teco e-motion product highlights

1

TECO e-motion Product HighlightsTECO e-motion Product Highlights

2

Type Code (Catalogue Number) Range

Aluminium: ALAA-0132M0-10004-IO Frame Size 63 to 160Cast Iron: ALCA-0315D1-10002-IO Frame Size 80 to 315 (400)

Housing MaterialFrame SizeCore LenthPolesI = IEC/ O = no; Z = with accessories

TECO e-motion Product Highlights

3

IE2 and IE3same mechanical design (same outline dimensions)

Same power as Siemens in Frame size 315


4

Total Flexibility Detachable feet up to and including frame size 315 Symmetric motor design for terminal box in front or back of the motor 2 eye bolts for no influence of eye bolts to cable entry from back Revolving terminal box by 90° steps

Frame Size 80 Frame Size 315


5

Total FlexibilityReal multi mount because all feet fixings are pre-drilled, taped and plugged. All feet are replaceable due to stator and feet being fully machined before assembly

Frame Size 80 Frame Size 315


6

Kit Design (for easy customizing with accessories) Slot on top of stator core (enable wiring from NDE to TB)

Neutral Design with easy Brand change on Nameplate Plastic base-plate with brand-clip design

3 Winding Termistors PTC 150 standard on all motors (termistor terminals mechanically firmly fixed in main terminal box)


7

Regreasing standard from frame size 180 and above Fixed bearing is on drive end Top quality bearings fitted from SKF; FAG, NSK or NTN 63.. Bearing size on DE standard for improved radial forces


8

Improved shaft sealing (spring loaded v-ring with dust protection lip) on DE and NDEUsable as wet seal (oilseal) for direct gearbox mounting by turning 180°


1-metal ring2-sealing lip3-hose spring4-dust protection lip

A-ShaftB-HousingC-Inside MotorD-Ambient

9

Accessories connection with spring loaded serial terminals from Frame Size 160 and above


10

Cable entry plate (open for top access) from Frame Size 160 and above in Standard

Manufactured acc. to major ship building authorities specifications (LR; GL; BV; DNV) with manufacturer self declaration for non essential service use

Alignment holes from Frame Size 280 and above

Moveable Lifting lugs After the motor feet have been moved the customer can move the two lifting points to match the new mounting safely


11

Drilled and tapped cone hole for simple SPM nipple mounting from Frame Size 280 and above


12

Screws with tensile strength of 8.8 is standard All external screws are hexagonal design Grounding screw at housing (plus further 3 drilled and tapped access

points in case of modified TB position)


13

reduced contact resistance at winding connections from Frame Size 225 and above (hexagonal crimping)


14

IE2 and IE3 same mechanical design (same outline dimensions) Same Power as Siemens in Frame Size 315 Total Flexibility

Detachable feet up to and including frame size 315 Symmetric motor design for terminal box in front or back of the motor 2 eye bolts for no influence of eye bolts to cable entry Revolving terminal box by 90° steps

Kit Design (for easy customizing with accessories) Slot on top of stator core (enable wiring from NDE to TB)

Neutral Design with easy Brand change on Nameplate Plastic base-plate with brand-clip design

3 Winding Termistors PTC 150 standard on all motors (termistor terminals mechanically firmly fixed)

Regreasing standard from frame size 180 and above (button design nipples)

Fixed bearing standard on drive end Improved shaft sealing (spring loaded v-ring with dust protection lip) on

DE and NDE Accessories connection with spring loaded serial terminals from Frame

Size 160 and above


15

Cable entry plate (open for top access) from Frame Size 160 and above in Standard

Manufactured acc. to major ship building authorities specifications (LR; GL; BV; DNV) for manufacturer self declaration for non essential service use

Alignment holes from Frame Size 280 and above

Drilled and tapped cone hole for simple SPM nipple mounting from Frame Size 280 and above

Screws with tensile strength of 8.8 standard

All external screws are hexagonal

Grounding screw at housing (plus further 3 drilled and tapped access points in case of modified TB position)

reduced contact resistance at winding connections from Frame Size 225 and above

Moveable Lifting lugs After the motor feet have been moved the customer can move the two lifting points to match the new mounting safely


teco e-motion product highlights

Documents