves some what more difficult in
terms ofmanoeuvrability.he bottom ofthe snare is farless difficult to mic up. 7ith a smallstand it is easy position a mic. toface the middle of the skin. 7henusing stands it is important toensure that none of the hardware is
interacting with each other. :or instance, if you have a boom mic.
stand running past a rack tom and the stand is in contact with thetom itself, it wont serve the microphone well when the drummerhits the tom.
9ere is an example of a how a tomshould be miced up, in terms ofangle.
9ere is a fine exampleof how 9i-9ats shouldbe miced up.
-
8/13/2019 T4.3 MacNeil Studio Manual
19/19
hat Comes Ne+tB
7hen you have established a signal from the live room on thedesk for the drum kit, the next step is finding the appropriatelevels for your drums in your mix, for your first time this will beguess work but theres nothing particularly complicated about it.
o do this without a recording you will need someone in the liveroom hitting each drum individually to line check and then all ofthem in a beat to check the levels of the overheads. Lou can usethe fader to change the levels or keep the faders level and simplyuse the gain pot at the top of the channel strip. $n optimum levelis ->d