25 Tiburon St., San Rafael, CA 94901 | 415-454-4868 | [email protected] | www.vertrod.com
thermal impulse heat sealers
User friendly controls
vertrod htvvertrod sealers
adjustable shelf Bi-active sealing jaws
sPeCifiCations seal lengths 4”, 8”, 14”
seal width 1/4” standard
electrical 115v, single phase standard
featUres & Benefits
oPtions & aCCessories
to select the correct seal length allow approximately ½” ybetween flattened tubes along the sealing jawone (1) tube holder yone (1) tube mask yadjustable shelf for tube holder yBi-active sealing jaws for thick wall tubes over 20 mil y1/4” wide seal yWater cool ready heater bars y
extra tube holder(s) yextra tube mask(s) ytemperature controller with digital readout ysmall water re-circulating system y
time based thermal impulse control system yseal cycle-cool cycle yManual, hand operated y
Member of PAC Machinery Group
ManUal, tUBe sealer
the Vertrod manual hand operated tube sealer is ruggedly constructed. they are designed for short production runs and sample making requirements. designed for quick “turn around” of sizes of tubes. re-tooling is fast and efficient.
this series of heat sealers are available in several different working lengths to fit your needs. approximately two to four rack loads of tubes can be sealed per minute*. the features listed below are for the standard tube sealer configuration.
*Production speeds may vary by material or operator skill level