Download - TECO e-motion Product Highlights
2
Type Code (Catalogue Number) Range
Aluminium: ALAA-0132M0-10004-IO Frame Size 63 to 160Cast Iron: ALCA-0315D1-10002-IO Frame Size 80 to 315 (400)
Housing MaterialFrame SizeCore LenthPolesI = IEC/ O = no; Z = with accessories
TECO e-motion Product Highlights
3
IE2 and IE3same mechanical design (same outline dimensions)
Same power as Siemens in Frame size 315
TECO e-motion Product Highlights
4
Total Flexibility Detachable feet up to and including frame size 315 Symmetric motor design for terminal box in front or back of the motor 2 eye bolts for no influence of eye bolts to cable entry from back Revolving terminal box by 90° steps
Frame Size 80 Frame Size 315
TECO e-motion Product Highlights
5
Total FlexibilityReal multi mount because all feet fixings are pre-drilled, taped and plugged. All feet are replaceable due to stator and feet being fully machined before assembly
Frame Size 80 Frame Size 315
TECO e-motion Product Highlights
6
Kit Design (for easy customizing with accessories) Slot on top of stator core (enable wiring from NDE to TB)
Neutral Design with easy Brand change on Nameplate Plastic base-plate with brand-clip design
3 Winding Termistors PTC 150 standard on all motors (termistor terminals mechanically firmly fixed in main terminal box)
TECO e-motion Product Highlights
7
Regreasing standard from frame size 180 and above Fixed bearing is on drive end Top quality bearings fitted from SKF; FAG, NSK or NTN 63.. Bearing size on DE standard for improved radial forces
TECO e-motion Product Highlights
8
Improved shaft sealing (spring loaded v-ring with dust protection lip) on DE and NDEUsable as wet seal (oilseal) for direct gearbox mounting by turning 180°
TECO e-motion Product Highlights
1-metal ring2-sealing lip3-hose spring4-dust protection lip
A-ShaftB-HousingC-Inside MotorD-Ambient
9
Accessories connection with spring loaded serial terminals from Frame Size 160 and above
TECO e-motion Product Highlights
10
Cable entry plate (open for top access) from Frame Size 160 and above in Standard
Manufactured acc. to major ship building authorities specifications (LR; GL; BV; DNV) with manufacturer self declaration for non essential service use
Alignment holes from Frame Size 280 and above
Moveable Lifting lugs After the motor feet have been moved the customer can move the two lifting points to match the new mounting safely
TECO e-motion Product Highlights
11
Drilled and tapped cone hole for simple SPM nipple mounting from Frame Size 280 and above
TECO e-motion Product Highlights
12
Screws with tensile strength of 8.8 is standard All external screws are hexagonal design Grounding screw at housing (plus further 3 drilled and tapped access
points in case of modified TB position)
TECO e-motion Product Highlights
13
reduced contact resistance at winding connections from Frame Size 225 and above (hexagonal crimping)
TECO e-motion Product Highlights
14
IE2 and IE3 same mechanical design (same outline dimensions) Same Power as Siemens in Frame Size 315 Total Flexibility
Detachable feet up to and including frame size 315 Symmetric motor design for terminal box in front or back of the motor 2 eye bolts for no influence of eye bolts to cable entry Revolving terminal box by 90° steps
Kit Design (for easy customizing with accessories) Slot on top of stator core (enable wiring from NDE to TB)
Neutral Design with easy Brand change on Nameplate Plastic base-plate with brand-clip design
3 Winding Termistors PTC 150 standard on all motors (termistor terminals mechanically firmly fixed)
Regreasing standard from frame size 180 and above (button design nipples)
Fixed bearing standard on drive end Improved shaft sealing (spring loaded v-ring with dust protection lip) on
DE and NDE Accessories connection with spring loaded serial terminals from Frame
Size 160 and above
TECO e-motion Product Highlights
15
Cable entry plate (open for top access) from Frame Size 160 and above in Standard
Manufactured acc. to major ship building authorities specifications (LR; GL; BV; DNV) for manufacturer self declaration for non essential service use
Alignment holes from Frame Size 280 and above
Drilled and tapped cone hole for simple SPM nipple mounting from Frame Size 280 and above
Screws with tensile strength of 8.8 standard
All external screws are hexagonal
Grounding screw at housing (plus further 3 drilled and tapped access points in case of modified TB position)
reduced contact resistance at winding connections from Frame Size 225 and above
Moveable Lifting lugs After the motor feet have been moved the customer can move the two lifting points to match the new mounting safely
TECO e-motion Product Highlights